Cable drag chain systems Overview - Eegholm

technikagkm.hu
  • No tags were found...

Cable drag chain systems Overview - Eegholm

ContentsIntroductionOpen cable drag chain systemsEnclosed cable drag chain systemsPerfect solutions . . . 4Advantages 6Overview: internal width/internal height 18Overview: models/travel distances 20Technical data: open cable drag chains 22Technical data: closed cable drag chains 30Information about ESD cable drag chains 34MP 10.1 37MP 14 38MP 15 39MP 18.1 40MP 18.2 41MP 3000 42MP 32 43MP 32.2 44MP 35 45MP 44 46MP 41 47MP 41.2 48MP 52.1 49MP 52.2 50MP 66 51MP 62.1 52MP 62.2 53MP 72 54MP 82.2 55MP 102.2 56Accessory/appendixMP 25 G 57MP 32.3 G 58MP 36 G 59MP 43 G 60MP 41.3 G 61MP 52.3 G 62MP 65 G 63MP 62.3 G 64MP 82.3 G 65VAW Variable guide channel systems 67Lowered moving end connection 70ZL Strain relief systems 71Sales agencies 763


Murrplastik Systemtechnikhas been supplying cabledrag chain systems for manyyears.The constant exchangeof information with our customershelps us to developnew innovative products, andalso to provide a continuousextension of our deliveryprogramme. This close relationshipwith the customerhas created cable drag chainsthat are of great value anduse to them.Our complete range of cabledrag chains includes: Cabledrag chains, guide channels,cables, strain relief, and assembly.Our chains have demonstratedtheir quality underthe most extreme permanentloads and environmental influences.In consultation with our customers,our experts select theright solution from our variedand extensive range of systemsto suit each customer’sindividual requirements. Assuch, we have developed aprocedure whereby we candetermine customer requirementsquickly and preciselyand find the right solution forthe customer's specific application.We recommend our handbookto assembly as a guide toproper arrangement for cabledrag chain systems and integratingthem into your facility.Philosophy of cabledrag chainsMurrplastik Systemtechnik offerscable drag chain systems withoptimum mechanical features andoutstanding application use for ourcustomers.5


Clean room chainsApplicationin sensitiveclean environmentsClean room cable drag chains from MurrplastikSystemtechnik are produced usingspecial materials. The cable drag chainsoffer premiere clean room properties. Withminimal abrasion, and hence particle purity,as well as outstanding discharge of electromagneticcurrents, these cable drag chainsset new standards.The discharge capacity fulfils the ATEXEuropean guidelines. Both characteristics,the discharge capacity and abrasion, havebeen tested and verified by respected institutions.In spite of the outstanding discharge andabrasion properties, Murrplastik neverthelessrefused to compromise in the slightestwhen it comes to functionality, reliabilityand easy of assembly.✔ Clean room classification byFraunhofer-Institut (IPA)✔ Fulfils the ATEX European guidelines✔ Uncompromising functionality✔ Unflinching reliability7


Foldable shelf systemExtremelyversatileFlexibility is the wordThe possibilities are endless with the shelfsystem.It is ridiculously easy to find the right configurationfor each individual requirement.The combination of the click lock and thefoldable shelf system even allows modificationsto be made when installed.The shelf separators lock firmly into theframe bridges and, once in place, they cannotslip.No matter what type of installation – horizontal,backwards, etc. – the cables stay inthe position that was originally intended.This means: a long service life and no unevenwear to the chain.✔ Easy assembly✔ REFA time and motion study conducted✔ Lockable separator,fixed position✔ Quick installation✔ Even when installedchanges can be made9


Chain bracketOptimalconnectionsFast and easy to assembleMetal bushes are injected permanently intothe plastic in the chain bracket. There aretwo types:a threaded bush and a normal one.Both types of bush inhibit cold flow propertiesduring screwing, thus effecting anextremely good fit. The threaded bush isscrewed directly without a nut.Safe and highly compact chain fasteningwith no fumbling.✔ No cold flow deformation✔Quick✔ Secure fastening✔ Compact11


Integrated strain reliefEconomic withtime and spaceSimple and safe strain reliefNo cumbersome special design for cablestrain relief. Everything is quick and safewith the Murrplastik cable drag chain system.Special strain relief frame bridges are usedon the chain bracket. The strain relief iseffected by cable ties. The cable is fixedon the strain relief plate on two sides. It isimpossible for the cable plate to slip downbecause the cable tie is securely enclosedby the plate.This integrated strain relief system is veryquick to assemble and is extremely economicalon space.✔ Easy to assemble✔ Compact construction✔ Economical✔ Saves space✔ Secure strain relief12


BiasAll types ofstressFlexible with a range of optionsLow installation height and narrow radii arebecoming increasingly important.These criteria are met by our chain linkswith back radii. This means a smaller radiusand no restriction on the position ofthe chain bracket.The design remains flexible and compactwithout compromising service life.✔ Installation space reduced(backwards)✔ Self supporting position increased(bias)✔ Improved gliding(without bias)✔ Service life prolonged13


High accelerationExtremestressesHigh acceleration –long service lifeAre you looking for cable drag chains whichcan cope with extremely fast accelerationand yet still guarantee long service life?Then look no further than Murrplastik Systemtechnik.During the design of our cable drag chains,the focus was on high acceleration ratesand long service life. The cable drag chainsshould not restrict you in the design of yourapplications.Even in extreme cases we will be pleasedto offer you chains which can withstandextreme stress along with expert advice onapplications.✔ Extreme accelerations✔ Long service life✔ High continuous load14


VAW guide channelsGuide channelsystemFor maximum speed assemblyThe VAW variable guide channel systemis harmonised for Murrplastik cable dragchains. The aluminium guide channel systemcan be adapted quickly to various typesand widths of chain.Assembly is quick and easy:The aluminium guide channel is securedwith clamping pieces on the base.No screwing or welding – simply press specialplastic pieces into the groove providedand a perfectly aligned join is establishedbetween two sections.This carefully designed guide channel systemsaves up to 70 % working time.✔ Quick and easy assembly.✔ High quality✔ Highly economical✔ Tailored system✔ Long service life15


FabricationFabricationEverything from one sourceReduce your labour costs and save time bytaking advantage of our experience in chainsystems gained over many years.At the customer’s request we assemblecomplete cable drag chains with cables.We handle the layout, assembly and orderingof individual components. The customeris supplied with a ready-made assemblywhich only needs to be fitted.Thanks to our experience of cable dragchains and cables acquired over manyyears, we can combine both elements inone system. This guarantees a long servicelife.✔ System guarantee✔ Easy handling✔ Saves time and hassle when ordering✔ Reduced warehousing costs16


Visible differentiationVisibledifferentiationExtreme areas of application require differentmaterials.The Murrplastik colour coding system enablesyou to recognise and classify differentmaterials and hence areas of applicationsafely and easily.Clear assignments, safe use – as with allMurrplastik products.✔ Murrplastik colour coding system✔ Black cable drag chains:Polyamide (PA): standard✔ Light grey cable drag chains:Polyamide (PA): ESD model✔ Oxide red cable drag chains:Polyamide (PA), UL 94/V0✔ Blue cable drag chains:Polypropylene (PP)17


Overview internal widthsInternal heightin mmChain typeModelopenclosedVariable widthESD(PA/light grey)VersionUL94/V0(PA/oxide red)Polypropylene(PP/blue)546Internal width in mm51849646844641839636834634331829629326824624322522021819619319010 10.1 r i i14 14 r15 15 r i i1818.1 r i i i18.2 r i i i25 25 G n i26 3000 r i i i32 r u l l l l l l l l l32 32.2 r u i i l l l l l l l l l32.3 G n u l l l l l l34 35 r36 36 G n38 43 G n40 44 r u41 r u l l l l l l l l l42 41.2 r u i i l l l l l l l l l41.3 G n u l l l l l l52.1 r u l l l l l l l l l52 52.2 r u i i l l l l l l l l l52.3 G n u l l l l l l6065 G n66 r u62.1 r u l l l l l l l l l l l62 62.2 r u i i l l l l l l l l l l l62.3 G n u l l l l l l l l l72 72 r u l l l l l l l l l l l8282.2 r u i i l l l l l l l l l l l82.3 G n u l l l l l l l l l102 102.2 r u l l l l l l l l l l l546518496468446418396368346343318296293268246243225220218196193190Internal width in mm18


Internal width in mm18217116815815014614414313312512111811510710510210196908786847671706256504541403731302625212018161596l l l l l ll l l ll l l ll l l l l ll l l l l ll l l l l ll l l l l l l ll l l l l l l l l l l l ll l l l l l l l l l l l ll l l l l l l l l l ll l l l ll l l ll l l l ll l l l l ll l l l l l l l l l l l ll l l l l l l l l l l l ll l l l l l l l l l ll l l l l l l l l l l l ll l l l l l l l l l l l ll l l l l l l l l l ll l ll l l l l ll l ll l ll l ll l ll l ll l ll l l18217116815815014614414313312512111811510710510210196908786847671706256504541403731302625212018161596Internal width in mm19


