MeaptronTM - Vibration Management Corporation

Meaptron TMTropical Air-conditioning units(for hot and humid climate)Window Air ConditionersSplit Air CondionersPackaged Air ConditionersUSA ITALY THAILAND

ContentsSection Description Page Numbers1 Window Air conditioners 1(CW Series)2 Direct Discharge Split Air Conditioners 2(SPU,SPW,SUC,SPF&SPC Series)3 Ducted Split Air conditioners 3-6(SPD, SPA & SPC Series)4 Ducted High Static AHU 7-13(PHD & PFD Series)5 Top Discharge Condensing units 14-20(PC Series)6 Roof Top Packaged Air Conditioners 21-30(SR Series)UNIT CONVERSIONMetric Unit X = IP UnitX= SI UnitKg 2.205 lb 0.4536 kgm 3.281 ft 0.3048 mm 2 10.760 ft 2 0.0929 m 2m 3 35.310 ft/min 0.00508 m/sm/s 196.900 ft/min 0.00508 m/sm 3 /h 0.5886 ft3/min 0.4719 L/sm 3 /h 4.403 GPM 0.06309 L/skg/cm 2 14.22 psi 6.895 Kpamm.H 2 O 0.03973 in.H 2 O 249.1 Pam.H 2 O 3.281 ft.H 2 O 2.989 KpaKcal/h 3.968 btu/h 0.2931 wKw 1.341 HP 0.7457 KwMeaptron TM is an industry leader known for offering superior quality and reliableair conditioning products.Due to continuous efforts of our R & D Department toupgrade products, specifications are subject to change without prior notice.

Section IWindow Air conditionerCABINETEvery cabinet is made of rust and corrosion resistantgalvanized steel and Powder coated epoxy finish. Yourunit will last for years even in harsh weather.GROOVED COPPER TUBINGGrooved copper tubing helps maximize the efficiency ofthe cooling process by exposing more of the inner tubesurface to the refrigerant, thus increasing heat transfer.COMPRESSOREnergy efficient powerful inertia compressor is internallyoverload protected.CAPACITORIndividually connected capacitor for compressor and fanmotor.*Optional Model with remote control on request.Elegant Silent DurableSPECIFICATION MODEL CW09 CW12 CW18 CW24 CW28CAPACITY-COOLING BTU / HR 9000 12000 18200 24250 28000CAPACITY-ELE.HEATING (HE) K.W. 2 2 3 3 3CAPACITY-HEATING (HP) BTU / HR 10000 14000 20000 27000 30500POWER SUPPLY VOLTS / PH / HZ 220-240V/1 PH / 50 HZPOWER LOAD (COOLING) AMP 6.5 8.2 9.8 12 14.7AIR FLOW CFM 300 350 550 550 600MOISTURE REMOVAL LTR / HR 1.1 1.7 2.7 2.6 3.1FAN SPEED COOLING 3 STEPSHEATING2 STEPSREFRIGERANT FREON R-22DIMENSION (MM) HEIGHT 368 368 457 457 432WIDTH 520 520 673 673 698DEPTH 673 673 736 736 876WEIGHT KG 34 41 74 78 90ENGINEERING FEATURESVENTILATION CONTROLTo freshen the room by discharging stale room air, slidethe control to open. To circulate the air in the room, slideit to close.ONE-TOUCH AIR FILTERYou can slide the filter in and out without removing thefront grill, for quick easy cleaning.4-WAY AIR DEFLECTION SYSTEMThe adjustable louvers let you direct airflow bothhorizontally and vertically. You can cool the room evenlyor concentrate the cool air on the spot of your choice.CONDENSER COIL GUARDOne of the main feature in this unit is, the fully louveredcoil guard to protect condenser coil from dust and hailstorm.1

FLOOR / CEILING TYPEWALL TYPECASSETTE TYPECONDENSING UNITSection 2DIRECT DISCHARGE SPLIT AIR CONDITIONERSCOOLING KW 3.9 5.5 7.1 9.2 10.7 14.06 17.5CAPACITIES BUT/HR 12000 18000 24000 30000 36000 48000 60000HEATING KW 3.9 5.7 7.9 9.5 11.0 14.5 18.0CAPCITIES BTU/HR 13000 20000 28000 32000 38000 50000 63000MODEL SPU12C/H SPU18C/H SPU24C/H SPU30C/H SPU36C/H SPU48C/H SPU60C/HAIR LS 188 283 377 472 566 684 849FLOW CFM 400 600 800 1000 1200 1450 1800DIMENSION (HxWxD) 615 X 970 X 220 615 X 970 X 220 615 X 1150 X 220 615 X 1570 X 240 615 X 1570 X 240 615 X 1765 X 280 615 X 1765 X 280WEIGHT (Kg) 28.5 31 39 48 49 61 68L 1/4 3/8 3/8 3/8 3/8 1/2 1/2CONNECTION G 1/2 5/8 5/8 5/8 3/4 3/4 3/4D 7/8 7/8 7/8 7/8 7/8 7/8 7/8MODEL SPW12CH SPW18C/H SPW24C/H SPW30C/H SPW36C/HAIR L/S 142 260 283 390 500FLOW CFM 300 550 600 780 980DIMENSION (HxwxD) 298 X 880 X 179 330 X 1100 X 210 330 X 1100 X 210 333 X 1200 X 210 333 X 1200 X 210WEIGHT (Kg) 9.2 13.5 13.6 18.9 19.5l 1/4 3/8 3/8 3/89 3/8CONNECTION G 1/2 5/8 5/8 5/8 5/8D 5/8 5/8 5/8 5/8 5/8MODEL SUC18C/H SUC24C/H SUC36C/H SUC48C/HAIR FLOW L/S 265 283 430 470CFM 560 600 920 990DIMENSION (HxWxD) 290 X 840 X 840 290 X 840 X 840 340 X 840 X 840 340 X 840 X 840WEIGHT (Kg) 36 37 43 45L 3/8 3/8 43 1/2CONNECTION G 5/8 5/8 5/8 3/4D 11/8 11/8 11/5 11/8MODEL SPC12C/H SPC18C/H SPC24C/H SPC30C/H SPC36C/H SPC48C/H SPC60C/HCOOLING (AMP) 6.4 8.2 11.4 13.5 16.4 7.5 8.2POWER SUPPLY 220 V - 1 Phase - 50 Hz 380/440 - 3 Phase - 50HzDIMENSION (HxWxD) 540 X 832 X 320 600 X 832 X 320 600 X 832 X 320 700 X 978 X 387 700 X 978 X 387 1200 X 925 X 350 1200 X 925 X 350WEIGHT (Kg) 40 51 59 77 78 81 101L 1/4 3/8 3/8 3/8 3/8 3/8 1/2CONNECTIONG 1/2 5/8 5/8 5/8 3/4 3/4 3/4FREE STANDING TYPEMODEL SPF33C/H SPF48C/H SPF60C/H SPF72C/H SPF90C/H SPF120C/H SPF150C/HCOOLING 36000 48000 60000 72000 90000 120000 150000CAPCITIES BTU/HRAIR L/S 519 708 850 1133 1416 1700 1888FLOW CFM 1100 1500 1800 2400 3000 3600 4000DIMENSION (HxWxD) 1870 X 600 X 320 1870 X 600 X 320 1870 X 850 X 420 1870 X 850 X 420 1870 X 1090 X 420 1870 X 1090 X 420 1870 X 1090 X 420WEIGHT (Kg) 58 68 81 94 139 145 150L 3/8 1/2 1/4 5/8 5/8 5/8 5/8CONNECTION G 5/8 3/4 3/4 7/8 1 1/8 1 3/8 1 3/8D 3/4 3/4 3/4 3/4 3/4 3/4 3/4MATCHING SPC 36C/H SPC 48C/H SPC60C/H SPC72C/H SPC 90C/H SPC120C/H SPC 150C/HCONDENSING UNIT• Cooling capacity are based on outside temperature 35ºC DB and 27ºC WB, with 19ºC WB indoor temperature.• Heating capacity are based on outside temperature of 7ºC DB and 6ºC WB, with 21ºC DB indoor temperature.• Suffix ‘C’ at end of the model no denotes cooling only - ‘H’ denotes heat pump model.• 60Hz Machines are available upon request.• Electric supply for all indoor unit 220V 0 1 Phase - 50 Hz.• For cooling capacity at other design conditions refer page 5, section 3SPECIAL FEATURESCooling coil - Plate fin (Sine Wave) High performanceCondenser coil - Plate fin (Super Louver)Control - IC Micro-processor, Wire-less, 3 speed control (except for model SPF)Filter - Washable, Easily accessible2

