KQ2 One touch fittings.pdf - SMC Pneumatics (Ireland)

EMC-KQ2G-01A-UKOne-touch FittingsWith G Type Connection ThreadsSeries KQ2SealCan be used for a wide rangeof pressures from a lowvacuum up to a pressureof 1.0 MPaThe use of a special profileensures sealing and reducesresistance when the tube isinserted.StudBodyO-ringEffective when piping ina confined space.The body and the threadedportion can rotate (To thedegree for positioning)G threadGasketChuckLarge retaining forceHas large retaining force while holdingforce is increased by the collet.ColletGuideTubeRelease button (Light grey)Light force for removalWhen the fitting is removed from thetube, the check and collet arereleased, thus preventing them frombiting into the tube excessively.

One-touch FittingsSeries KQ2Applicable Tubing: Metric SizeConnection Thread: GThe seal gasket on the male thread for piping eliminates the need for pipe tapeMale threadGasketFemale threadG• G threadA gasket made of a stainless sheetcovered with laminated NBR on bothsides is seated on the female threadfor a perfect sealing constructionirrespective of the variations intolerance.• One-touch connection andrelease.• Possible to use in vacuumto -100 kPa.• The male thread for pipingdrastically cuts piping manhours.• Suitable for use with portthreads conforming toISO1179 and ISO16030.SealCan be used for a wide rangeof pressures from a lowvacuum up to a pressure of1.0 MPaThe use of a special profileensures sealing and reducesresistance when the tube isinserted.StudG threadGasketBodyO-ringEffective when piping ina confined space.The body and the threadedportion can rotate (To thedegree for positioning)Applicable TubingTubing materialTubing O.D.Note 1) The soft nylon tube is not available with water.Product’s ColorChuckLarge retaining forceHas large retaining force while holdingforce is increased by the collet.ColletGuideTubeRelease button (Light grey)Light force for removalWhen the fitting is removed from thetube, the check and collet arereleased, thus preventing them frombiting into the tube excessively.FEP,PFA, Nylon, Soft nylon (Note1), Polyurethaneø4, ø6, ø8, ø10, ø12, ø16Series Body Release buttonSeries KQ2 White Light greySpecificationsFluid Air/Water Note 2)Operating pressure rangeProof pressureAmbient and fluid temperature1.0 MPa Note 3)3.0 MPa–5 to 60°C, Water: 0 to 40°C (No freezing)ThreadMounting SectionJIS B0207 (EN ISO228)Nut SectionJIS B0211 Class 2 (Metric fine thread)Note 2) The surge pressure must be under the maximum operating pressure.Note 3) The amount of leakage is not zero, and so the use for holding vacuum such as a leaktester should be avoided.Principal Parts MaterialBodyStudChuckGuideCollet, Release buttonSeal, O-ringGasketC3604BD, PBTC3604BD (Thread portion)Stainless steel 304Stainless steel 304, C3604BD, PBTPOMNBRStainless steel 304, NBR2

