Lathe System PD 400/CNC MICRO Miller FF 500/CNC
Lathe System PD 400/CNC MICRO Miller FF 500/CNC
Lathe System PD 400/CNC MICRO Miller FF 500/CNC
- No tags were found...
Transform your PDFs into Flipbooks and boost your revenue!
Leverage SEO-optimized Flipbooks, powerful backlinks, and multimedia content to professionally showcase your products and significantly increase your reach.
<strong>Lathe</strong> <strong>System</strong> <strong>PD</strong> <strong>400</strong>/<strong>CNC</strong><strong>MICRO</strong> <strong>Miller</strong> <strong>FF</strong> <strong>500</strong>/<strong>CNC</strong>
Precision and high repeat accuracy for individual part<strong>Lathe</strong> <strong>System</strong> <strong>PD</strong> <strong>400</strong>/<strong>CNC</strong> High quality RÖHM precision3-jaw lathe chuck. With ø 100mm.Powerful condenser motor with 550W.Multiple steel holdheight-adjustable hStep motor 1.8A fortravel distance 70mm.Recirculating bfor the X axisinclination.<strong>CNC</strong> control of z-axis and x-axis enableComplete with <strong>CNC</strong> control unit and WINDOWS®compatible software.Axes drive with powerful step motors and recirculatinand longitudinal turning, for turning balls, radii and anynon-ferrous metal. Work piece machining is effectedreproduced as often as required. Otherwise the mecproven PROXXON <strong>Lathe</strong> <strong>PD</strong> <strong>400</strong>: Solid, cross-bracelegged prism guide for apron and tailstock ensure vibraHigh quality RÖHM precision 3-jaw lathe chuck (ø 100are provided via belt drive. Including rotating centre
s and small series manufacture. Made in Europe.Double roller bearing recirculating ball spindlepaired with powerful step motor driven inmicro-step guarantee high machiningprecision and repeat accuracy.er witholder elements.Recirculating ballspindle for the Z axiswith 4mm inclination.Step motor 1.8Afor travel distance 300mm.all spindlewith 2.0mmg ball spindles (no backlash). For facingfreely formed contours made of steel andautomatically by software and can behanical design is almost identical to thed cast iron bed with ground and widetion-free working and optimum precision.mm). 6 spindle speeds (80 – 2,800/min)MK 2 and tailstock chuck. With quicksprecise turning, facing and longitudinal turning of steel and non-ferrous metal.change tool post with 2 holders (with stop and height adjustability). The accessories suppliedfor the PROXXON <strong>Lathe</strong> <strong>PD</strong> <strong>400</strong> can be used without restriction (including the Mill/Drill PF <strong>400</strong>).Complete with recirculating ball spindles, powerful step motors and the required limit switches,the <strong>CNC</strong> control unit, all necessary connecting cables and WINDOWS® compatible software onCD-ROM.Detailed technical data are listed on the back!NO 24 <strong>500</strong>
<strong>MICRO</strong> <strong>Miller</strong> <strong>FF</strong> <strong>500</strong>/<strong>CNC</strong> Powerful, quiet and shock-freerunning condenser motor (<strong>400</strong>W).Poly V-belt drive for 6 spindlespeeds from 180 – 2,<strong>500</strong>/min.Recirculating ball spindle forZ-axis. Drive via step motormounted in column (traveldistance approx. 180mm).Stable columnwith dovetail slideway.Flat-milled table in steel (<strong>400</strong> x125mm) with 3 continuous T-nuts.Step motor for Y-axis (traveldistance approx. 100mm).Step motor for X-axis (traveldistance approx. 290mm).Thanks to <strong>CNC</strong> control of 3 tool axes machining of steel and non-ferrous metals is possible inall dimensions. This also applies to larger work pieces !Axes drive with recirculating ball spindles (no backlash) and powerfulstep motors. Otherwise the mechanical design is almost identicalto the <strong>MICRO</strong> <strong>Miller</strong> <strong>FF</strong> <strong>500</strong>: Solid, flat-milled compound tablein steel with 3 continuous T-slots for size 8 standard T-nuts. Base ofvibration-damping cast steel. Stable column with dovetail sideway.Milling head can be pivoted to the left and right by 90°, with powerful,quiet and shock-free running condenser motor. Poly V-belt drivefor 6 spindle speeds (180 – 2,<strong>500</strong>/min). Additional sleeve feed(30mm) using drilling lever with scale ring (1 graduation line = 1mm).Work piece fixing using steel collets. The accessories supplied forthe PROXXON <strong>MICRO</strong> <strong>Miller</strong> <strong>FF</strong> <strong>500</strong> can be used without restriction.Complete with <strong>CNC</strong> control unit, <strong>CNC</strong> programme software, allconnecting cables, one each steel collets 6 – 8 – 10 and 12mm anddetailed manual.Detailed technical data are listed on the back !NO 24 340