Section 3DUCTED SPLIT AIR CONDITIONERSAIR HANDLING UNITFAN COIL UNITCONDENSING UNIT3

Section 3FAN COIL UNITCABINET: Model SPD design for horizontal concealed ceiling. Alsoavailable as option with plenum and aluminium filter.COILS: Standard 3 row cooling coils insuring high dehumidificationMOTORS: Motor is fitted with life-lubricated bearing and TAP winding giving 3speeds. It is a permanent split capacitor type.BLOWERS: Centrifugal blower direct driven double inlet statically and dynamicallybalanced with the motor.DRAIN PAN: Galvanized and double insulated inner and outer.AIR HANDING UNITCABINET: Powder coat painted. Only 18” high, ideally suited for concealed ceiling.MOTOR: Inherently protected direct driven motors are mounted inside of theinsulated cabinet to reduce motor noise.EXPANSION DEVICE: Flow control single circuit upto 5 ton and dual circuit for 71/2ton and 10 ton.EVAPORATOR COIL: Coils are constructed with copper tubes and aluminum finsmechanically bonded to the tubes for maximum heat transfer.FILTERS: One inch aluminium permanent washable filters are standard.CONDENSING UNITCABINET : Cabinet is constructed from powder painted galvanized steel.COMPRESSOR: Hermetically sealed with internal high temperature motor overloadprotection. It is internally spring mounted and externally mounted on rubbergrommet to reduce vibration and noise.CONDENSER COIL: Copper tube and plate aluminium fins are used on all models.SHUT OFF VALVE: Liquid and suction service valves are standard on all models.4

Section 3FAN COIL &AIR HANDLINGUNITMODEL SPD18C SPD24C SPD30C SPD36C SPA36C SPA48C SPA60C SPA60C SPA90C SPA120CAIR VOL. CFM 600 800 1000 1200 1200 1600 2000 2000 3000 4000ENT AIR TEMP. DB 75 80 85 75 80 85 75 80 85 75 80 85 75 80 85 75 80 85 75 80 85 75 80 85 75 80 85 75 80 85IN ºF WB 62 67 72 62 67 72 62 67 72 62 67 72 62 67 72 62 67 72 62 67 72 62 67 72 62 67 72 62 67 7295 AMB TMBH 16.1 18.2 19.7 22.4 24.2 26.7 26.4 29.1 32.1 33.2 36.1 39.4 33.2 36.1 39.4 42.0 46.0 50.0 47.6 51.8 55.2 56.8 61.5 64.9 84.0 92.0 100 95.2 103.6 110.4COOLING SMBH 12.6 13.7 14.4 17.5 18.4 19.7 21.5 22.4 23.1 28.4 30.3 31.6 28.4 30.3 31.6 32.5 36.0 37.5 37.2 40.1 41.0 47.1 50.2 51.4 60.2 70.4 71.2 74.4 80.2 82.0CAPACITY 115 AMB TMBH 13.8 15.8 17.1 18.1 19.8 21.7 23.6 25.8 27.9 28.4 31.7 33.8 28.4 31.7 33.8 37.3 41.2 42.8 41.0 45.2 47.1 49.2 54.3 56.2 75.3 80.4 83.2 82.0 90.4 94.2SMBH 11.7 12.3 12.9 14.8 15.8 16.7 18.8 20.1 21.2 24.9 24.2 27.9 24.9 27.2 27.9 29.6 31.8 33.6 33.3 35.6 38.3 39.9 43.2 45.1 58.4 63.0 66.2 66.6 71.2 76.6AREA IN 1.7 2.44 3.2 3.2 3.28 3.28 3.28 3.28 5.55 6.40SQ. FT.DX COIL NO. OF 3 3 3 3 3 4 4 4 4 4DATAROWSFINS PER 12 12 12 12 13 13 13 13 13 13INCHFAN NOS. 2 2 4 4 1 1 1 1 2 2BLOWER SIZE 6”X9” 6”X9” 6”X9” 6”X9” 10”X10” 11”X11” 11”X11” 11”X11” 11”X11” 11”X11”DATA MOTOR NOS. 1 1 2 2 1 1 1 1 2 2HP 1/15 1/10 1/15 1/15 1/3 1/2 3/4 3/4 3/4 3/4CONNECTION SUCTION 5/8” 5/8” 3/4” 3/4” 5/8” 3/4” 3/4” 3/4” 1 1/8” 1 1/8”SIZE LIQUID 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 5/8”DIMENSION HEIGHT 9 1/4 9 1/4 9 1/4 9 1/4 18 18 18 18 18 18(IN INCHES) DEPTH 16 1/2 16 1/2 16 1/2 16 1/2 25 1/2 25 1/2 25 1/2 25 1/2 25 1/2 25 1/2WIDTH 36 49 1/2 63 63 35 1/2 35 1/2 35 1/2 35 1/2 59 66WEIGHT (KG.) 35 46 46 56 57 57 58 58 90 95CONDENSINGUNITMODEL SPC 18C SPC24C SPC30C SPC36C SPC36C SPC48C SPC60C SPC72C 2XSPC48C 2XSPC60CCOMPRESSOR RLA 8.5 10.3 13.6 16.6 16.6 6.6 8.8 8.9 2X6.6 2X8.8LRA 47 60 72 82 82 45 62 67 2X45 2X62CONNECTION SUCTION 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 2/3X4 2X3/4SIZE LIQUID 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 2X1/2 2X1/2DIMENSION HEIGHT 24 24 29 1/2 29 1/2 29 1/2 29 1/2 29 1/2 50 29 1/2 29 1/2(IN INCHES) DEPTH 12 7/8 12 7/8 16 1/2 16 1/2 16 1/2 16 1/2 16 1/4 16 1/4 16 1/2 16 1/2WIDTH 33 1/2 33 1/2 39 1/2 39 1/2 39 1/2 39 1/2 39 1/2 39 1/2 39 1/2 40 1/2WEIGHT (KG.) 56 58 80 82 82 135 142 156 2X135 2X142Fan performance - CFMMODELMOTOREXTERNAL STATIC PRESSURE (IN WG)SPEED 0 0.1 0.2 0.3 0.4 0.5HIGH 600 540 370 - - -SPD 18C MEDIUM 560 500 350 - - -LOW 500 460 320 - - -HIGH 800 720 440 - - -SPD 24 MEDIUM 720 660 410 - - -LOW 680 610 390 - - -HIGH 1040 880 680 - - -SPD 30 MEDIUM 960 810 640 - - -LOW 860 780 610 - - -HIGH 1240 1040 900 - - -SPD 36 MEDIUM 1120 960 840 - - -LOW 1040 880 760 - - -HIGH 1380 1330 1250 1200 1130 1050SPA 36 MEDIUM 1230 1180 1110 1070 1000 940LOW 1075 1030 970 935 880 820HIGH 1950 1880 1760 1650 1590 1490SPA 48 MEDIUM 1730 1670 1570 1470 1410 1330LOW 1520 1460 1370 1290 1230 1170HIGH 2310 2010 1750 1660 1590 1500SPA 60 MEDIUM 2050 1780 1550 1480 1410 1330LOW 1790 1560 1360 1290 1230 1170HIGH 3360 3210 2920 2790 2670 2480SPA 90 MEDIUM 2990 2860 2600 2480 2370 2200LOW 2610 2500 2280 2175 2070 1930HIGH 4020 3650 3490 3330 3100 2830SPA 120 MEDIUM 3570 3250 3100 2970 2750 2520LOW 3130 2840 2720 2590 2410 2200Note: All SPD, SPA & SPC are single phase 208 / 220V / 50 Hz Except SPC 48, 60 & 72 are 3 phase / 380 / 440V / 50 Hz Contact factory for other electrical supplies.5