One-touch Fittings Series KQ2ModelHex. socket head maleconnectorKQ2SInternal hex. allowsthread connection byusing an allenwrench for confinedspaces.Universal male elbowKQ2VUniversal male elbowallows thread connectionby using a socket wrenchfor confined spaces.Bulkhead ConnectorKQ2EUse to connect malethread and tubethrough a panel.Extended male elbowKQ2WBasically, it is usedtogether with male elbow.Different point is that it isused for fittings to avoidwith interfering with eachother by making the pipingtwo-level.Male connectorKQ2HUse to pipe in thesame direction fromfemale thread. Mostgeneral style.Male branch teeKQ2TUse to branch linefrom female thread inboth 90° directions.Female ConnectorKQ2FUse to pipe frommale thread suchas pressure gauge.Male run teeKQ2YUse to branch line inthe same directionfrom female threadand in 90° direction.Male elbowKQ2LUse to pipe at rightangles to femalethread. Most generalstyle.How to OrderKQ 2 H 06G01Symbol2Product's colorBodyWhiteOne-touchfittingsRelease buttonLight greyApplicable tubing O.D.04 ø406 ø608 ø810 ø1012 ø1216 ø16Port sizeThreadconnectionG01G02G03G04G1 8G 1 4G 3 8G 1 2ModelH Male connectorS Hex. socket head male connectorLMale elbowE Bulkhead connectorV Universal male elbowW Extended male elbowTYFMale branch teeMale run teeFemale connector3

Series KQ2Male Connector: KQ2HMale Elbow: KQ2LMale Branch Tee: KQ2TApplicabletubing O.D.(mm)468101216ConnectionthreadG3 8 KQ2H12-G03 201 81 4ModelKQ2H04-G01KQ2H04-G0213161 81 4KQ2H06-G01KQ2H06-G0213163 8 KQ2H08-G03 203 8 KQ2H06-G03 201 81 41 8KQ2H08-G01KQ2H08-G02KQ2H10-G011416171 43 81 2KQ2H10-G02KQ2H10-G03KQ2H10-G041720241 4 KQ2H12-G02 191 2 KQ2H12-G04 243 8 KQ2H16-G03 241 2 KQ2H16-G04 24Note1) øD1: Max. diameterNote2) øD2: Gasket O.D.Note3) Reference dimensions after G thread installation.Applicabletubing O.D.(mm)468101216Applicabletubing O.D.(mm)468101216H(width acrossflats)KQ2L06-G02ConnectionH(1)thread(widthModelGacross øD1flats)øD23 8 KQ2L12-G03 20 20.9 171 8 KQ2L04-G01 131 4 KQ2L04-G02 1610.4 101 8 KQ2L06-G01 131 416 12.8 103 8 KQ2L08-G03 203 8 KQ2L06-G03 201 81 4KQ2L08-G01KQ2L08-G021316 15.2 121 8 KQ2L10-G01171 4 KQ2L10-G0218.5 173 8 KQ2L10-G03 201 2 KQ2L10-G04 241 4 KQ2L12-G02 171 2 KQ2L12-G04 243 8 KQ2L16-G03 221 2 KQ2L16-G04 2426.5 20.9(1)ØD1L118202326.528.5KQ2T06-G02ConnectionH(1)(2)thread(widthModel across øD1 øD2 øD3Gflats)L13 8 KQ2T12-G03 20 20.9 17 21 28.51 8 KQ2T04-G01 131410.41 104 KQ2T04-G02 1617181 8 KQ2T06-G01 13141 416 12.8 10 17 203 8 KQ2T08-G03 20213 8 KQ2T06-G03 20211 81 4KQ2T08-G01KQ2T08-G021316 15.2 121417 231 8 KQ2T10-G0114171 4 KQ2T10-G021718.5 17 26.53 8 KQ2T10-G03 20211 2 KQ2T10-G04 24251 4 KQ2T12-G02 17171 2 KQ2T12-G04 24253 8 KQ2T16-G03 222126.5 20.91 2 KQ2T16-G04 242534_______________25.725.7(2)øD31417141721141721141721251721252125Note1) øD1: Max. diameterNote2) øD3: Gasket O.D.Note3) Reference dimensions after G thread installation.Note1) øD1: Max. diameterNote2) øD3: Gasket O.D.Note3) Reference dimensions after G thread installation.