Worm-Drive Hose Clamps - Electronic Fasteners Inc

electronicfasteners.com
  • No tags were found...

Worm-Drive Hose Clamps - Electronic Fasteners Inc

STANDARD WORM-DRIVE HOSE CLAMPSSAE TYPE “F”®Also called Worm-Gear hose clamps. These are the most commonly used hose clamps. They are economicaland reusable. These clamps have a 1/2” wide stainless steel band and a 5/16” slotted hex head screw. Thebanding detaches from the housing so you can install and remove these clamps without disconnecting the hoseor tube. Not recommended for use with silicone (soft) hose or tube.All VERTEX worm-drive hose clamps are manufactured in compliance with ANSI / SAE J 1670recognized standard, entitled “Type F clamps for plumbing applications”.Hose Clamp ConstructionW60=201/301 Stainless steel band & housing with zinc- plated screwW30=201/301 Stainless steel band & housing with 410 Stainless steel screwW40=All 300 Grade Stainless steel band, housing and screw. Marine Grade.•Uniform Plumbing Code Certified by the IAPMO.W40 Standard clamp onlyW50=All 316 Grade Stainless steel band, housing and screw.Superior corrosion-resistance.W30-40W30-12SAESIZE6810121620242832364044485256606472808896104128W60 W30 W40 W50W60-6W60-8W60-10W60-12W60-16W60-20W60-24W60-28W60-32W60-36W60-40W60-44W60-48W60-52W60-56W60-60W60-64W60-72W60-80W60-88W60-96W60-104W30-6W30-8W30-10W30-12W30-16W30-20W30-24W30-28W30-32W30-36W30-40W30-44W30-48W30-52W30-56W30-60W30-64W30-72W30-80W30-88W30-96W30-104W40-6W40-8W40-10W40-12W40-16W40-20W40-24W40-28W40-32W40-36W40-40W40-44W40-48W40-52W40-56W40-60W40-64W40-72W40-80W40-88W40-96W40-104W40-128W50-6W50-8W50-10W50-12W50-16W50-20W50-24W50-28W50-32W50-36W50-40W50-44W50-48Other sizes available upon request. Contact us.Durability Torque: W60 Series 50 lbs.- in.W30, W40 & W50 Series 60 lbs.- in.Installation Torque: Good practice indicates to install at 50% to 70%of the rated Durability Torque.3


UPC stamp on housingW40-28ClampRange (in.)ClampRange (mm)SAESIZE7/16 - 3/41/2 - 7/81/2 - 1-1/161/2 - 1-1/413/16 - 1-1/213/16 – 1-3/41-1/16 - 21-5/16 – 2-1/41-9/16 – 2-1/21-13/16 – 2-3/42-1/16 – 32-5/16 – 3-1/42-9/16 – 3-1/22-13/16 – 3-3/43-1/16 – 43-5/16 – 4-1/43-9/16 – 4-1/24-1/8 – 54-5/8 – 5-1/25-1/8 – 65-5/8 – 6-1/26-1/8 – 75-11/16 – 8-1/211 - 2013 - 2314 - 2718 - 3221 – 3821 – 4427 – 5135 – 5740 – 6346 – 7052 – 7659 – 8265 – 8972 – 9578 – 10184 – 10891 – 114105–127118-140130-152143-165155-178144-2166810121620242832364044485256606472808896104128W40-20W60-244


ABOUT HOSE CLAMPS®Worm-DriveAlso called Worm-Gear hoseclamps. These are the most commonlyused hose clamps. They areeconomical and reusable. Theseclamps have banding that detachesfrom the housing so you can installand remove them without disconnectingthe hose or tube. Notrecommended for use with silicone(soft) hose or tube.SAE No.Society of Automotive Engineersindustry size designation for themaximum ID of worm-driveclamps (except for constanttensionand high-torque styles)according to SAE J1508.TorqueThe amount of force timesdistance (in either inch-poundsor Newton-meters) that is usedto tighten the nut on a clamp.Worm-Drive, Miniature andT-Bolt clamps have a maximumtorque rating to insure aproper seal. Do not tightenbeyond the maximum torquelimit as clamps can be damagedand cause leaks. Theproper torque is unique foreach application and must bedeveloped by the end user.MINIATURE WORM-DRIVE HOSE CLAMPS - SAE TYPE “M”Also referred to as Mini or Micro hose clamps. These clamps have a 5/16” wide stainless steel bandand a ¼” slotted hex head screw. The low profile housing allows these clamps to be installed in tight areas.W40-6MHose Clamp ConstructionW60=201/301 Stainless steel band & housing with zinc- plated screwW30=201/301 Stainless steel band & housing with 410 Stainless steel screwW40=All 300 Grade Stainless steel band, housing and screw. Marine Grade.W50=All 316 Grade Stainless steel band, housing and screw. Superior corrosion-resistance.W40-8MSAESIZEW60 W30 W40 W50ClampRange (in.)ClampRange (mm)46810W60-4MW60-6MW60-8MW60-10MW30-4MW30-6MW30-8MW30-10MW40-4MW40-6MW40-8MW40-10MW50-4MW50-6MW50-8MW50-10M1/4 - 5/85/16 - 7/83/8 - 13/8 - 1-1/166 - 168 - 2210 - 2510 - 27Other sizes available upon request. Contact us.Durability Torque: W60 & W30 Series 20 lbs.- in.W40 & W50 Series 15 lbs.- in.Installation Torque: Good practice indicates to install at 50% to 70% of the rated Durability Torque.5