Overview models/travel distancesDimensionsOpening variantsChain typeInternal height Inside width Bending radiusin mmin mmin mmFrom To From ToNoneslitInsidebendfoldableOutsidebendfoldable10.1 10 6 41 18 58 n14 14 16 40 25 75 n15 15 16 40 25 75 n18.1n18 15 70 28 7818.2 n25 G 25 26 125 60 250 n3000 26 26 125 50 300 n3232.232 45 5468032.3 G 12025035 34 62 150 70 30036 G 36 62 125 80 200 n43 G 38 62 182 125 25044 40 45 182 90 2504141.242 45 5467541.3 G 15052.152.252 45 54610052.3 G 15065 G84 144 2006066 45 182 15062.162.262 118 51815062.3 G 20030035035050072 72 118 518 150 50082.215082 118 51882.3 G 200500102.2 102 118 518 250 50020


Opening variantsParametersInside bendengagesInside andoutsidebendengageInside andoutsidebendclick lockTravel distance Speed AccelerationUnsupported Gliding Unsupported Gliding Unsupported Glidingm m/s m/s²1.0 10.0 4.0 2.0 2.0 2.02.0 12.0 4.0 2.0 2.0 2.02.0 12.0 4.0 2.0 2.0 2.03.0 20.0 5.0 2.0 5.0 5.03.0 - 5.0 - 5.0 -3.0 40.0 6.0 3.0 15.0 10.04.0 60.0 6.0 3.0 15.0 10.0n 4.5 100.0 20.0 5.0 30.0 25.0n 4.5 100.0 20.0 5.0 30.0 25.0n 4.5 100.0 20.0 5.0 30.0 25.0n 4.5 80.0 10.0 3.0 20.0 15.04.0 80.0 10.0 3.0 20.0 15.0n 5.0 50.0 15.0 5.0 20.0 15.0n 5.0 50.0 15.0 5.0 20.0 15.0n 7.0 120.0 20.0 5.0 30.0 25.0n 7.0 120.0 20.0 5.0 30.0 25.0n 7.0 120.0 20.0 5.0 30.0 25.0n 9.0 150.0 20.0 5.0 30.0 15.0n 9.0 150.0 20.0 5.0 30.0 25.0n 9.0 150.0 20.0 5.0 30.0 25.0n 8.0 60.0 15.0 5.0 25.0 15.0n 8.0 60.0 15.0 5.0 25.0 15.0n 10.0 180.0 20.0 5.0 40.0 25.0n 10.0 180.0 20.0 5.0 40.0 25.0n 10.0 180.0 20.0 5.0 40.0 25.0n 10.0 200.0 20.0 5.0 40.0 25.0n 11.0 250.0 20.0 5.0 40.0 25.0n 11.0 250.0 20.0 5.0 40.0 25.0n 12.0 300.0 20.0 5.0 40.0 25.021


Technical data: open cable drag chainsMP 10.1Page 37• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• max. cable diameter:10 mm6–41 mm18-58 mm15 mm67 pcoutside flexure curve slitted8 mmMP 14Page 38• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• max. cable diameter:14 mm16-40 mm25-75 mm26 mm38 pcoutside flexure curve12 mmMP 15Page 39• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• max. cable diameter:14 mm16-40 mm25-75 mm26 mm38 pcNon-opening12 mmMP 18.1Page 40• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• max. cable diameter:18 mm15-70 mm28-78 mm33 mm30 pcoutside flexure curve15 mmMP 18.2Page 41• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• max. cable diameter:18 mm15-70 mm28-78 mm33 mm30 pcinside flexure curve15 mm22


• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, unsupported• Acceleration, unsupported10 msee diagram2 m1 mnot recommended2 m/s4 m/s2 m/s²2 m/s²12 msee diagram3 m2 mnot recommended2 m/s4 m/s2 m/s²2 m/s²12 msee diagram3 m2 mnot recommended2 m/s4 m/s2 m/s²2 m/s²20 msee diagram8 m3 m0.5 m2 m/s5 m/s5 m/s²5 m/s²not recommendedsee diagram8 m3 m0.5 m5 m/s5 m/s²23


Technical data: open cable drag chainsMP 3000Page 42• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:26 mm26-125 mm50-300 mm45 mm22 pcinside flexure curve23 mmMP 32Page 43• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:32 mm45-546 mm80-250 mm64.5 mm16 pcinside and outside flexure curve23 mmMP 32.2Page 44• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:32 mm45-546 mm80-250 mm64.5 mm16 pcinside and outside flexure curve28 mmMP 35Page 45• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:34 mm62-150 mm70-300 mm58 mm17 pcinside flexure curve30 mmMP 44Page 46• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:40 mm45-182 mm90-250 mm75.5 mm13 pcinside and outside flexure curve35 mm24


• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported60 msee diagram40 m3 m0.7 m3 m/s6 m/s10 m/s²15 m/s²100 msee diagram60 m5 m2 m5 m/s20 m/s25 m/s²30 m/s²100 msee diagram60 m5 m1 m5 m/s20 m/s25 m/s²30 m/s²80 msee diagram40 m3 m1 m3 m/s10 m/s15 m/s²20 m/s²50 msee diagram40 m3 m1 m5 m/s15 m/s15 m/s²20 m/s²25


Technical data: open cable drag chainsMP 41Page 47• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:42 mm45-546 mm90-300 mm77 mm13 pcinside and outside flexure curve36 mmMP 41.2Page 48• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:42 mm45-546 mm90-300 mm77 mm13 pcinside and outside flexure curve36 mmMP 52.1Page 49• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:52 mm45-546 mm100-350 mm91 mm11 pcinside and outside flexure curve45 mmMP 52.2Page 50• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:52 mm45-546 mm100-350 mm91 mm11 pcinside and outside flexure curve45 mmMP 66Page 51• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:60 mm45-182 mm150-350 mm91.5 mm11 pcinside and outside flexure curve52 mm26


• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported120 msee diagram100 m6 m2 m5 m/s20 m/s25 m/s²30 m/s²120 msee diagram100 m6 m1 m5 m/s20 m/s25 m/s²30 m/s²150 msee diagram100 m6 m3 m5 m/s20 m/s25 m/s²30 m/s²150 msee diagram100 m6 m2 m5 m/s20 m/s25 m/s²30 m/s²80 msee diagram50 m5 m2 m5 m/s15 m/s15 m/s²25 m/s²27


Technical data: open cable drag chainsMP 62.1Page 52• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:62 mm118-518 mm150-500 mm100 mm10 pcinside and outside flexure curve52 mmMP 62.2Page 53• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:62 mm118-518 mm150-500 mm100 mm10 pcinside and outside flexure curve52 mmMP 72Page 54• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:72 mm118-518 mm150-500 mm100 mm10 pcinside and outside flexure curve60 mmMP 82.2Page 55• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:82 mm118-518 mm150-500 mm118 mm9 pcinside and outside flexure curve65 mmMP 102.2Page 56• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:104 mm118-518 mm250-500 mm141 mm7 pcinside and outside flexure curve83 mm28


• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported150 msee diagram120 m6 m4 m5 m/s20 m/s25 m/s²40 m/s²150 msee diagram120 m6 m4 m5 m/s20 m/s25 m/s²40 m/s²150 msee diagram120 m6 m6 m5 m/s20 m/s25 m/s²40 m/s²150 msee diagram120 m6 m3 m5 m/s20 m/s25 m/s²40 m/s²150 msee diagram150 m8 m8 m5 m/s20 m/s25 m/s²40 m/s²29


Technical data: closed cable drag chainsMP 25 GPage 57• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:25 mm26-125 mm60-250 mm30 mm33 pcoutside flexure curve22 mmMP 32.3 GPage 58• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:32 mm45-396 mm120-250 mm64.5 mm16 pcinside and outside flexure curve28 mmMP 36 GPage 59• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:36 mm62-125 mm80-200 mm40 mm25 pcinside flexure curve32 mmMP 43 GPage 60• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:38 mm62-182 mm125-250 mm75.5 mm13 pcinside and outside flexure curve35 mmMP 41.3 GPage 61• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:42 mm45-396 mm150-300 mm77.0 mm13 pcinside and outside flexure curve36 mm30


• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported40 msee diagram25 m3 m1 m3 m6 m/s10 m/s²15 m/s²100 msee diagram60 m5 m1 m5 m/s20 m/s25 m/s²30 m/s²60 msee diagram30 m3 m1 m3 m/s10 m/s15 m/s²20 m/s²50 msee diagram40 m3 m1 m5 m/s15 m/s15 m/s²20 m/s²120 msee diagram100 m6 m1 m5 m/s20 m/s25 m/s²30 m/s²31


Technical data: closed cable drag chainsMP 52.3 GPage 62• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:52 mm45-396 mm150-350 mm91.0 mm11 pcinside and outside flexure curve45 mmMP 65 GPage 63• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:60 mm84-144 mm200-350 mm91.5 mm11 pcinside and outside flexure curve52 mmMP 62.3 GPage 64• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:62 mm118-418 mm200-500 mm100.0 mm10 pcinside and outside flexure curve52 mmMP 82.3 GPage 65• Interior height:• Interior widths:• Radii:• Pitch:• Links per meter:• Loading side:• Existing shelving system• max. cable diameter:82 mm118-418 mm200-500 mm118.0 mm9 pcinside and outside flexure curve65 mm32


• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported• Travel distance, gliding:• Travel distance, self supporting:• Travel distance, vertical, hanging:• Travel distance, vertical, upright:• Rotated 90º, unsupported:• Speed, gliding• Speed, unsupported• Acceleration, gliding• Acceleration, unsupported150 msee diagram100 m6 m3 m5 m/s20 m/s25 m/s²30 m/s²60 msee diagram50 m5 m2 m5 m/s15 m/s15 m/s²25 m/s²150 msee diagram120 m6 m2 m5 m/s20 m/s25 m/s²40 m/s²150 msee diagram120 m6 m3 m5 m/s20 m/s25 m/s²40 m/s²33


34Information about ESD cable drag chains


Murrplastik SystemtechnikGmbH has incorporated cabledrag chain systems for use inpotentially explosive locationsin its delivery programme. Allcable drag chains and accessoriesof the standard deliveryprogramme may be deliveredas a special range of productsproviding explosiveprotection.Made from a special material,these cable drag chains donot accumulate charge andalso have a very high derivationability for electrostaticcharges; as such they notonly meet, but largely exceed,the requirements of ATEX94/9/EC. From June 2003, allcomponents and machinesused in potentially explosiveareas must be approvedunder the ATEX directive.Murrplastik cable drag chainsare certified as applianceswhich provide significantadvantages for the user.In and of themselves, ourproducts are approved componentsconforming to ATEX94/9/EC, thus obviating theneed for acceptance of theentire machine.Additional informationalmaterials• ATEX Operating Manual• Info brochure ESD chains• Usage guidelinesPlease request35


MP 10.1 - EasyLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)1 UL94/V0 (PA/oxide red)7 ESD (PA/light grey)9 Custom versionSample order:0101 006 018 0000Internal width = 6 mmRadius = 18 mmRidge version = 0Version = 0Ideal operating conditions:• EASY mechanism for simple filling• Quiet operation• Unsupported arrangement• Gliding arrangementAlternative chain type:• MP 14/MP 15 Greater selfsupporting lengths• MP 14/MP 15 Higher level ofstiffness and torsional strengthMP 10.1 006MP 10.1 009MP 10.1 015MP 10.1 021MP 10.1 031MP 10.1 04113162228384869152131410060090150210310411828384858018028038048058 00179Order-Number:010100Installation dimensions (in mm)Radius R 18 28 38 48 58Outside height of chain link (H G) 14 14 14 14 14Height of bend (H) 50 70 90 110 130Height of moving end connection (H MA) 36 56 76 96 116Safety margin (S) 10 10 10 10 10Installation height (H S) 60 80 100 120 140Arc projection (M L) 40 50 60 70 80Bend length (L B) 94 125 156 188 21937


MP 14 - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)9 Custom versionSample order:0140 016 025 0000Internal width = 16 mmRadius = 25 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in outside bend• Quiet operation• Unsupported arrangement• Gliding arrangementAlternative chain type:• MP 15 Higher level of stiffness andtorsional strength• MP 18. opening cover in insidebend• MP 18.1/MP 18.2 Great selfsupporting lengthsMP14 016MP14 020MP14 030MP14 040242838481620304001602003004025384875025038048075 009Order-Number:014000Installation dimensions (in mm)Radius R 25 38 48 75Outside height of chain link (H G) 19 19 19 19Height of bend (H) 69 95 115 169Height of moving end connection (H MA) 50 76 96 150Safety margin (S) 20 20 20 20Installation height (H S) 89 115 135 189Arc projection (M L) 60 74 84 110Bend length (L B) 134 175 207 29138


MP 15 - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)1 UL94/V0 (PA/oxide red)7 ESD (PA/light grey)9 Custom versionSample order:0150 016 025 0000Internal width = 16 mmRadius = 25 mmRidge version = 0Version = 0Ideal operating conditions:• Closed structure gives high degreeof stiffness and torsional strength• Quiet operation• Compact dimensions with highstability• Unsupported arrangement• Gliding arrangementAlternative chain type:• MP 14 Cover variant for opening• MP 18.1/MP 18.2 Great selfsupporting lengthsMP15 016MP15 020MP15 030MP15 040242838481620304001602003004025384875025038048075 00179Order-Number:015000Installation dimensions (in mm)Radius R 25 38 48 75Outside height of chain link (H G) 19 19 19 19Height of bend (H) 69 95 115 169Height of moving end connection (H MA) 50 76 96 150Safety margin (S) 20 20 20 20Installation height (H S) 89 115 135 189Arc projection (M L) 60 74 84 110Bend length (L B) 134 175 207 29139


MP 18.1 - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)1 UL94/V0 (PA/oxide red)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0181 015 028 0000Internal width = 15 mmRadius = 28 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in outside bend• Quiet operation• High stability• Flexible internal separation• Gliding arrangement• Unsupported arrangement• Rotated 90°, unsupportedAlternative chain type:MP18.1 015MP18.1 018MP18.1 025MP18.1 037MP18.1 050MP18.1 07028313850638315182537507001501802503705007028384878028038048078 001579• MP 18. opening cover in insidebend• MP 3000 greater unsupportedlengthsOrder-Number:018100Installation dimensions (in mm)Radius R 28 38 48 78Outside height of chain link (H G) 23 23 23 23Height of bend (H) 79 99 119 179Height of moving end connection (H MA) 56 76 96 156Safety margin (S) 30 30 30 30Installation height (H S) 109 129 149 209Arc projection (M L) 72 82 92 122Bend length (L B) 157 188 220 31440


MP 18.2 - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)1 UL94/V0 (PA/oxide red)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0182 015 028 0000Internal width = 15 mmRadius = 28 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in inside bend• Quiet operation• High stability• Flexible internal separation• Unsupported arrangement• Rotated 90°, unsupportedAlternative chain type:MP18.2 015MP18.2 018MP18.2 025MP18.2 037MP18.2 050MP18.2 07028313850638315182537507001501802503705007028384878028038048078 001579• MP 18.1 Opening cover on outsideof radius• MP 3000 greater unsupportedlengths• MP 18.1 gliding arrangementOrder-Number:018200Installation dimensions (in mm)Radius R 28 38 48 78Outside height of chain link (H G) 23 23 23 23Height of bend (H) 79 99 119 179Height of moving end connection (H MA) 56 76 96 156Safety margin (S) 30 30 30 30Installation height (H S) 109 129 149 209Arc projection (M L) 72 82 92 122Bend length (L B) 157 188 220 31441


MP 3000 - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without biasVersion:0 Standard (PA/black)1 UL94/V0 (PA/oxide red)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0300 026 050 0000Internal width = 26 mmRadius = 50 mmRidge version = 0Version = 0Ideal operating conditions:MP3001MP3002MP3002.5MP3003MP3003.5MP3004MP3005MP3006Order-Number:44557480941051191430300263756627687101125026037056062076087101125507095120150200300050070095120150200300001015790• Compact dimensions withopening cover in inside bend• Quiet operation• High stability• Flexible internal separation• Rotated 90°, unsupported• Version with bias (RV) for greaterself supporting length• Version with bias (RV) for glidingarrangementAlternative chain type:• MP 25 G closed series• MP 32 can be opened on bothsides• MP 32 variable widths• MP 32 greater stresses• MP 32 flange connection (KA-F)• MP 32 Back radiiInstallation dimensions (in mm)Radius R 50 70 95 120 150 200 300Outside height of chain link (H G) 35 35 35 35 35 35 35Height of bend (H) 135 175 225 275 335 435 635Height of moving end connection (H MA) 100 140 190 240 300 400 600Safety margin with bias (S V) 45 45 45 45 45 45 45Installation height with bias (H SV) 180 220 270 320 380 480 680Safety margin without bias (S K) 10 10 10 10 10 10 10Installation height without bias (H SK) 145 185 235 285 345 445 645Arc projection (M L) 112 132 158 182 212 262 362Bend length (L B) 257 320 398 477 571 728 104242


MP 32 - PowerLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionInternal width (order code)in mmOutside widthin mmMP32 045MP32 062MP32 071MP32 084MP32 096MP32 107MP32 121MP32 133MP32 144MP32 146MP32 158MP32 171MP32 182MP32 196MP32 220MP32 246MP32 296MP32 346MP32 396MP32 446MP32 496MP32 546MP32 xxx718897110122133147159170172184197208222246272322372422472522572inside+ 264562718496107121133144146158171182196220246296346396446496546>80–600045062071084096107121133144146158171182196220246296346396446496546Alu8010012015020025008010012015020025002*46909Version:0 Standard (PA/black)9 Custom versionSample order:0320 045 080 0000Internal width = 45 mmRadius = 80 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontalAlternative chain type:• MP 36 G closed series• MP 18. opening cover in insidebend• MP 35 easier to useOrder-Number:032000Installation dimensions (in mm)Radius R 80 100 120 150 200 250Outside height of chain link (H G) 53 53 53 53 53 53Height of bend (H) 233 273 313 373 473 573Height of moving end connection (H MA) 180 220 260 320 420 520Safety margin (S) 30 30 30 30 30 30Installation height (H S) 263 303 343 403 503 603Arc projection (M L) 181 201 221 251 301 351Bend length (L B) 430 493 556 650 807 96443