(2)ØD2141714172114172114172125172125212534L2L21.517.7242319.727.923.923.9303125.527.532322835.537.521.224.222.225.227.223.726.728.225.128.229.734.529.330.835.635.938.4L2 A (3)21.224.222.225.227.223.726.728.225.128.229.734.529.330.835.635.938.416.911.619.416.913.623.317.817.825.424.919.418.925.925.919.429.428.9A (3)21.823.32425.527.526.728.229.729.831.432.935.233.735.237.543.143.121.823.324.025.527.526.728.229.729.831.432.935.233.735.237.543.143.1A (3)M161718.5212225M161718.5212225M161718.5212225L2L2AALMøD1AøD3L1MHøD1øD2L1MøD2ApplicabletubingHConnectionthreadøD3ConnectionthreadApplicabletubingøD12-ApplicabletubingL1MøD2HøD1Connectionthread4

One-touch Fittings Series KQ2Male Run Tee: KQ2YApplicabletubing O.D.(mm)468101216ConnectionthreadGModelKQ2Y06-G01KQ2Y06-G02KQ2Y06-G03KQ2Y08-G01KQ2Y08-G02KQ2Y08-G03KQ2Y10-G01KQ2Y10-G02KQ2Y10-G03KQ2Y10-G04KQ2Y12-G02KQ2Y12-G03KQ2Y04-G01KQ2Y04-G02flats)13162013162017202417201316(1)øD110.412.815.218.520.91 81 41 81 43 83 81 81 41 81 43 81 21 4241 2 KQ2Y12-G043 8 KQ2Y16-G031 2 KQ2Y16-G04H(widthacross2224øD2(2)øD3L1101417181410 17 20211412 1721231417172126.5251717 21 28.52526.5 20.9212536.1Note1) øD1: Max. diameterNote2) øD3: Gasket O.D.Note3) Reference dimensions after G thread installation.L2 A (3)21.224.222.225.227.223.726.728.225.128.229.734.529.330.835.635.938.434.636.137.639.141.142.143.645.146.948.650.152.451.753.255.565.965.9M161718.52122252-ApplicabletubingL1L2AMøD2øD3L1øD1MHConnectionthreadøD1Female Connector: KQ2FExtended Male Elbow: KQ2WApplicable ConnectionH(1)tubing O.D. thread(widthModel across øD1 øD2 L1 L2 L3 M(mm) Gflats)1 8 KQ2F04-G01 144_ 27.7 11.4 7.410161 4 KQ2F04-G02 1733.1 15.8 111 8 KQ2F06-G01 1428.3 11.1 7.46 1 4 KQ2F06-G02 17_12 33.6 15.4 11 173 8 KQ2F06-G03 2135.2 15.7 11.41 8 KQ2F08-G01 1429.7 10.9 7.48 1 4 KQ2F08-G02 17 _14 35.1 15.3 11 18.53 8 KQ2F08-G03 2136.6 15.5 11.41 4 KQ2F10-G02 17 _101736.7 15.3 11213 8 KQ2F10-G03 2138.3 15.5 11.41 4 KQ2F12-G02 1937.3 15.8 1112 3 _8 KQ2F12-G03 21 19 38.8 16.6 11.4 221 2 KQ2F12-G04 2443.9 20.8 153 8 KQ2F16-G031624 24 25.739.4 16 11.4251 2 KQ2F16-G0446.3 22.9 15Note1) øD2: Max. diameterApplicable ConnectionH (1)(2)tubing O.D. thread(widthModel acrossøD1 øD2 øD3 L1 L2 A (3)M(mm) Gflats)14 8 KQ2W04-G01 1314 34.4 3510.4 10 18161 4 KQ2W04-G02 1617 38.9 381 8 KQ2W06-G01 1314 36.9 38.76 1 4 KQ2W06-G02 16 12.8 10 17 20 41.4 41.7 173 8 KQ2W06-G03 2021 42.4 42.71 8 KQ2W08-G01 1314 40.4 43.48 1 4 KQ2W08-G02 16 15.2 12 17 23 44.9 46.4 18.53 8 KQ2W08-G03 2021 45.9 47.41 4 KQ2W10-G02 1717 51.9 5510 3 8 KQ2W10-G03 20 18.5 17 21 26.5 52.9 56 211 2 KQ2W10-G04 2425 58.9 59.51 4 KQ2W12-G02 1717 53 57.412 3 8 KQ2W12-G03 20 20.9 17 21 28.5 54 58.4 221 2 KQ2W12-G04 2425 60 61.93 8 KQ2W16-G03 2216 1 2 KQ2W16-G04 24 26.5 20.9 21 63.8 713425 68.8 73.5 25Note1) øD1: Max. diameterNote2) øD3: Gasket O.D.Note3) Reference dimensions after G thread installation.L2Connection threadL3L2AHøD1L1øD3MøD2ApplicabletubingL1MHøD2øD1ConnectionthreadApplicabletubing5