Section 3DIMENSIONFAN COIL UNITMODEL SPDWIDTHHEIGHTDEPTH18 36 91/4 161/224 491/2 91/4 161/230 63 91/4 161/236 63 91/4 161/2AIR HANDLING UNITMODEL SPAWIDTHHEIGHTDEPTH36 351/2 18 251/248 351/2 18 251/260 351/2 18 251/290 59 18 251/2120 66 18 251/2CONDENSING UNITMODELWIDTHHEIGHTDEPTHSPC18 331/2 24 127/8SPC24 331/2 24 127/8SPC30 391/2 391/2 161/2SPC36 391/2 291/2 161/2SPC48 391/2 291/2 161/2SPC60 391/2 291/2 161/4SPC72 391/2 50 161/46

Section 4DUCTED EVAPORATOR BLOWER UNITMODEL PFD, PHDAIR VOLUME RANGE : 1600 TO 26400 CFMCOOLING CAPACITY RANGE : 62.1 TO 810.4 MBH7

Section 4FEATURESMODEL 05-01 TO 30-01CABINET: Cabinets are constructed of heavily zinc coatedgalvanized steel, chemically cleaned and phosphatized to bondthe specially formulated corrosion inhibiting, polyester powdercoating.EVAPORATOR: Evaporator coil are formed of seamless smoothsurface or inner grooved copper tubing with mechanically bondedaluminum alloy plate fin slit type.BLOWER AND MOTOR: Belt driven steel blowers are forwardcurved, double inlet multi blade centrifugal type and are staticallyand dynamically balanced for quite operation. Belt driven unit (05-01 to 30-01), blowers are mounted on steel rigid shaft in heavyduty pillow block ball bearings and driven to desired air flow ratedand static pressure by set of V-belt and variable pitch diameterpulleys. Blower motor is internally mounted, equipped withpermanently lubricated bearing and internal overload.STANDARD COMPONENTS• Air filters• Motor with a set of variable pitch diameter pulleys.• Thermostatic expansion valve.OPTIONAL COMPONENTS• Chilled water coil.• Hot water or steam coil.• Electronic remoted control unit.AIR FILTER: Air filters are permanent and cleanable type.OTHERS: The entire unit is thermally and acoustically insulated.PERFORMANCE DATAUNITMODELPFD, PHDAIR FLOWCFMEVAP. TEMP.ºFTOTALMBH62SENSIBLEMBHAIR TEMPERATURE ENTERING EVAPORATOR ºFWB67 72TOTALMBHSENSIBLEMBHTOTALMBHSENSIBLEMBH05-0109-0112-0120-0125-0130-012,0003,0004,4006,0008,00010,00035 71.2 59.1 88.6 54.3 109.0 49.540 57.5 53.2 75.7 49.0 95.4 44.345 44.7 44.7 62.1 43.7 81.8 39.450 31.0 31.0 49.2 39.0 67.4 34.435 110.6 90.1 137.7 83.1 169.5 76.540 89.5 80.8 117.7 74.9 148.3 68.345 69.4 69.4 96.5 66.6 127.1 60.550 48.3 48.3 76.5 59.2 104.8 52.735 175.7 137.4 218.7 128.2 269.2 120.040 142.10 121.9 186.9 114.8 235.5 106.545 108.4 107.7 153.2 101.1 201.9 93.750 76.6 76.6 121.6 89.3 166.4 81.135 201.2 168.3 250.4 154.1 308.2 139.840 162.0 151.8 214.0 139.5 269.6 125.345 124.1 124.1 175.5 124.7 231.0 111.650 87.7 87.7 139.10 111.5 190.5 97.635 286.6 232.5 359.9 216.5 445.3 199.740 231.8 209.1 304.9 193.7 387.3 177.745 176.9 176.9 250.0 172.5 329.3 156.650 125.1 125.1 198.0 153.2 271.3 136.435 309.1 266.5 386.2 243.6 308.1 199.340 262.4 247.0 340.2 225.5 262.0 180.245 231.7 231.7 285.9 502.1 208.8 158.750 191.1 197.9 230.0 184.6 151.5 136.1AT 80ºFDB ENTERING AIR TEMPERATUREAIR FLOW CORRECTIONAIRFLOW CFM 80% 90% 100% 110% 120%Total capacity 0.97 0.985 1.00 1.015 1.03Sensible heat 0.90 0.95 1.00 1.048 1.108

