round jagged nail - Gunnebo Industries

ROUND JAGGED NAILHOT DIP GALVANIZEDDeclaration ofPerformanceSTRAIGHT & PLASTIC COLLATED 17°DIMENSIONSHOT DIP GALVANIZEDNominalName diameter d[mm]2,8x50 2,82,8x652,8x753,1x90 3,1Dokument no: CE-300159-A2Ued for timber items, such as timberstudding. Also used for fitting panels,tongued and grooved board, secondaryspaced boarding, laths, etc.Dimensions:d: 2,8 - 3,8 mm L: 50-130 mmMaterial:EN ISO 16120-2Characteristic tensile strength of wire (fu) inacc. with EN 10218-1, min. 600 N/mm 2Treatment:Hot dip galvanized - min. 50 µmAngle of strip:Straight & plastic collated 17°Straight & plastic collated 21°Straight & plastic collated 34°Total lenght L[mm]49,563,573,588,0Head diameterd h [mm]Head area A h[mm²]Head thicknesst [mm]Point lenght l p[mm]6,6 34,2 1,0 3,9 40°6,634,2 1,0 4,3 40°Angle of point[°]CHARACTERISTIC LOAD CAPACITYHOT DIP GALVANIZEDNameNominalHead pulltroughTotal lenght L Withdrawal parameterYield moment M Tensil capacity f tens,kdiameter dparameter f y,k[mm] f ax,k [N/mm²]*head,k[Nmm][kN][mm][N/mm²]*2,8x50 2,8 49,53,7 18,5 2700,04,32,8x6563,52,8x7573,53,1x90 3,188,0 4,0 17,1 4200,0 4,9ITT-rapportDK 474099DK 474099* Värden för utdragshållfasthet f ax,k och genomdragshållfasthet f head,k är baserat på en karakteristisk virkesdensitet ρ k =350 kg/m 3 (C24). Vid beräkningar med andra virkeskvaliteter multipliceras värden med ρ k /350.PRODUCT IDENTIFICATIONFollowing articles which are sold in the brand name GUNNEBO FASTENING are covered by thisDeclaration of Performance:ARTICLE NUMBER69917 69918 69919 69920324 325 326 3272012-08-17, Rev. 2013-04-03, Page 1 of 4 Document no: CE-300159-A2

ROUND JAGGED NAILHOT DIP GALVANIZEDDeclaration ofPerformanceSTRAIGHT & PLASTIC COLLATED 21°DIMENSIONSHOT DIP GALVANIZEDNominalName diameter d[mm]2,8x50 2,8Total lenght L[mm]Head diameterd h [mm]Head area A h[mm²]Head thicknesst [mm]Point lenght l p[mm]49,5 6,6 34,2 1,0 3,9 40°2,8x65 63,52,8x75 73,53,1x90 3,1 88,06,6 34,21,0 4,3 40°3,8x120 3,8 120,0 8,0 50,2 1,0 5,240°3,8x130 130,0Angle of point[°]CHARACTERISTIC LOAD CAPACITYHOT DIP GALVANIZED2,8x50NameNominaldiameter d[mm]Total lenght L[mm]Withdrawal parameterf ax,k [N/mm²]*Head pulltroughparameter f head,k[N/mm²]*2,849,53,7 18,5 2700,0Yield moment M y,k[Nmm]Tensil capacity f tens,k[kN]4,3ITT-rapportDK 4740992,8x652,8x753,1x903,8x1203,8x13063,573,53,188,04,0 17,1 4200,04,93,8120,0130,04,1 20,3 6976,0 6,1DK 474099E-30-20108-13* The withdrawal parameter f ax,k and the head pull-through parameter f head,k is tested in wood with a characteristic density of ρ k =350kg/m 3 (C24). When wood with another density is used values shall be multiplied with ρ k /350.PRODUCT IDENTIFICATIONFollowing articles which are sold in the brand name GUNNEBO FASTENING are covered by thisDeclaration of Performance:ARTICLE NUMBER69921 69922 69923 69924 70366 70367311 312 313 3142012-08-17, Rev. 2013-04-03, Page 2 of 4 Document no: CE-300159-A2

ROUND JAGGED NAILHOT DIP GALVANIZEDDeclaration ofPerformanceSTRAIGHT & PLASTIC COLLATED 34°DIMENSIONSHOT DIP GALVANIZEDNameNominaldiameter d[mm]Total lenght L[mm]Head diameterd h [mm]Head area A h[mm²]Head thicknesst [mm]Point lenght l p[mm]2,8x75 2,873,56,6 34,2 1,0 3,9 40°3,1x90 3,1 88,06,6 34,2 1,0 4,340°Angle of point[°]CHARACTERISTIC LOAD CAPACITYHOT DIP GALVANIZEDNameNominalHead pulltroughTotal lenght L Withdrawal parameterYield moment M y,k Tensil capacity fdiameter dparameter f tens,k[mm] f ax,k [N/mm²]*head,k[Nmm][kN][mm][N/mm²]*2,8x75 2,8 73,53,7 18,5 2700,0 4,33,1x90 3,1 88,04,0 17,14200,0 4,9ITT-rapportDK 474099DK 474099* The withdrawal parameter f ax,k and the head pull-through parameter f head,k is tested in wood with a characteristic density of ρ k =350kg/m 3 (C24). When wood with another density is used values shall be multiplied with ρ k /350.PRODUCT IDENTIFICATIONFollowing articles which are sold in the brand name GUNNEBO FASTENING are covered by thisDeclaration of Performance:ARTICLE NUMBERZ713475 Z7134902012-08-17, Rev. 2013-04-03, Page 3 of 4 Document no: CE-300159-A2

ROUND JAGGED NAILHOT DIP GALVANIZEDDeclaration ofPerformanceThe manufacturer declares for:Round jagged nail plastic collated strip, hot dip galvanized,diameter 2,8 - 3,8 mm1. Product is in accordance with EN 14592:2008 “TimberStructures – Dowel-type fasteners – Requirements”.2. Initial Type Testing was performed to confirm essentialcharacteristic values in accordance to table ZA.1 in EN 14592.Declared values accompanies with the CE mark on each packageand in this technical document.3. Initial Type Testing is performed by:DTI, Danish Technological Institute. Notified body 1235ITT-rapport DK 474099Strojirensky Zkusebni Ustav s.p. Notified body 1015ITT report E-30-20108-134. For this product the compliance with the conditions of theAnnex ZA in EN 14592 are accomplished.5. A FPC system is established and maintained under theresponsibilities of the manufacturer.Hot dip galvanized - 50 µm, type 1. Service class 3.The system of attestation of conformity for Timber fasteners usedfor structural timber products is 3.This declaration of conformity is valid until any changes in theproduct, the raw material or the production process is performed,which would significantly change the declared characteristics.Gunnebo 2012-08-17, revised 2013-04-03.................................................................................Head of Operation, Claes ArnessonGbo Fastening Systems ABBruksvägen 2SE 590 93 GunneboSweden2012-08-17, Rev. 2013-04-03, Page 4 of 4 Document no: CE-300159-A2