YOUR SOURCE FOR INCH AND METRIC FASTENERS IN STAINLESS, BRASS,SILICON BRONZE, NICU400, AND ALUMINUM.......Cap Screws and BoltsCarriage BoltsHex Head (F593)Lag BoltsTap Bolts (F593)Lock WashersExternal ToothHigh CollarInternal ToothLightMediumMachine ScrewsSemsSlotted BinderSlotted FillisterSlotted/Phillips Flat (82º and 100º)Slotted/Phillips OvalSlotted/Phillips RoundSlotted/Phillips TrussSquare Drive Deck ScrewsTrimmed Hex HeadIndented Hex HeadPhillips Pan Type FNutsCap NutsCoupling NutsExtra Small Pattern Hex M/S NutsFinished Hex Jam NutsFinished Hex NutsHeavy Hex NutsK-Lock NutsKnurled NutsMachine Screw NutsNylon Insert Lock Nuts (Reg. & Thin)Small Pattern Hex M/S NutsSquare NutsWing Nuts (Cold Formed)Serrated Flange NutsPinsCotter PinsDowel PinsSelf Drilling Screws TEK 410ssPhillips PanHex Washer HeadSheet Metal ScrewsHex Washer HeadSlotted/Phillips Flat (82º)Slotted/Phillips OvalSlotted/Phillips RoundSlotted/Phillips TrussSocket ScrewsButton Socket CapFlat Socket CapSocket CapSocket Set Screws - Cup PointSquare Head Set ScrewsStripper BoltsU Drive ScrewsThreaded RodLengths: 3', 6', & 12'Finished Hex NutsWashersAN960C (Dimensional only)BellevilleFender WashersFinishing Cup WashersMS 15795 (Dimensional only)N400P (Dimensional only)SAEStandard Flat WashersNAS620C (Dimensional only)AND FULL RANGE OF ALLOY METRIC FASTENERSPartial List of DINs in StockCap Screws and BoltsDin 603 - Carriage BoltsDin 580 - Lifting Eye BoltsDin 931 - Partial Thread Hex CapDin 933 - Full Thread Hex CapDin 960 - Fine Thread/Partial Thread Hex CapDin 961 - Fine Thread/Full Thread Hex CapDin 692 - Non Serrated Flange BoltsMachine ScrewsDin 84 - Slotted Cheese HeadDin 85 - Slotted Pan HeadDin 963 - Slotted Flat HeadDin 964 - Slotted Oval HeadDin 965 - Phillips Flat HeadDin 966 - Phillips Oval HeadDin 7985 - Phillips Pan HeadISO 7380 Button Head Socket Cap ScrewNutsDin 315 - Wing NutsDin 439 - Hex Low NutsDin 929 - Weld NutsDin 934 - Hex NutsDin 935 - Castle NutsDin 980V - Prevailing Torque NutsDin 985 - Nylon Insert Lock NutsDin 6334 - Coupling NutsDin 6923 - Non -Serrated Flange NutsK-Lock NutsT-NutsASTM A194 2H HeavyPinsDin 94 - Cotter PinsDin 6325 - Hardened Dowel PinsDin 1481 - Roll Pin (Spring Pin)Retaining RingsDin 471 - External Retaining RingsDin 472 - Internal Retaining RingsSocketsDin 912 - Socket Cap ScrewsDin 913 - Socket Set Screw-Flat PtDin 914 - Socket Set Screw-Cone PtDin 915 - Socket Set Screw-Dog PtDin 916 - Socket Set Screw-Cup PtDin 7985 - Low Head Socket C/SDin 7991 - Flat Head Socket C/SThreaded RodDin 976 - Gr. 4.6, 8.8, B7WashersDin 125 - Flat WashersDin 125-200HV-Hardened FlatDin 127 - Lock WashersDin 137 - Spring (Wave) Washers(Type A & B)Din 6796 - Conical Spring WashersDin 6797A- External Tooth L/WDin 6797J - Internal Tooth L/WDin 6916 - Structural WashersDin 7980 - High Collar L/WAND FULL LINE OF BLIND RIVETS IN ALUMINUM, STEEL, AND STAINLESS STEELTypesOpenClosed-EndMulti-GripStructural RivetsBack-up WashersStylesDome HeadLarge FlangeCountersunkPlease Call or See Our Catalog For The Full Line of Metric Fasteners We Stock,And Availability To Over 50,000 Items With a Delivery of 3 to 4 Weeks.Material: Alloy Gr. 4.6, 8.8, 10.9, 12.9 - Plain, Zinc Plated and Zinc Yellow • Stainless: A2 and A4 • BrassMill Shipments Available • Online ordering available • Visit our Website: www.vertexdistribution.comBranches in: Attleboro, MA (800)888-2355 • Elk Grove Village, IL (800)283-2355 • Chatsworth, CA (888)798-0091Houston, TX (800)678-2555 • Charlotte, NC (800)825-2355 • Cleveland, OH (800)284-2355Tampa, FL (800)688-2358 • Arlington, TX (800)678-2555 • Atlanta, GA (888)798-0093®