Section 4SPECIFICATIONSUNIT MODEL PFD,PHD 05-01 09-01 12-01 20-01 25-01 30-01NOMINAL AIR FLOW RATE CFM 2,000 3,000 4,400 6,000 8,000 10,000L/S 944 1,416 2,076 2,831 3,775 4,719AIR FLOW RATE RANGE CFM 1,600-2,400 2,400-3, 600 3,520-5, 280 4,800-7,200 6,400-9,600 8,000-12,000LS 755-1, 133 1,133-1,699 1,661-2,492 2,265-3,398 3,020-4,530 3,775-5,663NOMINAL COOLING CAPACITY MBH 62.1 96.5 153.2 175.5 250.0 285.9AT 67ºFWB EAT/45ºF SST KW 18.2 28.28 44.9 51.43 73.27 83.79POWER SOURCE V/PH/Hz 380/3/50NUMBER OF CIRCUIT 1 1 1 1 OR 2 2 2CONNECTIONSSUCTION-QUANTITY..ODF. INCH 7/8 1-1/8 1-3/8 1-3/8 OR 2...1-3/8 2..1-5/8 2..1-5/8LIQUID-QUANTITY..ODF. INCH 1/2 5/8 5/8 7/8 OR 2..7/8 2..3/4 2...3/4DRAIN. INCH 1 MPTUNIT DIMENSION(mm.) A 930/930 1,350/1,350 1,480/1,480 1,480/1,480 1,960/1,960 2,100/2,100PFD/PHD B 535/500 535/500 660/600 760/700 760/700 820/760C 1,100/1,155 1,100/1,155 1,100/1,180 1,300/1,380 1,300/1,380 1,400/1,480UNIT OPERATING WEIGHT KGS 95 140 180 220 250 530EVAPORATOR COILTYPEPLATE FIN (SLIT TYPE) BONDED WITH PLAIN OR INNER GROOVE COPPER TUBESFACE AREA FT 2 4.7 7.0 9.1 11.8 16.5 20.0NO. OF ROWS 3 3 3 3 3 3NO. OF FIN PER INCH 12 14 14 14 14 14EVAPORATOR FANTYPEDOUBLE INLET MULTI BLADE CENTRIFUGAL (DWDI)QUANTITY 1 2 2 2 2 2DIAMETER/WIDTH INCH 10/10 10/10 12/12 15/11 15/15 15/15DRIVEN METHODBELTMAXIMUM EXT. STATIC INCH-H2O 1.0 1.0 1.0 2.0 2.0 2..0EVAPORATOR MOTORTYPETOTALLY ENCLOSED FAN COOLED INDUCTION MOTORQUANTITY 1 1 1 1 1 1POWER OUTPUT HP. 1 1 2 3 5 7.5RPM 1,500 1,500 1,500 1,500 1,500 1,500FULL LOAD AMP. Amp. 1.8 1.8 3.5 4.9 8.0 11.5AIR FILTERTYPEPERMANENT AND WASHABLE ALUMINIUMQUANTITY(PFD,PHD) 2/2 2/2 2/2 4/2 4/3 6/3THICKNESS INCH 1 1 2 2 2 2SIZE (inch) PFD 25X14-3/8 25X21-3/4 25X24-1/2 16-1/4X24-1/2 16-1/4X33-7/8 18-3/4X24-3/4PHD 15-3/4X15-3/8 15-3/4X23-7/8 19-3/4X26-3/8 23-5/8X26-3/8 23-5/8X23-7/8 26X24-3/4TYPE OF REFRIGERANT R-22STANDARD COMPONENTREFRIGERANTHOLDING BY NITROGEN FROM FACTORYMETERING DEVICESFAN PULLEYMOTOR PULLEYOPTIONAL COMPONENTTHERMOSTATIC EXPANSION VALVEFIXED PITCH DIAMETERVARIABLE PITCH DIAMETERMOTOR CONTACTOR, ROOM THERMOSTAT AND CHILLED WATER COIL.1) SUCTION CONN.2) LIQUID CONN.3) MPT DRAIN CONN.4) LECTRICAL CONN.9

Section 4BLOWER PERFORMANCE* Evaporator blower unit model 05-01-to 30-01 are possible to adjust RPM of blower to suit the external static pressure. Variable pitch motor pulley is provided for field adjustment.UNITMODELPFD, PHDAIR FLOWCFMEXTERNAL STATIC PRESSURE INCH WG0.204 06 0.8 1.0 1.5 2.0RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP1,600 656 0.28 716 0.32 803 0.40 881 0.53 953 0.6705-01 2,000 689 0.37 735 0.43 822 0.50 915 0.65 1.007 0.802,400 695 0.50 760 0.60 832 0.70 994 0.80 1,056 0.902,400 520 0.24 701 0.40 778 0.52 980 0.67 1,096 0.8309-01 3,000 543 0.42 730 0.58 801 0.68 987 1.13 1,097 1.353,600 634 0.59 755 0.75 822 0.85 996 1.25 1,104 1.583,520 640 0.64 720 0.76 800 0.92 875 1.12 960 1.3012-01 4,400 735 1.00 800 1.18 870 1.36 935 1.56 1,005 1.765,280 845 1.58 905 1.80 965 2.02 1,020 2.22 1,080 2.444,800 495 0.82 565 1.04 640 1.24 710 1.46 780 1.94 913 3.10 1,034 4.5120-01 6,000 515 1.44 650 1.64 715 1.86 770 2.16 825 2.46 948 3.74 1,058 5.197,200 695 2.30 740 2.62 790 2.94 840 3.24 885 3.54 990 4.95 1,082 6.476,400 472 0.75 523 1.03 570 1.33 613 1.51 665 1.72 725 2.00 785 2.2625-01 8,000 619 1.78 625 1.83 668 2.23 708 2.44 740 2.68 795 2.96 845 3.269,600 690 2.66 724 3.07 758 3.52 790 3.75 830 4.02 875 4.44 920 4.88,000 656 2.1 713 2.4 771 2.7 900 3.7 1,027 5.030-01 10,000 701 3.0 754 3.3 807 3.6 927 4.5 1,035 5.612,000 802 5.2 847 5.5 892 5.9 995 6.8 1,093 7.9* The driving accessories which are provided from factory are as per table below:UNITMODELPFD, PHDDIASIZEWIDTHBLOWER WHEELSHAFTDIAQUANTITYPULLEYP.D.MOTORINCH INCH INCH INCHHP. KW.mm. INCH05-01 10 10 1-3/16 1 7.9 80M 1 0.75 1,500 19 3.7-4.709-01 10 10 1-3/16 2 7.9 80M 1 0.75 1,500 19 4.3-5.312-01 12 12 1-3/16 2 9.9 90L 2 1.50 1,500 24 4.9-5.920-01 15 11 1-3/16 2 9.9 100L 3 2.25 1,500 28 4.3-5.325-01 15 15 1-3/16 2 12.4 112M 5 3.75 1,500 28 4.9-5.930-01 15 15 1-3/16 2 12.4 132S 7.5 5.50 1,500 38 4.9-5.9OUT DOORUNITMODELFRAMENO.OUTPUTRECOMMENDED MATCHING CAPACITY at 80ºFDB / 67ºFWB ENTERING AIR TEMPERATURE and 95ºF AMBIENT TEMPERATUREINDOORUNITMODLESINGLE HERMETIC COMPRESSORAIR FLOWRATECFMCAPACITYMBH1,600 57.5HJJ 56Z PFD, PHD 05-01 2,000 58.02,400 58.51,600 62.2HJJ 60Z PFD, PHD 05-01 2,000 62.82,400 63.31,600 57.7PC 05Z PFD, PHD 05-01 2,000 58.22,400 58.71,600 60.3PC 06Z PFD, PHD 05-01 2,000 60.92,400 61.52,400 92.4PC 09 PFD, PHD 09-01 3,000 93.33,600 94.22,400 100.5PC 10 PFD, PHD 09-01 3,000 101.53,600 102.53,520 143.3PC 12 PFD,PHD 12-01 4,400 144.65,280 145.93,520 150.9PC 15Z PFD, PHD 12-01 4,400 152.25,280 153.64.800 156.9PC 15Z PFD,PHD 20-01 6,000 158.37,200 160.0SPECIFICATOIN ARE SUBJECT TO CHANGE WITHOUT NOTICEOUT DOORUNITMODELRPMINDOORUNITMODLESHAFTDIAAIR FLOWRATECFMPULLEYPDRCAPACITYMBHDUAL HERMETIC COMPRESSOR4,800 180.2PC 20D PFD, PHD 20-01 6,000 182.07,200 183.76,400 238.7PC 25D PFD, PHD 25-01 8,000 240.99,600 243.08,000 248.7PC 25D PFD, PHD 30-01 10,000 250.912,000 253.08,000 293.1PC 30Z PFD, PHD 30-01 10,000 296.112,000 298.9SEMI-HERMETIC COMPRESSOR3,520 152.6PC 15-01 PFD, PHD 12-01 4,400 153.85,280 155.14,800 158.4PC 15-01 PFD, PHD 20-01 6,000 159.77,200 160.94,800 180.4PC 20-01 PFD, PHD 20-01 6,000 182.17,200 183.76,400 238.9PC 25-01 PFD, PHD 25-01 8,000 241.49,600 243.78,000 250.2PC 25-01 PFD, PHD 30-01 10,000 252.612,000 255.08,000 274.1PC 30-02 PFD, PHD 30-01 10,000 276.512,000 278.710