Series KQ2Hexagon Socket Head Male Connector: KQ2SApplicabletubing O.D.(mm)4681012ConnectionthreadGH(widthacrossflats)33 8 KQ2S12-G031 2 KQ2S12-G04101 8ModelKQ2S04-G011 8 KQ2S08-G011 81 4KQ2S06-G01KQ2S08-G021 43 8KQ2S06-G02KQ2S08-G034561 8 KQ2S10-G01 51 43 81 2KQ2S10-G02KQ2S10-G03KQ2S10-G0481 4 KQ2S12-G02 83 8 KQ2S16-G03 101 2 KQ2S16-G04 12(1)øD11313161416201717202419202425.725.7Note1) øD1: Max. diameterNote2) øD2: Gasket O.D.Note3) Reference dimensions after G thread installation.(2)øD2141417141721141721251721252125L A (3)23242426.628.529.129.329.727.928.432322835.537.518.419.417.92222.42324.723.621.819.825.925.919.429.428.9M161718.5212225MøD1øD2Applicable tubingALConnection threadHBulkhead Connector: KQ2EApplicabletubing O.D.(mm)468101216ConnectionH1threadT (widthModelG(M) acrossflats)3 8 KQ2E16-G03M28x1.51 2 KQ2E16-G04301 8 KQ2E04-G01 14M12x11 4 KQ2E04-G02 171 8 KQ2E06-G011 4 KQ2E06-G02 M14x1173 8 KQ2E08-G03 213 8 KQ2E06-G03 211 8 KQ2E08-G011 4 KQ2E08-G02 M16x1171 43 8KQ2E10-G02KQ2E12-G033 81 2KQ2E10-G03KQ2E12-G04M20x1M22x12224H2(widthacrossflats)141719242732L127.733.128.333.635.229.735.136.636.738.338.843.941.146.2L211.116.511.316.618.29.514.916.414.815.615.120.214.819.9L37.4117.41111.47.41111.41111.411.41511.415Mountinghole131517212329M161718.5212225Mounting platethickness7mm or lessConnection H1threadL3L2L1MH2TApplicabletubingUniversal Male Elbow: KQ2VApplicabletubing O.D.(mm)468101216ConnectionH (1)thread Model(widthacrossøD1 øD2Gflats)3 8 KQ2V12-G031 2 KQ2V12-G0417 20.9 25.21 81 8KQ2V04-G01KQ2V06-G018810.412.814141 4 KQ2V06-G02 10 12.8 173 8 KQ2V08-G03 14 211 8 KQ2V08-G01121 4 KQ2V08-G02 15.217.61 4 KQ2V10-G0220.63 14 18.58 KQ2V10-G03213 8 KQ2V16-G03211 2 KQ2V16-G0426.532.3(2)øD3141417141721172121252125L1222423.528.528.527.5313134343939L213.113.115.414.516.518.718.218.720.323.124.75L3 A (3)25252827.529.534.634.134.637.2404526.25 46.520.420.421.922.923.428.52828.531.131.438.937.9M161718.5212225L3L2AHøD3øD2L1MApplicabletubingConnectionthreadøD1Note1) øD1: Max. diameterNote2) øD3: Gasket O.D.Note3) Reference dimensions after G thread installation.6

One-touch Fittings Series KQ2Handling and PrecautionsCaution1. First tighten by hand, then use a properwrench, which could be suitable for thehexagon across flats on the body totighten with the proper tightening torquegiven below.PrecautionsBe sure to read before handling.Refer to SMC´s "Best Pneumatics" catalogue for Safety Instructions and Common Precautions on the productsmentioned in this catalog.Connecting Female Thread: GNominal size ofG threadRecommendedtightening torque(N·m)1 87 to 91 412 to 143 822 to 241 2 28 to 302. Please consult with SMC if using forother fluids than air.3. Other precautions on handling, etc. arethe same as those of One-touch fittings.Spare Parts ListDescriptionGasketNut for TubePart no.KQ-G01KQ-G02KQ-G03KQ-G04KQ04-P01KQ06-P01KQ08-P01KQ10-P01KQ12-P01KQ16-P01Applicable ThreadG1/8G1/4G3/8G1/2------Applicable Model----KQ2E04-G**KQ2E06-G**KQ2E08-G**KQ2E10-G**KQ2E12-G**KQ2E16-G**7