MP 32.2 - PowerLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionVersion:0 Standard (PA/black)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionMP 32.2 045MP 32.2 062MP 32.2 071MP 32.2 084MP 32.2 096MP 32.2 107MP 32.2 121MP 32.2 133MP 32.2 144MP 32.2 146MP 32.2 158MP 32.2 171MP 32.2 182MP 32.2 196MP 32.2 220MP 32.2 246MP 32.2 296MP 32.2 346MP 32.2 396MP 32.2 446MP 32.2 496MP 32.2 546MP 32.2 xxx718897110122133147159170172184197208222246272322372422472522572inside+ 264562718496107121133144146158171182196220246296346396446496546>45–600045062071084096107121133144146158171182196220246296346396446496546Alu8010012015020025008010012015020025002*4690579Sample order:0322 045 080 0000Internal width = 45 mmRadius = 80 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Very high additional loads• Both sides must be opened• Long travel distances• Extreme self supporting lengthsAlternative chain type:• MP 32.3 closed series• MP 35 for easy applications, openstoward inner bend• MP 32 greater unsupportedlengthsOrder-Number:032200Installation dimensions (in mm)Radius R 80 100 120 150 200 250Outside height of chain link (H G) 53 53 53 53 53 53Height of bend (H) 233 273 313 373 473 573Height of moving end connection (H MA) 180 220 260 320 420 520Safety margin (S) 30 30 30 30 30 30Installation height (H S) 263 303 343 403 503 603Arc projection (M L) 181 201 221 251 301 351Bend length (L B) 430 493 556 650 807 96444


MP 35 - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without biasVersion:0 Standard (PA/black)9 Custom versionSample order:0350 062 070 0000Internal width = 62 mmRadius = 70 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with• opening cover in inside bend• Quiet operation• High stability• Flexible internal separation• Rotated 90°, unsupported• Version with bias (RV) for greaterself supporting length• Version with bias (RV) for glidingarrangementAlternative chain type:MP35 062MP35 086MP35 102MP35 125MP35 150821061221451706286102125150062086102125150701001502003000701001502003000109• MP 36 G closed series• MP 32 can be opened on bothsides• MP 32 variable widths• MP 32 greater stresses• MP 32 flange connection (KA-F)• MP 32 Back radiiOrder-Number:035000Installation dimensions (in mm)Radius R 70 100 150 200 300Outside height of chain link (H G) 48 48 48 48 48Height of bend (H) 188 248 348 448 648Height of moving end connection (H MA) 140 200 300 400 600Safety margin with bias (S V) 40 40 40 40 40Installation height with bias (H SV) 228 288 388 488 688Safety margin without bias (S K) 15 15 15 15 15Installation height without bias (H SK) 203 263 363 463 663Arc projection (M L) 152 182 232 282 382Bend length (L B) 353 447 604 761 107545


MP 44 - MultiLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0* PA full-ridged with bias1* PA full-ridged without bias2 PA half-ridged with bias3 PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0440 045 090 0000Internal width = 45 mmRadius = 90 mmRidge version = 0Version = 0Ideal operating conditions:MP44 045MP44 062MP44 084MP44 105MP44 144MP44 182MP44 xxx7895117138177215inside+ 33456284105144182>118-600045062084105144182Alu901251502002500901251502002500*1*234567909• Opening cover in inside/outsidebend• Flexible internal separation• Aluminium frame bridge in variablelengths• Gliding arrangement• Unsupported arrangement• Quiet operationAlternative chain type:• MP 43 G closed series• MP 41 greater stresses• MP 41 flange connection (KA-F)• MP 41 Back radiiOrder-Number:044000Installation dimensions (in mm)Radius R 90 125 150 200 250Outside height of chain link (H G) 60 60 60 60 60Height of bend (H) 240 310 360 460 560Height of moving end connection (H MA) 180 250 300 400 500Safety margin with bias (S V) 38 38 38 38 38Installation height with bias (H SV) 278 348 398 498 598Safety margin without bias (S K) 13 13 13 13 13Installation height without bias (H SK) 253 323 373 473 573Arc projection (M L) 196 230 256 306 356Bend length (L B) 452 562 641 798 95546


MP 41 - PowerLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionInternal width (order code)in mmOutside widthin mmMP41 045MP41 062MP41 071MP41 084MP41 096MP41 107MP41 121MP41 133MP41 144MP41 146MP41 158MP41 171MP41 182MP41 196MP41 220MP41 246MP41 296MP41 346MP41 396MP41 446MP41 496MP41 546MP41 xxx7794103116128139153167176178192203214228252278328378428478528578inside+ 324562718496107121133144146158171182196220246296346396446496546>80–600045062071084096107121133144146158171182196220246296346396446496546Alu9012015020025030009012015020025030002*46909Version:0 Standard (PA/black)9 Custom versionSample order:0410 045 090 0000Internal width = 45 mmRadius = 90 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontalAlternative chain type:• MP 44 version with/without bias• MP 41.2 simpler assemblyOrder-Number:041000Installation dimensions (in mm)Radius R 90 120 150 200 250 300Outside height of chain link (H G) 62 62 62 62 62 62Height of bend (H) 252 312 372 472 572 672Height of moving end connection (H MA) 190 250 310 410 510 610Safety margin (S) 30 30 30 30 30 30Installation height (H S) 282 342 402 502 602 702Arc projection (M L) 203 233 263 313 363 413Bend length (L B) 473 567 661 818 975 113247


MP 41.2 - PowerLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmMP41.2 045MP41.2 062MP41.2 071MP41.2 084MP41.2 096MP41.2 107MP41.2 121MP41.2 133MP41.2 144MP41.2 146MP41.2 158MP41.2 171MP41.2 182MP41.2 196MP41.2 220MP41.2 246MP41.2 296MP41.2 346MP41.2 396MP41.2 446MP41.2 496MP41.2 546MP41.2 xxx7794103116128139153167176178192203214228252278328378428478528578inside+ 32The radii can be combinedwith any internal width4562718496107121133144146158171182196220246296346396446496546>80–600045062071084096107121133144146158171182196220246296346396446496546Alu90120150200250300090120150200250300012*3*456790579Ridge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0412 045 090 0000Internal width = 45 mmRadius = 90 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separationAlternative chain type:• MP 44 version with/without bias• MP 41 greater unsupported lengthOrder-Number:041200Installation dimensions (in mm)Radius R 90 120 150 200 250 300Outside height of chain link (H G) 62 62 62 62 62 62Height of bend (H) 252 312 372 472 572 672Height of moving end connection (H MA) 190 250 310 410 510 610Safety margin with bias (S V) 30 30 30 30 30 30Installation height with bias (H SV) 282 342 402 502 602 702Safety margin without bias (S K) 15 15 15 15 15 15Installation height without bias (H SK) 267 327 387 487 587 687Arc projection (M L) 203 233 263 313 363 413Bend length (L B) 473 567 661 818 975 113248


MP 52.1 - PowerLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionMP52.1 045MP52.1 062MP52.1 071MP52.1 084MP52.1 096MP52.1 107MP52.1 121MP52.1 133MP52.1 144MP52.1 146MP52.1 158MP52.1 171MP52.1 182MP52.1 196MP52.1 246MP52.1 296MP52.1 346MP52.1 396MP52.1 446MP52.1 496MP52.1 546MP52.1 xxxOrder-Number:7794103116128139153169176178194203214228278328378428478528578inside+ 3205214562718496107121133144146158171182196246296346396446496546>80–600045062071084096107121133144146158171182196246296346396446496546Alu1001502002503003501001502002503003500012*3*45679090Sample order:0521 045 100 0000Internal width = 45 mmRadius = 100 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontal• Version with/without biasAlternative chain type:• MP 65 G closed series• MP 66 easier to use• MP 52.2 simpler assemblyInstallation dimensions (in mm)Radius R 100 150 200 250 300 350Outside height of chain link (H G) 74 74 74 74 74 74Height of bend (H) 304 404 504 604 704 804Height of moving end connection (H MA) 230 330 430 530 630 730Safety margin with bias (S V) 46 46 46 46 46 46Installation height with bias (H SV) 350 450 550 650 750 850Safety margin without bias (S K) 16 16 16 16 16 16Installation height without bias (H SK) 320 420 520 620 720 820Arc projection (M L) 243 293 343 393 443 493Bend length (L B) 568 725 882 1039 1196 135349


MP 52.2 - PowerLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmMP52.2 045MP52.2 062MP52.2 071MP52.2 084MP52.2 096MP52.2 107MP52.2 121MP52.2 133MP52.2 144MP52.2 146MP52.2 158MP52.2 171MP52.2 182MP52.2 196MP52.2 220MP52.2 246MP52.2 296MP52.2 346MP52.2 396MP52.2 446MP52.2 496MP52.2 546MP52.2 999Order-Number:7794103116128139153165176178190203214228252278328378428478528578inside+ 32The radii can be combinedwith any internal width05224562718496107121133144146158171182196220246296346396446496546>80–600045062071084096107121133144146158171182196220246296346396446496546Alu1001501752002503003501001501752002503003500012*3*4567905790Ridge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0522 045 100 0000Internal width = 45 mmRadius = 100 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Version with/without biasAlternative chain type:• MP 65 G closed series• MP 66 easier to use• MP 52.1 greater unsupportedlengthInstallation dimensions (in mm)Radius R 100 150 175 200 250 300 350Outside height of chain link (H G) 74 74 74 74 74 74 74Height of bend (H) 304 404 454 504 604 704 804Height of moving end connection (H MA) 230 330 380 430 530 630 730Safety margin with bias (S V) 46 46 46 46 46 46 46Installation height with bias (H SV) 350 450 500 550 650 750 850Safety margin without bias (S K) 16 16 16 16 16 16 16Installation height without bias (H SK) 320 420 470 520 620 720 820Arc projection (M L) 243 293 318 343 393 443 493Bend length (L B) 568 725 804 882 1039 1196 135350