Section 4FEATURESMODEL 35-01 TO 80-01CABINET: Cabinets are constructed of heavily zinc coatedgalvanized steel, chemically cleaned and phosphatized to bondthe specially formulated corrosion inhibiting, polyester powdercoating.• Air filters• MotorSTANDARD COMPONENTSEVAPORATOR: Evaporator coil are formed of seamless smoothsurface or inner grooved copper tubing with mechanically bondedaluminum alloy plate fin slit type.BLOWER AND MOTOR: Belt driven steel blowers are forwardcurved, double inlet multi blade centrifugal type and are staticallyand dynamically balanced for quite operation. Blowers aremounted on steel rigid shaft in heavy duty pillow block ballbearings and driven to desired air flow rated and static pressure byset of V-belt and variable pitch diameter pulleys. Blower motor isinternally or externally mounted and equipped with permanentlylubricated bearing and internal over-load.OPTIONAL COMPONENTS• Thermostatic expansion valve.• Chilled water coil.• Hot water or steam coil.• Electronic remoted control unit.• Motor contactor• Horizontal discharge unitAIR FILTER: Air filters are permanent and cleanable type.OTHERS: The entire unit is thermally and acoustically insulated.PERFORMANCE DATAUNITMODELPFDAIR FLOWCFM(CR)EVAP. TEMP.FTOTALMBH62SENSIBLEMBHAIR TEMPERATURE ENTERING EVAPORATOR ºFWB67 72TOTALMBHSENSIBLEMBHTOTALMBHSENSIBLEMBH35-0140-0150-0160-0170-0180-0112 000(0.237)14 000(0.238)16 000(0.238)18 000(0.147)20 000(0.147)22 000(0.105)35 393.2 327.0 528.6 314.1 641.4 284.140 322.1 297.2 439.8 278.9 554.8 251.945 251.1 251.1 351.0 245.2 468.0 221.750 179.8 179.8 262.2 213.7 381.3 192.235 437.5 372.2 588.2 355.0 711.8 317.540 358.4 340.0 489.1 315.6 615.9 282.745 279.3 279.3 390.0 278.3 520.0 249.450 200.2 200.2 290.9 243.5 424.1 217.735 589.4 464.6 764.4 443.3 1003.1 437.140 482.4 418.5 648.6 395.8 854.1 378.445 375.5 375.3 532.8 350.9 705.0 323.150 268.6 268.6 417.0 308.0 556.0 272.135 658.9 552.2 852.4 518.8 1074.7 484.540 540.1 500.7 723.7 466.3 933.9 430.145 421.3 421.3 595.0 416.4 793.1 377.650 302.5 302.5 466.3 369.1 652.3 329.035 775.5 633.0 995.3 596.6 1222.6 549.240 635.8 571.4 845.4 534.8 1071.0 489.845 496.1 496.1 696.5 475.6 919.4 433.650 356.4 356.4 545.6 421.0 767.8 380.735 899.8 735.6 1150.6 693.4 1409.3 639.440 738.5 664.3 975.8 619.8 1236.9 569.345 577.2 577.2 810.4 553.7 1064.5 480.750 415.8 415.8 640.5 489.3 892.1 433.4CR: Sensible correctionNOTE:- Sensible capacity is based on 80 F DB entering evaporator air temperature. Above 80 F Db. Add ▲ SHC to SENSIBLE and below 80 F DB subtract ▲ SHC fromSENSIBLE. ▲ SHC can be calculated from.▲ SHC =1.1 (1-CR) (DB-80) CFM1 000= MBHAIR FLOW CORRECTION MULTIPLIERAIRFLOW CFM 80% 90% 100% 110% 120%Total capacity 0.97 0.985 1.00 1.015 1.03Sensible heat 0.90 0.95 1.00 1.048 1.1011

Section 4SPECIFICATIONS:EVAPORATOR BLOWER UNITUNIT MODEL PFD 35.01 40.01 50.01 60.01 70.01 80.01NOMINAL AIR FLOW CFM 12,000 14,000 16,000 18,000 20,000 22,000L/S 5,660 6,610 7,550 8,495 9,440 10.380AIR FLOW RATE RANGE MIN 9,600 11,200 12,800 14,400 16,000 17,600MAX 14,400 17,200 19,200 21,600 24,000 26,400NOMINAL COOLING CAPACITY MBH 351.0 390.0 532.8 595.0 696.5 810.4AT 67º FWB EAT/45º SST KW 102.9 114.3 156.2 174.4 204.1 237.5POWER SOURCE V/PH/Hz 380 / 3 /50NUMBER OF CIRCUIT 2 2 2 2 2 2CONNECTIONSSUCTION-QUANTITY...ODS INCH 2...1 3/ 8 2...1 5/ 8 2...1 5/ 8 2...2 1/ 4LIQUID-QUANTITY...ODS. INCH 2...17/8 2...7/8 4....7/8 4...7/8DRAIN. INCH 1 MPT -UNIT DIMENSION (mm.) A 2970 2970 3100 3370 3630 3630B 1055 1055 940 1245 1315 1390C 2180 2330 2535 2860 3070 3275UNIT OPERATING WEIGHT KGS/LBS 832/1830 882/1940 1068/2350 1100/2420 1150/2530 1227/2700EVAPORATOR COILTYPEPLATE FIN (SLIT TYPE) BONDED WITH PLAIN OR INNER GROOVE COPPER TUBESFACE AREA ft 2 /m 2 24/2.22 28.1/2.61 32/2.97 36.1/3.35 40/3.72 44/4.09NO. OF ROWS 3 3 3 4 4 4NO. OF FIN PER INCH/METRE 12/472 12/472 12/472 12/472 12/472 14/551EVAPORATOR FANTYPEDOUBLE INLET MULTI BLADE CENTRIFUGAL (DWDI)QUANTITY 2 2 2 2 2 2DIAMETER/WIDTH INCH 18/18 18/18 /18/18 18/18 22/22 25/25DRIVEN METHODBELTEVAPORATOR MOTORTYPETOTALLY ENCLOSED FAN COOLED INDUCTION MOTORPOWER SOURCE V/PH/Hz 220-380/3/50QUANTITY 1 1 1 1 1 1POWER OUTPUT HP/KW 7.5/5.5 10.0/7.5 10.0/7.5 10.0/7.5 15.0/11.2 15.011.2RPM 1440FULL LOAD AMP. A 12.0 16.0 16.0 16.0 25.4 25.4AIR FILTERTYPEPERMANENT AND WASHABLE ALUMINIUMQUANTITY / THICKNESS INCH 8/2 8/2 10/2 10/2 10/2 10/2SIZE (inch) 18x26.5 21x26.5 20x24 24x25 23x28 23x28TYPE OF REFRIGERANT R-22STANDARD COMPONENTREFRIGERANTHOLDING BY NITROGEN FROM FACTORY (NOT R-22)METERING DEVICESTHERMOSTATIC EXPANSION VALVE AS OPTIONAL PARTFAN PULLEYFIXED PITCH DIAMETERMOTOR PULLEYMOTOR CONTACTORROOM THERMOSTATELECTRONIC THERMOSTATVARIBLE PITCH DIAMETEROPTIONAL PARTSOPTIONAL PARTSAVAILABLE ON OPTIONAL REQUESTCHILLED WATER COILAVAILABLE ON OPTIONAL REQUESTSHIPPING DIMENSION (mm.) A 3070 3070 3250 3520 3780 3780B 1155 1155 1090 1395 1465 1540C 2330 2480 2735 3060 3270 3475SHIPPING WEIGHT Kgs/Lbs 892/1962 947/2083 1145/2515 1185/2607 1240/2728 1320/2904PFD 35-01 TO PFD 80-0112