PROXXON CAD/CAM software for WINDOWS®Brief description of software and hardwareThe software is harmonized with mechanics, motors and the controlunit of the <strong>CNC</strong> machine, thus offering the optimum performance.The <strong>CNC</strong> control unit controls the step motors of the machine. ThePC software provides the machine with the geometry informationfor travel of the tools (via RS 232 interface). This means that thecontrol unit is the interface between software and the mechanicsof the machine. Powerful micro processors and accordinglydimensioned step motors and phases ensure that the motorsalways provide enough power for any machining processes. Twofreely usable output relays in the casing of the control unit providefacilities for control of additional functions, e.g. a working lamp.Including connection cables with suitable plugs and built-in powersupply for connection to 220 – 240V.Note:PC or laptop are not part of the scope of delivery.Minimum requirements for the hardware: Pentiumprocessor with <strong>400</strong> MHz frequency (or comparable),high-quality graphic card (64 MB RAM) andat least 40 MB free hard disc storage.Simple creation of work piece geometry in the PC.Simple creation of work piece geometryThe CAD window is displayed when the programme starts. Thework piece contour is created in the familiar WINDOWS® environment.Numerous auxiliary aids help during programme operation,which supports both coordinate entry (absolute and relative) inaddition to mouse use. Read-in of existing files in standard file for-mats (e.g. .dxf or .hpgl) is possible.Technology information is allocated to every drawing element. Thismakes, for example, different processing speeds and manual toolreplacement possible.Automatic generation of CAM dataThe finished drawing of the tool is converted, by a mouse click,into the instruction set for the machine. So, machining can bestarted immediately. The instruction set generated in this way is inaccordance with DIN/ISO 66025 and can be manually edited andexported. Conversely, the system also permits importing or completeself writing of data sets.Manual workThe handwheels are replaced with the step motors of the <strong>CNC</strong>machine. Nevertheless, manual machining is possible with thehelp of cursor buttons, since the step motors can be operatedmanually.<strong>CNC</strong> simulationIf requested, the travel distances of the tool are simulated in thegraphic window. In this way, faults in the programming can berecognised in time.Software installationThe PC software is supplied on a CD ROM. The problem-freeinstallation is effected automatically under WINDOWS®.
Technical dataSteinicke, WittlichPower supplyDrive<strong>PD</strong> <strong>400</strong>/<strong>CNC</strong>220 – 240V / 50/60Hzcondenser motor with 550WRecirculating ball spindle with 2.0mm inclination,flank diameter 8mm.Step motor with 1.8A and 50Ncm dwell moment;travel distance: approx. 70mmRecirculating ball spindle with 4.0mm inclination,flank diameter 12mm.Step motor with 1.8A und 50Ncm dwell moment;travel distance: approx. 300mm6 spindle revolutions 80 – 160 – 330 – 660 – 1,<strong>400</strong> – 2,800/minSelectable with switch (two-stage) and byplacing drive belt.Control of the step motorsvia <strong>CNC</strong> control unit (included in scope ofdelivery)Software on CD-ROM, installation under Windows 98,Windows 2000 and Windows X<strong>PD</strong>rive connectionvia RS 232 interface (or: use of a USB adapter),connecting cables to PC included in scope ofdeliverySizes Machine: L 900 x W 460 x H 300mmControl unit: L 450 x W 270 x H 60mmTotal weightMachine: approx. 45kg / Control unit: approx. 4kg<strong>FF</strong> <strong>500</strong>/<strong>CNC</strong>220 – 240 V/ 50/60Hzcondenser motor with <strong>400</strong>WRecirculating ball spindle with 4.0mm inclination,flank diameter 12mm.Step motor with 2.2A und 1.27Nm dwell moment;travel distance: approx. 290mmRecirculating ball spindle with 4.0mm inclination,flank diameter 12mm.Step motor with 2.2A and 1.27Nm dwell moment;travel distance: approx. 100mmRecirculating ball spindle with 4.0mm inclination,flank diameter 12mm.Step motor with 2.2A and 1.27Nm dwell moment;travel distance: approx. 220mm180 – 350 – 550 – 800 – 1,300 – 2,<strong>500</strong>/minSelectable by placing drive belt.via <strong>CNC</strong> control unit (included in scope of delivery)on CD-ROM, installation under Windows 98, Windows2000 and Windows XPvia RS 232 interface (or: use of a USB adapter),connecting cables to PC included in scope of deliveryMachine: work table 370 x 350mm, table <strong>400</strong> x125mm, total height approx. 780mmControl unit: L 450 x W 270 x H 60 mmMachine: approx. 50kg / Control unit: approx. 4kgSwitch Z-axisSwitch X-axisSwitch Z-axisStep motor (Z-axis)Step motor (X-axis)Step motor(Z-axis)Step motor (X-axis)Step motor (Y-axis)Step motor (X-axis)Switch Y-axisSwitch X-axisStep motor(Y-axis)RS 232MCS-multicontrollerRS 232Computer with softwarePROXXON GmbHIm Spanischen 18 – 24D-54518 Niersbach/EifelComputer with softwareMCS-multicontrollerNO 95 372 PR 308309301O
Change language