MP 66 - MultiLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0* PA full-ridged with bias1* PA full-ridged without bias2 PA half-ridged with bias3 PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0660 045 150 0000Internal width = 45 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:MP66 045MP66 062MP66 084MP66 105MP66 144MP66 182MP66 xxx7996118139178216inside+ 34456284105144182>45–600045062084105144182Alu1502002402803501502002402803500*1*234567909• Opening cover in inside/outsidebend• Flexible internal separation• Aluminium frame bridge in variablelengths• Gliding arrangement• Unsupported arrangement• Quiet operationAlternative chain type:• MP 65 G closed series• MP 62.1/MP 62.2 greater stresses• MP 62.1/MP 62.2 flangeconnection (KA-F)Order-Number:066000Installation dimensions (in mm)Radius R 150 200 240 280 350Outside height of chain link (H G) 80 80 80 80 80Height of bend (H) 380 480 560 640 780Height of moving end connection (H MA) 300 400 480 560 700Safety margin with bias (S V) 50 50 50 50 50Installation height with bias (H SV) 430 530 610 690 830Safety margin without bias (S K) 15 15 15 15 15Installation height without bias (H SK) 395 495 575 655 795Arc projection (M L) 282 332 372 412 482Bend length (L B) 688 845 971 1096 131651


MP 62.1 - HeavyLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0620 118 150 0000MP 62.1 118MP 62.1 143MP 62.1 168MP 62.1 193MP 62.1 218MP 62.1 243MP 62.1 268MP 62.1 293MP 62.1 318MP 62.1 343MP 62.1 368MP 62.1 418MP 62.1 468MP 62.1 518MP 62.1 xxxOrder-Number:150175200225250275300325350375400450500550inside+ 320620118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu1502002503004005001502002503004005000012*3*45679090Internal width = 118 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontal• Version with/without biasAlternative chain type:• MP 65 G closed series• MP 66 easier to use• MP 62.2 simpler assemblyInstallation dimensions (in mm)Radius R 150 200 250 300 400 500Outside height of chain link (H G) 94 94 94 94 94 94Height of bend (H) 424 524 624 724 924 1124Height of moving end connection (H MA) 330 430 530 630 830 1030Safety margin with bias (S V) 50 50 50 50 50 50Installation height with bias (H SV) 474 574 674 774 974 1174Safety margin without bias (S K) 20 20 20 20 20 20Installation height without bias (H SK) 444 544 644 744 944 1144Arc projection (M L) 312 362 412 462 562 662Bend length (L B) 766 923 1080 1237 1551 186552


MP 62.2 - HeavyLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0622 118 150 0000MP 62.2 118MP 62.2 143MP 62.2 168MP 62.2 193MP 62.2 218MP 62.2 243MP 62.2 268MP 62.2 293MP 62.2 318MP 62.2 343MP 62.2 368MP 62.2 418MP 62.2 468MP 62.2 518MP 62.2 xxxOrder-Number:150175200225250275300325350375400450500550inside+ 320622118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu1502002503003504005001502002503003504005000012*3*4567905790Internal width = 118 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Version with/without biasAlternative chain type:• MP 65 G closed series• MP 66 easier to use• MP 62.1 greater unsupportedlengthInstallation dimensions (in mm)Radius R 150 200 250 300 350 400 500Outside height of chain link (H G) 94 94 94 94 94 94 94Height of bend (H) 424 524 624 724 824 924 1124Height of moving end connection (H MA) 330 430 530 630 730 830 1030Safety margin with bias (S V) 50 50 50 50 50 50 50Installation height with bias (H SV) 474 574 674 774 874 974 1174Safety margin without bias (S K) 20 20 20 20 20 20 20Installation height without bias (H SK) 444 544 644 744 844 944 1144Arc projection (M L) 312 362 412 462 512 562 662Bend length (L B) 766 923 1080 1237 1394 1551 186553


MP 72 - HeavyLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0720 118 150 0000Internal width = 118 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:MP 72 118MP 72 143MP 72 168MP 72 193MP 72 218MP 72 243MP 72 268MP 72 293MP 72 318MP 72 343MP 72 368MP 72 418MP 72 468MP 72 518MP 72 xxx150175200225250275300325350375400450500550inside+ 32118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu15020025030040050015020025030040050002*46909• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontal• Version with/without biasAlternative chain type:• MP 62.2/MP 82.2simpler assemblyOrder-Number:072000Installation dimensions (in mm)Radius R 150 200 250 300 400 500Outside height of chain link (H G) 102 102 102 102 102 102Height of bend (H) 422 522 622 722 922 1122Height of moving end connection (H MA) 320 420 520 620 820 1020Safety margin (S) 20 20 20 20 20 20Installation height (H S) 442 542 642 742 942 1142Arc projection (M L) 311 361 411 461 561 661Bend length (L B) 763 920 1077 1234 1548 186254


MP 82.2 - PowerLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0822 118 150 0000MP 82.2 118MP 82.2 143MP 82.2 168MP 82.2 193MP 82.2 218MP 82.2 243MP 82.2 268MP 82.2 293MP 82.2 318MP 82.2 343MP 82.2 368MP 82.2 418MP 82.2 468MP 82.2 518MP 82.2 xxx163188213238263288313338363388413463513563inside+ 45118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu150200250300350400500650150200250300350400500650012*3*456790579Internal width = 118 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Version with/without biasOrder-Number:082200Installation dimensions (in mm)Radius R 150 200 250 300 350 400 500 650Outside height of chain link (H G) 112 112 112 112 112 112 112 112Height of bend (H) 422 522 622 722 822 922 1122 1422Height of moving end connection (H MA) 310 410 510 610 710 810 1010 1310Safety margin with bias (S V) 50 50 50 50 50 50 50 50Installation height with bias (H SV) 472 572 672 772 872 972 1172 1472Safety margin without bias (S K) 30 30 30 30 30 30 30 30Installation height without bias (H SK) 452 552 652 752 852 952 1152 1452Arc projection (M L) 329 379 429 479 529 579 679 829Bend length (L B) 781 938 1095 1252 1409 1566 1880 235155


MP 102.2 - HeavyLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:1022 118 250 0000Internal width = 118 mmRadius = 250 mmRidge version = 0Version = 0Ideal operating conditions:MP102.2 118MP102.2 143MP102.2 168MP102.2 192MP102.2 218MP102.2 243MP102.2 268MP102.2 293MP102.2 318MP102.2 343MP102.2 368MP102.2 418MP102.2 468MP102.2 518MP102.2 xxx164189214239264289314339364389414464514564inside+ 46118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu25030040050025030040050002*46909• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontal• version with bias (RV) for greaterself supporting length• Version with bias (RV) for glidingarrangementOrder-Number:102200Installation dimensions (in mm)Radius R 250 300 400 500Outside height of chain link (H G) 135 135 135 135Height of bend (H) 655 755 955 1155Height of moving end connection (H MA) 520 620 820 1020Safety margin (S) 50 50 50 50Installation height (H S) 705 805 1005 1205Arc projection (M L) 468 518 618 718Bend length (L B) 1169 1326 1640 195456


MP 25 G - SafeLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)7 ESD (PA/light grey)9 Custom versionSample order:0250 026 060 0000Internal width = 26 mmRadius = 60 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in outside bend• Quiet operation• High stability• Flexible internal separationAlternative chain type:• MP 3000/MP 26 open version• MP 36 G Flange connectionMP25 026MP25 037MP25 062MP25 087MP25 101MP25 125425378103117141263762871011250260370620871011256075100125150200250060075100125150200250 0079Order-Number:025000Installation dimensions (in mm)Radius R 60 75 100 125 150 200 250Outside height of chain link (H G) 37 37 37 37 37 37 37Height of bend (H) 157 187 237 287 337 437 537Height of moving end connection (H MA) 120 150 200 250 300 400 500Safety margin (S) 33 33 33 33 33 33 33Installation height (H S) 190 220 270 320 370 470 570Arc projection (M L) 108 124 148 174 198 248 298Bend length (L B) 276 324 402 481 559 716 87357


MP 32.3 G - ClosedLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:4 Alu full-ridged with biasVersion:0 Standard (PA/black)9 Custom versionSample order:0323 071 120 0400Internal width = 71 mmRadius = 120 mmRidge version = 4Version = 0Ideal operating conditions:MP32.3G 071MP32.3G 084MP32.3G 096MP32.3G 107MP32.3G 121MP32.3G 133MP32.3G 144MP32.3G 146MP32.3G 158MP32.3G 171MP32.3G 182MP32.3G 196MP32.3G 220MP32.3G 246MP32.3G 296MP32.3G 346MP32.3G xxx97110122133147159170172184197208222246272322372inside+ 26718496107121133144146158171182196220246296346>96–600071084096107121133144146158171182196220246296346Alu120150200250120150200250 409• Extremely high accelerations• Extremely high speeds• Very high additional loads• Long travel distances• Extreme self supporting lengthsAlternative chain type:• MP 32.2 open series• MP 36G for easier applications,opens toward inner bendOrder-Number:032300Installation dimensions (in mm)Radius R 120 150 200 250Outside height of chain link (H G) 53 53 53 53Height of bend (H) 313 373 473 573Height of moving end connection (H MA) 260 320 420 520Safety margin (S) 30 30 30 30Installation height (H S) 343 403 503 603Arc projection (M L) 221 251 301 351Bend length (L B) 556 650 807 96458


