Buffalo Wild Wings

DIVISION 6 - WOODS AND PLASTICSSECTION 06100 - ROUGH CARPENTRYIndicated on Drawings as:Dimensional Framing Lumber and Wood Blocking(WD FRAMING): Wood framing lumber.(WD BLKG): Exposed or concealed wood blocking.Construction Plywood and Sheathing(SHTG-1): Wall Sheathing:1. Plywood Wall Sheathing: DOC PS 1, C-D, exposure 1, structural 1. 1/2"nominal thickness. - Or -2. Oriented Strand Board Wall Sheathing: DOC PS 2, exposure 1, structural 1.1/2" nominal thickness.(SHTG-2): Plywood Roof Sheathing: DOC PS 1, C-D, exterior, structural 1; 3/4" nominalthickness. Tongue and Groove.(SHTG-3): Concealed Plywood: DOC PS 1, C-C Plugged, exposure 1. Thickness asindicated on drawings.(SHTG-4): Exposed Plywood: DOC PS 1, A-D, interior grade. Thickness asindicated on drawings.(SHTG-5): Electrical Panel Boards: APA rated sheathing, fire retardant treated. 3/4”nominal thickness.Treated Wood Material(PT): Preservative treated wood materials.(FT): Fire retardant treated wood materials.Fiber Cement Siding and Trim(Fiber Cement Siding): 5/16” thick, vertical siding panels, smooth texture.(Fiber Cement Soffit): 1/4" thick, soffit panel, smooth texture.(Fiber Cement Trim): 1” thick, trim boards, width as indicated, smooth texture.Membrane Underlayment: 40 mil. thick, self-adhering sheet underlayment at Entry Canopy.SECTION 06200 - FINISH CARPENTRYIndicated on Drawings as:Items furnished by Owner’s Millwork Vendor:(WD1): White Maple, transparent finish.(WD2): Southern Pine.Factory Finished Millwork: WIC Manual of Millwork, Section 5, System #5 - CatalyzedPolyurethane, Clear.Accessories for Section 06200(Adjustable Shelf Brackets): Brackets and standards, white finish.SECTION 06410 – CUSTOM CABINETSItems furnished by Owner’s Millwork Vendor:(WD1): White Maple, transparent finish.Material Identification Codes List 04-27-1100011-4