HEAVY DUTY T-BOLT HOSE CLAMPS®A removable bolt and hinged, floating bridge enable this clamp to be opened fully for quick and easyinstallation and removal. The T-Bolt hose clamp has a wider, thicker band than most clamps, plus bevelededges that prevent hose damage. It is tightened with a T-Bolt, trunnion, and nut for the basic style latch.T-Bolt hose clamps provide greater band tension for the same amount of torque as a worm-drive hose clamp.Hose Clamp ConstructionT2 = 430 Stainless Steel band & housing with grade 8.8 zinc-plated screwT4 = All 304 Stainless steel band, housing and screw. Marine Grade.T2 SeriesT4 SeriesClampingRange (in.)ClampingRange (mm)Torquelbs.- in.T4-250T2-16508T2 – 7508T2 – 8008T2 – 8508T2 – 10008T2 – 10508T2 – 11008T2 – 12008T2 – 12508T2 – 14008T2 – 15008T2 – 16508T2 – 17508T2 – 20008T2 – 21008T2 – 22508T2 – 23808T2 – 25008T2 – 27508T2 – 30008T2 – 32508T2 – 35008T2 – 37508T2 – 40008T2 – 42508T2 – 45008T2 – 50008T2 – 52508T2 – 57508T2 – 60008T2 – 65008T2 – 70008T2 – 75008T2 – 80008T2 – 85008T2 – 90008T2 – 95008T2 – 100008T4 – 7508T4 – 8008T4 – 8508T4 – 10008T4 – 10508T4 – 11008T4 – 12008T4 – 12508T4 – 14008T4 – 15008T4 – 16508T4 – 17508T4 – 20008T4 – 21008T4 – 22508T4 – 23808T4 – 25008T4 – 27508T4 – 30008T4 – 32508T4 – 35008T4 – 37508T4 – 40008T4 – 42508T4 – 45008T4 – 50008T4 – 52508T4 – 57508T4 – 60008T4 – 65008T4 – 70008T4 – 75008T4 – 80008T4 – 85008T4 – 90008T4 – 9500.67 - 0.750.75 - 0.830.83 - 0.910.91 - 0.980.98 - 1.061.06 - 1.141.14 - 1.221.22 - 1.341.34 - 1.461.46 - 1.571.57 - 1.691.69 - 1.851.85 - 2.012.01 - 2.172.17 - 2.322.32 - 2.482.48 - 2.682.68 - 2.872.87 - 3.113.11 - 3.353.35 - 3.583.58 - 3.823.82 - 4.094.09 - 4.414.41 - 4.764.76 - 5.125.12 - 5.515.51 - 5.915.91 - 6.386.38 - 6.856.85 - 7.367.36 - 7.877.87 - 8.398.39 - 8.908.90 - 9.419.41 - 9.929.92 - 10.8317 - 1919 - 2121 - 2323 - 2525 - 2727 - 2929 - 3131 - 3434 - 3737 - 4040 - 4343 - 4747 - 5151 - 5555 - 5959 - 6363 - 6868 - 7373 - 7979 - 8585 - 9191 - 9797 - 104104 - 112112 - 121121 - 130130 - 140140 - 150150 - 162162 - 174174 - 187187 - 200200 - 213213 - 226226 - 239239 - 252252 - 275626262626262142142142142142142142142142142142221221221221221221221221221443443443443443443443443443443443


HEAVY DUTY CONSTANT TENSIONT-BOLT HOSE CLAMPS®Also called Constant Torque T-Bolt hose clamps. These spring-loaded clamps apply constant tensionto the hose and provides a strong, leak-proof seal in applications where variances in operating temperaturesoccur.Hose Clamp ConstructionCT= 430 Stainless steel band and arch band.302/304 Stainless steel disc spring & sleeveStainless steel “Belleville” washer.Plated steel boltCT SeriesClampingRange (in.)ClampingRange (mm)Max. Torquelbs.- in.08CT-27508CT-30008CT-32508CT-35008CT-37508CT-40008CT-42508CT-45008CT-5002.68 - 2.872.87 - 3.113.11 - 3.353.35 - 3.583.58 - 3.823.82 - 4.094.09 - 4.414.41 - 4.764.76 - 5.1268 - 7373 - 7979 - 8585 - 9191 - 9797 - 104104 - 112112 - 121121 - 130220220220220220220220220220We recommend usage at 75% of the maximum valueCT-400CT-275VERTEX is proud to offer Mikalor SUPRA W2 , SUPRA W4 , and SUPRACT branded hose clamps.

More magazines by this user
Similar magazines