MP 36 G - SafeLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with biasVersion:0 Standard (PA/black)9 Custom versionSample order:0360 062 080 0000Internal width = 62 mmRadius = 80 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in inside bend• Quiet operation• High stability• Flexible internal separationAlternative chain type:• MP 35 open versionMP36 062MP36 086MP36 102MP36 12578102118141628610212506208610212580100125150200080100125150200 009Order-Number:036000Installation dimensions (in mm)Radius R 80 100 125 150 200Outside height of chain link (H G) 48 48 48 48 48Height of bend (H) 208 248 298 348 448Height of moving end connection (H MA) 160 200 250 300 400Safety margin (S) 32 32 32 32 32Installation height (H S) 240 280 330 380 480Arc projection (M L) 144 164 189 214 264Bend length (L B) 367 429 508 586 74359


MP 43 G - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0430 062 125 0000Internal width = 62 mmRadius = 125 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in inside/outside bend• Quiet operation• High stability• Flexible internal separationAlternative chain type:• MP 44 open version• MP 36 G/MP 65 G FlangeconnectionMP43 062MP43 084MP43 105MP43 144MP43 18295117138177215628410514418206208410514418212515020025012515020025001909Order-Number:043000Installation dimensions (in mm)Radius R 125 150 200 250Outside height of chain link (H G) 62 62 62 62Height of bend (H) 312 362 462 562Height of moving end connection (H MA) 250 300 400 500Safety margin with bias (S V) 38 38 38 38Installation height with bias (H SV) 350 400 500 600Safety margin without bias (S K) 13 13 13 13Installation height without bias (H SK) 325 375 475 575Arc projection (M L) 232 256 306 356Bend length (L B) 565 644 801 95860


MP 41.3 G - ClosedLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal width# also available with plasticcoverRidge version:0 PA full-ridged with bias1 PA full-ridged without bias4* Alu full-ridged with bias5* Alu full-ridged without biasVersion:0 Standard (PA/black)9 Custom versionSample order:0413 071 150 0000Internal width = 71 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:MP41.3G 071MP41.3G 084MP41.3G 096MP41.3G 107MP41.3G 121MP41.3G 133MP41.3G 144MP41.3G 146MP41.3G 158MP41.3G 171MP41.3G 182MP41.3G 196MP41.3G 220MP41.3G 246MP41.3G 296MP41.3G 346MP41.3G xxx103116128139153165176178190203214228252278328378inside+ 32718496107121133144146158171182196220246296346>96–600071084#096#107121#133144146#158171182196#220246#296#346Alu150200250300150200250300014*5*09• Extremely high accelerations• Extremely high speeds• Very high additional loads• Long travel distances• Extreme self supporting lengthsAlternative chain type:• MP 41.2 open series• MP 43G for easier useNote:• Plastic cover available from 1stQuarter 2008Order-Number:041300Installation dimensions (in mm)Radius R 150 200 250 300Outside height of chain link (H G) 62 62 62 62Height of bend (H) 372 472 572 672Height of moving end connection (H MA) 310 410 510 610Safety margin with bias (S V) 46 46 46 46Installation height with bias (H SV) 418 518 618 718Safety margin without bias (S K) 16 16 16 16Installation height without bias (H SK) 388 488 588 688Arc projection (M L) 263 313 363 413Bend length (L B) 661 818 975 113261


MP 52.3 G - ClosedLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal width# also available with plasticcoverRidge version:0 PA full-ridged with bias1 PA full-ridged without bias4* Alu full-ridged with bias5* Alu full-ridged without biasVersion:0 Standard (PA/black)9 Custom versionSample order:0523 071 150 0000Internal width = 71 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:MP52.3G 071MP52.3G 084MP52.3G 096MP52.3G 107MP52.3G 121MP52.3G 133MP52.3G 144MP52.3G 146MP52.3G 158MP52.3G 171MP52.3G 182MP52.3G 196MP52.3G 220MP52.3G 246MP52.3G 296MP52.3G 346MP52.3G xxx103116128139153165176178190203214228252278328378Inside+32718496107121133144146158171182196220246296346>96–600071084096#107121#133144146#158171182196#220246#296#346#Alu150175200250300350150175200250300350014*5*09• Extremely high accelerations• Extremely high speeds• Very high additional loads• Long travel distances• Extreme self supporting lengthsAlternative chain type:• MP 52.2 open series• MP 65G for easier useOrder-Number:052300Installation dimensions (in mm)Radius R 150 175 200 250 300 350Outside height of chain link (H G) 75 75 75 75 75 75Height of bend (H) 405 455 505 605 705 805Height of moving end connection (H MA) 330 380 430 530 630 730Safety margin with bias (S V) 50 50 50 50 50 50Installation height with bias (H SV) 455 505 555 655 755 855Safety margin without bias (S K) 20 20 20 20 20 20Installation height without bias (H SK) 425 475 525 625 725 825Arc projection (M L) 294 318 344 394 444 494Bend length (L B) 727 805 884 1041 1198 135562


MP 65 G - MultiLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0650 084 200 0000Internal width = 84 mmRadius = 200 mmRidge version = 0Version = 0Ideal operating conditions:• Compact dimensions with openingcover in inside/outside bend• Quiet operation• High stability• Flexible internal separationAlternative chain type:• MP 66 open versionMP65 084MP65 105MP65 1441181391788410514408410514420024028035020024028035001909Order-Number:065000Installation dimensions (in mm)Radius R 200 240 280 350Outside height of chain link (H G) 80 80 80 80Height of bend (H) 480 560 640 780Height of moving end connection (H MA) 400 480 560 700Safety margin with bias (S V) 50 50 50 50Installation height with bias (H SV) 530 610 690 830Safety margin without bias (S K) 15 15 15 15Installation height without bias (H SK) 495 575 655 795Arc projection (M L) 332 372 412 482Bend length (L B) 845 971 1096 131663


MP 62.3 G - ClosedLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal width# also available with plasticcoverRidge version:0 PA full-ridged with bias1 PA full-ridged without bias4* Alu full-ridged with bias5* Alu full-ridged without biasVersion:0 Standard (PA/black)9 Custom versionSample order:0623 118# 200 0000Internal width = 118 mmRadius = 200 mmRidge version = 0Version = 0Ideal operating conditions:MP62.3G 118MP62.3G 143MP62.3G 168MP62.3G 193MP62.3G 218MP62.3G 243MP62.3G 268MP62.3G 293MP62.3G 318MP62.3G 343MP62.3G 368MP62.3G 418MP62.3G xxx150175200225250275300325350375400450inside+ 32118 118#143 143#168 168193 193#218 218243 243#268 268293 293#318 318343 343#368 368418 418#>118- Alu600200250300350400500200250300350400500014*5*09• Extremely high accelerations• Extremely high speeds• Very high additional loads• Long travel distances• Extreme self supporting lengthsAlternative chain type:• MP 62.2 open series• MP 65G for easier useNote:• Plastic cover available from 1stQuarter 2008Order-Number:062300Installation dimensions (in mm)Radius R 200 250 300 350 400 500Outside height of chain link (H G) 94 94 94 94 94 94Height of bend (H) 524 624 724 824 924 1124Height of moving end connection (H MA) 430 530 630 730 830 1030Safety margin with bias (S V) 50 50 50 50 50 50Installation height with bias (H SV) 574 674 774 874 974 1174Safety margin without bias (S K) 20 20 20 20 20 20Installation height without bias (H SK) 544 644 744 844 944 1144Arc projection (M L) 362 412 462 512 562 662Bend length (L B) 923 1080 1237 1394 1551 186564


MP 82.3 G - ClosedLineOrder variantsPerformance (order code)Ridge version (order code)Radius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:4 Alu full-ridged with bias5 Alu full-ridged without biasVersion:0 Standard (PA/black)9 Custom versionSample order:0823 118 200 0400Internal width = 118 mmRadius = 200 mmRidge version = 4Version = 0Ideal operating conditions:• Extremely high accelerations• Extremely high speeds• Very high additional loads• Long travel distances• Extreme self supporting lengthsMP82.3G 118MP82.3G 143MP82.3G 168MP82.3G 193MP82.3G 218MP82.3G 243MP82.3G 268MP82.3G 293MP82.3G 318MP82.3G 343MP82.3G 368MP82.3G 418MP82.3G xxx163188213238263288313338363388413463inside+ 32118143168193218243268293318343368418>118-600118143168193218243268293318343368418Alu2002503003504005006502002503003504005006504509Order-Number:082300Installation dimensions (in mm)Radius R 200 250 300 350 400 500 650Outside height of chain link (H G) 112 112 112 112 112 112 112Height of bend (H) 522 622 722 822 922 1122 1422Height of moving end connection (H MA) 410 510 610 710 810 1010 1310Safety margin with bias (S V) 50 50 50 50 50 50 50Installation height with bias (H SV) 572 672 772 872 972 1172 1472Safety margin without bias (S K) 30 30 30 30 30 30 30Installation height without bias (H SK) 552 652 752 852 952 1152 1452Arc projection (M L) 379 429 479 529 579 679 829Bend length (L B) 938 1095 1252 1409 1566 1880 235165


VARIABLE GUIDE CHANNEL SYSTEMS67


68We steer you in the right direction!


