Photo: Wilco Pijnenburg, The Netherlands
The Prolyte Barrier is a lightweight crowd control system
made of aluminium. The barrier has an self-weight of only
35 kg per 1 m section.
The smooth round top bar and the bottom bar incorporate a
stainless steel 15 mm slot pin that provides easy connection
points for the barriers. The bottom side can be secured using
a hexagon socket head screw (M 12 x 150 mm).
All profiles have soft, rounded edges for maximum comfort.
The design load of the barrier is 4,5 kN/m 1 .
The crowd barrier folds flat after use and can be stacked in
dollies for easy transportation and storage.
Apart from the standard 1 m sections, the Barrier can be
delivered featuring several corner types, with extended
platform sections, and in a Snake Gate version.
Furthermore, Prolyte can deliver the barrier featuring your
own logo upon request.
The Prolyte Barrier was developed for use as a safety device
to control crowds in various types of occasions ranging from
pop concerts to outdoor events. The crowd barrier offers a
combination of optimum safety and comfort for the audience
and a safe working area for rescue personnel.
The crowd barrier is designed as a demountable structure;
setup and assembly are quick and easy, requiring a minimum
amount of tooling.
The crowd barrier was designed in accordance with strict
design criteria and complies with all health and safety
regulations such as; “Temporary Demountable Structures”,
“Technical Standards for Places of Entertainment”, DIN 4113
and BS 8118.
TEchNIcAl SPEcIFIcATIoNS BARRIER
Storage volume 1070 x 1242 x 90 mm
Self weight alu barrier 35 kg/piece 1m
Design load 4,5 kN/m 1
Complies with EN 13200 & temporary
BAR -11-105 BAR -11-122,5 BAR -11-145
BAR -11-002 BAR -11-003
The Prolyte Barrier range is extended by the flex corner.
In terms of angle, this corner can vary from 90-270 degrees
and fits seamlessly with the standard Prolyte Barrier.
The flex corner is equipped with a robust heavy-duty hinge
which is capable of absorbing all the forces to which the
barrier may be subjected.
The flex corner can be used as an inside as well as an outside
corner. Prolyte has designed 2 inlay plates for a 90-degree
and a 135-degree set up, respectively. other inlay plates can
be manufactured on request. The flex corner can be used
without the inlay plate.
Prolyte has designed a 2-step extension for the barrier
which can be used to create either a step-up possibility
or a complete walking platform for security personnel.
This extension provides enhanced safety as well as better
reach and possibilities to address with respect to the public
behind the crowd barrier.
The specially designed barrier dolly makes transporting the
barriers easy. This robust steel dolly holds 10 standard 1 m
Just load the Prolyte barriers on top of each other onto the
dolly. A set of 4 sturdy castor wheels makes transportation
and the loading of the dolly easy. The dollies can be stacked
onto each other for further space saving.
BAR -10-010 / 011
BAR-10-010 are without wheels
BAR-10-011 are with wheels
BAR -10-010 / 011
BAR -10-010 / 011
The Prolyte Snake Gate is a specially designed barrier to
accommodate the transit of your cables (“snake”) from the
stage to front of house (Foh). A special gate, with a sturdy
plate on top, protects your cables from sharp edges and
200 600 200
facilitates the placing of the barriers once the cables are
already in place. The integrated door facilitates access from
stage to Foh for working technicians or security personnel.