Section 4BLOWER PERFORMANCE* Evaporator blower unit model 35-01 to 80-01 are possible to adjust RPM of blower to suit the extemal static pressure. Variable pitch motor pulley is provided for field adjustment.Blower data is inclusive of standard air filters pressure drop.UNITMODELPFDAIR FLOWCFMEXTERNAL STATIC PRESSURE INCH WG0.51.0 1.5 2.0 2.5RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP9,600 500 1.9 639 2.9 777 4.7 877 6.235-01 12,000 560 3.6 680 4.7 785 5.9 901 7.514,400 605 4.8 724 6.1 825 7.3 911 8.811,200 532 2.6 663 3.7 780 5.0 899 7.3 970 9.140-01 14,000 600 4.5 715 5.8 817 7.0 900 8.2 980 9.517,200 681 8.1 785 9.4 876 10.5 960 12.0 1035 13.212,800 567 3.6 692 4.7 795 5.9 901 7.7 1005 10.450-01 16,000 644 6.3 757 7.7 855 9.1 940 10.5 1018 12.119,200 729 10.1 828 11.8 917 13.4 1001 15.1 1076 16.814,400 532 4.5 642 5.8 750 7.5 856 9.7 959 13.060-01 18,000 596 7.1 690 9.0 782 10.5 875 12.0 962 14.621,600 666 10.6 747 12.4 828 14.2 905 16.1 982 18.216,000 486 4.7 585 6.5 680 8.7 774 11.3 861 14.270-01 20,000 562 8.4 649 10.7 729 13.0 804 15.6 878 18.624,000 618 11.9 703 14.6 770 17.0 838 19.8 905 22.817,600 369 3.9 476 6.4 572 9.1 647 11.6 716 14.380-01 22,000 406 6.0 495 8.6 584 11.8 664 15.1 734 18.326,400 447 8.9 526 11.6 602 15.0 676 18.8 745 22.5* The driving accessories which are provided from factory are as per table below:UNITMODELPFDDIASIZEWIDTHBLOWER WHEELSHAFTDIAQTY.PULLEYP.D.FAN SPEEDRANGEMOTORINCH INCH MM INCHHP. KW.mm. INCH35-01 18 18 45.00 2 12.4 569-685 132S 7.5 5.5 1440 38 4.9-5.940.01 18 18 45.00 2 12.4 573-689 132M 10 7.5 1450 38 4.9-5.950-01 18 18 45.00 2 12.4 573-689 132M 10 7.5 1450 38 4.9-5.960-01 18 18 45.00 2 12.4 573-689 132M 10 7.5 1450 38 4.9-5.970-01 22 22 45.00 2 15.4 458-552 160M 15 11 1440 42 4.9-5.980-01 25 25 45.00 2 15.4 458-552 160M 15 11 1440 42 4.9-5.9FRAMENO.OUT PUTRPMSHAFTDIAPULLEYPDRRECOMMENDED MATCHING CAPACITY at 80ºFDB / 67ºFWB ENTERING AIR TEMPERATURE and 95ºF AMBIENT TEMPERATUREINDOOR UNITMODELOUTDOOR UNITMODELMBHCAPACITYKWAIR FLOW RATEPC30-01 291.2 85.3PFD35-01 PC35-01 350.0 102.6 12,000 5,660PC40-01 377.7 110.7PC35-01 360.0 105.5PFD40-01 PC40-01 390.0 114.3 14,00 6,610PC50-01 440.5 129.1PC50-01 486.2 142.5PFD50-01 PC60-01 548.2 160.7 16,000 7,550PFD60-01 PC60-01 564.1 165.3 18,000 8,500PC70-01 698.9 204.8PFD70-01 PC80-01 746.9 218.9 20,000 9,440PC70-01 730.8 214.2PFD 80-01 PC80-01 783.6 229.7 22,000 10,380CFML/SSPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE13

Section 5AIR - COOLED CONDENSING UNITSMODEL PC 05Z TO PC 80-01NOMINAL COOLING CAPACITY RANGE 56.6 TO 772 MBH14

Section 5FEATURESMODEL PC 05Z TO PC 30-02CABINET: Cabinets are constructed of heavily zinc coatedgalvanized steel. Chemically cleaned and phosphatized to bondthe specially cleaned and phosphatized to bond the speciallyformulated corrosion inhibiting, polyester powder coating.permanently lubricated ball bearing and internal thermal protector.HIGH PRESSURE SWITCH: Protects compressor from excessivecondensing pressure.COMPRESSOR: Single or Dual hermetic compressors and semihermeticcompressors are applied together with internalcompressor motor protection.LOW PRESSURE SWITCH: Protects compressor from excessiveevaporating pressure.CONDENSER COIL: Condenser coils are formed of seamlesssmooth surface or inner grooved copper tubing with mechanicallybonded aluminum alloy plate fin slit type.CONDENSER FAN MOTOR: Permanent split capacitor motor withSTANDARD EQUIPMENTPC 05Z TO PC 30Z PC 15-01 TO PC 30-02- HERMETIC COMPRESSOR - SEMI-HERMETIC COMPRESSOR- CRANKCASE HEATER - SOLID STATE COMPRESSOR MOTOR PROTECTION- INTERNAL COMPRESSOR MOTOR PROTECTION - CRANKCASE HEATER- PSC MOTOR WITH THERMAL PROTECTION - INTERNAL COMPRESSOR MOTOR PROTECTION- MAGNETIC CONTACTOR - PSC MOTOR WITH THERMAL PROTECTION- HIGH PRESSURE CONTROL SWITCH - MAGNETIC CONTACTOR- LOW PRESSURE CONTROL SWITCH - OIL PRESSURE CONTROL SWITCH- TIME DELAY RELAY - HIGH PRESSURE CONTROL SWITCH- 24 V. OR 220V. CONTROL CIRCUIT (PC 05Z TO PC 20D) - LOW PRESSURE CONTROL SWITCH- 24 V. CONTROL CIRCUIT (PC 25D TO PC 30Z) - TIME DELAY RELAY- DISCHARGE VALVE- SUCTION VALVE- LIQUID VALVE- 24 V. OR 220 V. CONTROL CIRCUIT (PC 15-01 TO PC 20-01)- 24 V. CONTROL CIRCUIT (PC 25-01 TO PC 30-02)OPTIONAL EQUIPMENTPC 05Z TO PC 30Z PC 15-01 TO PC 30-02- DISCHARGE VALVE - UNDER OVER VOLTAGE PROTECTION- SUCTION VALVE - COPPER FINS- LIQUID VALVE - UNLOAD- UNDER OVER VOLTAGE PROTECTION- COPPER FINSPCO5Z-PC12PC15Z-PC25DPC15-01 - PC25-01PC30ZPC30-0215