Guide channel systems forcable drag chains serve astrays for short travel distancesand at the same timeas guides for long traveldistances. If no guide channelis used it is possible thatthe chain links may lay andmove incorrectly. Especiallyfor large bend radii as theside guidance does not exist.In most applications the cables/conduitsenter the chainat a position central to thetravel. This gives the shortestlength of chain. In this casethe chain is about half aslong as the travel distance.If the chain is moved to theleft (see illustration below) itsimply rolls in the channel. Ifit is moved to the right, thenit stacks on top of itself oncethe unsupported length hasbeen exceeded. If the movementis continued to theright, then the glide rail adjuststhe difference in heightand guarantees the minimumpossible friction. This ensuresthe optimum free and correctrunning of the cable dragchain.Section A-A:The cable drag chain glides on itselfSection B-B:The cable drag chain runs on the glide rail69


Simple, quick and secure installation ...... of the Murrplastik guide channel.The combination of the groove system on the individual aluminium channel sides and the glide rail sections formsan extremely variable guide channel system which provides a safe, stable and very attractive chain guide systemrequiring few accessories.The glide rails are simply pushed into the groove provided in the aluminium section. The only fastening requiredis a screw at the beginning and the end of the last glide rail.It is incredibly simple to install the channel. Special clamping pieces are used to secure the system in the desiredposition. The channel sections are perfectly aligned thanks to special plastic longitudinal connectors which areplaced in a groove specially provided for that purpose.There are no welded seams or screw parts jutting out into the chain’s area of movement with the Murrplastikguide channel system.The use of highly durable aluminium obviates the need for any corrosion prevention.Economic solutionThe use of standard components saves cost in this case. Design and manufacture are entirely taken care of.Other methods of producing guide channels involve the following:• Measuring and drawing the installation• Obtaining the various components• Cutting the plate to size• Punching the plate• Plate-edge bending• Drilling the attachment holes• Mounting the channel• Welding and sanding down channel connections• LacqueringWhen the costs of the componentsand assembly time are addedtogether, it soon becomes apparentthat the Murrplastik VAW system isa very cost effective solution.Lowered fixing pointIt is sometimes necessary to lowerthe height of the moving attachmentpoint.In such cases, modifications to thechain layout should be noted (e.g.extension of chain).Please consult with our engineers.70


STRAIN RELIEF SYSTEMS71


72We steer you in the right direction!


The ZL strain relief plate isused to securely hold cableson machines and otherinstallations.The cables are held on eitherside of the plate tonguewith wide bodied type KB 28cable ties.The undercut on the tonguesprevent the cable ties fromslipping off, even when thecable diameter is larger thanthe plate tongue itself. Theuse of the ZL plate, and twowide ties for each cable, isideal.Wide, highly flexible powercable ties increase the surfacepressure and ensurelonger service life. When usinga shelf system, two platesare installed on top of eachother. DH distance bushesare used to this end. Washerscome delivered with thestrain relief plates. However,we do recommend our ELBinsert bushing.This prevents the cold flowingof the plastic. The ZLstrain relief plates should bemounted at a minimum distanceof 20 to 30x the cablediameter from where thecable bends.Durable fastening with metal bushStrain relief plate mounted in chain mountingbracket.73


Strain relief systemsMurrplastik recommendationsThe strain relief plate shouldbe fitted with two power cableties on each side of the cableand secured approx. 20 to 30x cable diameter from the lastmoving chain link.The strain relief is suitable forcables up to 40 mm diameter.All electric cables must berelieved of strain at both themoving and fixed end. Forlonger travel distances (glidingapplication) a strain relief on oneside at the moving end is recommended.Care must be takento ensure the pressure only beapplied to a wide surface of thecable outer jacket.The clamping must be executedin such a way that the individualcores in the cable are notsquashed, but the cable shouldstill be held tightly.Hydraulic and pneumatic conduitsonly have to be strainrelieved at one end.Double strain relief platesStrain relief for the cables entered into the cable drag chain can also be achieved througha doubled setup using spacer sleeves. This variation of strain relief allows for an increasedpacking density.Strain relief plate ZLType Order no. Fits cable drag chain type PackZL...ZL 39 87701014 MP 25037G/MP 44045/MP 66045 1ZL 60 87701016 MP 25062G/MP 35032/MP 36062/MP 43062 1MP 44062 / MP 66062ZL 80 87701015 MP 43082/MP 44082/MP 66082 1ZL 87 87701018 MP 25087G/MP 35086/MP 36086 1ZL 103 87701020 MP 25101G/MP 35102/MP 36102/MP 43107 1MP 44107 / MP 66107ZL 121 87701022 MP 25125G/MP 35125/MP 36125 1ZL 140 87701024 MP 35150/MP 43142/MP 44142/MP 66142 1ZL 180/6 87701026 MP 43182 / MP 44182 1ZL 180/8 87701027 MP 66182 1If the strain relief plate is to be fitted directly on the chain bracket, the holedimensions of the strain relief plate should be taken as the basis.74


Sales agenciesSales agencies/GermanyPostcode areas Murrplastik Systemtechnik GmbH20095 - 32609 Vertriebsgebiet Nord38100 - 38559 Telefon: +49 7191 482-221Telefax: +49 7191 482-280info@murrplastik.dePostcode areas Murrplastik Systemtechnik GmbH01067 - 06928 Vertriebsgebiet Ost07318 - 07989 Telefon: +49 33762 819 7408056 - 19417 Telefax: +49 33762 819 7536404 - 36469 info@murrplastik.de39104 - 3964998527 - 99998Postcode areas Murrplastik Systemtechnik GmbH32657 - 35119 Vertriebsgebiet West35260 - 35288 Telefon: +49 7191 482-22736179 - 36289 Telefax: +49 7191 482-28037073 - 37699 info@murrplastik.de38640 - 3889944135 - 4984958089 - 59969Postcode areas Murrplastik Systemtechnik GmbH35216 - 35239 Vertriebsgebiet Süd-West35305 - 36169 Telefon: +49 7191 482 -210 -23436304 - 36399 Telefax: +49 7191 482-28040210 - 42929 info@murrplastik.de50126 - 5764860308 - 6951874706 - 7493976726 - 7689197900 - 97999Postcode areas Murrplastik Systemtechnik GmbH86720 - 86759 Vertriebsgebiet Nord-Bayern90402 - 93499 Telefon: +49 7191 482-22695028 - 97896 Telefax: +49 7191 482-280info@murrplastik.dePostcode areas Murrplastik Systemtechnik GmbH70173 - 74679 Vertriebsgebiet Süd75015 - 76709 Telefon: +49 7191 482-220 -233-216 -24777652 - 79879 Telefax: +49 7191 482-28088045 - 88099 info@murrplastik.de88212 - 8929989518 - 89619Postcode areas Murrplastik Systemtechnik GmbH80331 - 86706 Vertriebsgebiet Süd-Bayern86807 - 87789 Telefon: +49 7191 482-23788131 - 88179 Telefax: +49 7191 482-28089312 - 89447 info@murrplastik.de94032 - 94579Sales agencies/abroadArgentinaAustraliaNakase SRLCalle 49, Nr. 5764/66, B1653AOXVilla Ballester, Provincia Buenos AiresTelefon: +54 11 476 842 42Telefax: +54 11 476 842 421 11nakase@nakase.com;ventas@nakase.comwww.nakase.comN.L. Tucker & AssociatesPty. Ltd.12 b Pitt WayBooragoon, Perth,Western Australia 6154Telefon: +61 89 330 79 11Telefax: +61 89 317 15 44sales@nltucker.com.auN.L. Tucker & AssociatesPty. Ltd.50 Marni StreetDandenong South Victoria 3175Telefon: +61 39 706 66 91Telefax: +61 39 706 66 92vicsales@nltucker.com.auBrazilChinaMurrelektronik do Brasil Ltda.Av. Interlagos 349304661-200 São PauloTelefon: +55 11 563 110 17Telefax: +55 11 563 109 00info@murrelekronik.com.brwww.murr.com.brMurrplastik Asia Co., Ltd.1802 Rm. No. 218Hengfeng Rd.200070 ShanghaiTelefon: +86 21 512 869 25Telefax: +86 21 512 869 29info@murrplastik.com.cnwww.murrplastik.com.cnCzech Republic Schmachtl CZ spol. s.r.o.ElektrotechnikaVestec 185252 42 JeseniceTelefon: +422 440 015 00Telefax: +422 449 107 00office@schmachtl.czwww.schmachtl.czFranceGreat BritainGreeceMurrtechnic S.à.r.lZone Industrielle Sud6 rue ManurhinB.P. 6268120 RichwillerTelefon: +33 389 570 010Telefax: +33 389 530 966murrtechnic@murrtechnic.frwww.murrtechnic.euMurrelektronik Ltd.Albion StreetPendlebury Industrial Estate, SwintonManchester M27 4FGTelefon: +44 161 728 31 33Telefax: +44 161 728 31 30sales@murrelektronik.co.ukwww.murrelektronik.co.uk2 Kappa Ltd.Stadiou 4057009 Thessaloniki (Kalohori)Telefon: +30 2310 775 512Telefax: +30 2310 775 514info@2kappa.grAustriaBelgiumMurrplastik Systemtechnik GmbHFabrikstraße 1071570 Oppenweiler (Deutschland)Telefon: +43 732 660 870Telefax: +43 732 660 872info@murrplastik.atwww.murrplastik.atATEM NV/SABedrijven Park De Veert 42830 WillebroekTelefon: +32 38 661 800Telefax: +32 38 661 828info@atem.beDenmarkFinlandBrødrene Eegholm A/SGrundtvigs Allé 165-1696400 SønderborgTelefon: +45 73 121 212Telefax: +45 73 121 213eegholm@eegholm.dkMurrelektronik OyKoukkukatu 115700 LahtiTelefon: +358 388 240 00Telefax: +358 388 240 40myynti@murrelektronik.fiHong KongHungaryWorldtex & Co. (HK) Ltd.Unit 11, 11/F., Tins Enterprises Centre,777 Lai Chi Kok Rd., Cheung Sha Wan,Kowloon, Hong KongTelefon: +852 2781 18 60Telefax: +852 2781 47 33info@worldtex-co.com.hkTechnika G.K.M. Kft.Csiki u. 1.2040 BudaörsTelefon: +36 23 424 888Telefax: +36 23 424 858wieland@technikagkm.huwww.technikagkm.hu76