© DiskArt 1988EUROPEAN SUBSIDIARIES:AustriaSMC Pneumatik GmbH (Austria).Girakstrasse 8, A-2100 KorneuburgPhone: +43 2262-62280, Fax: +43 2262-62285E-mail: office@smc.athttp://www.smc.atFranceSMC Pneumatique, S.A.1, Boulevard de Strasbourg, Parc Gustave EiffelBussy Saint Georges F-77607 Marne La Vallee Cedex 3Phone: +33 (0)1-6476 1000, Fax: +33 (0)1-6476 1010E-mail: contact@smc-france.frhttp://www.smc-france.frNetherlandsSMC Pneumatics BVDe Ruyterkade 120, NL-1011 AB AmsterdamPhone: +31 (0)20-5318888, Fax: +31 (0)20-5318880E-mail: info@smcpneumatics.nlhttp://www.smcpneumatics.nlSpainSMC España, S.A.Zuazobidea 14, 01015 VitoriaPhone: +34 945-184 100, Fax: +34 945-184 124E-mail: post@smc.smces.eshttp://www.smces.esBelgiumSMC Pneumatics N.V./S.A.Nijverheidsstraat 20, B-2160 WommelgemPhone: +32 (0)3-355-1464, Fax: +32 (0)3-355-1466E-mail: post@smcpneumatics.behttp://www.smcpneumatics.beGermanySMC Pneumatik GmbHBoschring 13-15, D-63329 EgelsbachPhone: +49 (0)6103-4020, Fax: +49 (0)6103-402139E-mail: info@smc-pneumatik.dehttp://www.smc-pneumatik.deNorwaySMC Pneumatics Norway A/SVollsveien 13 C, Granfos Næringspark N-1366 LysakerTel: +47 67 12 90 20, Fax: +47 67 12 90 21E-mail: post@smc-norge.nohttp://www.smc-norge.noSwedenSMC Pneumatics Sweden ABEkhagsvägen 29-31, S-141 71 HuddingePhone: +46 (0)8-603 12 00, Fax: +46 (0)8-603 12 90E-mail: post@smcpneumatics.sehttp://www.smc.nuBulgariaSMC Industrial Automation Bulgaria EOOD16 kliment Ohridski Blvd., fl.13 BG-1756 SofiaPhone:+359 2 9744492, Fax:+359 2 9744519E-mail: office@smc.bghttp://www.smc.bgGreeceSMC Hellas EPEAnagenniseos 7-9 - P.C. 14342. N. Philadelphia, AthensPhone: +30-210-2717265, Fax: +30-210-2717766E-mail: sales@smchellas.grhttp://www.smchellas.grPolandSMC Industrial Automation Polska Sp.z.o.o.ul. Poloneza 89, PL-02-826 Warszawa,Phone: +48 22 211 9600, Fax: +48 22 211 9617E-mail: office@smc.plhttp://www.smc.plSwitzerlandSMC Pneumatik AGDorfstrasse 7, CH-8484 WeisslingenPhone: +41 (0)52-396-3131, Fax: +41 (0)52-396-3191E-mail: info@smc.chhttp://www.smc.chCroatiaSMC Industrijska automatika d.o.o.Crnomerec 12, 10000 ZAGREBPhone: +385 1 377 66 74, Fax: +385 1 377 66 74E-mail: office@smc.hrhttp://www.smc.hrHungarySMC Hungary Ipari Automatizálási Kft.Budafoki ut 107-113, H-1117 BudapestPhone: +36 1 371 1343, Fax: +36 1 371 1344E-mail: office@smc.huhttp://www.smc.huPortugalSMC Sucursal Portugal, S.A.Rua de Engº Ferreira Dias 452, 4100-246 PortoPhone: +351 