RFLDH Welded Series HYDRAULIC AND LUBE OIL ... - HYDAC USA
RFLDH Welded Series HYDRAULIC AND LUBE OIL ... - HYDAC USA
RFLDH Welded Series HYDRAULIC AND LUBE OIL ... - HYDAC USA
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>RFLDH</strong> <strong>Welded</strong> <strong>Series</strong>Inline Duplex Filters – 150 psi • up to 700 gpm<strong>HYDRAULIC</strong> <strong>AND</strong> <strong>LUBE</strong> <strong>OIL</strong> FILTERSHydraulic SymbolAAFIFIBBFeatures• Models are available in carbon and stainless steel versions. Lidsare swing bolt mounted.• ANSI flange connections.• Inlet and outlet connections are located on the same sideof the transfer valve.• Transfer valve and pressure equalization line allow easychangeover between filter housings without costlysystem shutdown.• Clogging indicators have no external dynamic seal. Highreliability is acheived and magnetic actuation eliminatesa leak point.• Stainless drain piping with ball valves available.• Air bleed line available.• ASME coded with U-stamp available.ApplicationsAutomotivePulp & PaperGearboxesShipbuildingIndustrialSteel / HeavyIndustryPowerGenerationTechnical DetailsMounting MethodPort Connection1300/13032500/25031320/1323, 2520/25234020/4023Floor mounted legs(Filters must not be used as pipe support)2” ANSI 150# Flange3” ANSI 150# Flange4” ANSI 150# Flange6” ANSI 150# FlangeFlow Direction Inlet: Front top Outlet: Front BottomConstruction Materials1300, 1320, 2500, 2520, 4020 - Carbon Steel1303, 1323, 2503, 2523, 4023 - Stainless SteelFlow Capacity1300/13031320/13232500/25032520/25234020/4023Housing Pressure RatingMax. Operating PressureProof PressureFatigue PressureBurst PressureElement Collapse Pressure RatingBN/HC, W/HCFluid Temperature RangeFluid Compatability167 gpm (650 lpm)304 gpm (1150 lpm)270 gpm (1050 lpm)525 gpm (2000 lpm)700 gpm (2650 lpm)150 psi (10 bar) standard345 psi (24 bar)Contact <strong>HYDAC</strong> officeContact <strong>HYDAC</strong> office250 psid (17 bar)-22° to 250°F (-30° to 121°C)Compatible with all petroleum oils and synthetic fluids ratedfor use with Fluoroelastomer or Ethylene Propylene seals.Contact <strong>HYDAC</strong> for information on special housing and elementconstructions available for use with water glycols, oil/wateremulsions, and HWBF.Indicator Trip Pressure∆P = 29 psid (2 bar) -10%∆P = 72 psid (5 bar) -10%Bypass Valve Cracking Pressure∆P = 43 psid (3 bar) +10%∆P = 87 psid (6 bar) +10%
Change language