SPECIFICATIONS:Section 5UNIT MODEL PC 05Z 06Z 09 10 12 15Z 20D 25D 30Z 15-01 20-01 25-01 30-02NOMINAL COOLING CAPACITY MBH 56.6 60.4 91.8 104.0 141.0 151.8 185.0 237.0 300.9 154.0 185.0 237.0 272.9AT 95ºF AMBT/45ºF SST KW 16.59 17.7 26.91 30.48 41.32 44.49 54.22 69.46 88.19 45.13 54.22 69.46 79.98POWER SOURCE V/PH/Hz 380-420/3/50CONNECTIONSSUCTION-QUANTITY...ODS INCH 7/8 1-1/8 1-3/8 1-5/8 2..1-1/8 2..1-3/8 2..1-5/8 1-3/8 1-5/8 2..1-5/8LIQUID QUANTITY...ODS OMCH 5/8 5/8 5/8 7/8 2...5/8 2...5/8 2...7/8 5/8 7/8 2...7/8UNIT DIMENSION (mm)A DEPTH 740 810 950 1,130 1,130 1,130 1,130B WIDTH 1,060 1,140 1,300 2,440 3,302 2,440 3,302C HEIGHT 791 975 985 888 888 888 888UNIT OPERATIONS WEIGHT KGS 165 168 232 234 243 273 431 460 540 327 354 500 540COMPRESSIONSTYPE HERMETIC SEMI-HERMETICPOWER SOURCE V/PH/Hz 380-420/3/50MOTOR HP/QUANTITY 5.75/1 6/1 9/1 10/1 12/1 15/1 10/2 12/2 15/2 15/1 20/1 25/1 30/1RATED LOAD AMPS EACH Amp 8.6 9.1 15.4 17.3 22.2 23.6 17.3 22.2 23.6 29.8 32.3 45.0 59.0LOCKED ROTOR AMPS EACH Amp 74.0 74.0 96.5 104.0 135.0 198.0 104.0 135.0 198.0 144.0 135.0 165.0 200.0CONDENSER COILTYPEPLATE FIN (SLIT TYPE) BONDED WITH PLAIN OR INNER GROOVE COPPER TUBESNUMBER OF CIRCUIT 1 1 1 1 1 1 2 2 2 1 1 1 2FACE AREA FT 2 14.1 14.0 14.2 14.2 15.6 23.3 23.3 23.3 35.5 23.3 23.3 23.3 35.5NO. OF ROWS 1 2 3 3 3 2 3 3 3 2 3 3 3NO. OF FIN PER INCH 14 14 12 12 12 12 14 14 14 12 14 14 14CONDENSER FANTYPEPROPELLERQUANTITY 1 1 1 1 1 2 2 2 3 2 2 2 3DIAMETER INCH 24 24 24 24 28 26 26 26 26 26 26 26 26DRIVEN METHODDIRECTAIR FLOW CFM 4,500 4,500 5,000 5,000 7,000 9,600 9,600 12,000 16,000 9,600 9,600 12,000 16,000CONDENSER FAN MOTORTYPEPERMANENT SPLIT CAPACITORPOWER SOURCE V/PH/Hz 220/1/50QUANTITY 1 1 1 1 1 2 2 2 3 2 2 2 3POWER OUTPUT H.P. 1/3 1/3 1/3 1/3 3/4 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4RPM 900 900 900 900 938 907 907 938 938 907 907 938 938FULL LOAD AMPS EACH Amp 1.97 1.97 1.97 1.97 3.20 3.17 3.17 3.20 3.20 3.17 3.17 3.20 3.20TYPE PF REFRIGERANT R-22STANDARD COMPONENTSREFRIGERANT HOLDING CHARGE BY R-22FILTER DRIERFIELD SUPPLYSIGHT GLASSFIELD SUPPLYACCESSORIESMAGNETIC CONTRACTOR, TIME DELAY RELAY AND CRANKCASE HEATERSAFETY DEVICESINTERNAL COMPRESSOR AND FAN MOTOR PROTECTIONHIGH AND LOW PRESSURE CONTROL SWITCHOPTIONAL COMPONENTSUNDER OVER VOLTAGE PROTECTION AND COPPER FINS16

Section 5PERFORMANCE DATAUNITMODELPC 05ZPC 06ZPC 09PC 10PC 12PC 15ZPC 20DPC 25DPC 30ZPC 15-01PC 20-01PC 25-01PC 30-02SATURATEDSUCTION TEMP.ºFAIR TEMPERATURE ENTERING CONDENSER ºF85 95 105 115MBH KW MBH KW MBH KW MBH KW35 50.2 4.4 47.1 4.9 44.0 5.5 40.6 6.040 54.9 4.5 51.5 5.1 48.1 5.6 44.7 6.245 60.4 4.7 56.6 5.2 53.2 5.8 49.5 6.350 65.5 4.9 61.8 5.5 58.0 6.0 54.3 6.535 53.6 4.3 50.5 4.7 47.4 5.3 44.0 5.940 58.7 4.4 55.3 4.9 51.9 5.4 51.5 6.045 64.1 4.5 60.4 5.0 56.6 5.5 52.9 6.150 69.9 4.6 66.2 5.1 62.1 5.7 58.0 6.235 81.7 8.0 73.9 8.3 66.8 8.5 59.7 8.740 90.3 8.5 82.5 8.9 74.7 9.1 67.2 9.445 100.4 9.1 91.8 9.4 83.6 9.8 75.0 10.150 110.5 9.6 101.2 10.0 92.2 10.4 83.2 10.935 92.7 9.3 83.4 9.7 76.3 9.9 68.1 10.240 102.8 9.9 93.5 10.3 84.9 10.6 76.3 10.945 113.7 10.6 104.0 11.0 94.6 11.4 85.3 11.850 125.3 11.2 114.8 11.7 104.7 12.2 94.2 12.735 126.0 12.9 115.8 13.4 106.1 13.9 96.3 14.440 138.6 13.6 128.0 14.3 117.4 14.8 106.9 15.445 152.4 14.4 141.0 15.1 130.0 15.8 118.2 16.450 167.0 15.3 154.4 16.1 142.6 16.8 130.0 17.635 134.4 11.3 126.9 12.6 119.1 14.0 110.9 15.540 147.10 11.6 138.9 12.9 130.3 14.4 121.8 15.845 160.7 11.9 151.8 13.3 143.0 14.6 133.8 16.050 175.4 12.2 165.5 13.6 155.9 15.0 146.0 16.435 165.4 17.5 150.2 18.1 135.8 18.5 120.9 19.040 183.3 18.8 167.10 19.3 150.9 19.9 135.1 20.545 202.6 20.1 185.0 20.8 167.8 21.5 150.6 22.250 222.6 21.5 203.6 22.3 185.0 23.2 166.1 24.035 213.0 22.9 195.6 23.8 179.3 24.6 162.7 25.440 233.8 24.3 215.8 25.3 197.7 26.3 179..7 27.245 256.8 25.8 237.0 26.9 217.9 28.0 198.8 29.150 280.5 24.7 259.3 28.7 238.8 30.0 217.9 31.235 265.8 21.7 251.8 21.2 236.5 26.9 221.1 29.940 290.7 22.2 275.0 24.7 259.0 27.5 242.3 30.545 317.7 22.7 300.9 25.7 283.5 28.1 265.3 31.050 346.3 23.2 327.9 25.8 309.1 28.7 290.7 31.535 139.0 11.3 131.0 12.1 120.0 13.2 109.0 14.240 153.0 11.8 143.0 12.6 128.0 13.6 119.0 15.545 165.0 12.3 154.0 13.1 132.0 14.2 127.0 16.750 180.0 12.9 167.0 13.7 135.0 14.8 129.0 17.435 161.9 12.4 151.0 13.3 136.8 14.2 127.2 14.940 183.1 12.8 168.0 13.7 152.3 15.1 138.7 15.645 204.3 13.2 185.0 14.2 167.6 15.5 154.2 16.250 215.3 13.4 202.0 14.6 186.9 15.9 163.6 16.935 201.5 16.6 186.6 17.1 168.5 18.4 152.0 19.640 227.2 17.1 212.0 17.7 188.7 19.4 170.4 20.545 252.8 17.5 237.0 18.2 212.4 20.0 191.5 21.450 285.5 18.0 263.3 18.7 238.0 20.7 216.2 22.235 249.3 22.6 229.6 23.9 209.5 25.4 187.8 26.940 272.9 23.7 251.2 25.3 228.8 26.8 205.5 28.345 297.3 25.0 272.9 26.7 248.8 28.2 224.0 29.750 322.1 26.3 294.1 28.2 268.5 29.7 242.5 31.2SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE17