Sales agencies/abroadIndiaIsraelRajdeep Automation Pvt LtdSurvey # 143, Pune Sinhaghad RoadVadgaon DhayriPune 411 041Telefon: +91 22 238 280 92Telefax: +91 22 238 932 52info@rajdeep.inwww.rajdeep.inEL-KAM Agencies and Trading Ltd.26, Ha‘ta‘as St.44425 Kfar-SabaTelefon: +972 9 765 88 08Telefax: +972 9 765 85 45el-kam@el-kam.comPortugalSingaporeF.Fonseca, S.A.Rua João Francisco do Casal, 87/89Apartado 3003 - Esgueira3801-997 AveiroTelefon: +351 234 303 900Telefax: +351 234 303 910ffonseca@ffonseca.comBalluff Asia Pte. Ltd.Blk 1004, Toa Payoh Industrial ParkLorong 8, # 03 - 14 89Singapore 31 90 76Telefon: +65 6 252 43 84Telefax: +65 6 252 90 60balluff@balluff.com.sgSwedenSwitzerlandJ.Y. Automation System ABVikhemsvägen 9241 38 EslövTelefon: +46 413 692 20Telefax: +46 413 692 21info@automationsystem.sewww.automationsystem.seMurrplastik AGRatihard 408253 WillisdorfTelefon: +41 52 646 06 46Telefax: +41 52 646 06 40info@murrplastik.chwww.murrplastik.chItalyJapanLithuaniaNetherlandsNorwayPolandMurrplastik Italia S.r.l.Via Circo, 1820123 - MilanoTelefon: +39 02 856 805 70Telefax: +39 02 805 034 69info@murrplastik.itwww.murrplastik.itKitagawa Industries Co. Ltd.Sales Dept. attention: Mr. S. NishikawaSengoku Bldg. 6F2-4-15 Nihonbashi-MuromachiChuo-Ku, TOKYO 103-0022Telefon: +81 3 324 113 03Telefax: +81 3 525 564 35nisikawa@kitagawa-ind.co.jpwww.kitagawa-ind.comHIDROTEKA Engineering ServicesChemijos 29E51333 KaunasTelefon: +370 37 352 195Telefax: +370 37 760 500arunas@hidroteka.ltwww.hidroteka.ltMurrelektronik B.V.Meerpaal 14904 SK Oosterhout (NB)Telefon: +31 162 492 411Telefax: +31 162 492 415sales@murrelektronik.nlwww.murrelektronik.nlMurrelektronik A/SKartverksveien 123504 HonefossTelefon: +47 32 179 080Telefax: +47 32 179 090post@murrelektronik.nowww.murrelektronik.noPOLTECHNIK Sp. z o.o.ul. Trojkatna 154-414 WroclawTelefon: +48 71 353 86 94Telefax: +48 71 353 86 96info@poltechnik.plwww.poltechnik.plSlovakiaSloveniaSouth AfricaSouth KoreaSpainSCHMACHTL SK s.r.o.Valchárska 3821 09 BratislavaTelefon: +42 12 582 756 11Telefax: +42 12 582 756 01office@schmachtl.skSenzorji SB d.o.o.Ulica Kirbisevih 53a2204 Miklavz na Dravskem poljuTelefon: +386 2 629 03 00Telefax: +386 2 629 03 02senzorji.sb@siol.netInnomatic42 Monte Carlo CrescentKyalami Park, MidrandGautengTelefon: +27 11 466 01 74Telefax: +27 11 466 02 23sales@innomatic.co.zaKPI Co. Ltd.B-123 neo business center14-7 Pal Yong-DongKyung Sang Nam-Do641-465 Chang Won CityTelefon: +82 551 284 88 25Telefax: +82 551 287 79 54kpi@kpikorea.comWooil Engineering Corp.Room #801, 403dong,Bucheon Techno parkYakdae-don, Bucheon-siKyunggi-doTelefon: +82 32 326 57 01Telefax: +82 32 326 57 14wooil@wooilcns.co.krwww.wooilcns.co.krMurrplastik S.L.Paseo Ubarburu, 76Pabellón 34, poligono 2720014 San SebastiánTelefon: +34 943 444 837Telefax: +34 943 472 895info@murrplastik.eswww.murrplastik.esTaiwanThailandTurkeyUkraineUSALintronix Co., Ltd.4F, No. 651-6, Chung Cheng Road, 242Hsin ChuangTaipei, TaiwanTelefon: +886 2 290 816 66Telefax: +886 2 290 816 78info@.lintronix.com.twwww.lintronix.com.twAutonix Co., Ltd.3.FL., 124 Chung-Cheng Road,Shihlin 11145Taipei, TaiwanTelefon: +886 2 886 612 34Telefax: +886 2 886 612 39day111@ms23.hinet.netCompomax Company Ltd.16 Soi Ekamai 4, Sukhumvit 63 Rd.Prakanongnua, VadhanaBangkok, 10110Telefon: +66 2 726 95 95Telefax: +66 2 726 98 60info@compomax.co.thPinar Mühendislik LTD. ŞTD.Perpa Ticaret MerkeziA Blok Kat 11 No:147780270 Okmeydani-IstanbulTelefon: +90 212 220 02 77Telefax: +90 212 220 13 16info@pinarmuh.comwww.pinarmuh.com.trRopla ElektronikSolomenskaya Str. 1Office No 205-20903035 KiewTelefon: +380 44 248 80 48Telefax: +380 44 248 81 17info@ropla.kiew.uaMurrplastik Systems Inc.2367 North Penn RoadSuite 200Hatfield, PA 19440Telefon: +1 215 822 76 25Telefax: +1 215 822 76 26cablemgmt@murrplastik.comwww.murrplastik.com77


All information with respect to the chemical and physical properties of Murrplastikproducts as well as application advice given verbally, in writing or by tests, is givento the best of our knowledge.It does not exempt the purchaser from the duty to carry out inspections and tests todetermine the exact suitability of the products for the intended use.The purchaser is solely liable for the application, use, and installation of the products.He must also comply with the legal and official provisions, and observe anyindustrial property rights of third parties.Our General Terms and Conditions apply.Subject to technical alterations.


Head OfficeGermanyAustriaChinaFrance*0401RA*0401RAMurrplastik Systemtechnik GmbHPostfach 114371567 OppenweilerA +49 7191 48 20E +49 7191 482 280www.murrplastik.deinfo@murrplastik.deItalyMurrplastik Italia S.r.L.Via Circo, 1820123 MilanoA +39 02 856 805 70E +39 02 805 034 69www.murrplastik.itinfo@murrplastik.itMurrplastik Systemtechnik GmbHA +43 732 660 870E +43 732 660 872www.murrplastik.atinfo@murrplastik.atSpainMurrplastik S.L.Paseo Ubarburu, 76Pabellón 34, polígono 2720014 San SebastiánA +34 943 444 837E +34 943 472 895www.murrplastik.esinfo@murrplastik.esMurrplastik Asia Co., Ltd.1802 Rm. No. 218Hengfeng Rd.200070 ShanghaiA +86 21 512 869 25E +86 21 512 869 29www.murrplastik.com.cninfo@murrplastik.com.cnSwitzerlandMurrplastik AGRatihard 408253 WillisdorfA +41 52 646 06 46E +41 52 646 06 40www.murrplastik.chinfo@murrplastik.chMurrtechnic S.à.r.lZone industrielle Sud, 6 rue ManurhinB.P. 62, 68120 RichwillerA +33 389 570 010E +33 389 530 966www.murrtechnic.eumurrtechnic@murrtechnic.frUSAMurrplastik Systems Inc.2367 North Penn RoadSuite 200Hatfield, PA 19440A +1 215 822 76 25E +1 215 822 76 26www.murrplastik.comcablemgmt@murrplastik.com*MP8902804010*MP8902804010

More magazines by this user
Similar magazines