22-610-89-22, Fax: +351 22-610-89-36E-mail: postpt@smc.smces.eshttp://www.smces.esTurkeyEntek Pnömatik San. ve Tic. A*.Perpa Ticaret Merkezi B Blok Kat:11 No: 1625, TR-34386, Okmeydani, IstanbulPhone: +90 (0)212-444-0762, Fax: +90 (0)212-221-1519E-mail: smc@entek.com.trhttp://www.entek.com.trCzech RepublicSMC Industrial Automation CZ s.r.o.Hudcova 78a, CZ-61200 BrnoPhone: +420 5 414 24611, Fax: +420 5 412 18034E-mail: office@smc.czhttp://www.smc.czIrelandSMC Pneumatics (Ireland) Ltd.2002 Citywest Business Campus, Naas Road, Saggart, Co. DublinPhone: +353 (0)1-403 9000, Fax: +353 (0)1-464-0500E-mail: sales@smcpneumatics.iehttp://www.smcpneumatics.ie© DiskArtRomaniaUKSMC Romania srlSMC Pneumatics (UK) LtdStr Frunzei 29, Sector 2, BucharestVincent Avenue, Crownhill, Milton Keynes, MK8 0ANPhone: +40 213205111, Fax: +40 213261489 Phone: +44 (0)800 1382930 Fax: +44 (0)1908-555064E-mail: smcromania@smcromania.ro E-mail: sales@smcpneumatics.co.ukhttp://www.smcromania.rohttp://www.smcpneumatics.co.ukDenmarkSMC Pneumatik A/SKnudsminde 4B, DK-8300 OdderPhone: +45 70252900, Fax: +45 70252901E-mail: smc@smc-pneumatik.dkhttp://www.smcdk.comItalySMC Italia S.p.AVia Garibaldi 62, I-20061Carugate, (Milano)Phone: +39 (0)2-92711, Fax: +39 (0)2-9271365E-mail: mailbox@smcitalia.ithttp://www.smcitalia.itRussiaSMC Pneumatik LLC.4B Sverdlovskaja nab, St. Petersburg 195009Phone.:+7 812 718 5445, Fax:+7 812 718 5449E-mail: info@smc-pneumatik.ruhttp://www.smc-pneumatik.ruEstoniaSMC Pneumatics Estonia OÜLaki 12, 106 21 TallinnPhone: +372 6510370, Fax: +372 65110371E-mail: smc@smcpneumatics.eehttp://www.smcpneumatics.eeLatviaSMC Pneumatics Latvia SIASmerla 1-705, Riga LV-1006Phone: +371 781-77-00, Fax: +371 781-77-01E-mail: info@smclv.lvhttp://www.smclv.lvSlovakiaSMC Priemyselná Automatizáciá, s.r.o.Námestie Matina Benku 10, SK-81107 BratislavaPhone: +421 2 444 56725, Fax: +421 2 444 56028E-mail: office@smc.skhttp://www.smc.skFinlandSMC Pneumatics Finland OyPL72, Tiistinniityntie 4, SF-02231 ESPOOPhone: +358 207 513513, Fax: +358 207 513595E-mail: smcfi@smc.fihttp://www.smc.fiLithuaniaSMC Pneumatics Lietuva, UABOslo g.1, LT-04123 VilniusPhone: +370 5 264 81 26, Fax: +370 5 264 81 26SloveniaSMC industrijska Avtomatika d.o.o.Mirnska cesta 7, SLO-8210 TrebnjePhone: +386 7 3885412 Fax: +386 7 3885435E-mail: office@smc.sihttp://www.smc.siOTHER SUBSIDIARIES WORLDWIDE:ARGENTINA, AUSTRALIA, BOLIVIA, BRASIL, CANADA, CHILE,CHINA, HONG KONG, INDIA, INDONESIA, MALAYSIA, MEXICO,NEW ZEALAND, PHILIPPINES, SINGAPORE, SOUTH KOREA,TAIWAN, THAILAND, USA, VENEZUELAhttp://www.smc.euhttp://www.smcworld.comSMC CORPORATION Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPAN Phone: 03-5207-8249 FAX: 03-5298-53621st printing MO printing MO 00 Printed in SpainSpecifications are subject to change without prior noticeand any obligation on the part of the manufacturer.