Section 5FEATURESMODEL PC 30-01 TO PC 80-01CABINETS: Cabinets are constructed of heavily zinc coatedgalvanized steel, chemically cleaned and phosphatized to bondthe specially formulated corrosion inhibiting, polyester powdercoating.COMPRESSOR: single or Dual semi hermetic compressors areapplied together with solid state compressor motor protection.CONDENSER COIL: condenser coils are formed of seamlesssmooth surface or inner grooved copper tubing with mechanicallybonded aluminium alloy plate fin slit type.CONDENSER FAN MOTOR: permanent split Capacitor motor withpermanently lubricated ball bearing and internal thermal protector.ELECTRONIC OIL PRESSURE SWITCH: Protects compressor fromloss of compressor oil.HIGH PRESSURE SWITCH: Protects compressor from excessivecondensing pressure.LOW PRESSURE SWITCH: Protects compressorfrom excessive evaporating pressure.CRANKCASE HEATER: Protects compressor failure caused byfreezing of compressor oil.RECYCLING TIME DELAY RELAY: Protects compressor from hardstarting condition.STANDARD FEATURESOPTIONAL FEATURES• Semi-hermetic compressor • Part winding start (PC50-01 to PC80-01)• Solid sate compressor motor protection. • 220 V. control circuit• PSC motor with thermal protection. • Pump down circuit• Electronic oil pressure protection • Two speed fan motor• High pressure protection • Copper fins• Low pressure protection • Multiple hermetic compressor unit• Crankcase heater• Magnetic contactor• Recycling time delay relay• 24 V. control circuit.• Capacity steps control.• Sequential start (Dual compressor model)• Service valve18

Section 5SPECIFICATIONS:CONDENSING UNITUNIT MODEL PC 30-01 35-01 40-01 50-01 60-01 70-01 80-01NOMINAL COOLING CAPACITY MBH 277.0 350.0 386.0 466.0 554.0 700.0 772.0AT 95ºF AMBT/45ºF ASST KW 81.2 102.6 113.1 136.6 162.4 205.2 226.3POWER SOURCE V/PH/Hz 380-420/3/50CAPACITY STEPS % 100/50/0 100/66/0 100/50/0CONNECTIONSSUCTION-QUANTITY....ODS inch 1-5/8 2-1/8 2..1-5/8 2..1-5/8 2...2-1/8LIQUID -QUANTITY....ODS inch 7/8 7/8 2..3/4 2...7/8 2...7/8UNIT DIMENSION(mm) A 1885 2040 2040 2040B 2395 2595 3180 3945C 1325 1540 1490 1490UNIT OPERATING WEIGHT Kgs/Lbs 795/1750 814/1790 825/1815 866/1905 887/1950 1314/2890 1409/3100COMPRESSORSTYPESEMI HERMETICPOWER SOURCE V/PH/Hz 380-420/3/50MOTOR HP/QUANTITY 30/1 35/1 40/1 25/2 30/2 35/2 40/2RATED LOAD AMPS EACH A 59.0 62.7 64.3 45.0 59.0 62.7 64.3LOCKED ROTOR AMPS EACH A 200.0 225.0 239.0 165.0 200.0 225.0 239.0CONDENSER COILTYPEPLATE FIN (SLIT TYPE) BONDED WITH PLAIN OR INNER GROOVE COPPER TUBESNUMBER OF CIRCUIT 1 1 1 2 2 2 2FACE AREA FT 2 /M 2 39.2/3.64 50/4.65 50/4.65 66/6.13 66/6.13 100/9.3 100/9.3NO. OF ROWS 2 3 4 3 4 3 4NO. OF FIN PER INCH/METRE 14/551 14/551 12/472 12/472 14/551 12/472 12/472CONDENSER FANTYPEPROPELLERQUANTITY 4 4 4 6 6 8 8DIAMETER inch 26 28 28 26 26 28 28DRIVEN METHODDIRECTAIR FLOW CFM 21,500 25,000 25,000 33,000 33,000 50,000 50,000CONDENSER FAN MOTORTYPEPERMANENT SPLIT CAPACITORPOWER SOURCE V/PH/Hz 220/1/50QUANTITY 4 4 4 6 6 8 8POWER OUTPUT HP/KW 0.75/0.56 0.75/0.56 0.75/0.56 0.75/0.56 0.75/0.56 0.75/0.56 0.75/0.56RPM 900 900 900 900 900 900 900FULL LOAD AMP EACH A 4.5 4.5 4.5 4.5 4.5 4.5 4.5TYPE OF REFRIGERANT R-22STANDARD COMPONENTSREFRIGERANT HOLDING CHARGE BY R-22FILTER DRIERFIELD SUPPLYSIGHT GLASSFIELD SUPPLYSERVICE VALVESCOMPRESSOR SERVICE VALVE AND LIQUID SHUT OFF VALVECOMPRESSOR PROTECTIONSOLID STATE MODULEFAN MOTOR PROTECTIONINTERNAL THERMALHIGH PRESSURE PROTECTION YES YES YES YES YES YES YESLOW PRESSURE PROTECTION YES YES YES YES YES YES YESOIL PRESSURE PROTECTION YES YES YES YES YES YES YESRECYCLING TIME DELAY RELAY YES YES YES YES YES YES YESCRANKCASE HEATER YES YES YES YES YES YES YESMAGNETIC CONTACTOR YES YES YES YES YES YES YES24V CONTROL CIRCUIT YES YES YES YES YES YES YESCAPACITY STEPS CONTROL YES YES YES YES YES YES YESUNDER OVER VOLTAGE PROTECTION OPTION OPTION OPTION OPTION OPTION OPTION OPTIONSHIPPING DIMENSION (mm) A 1985 2140 2140 2140B 2495 2695 3280 4045C 1475 1690 1640 1690SHIPPING HEIGHT Kgs/Lbs 835/1837 854/1879 865/1903 916/2015 937/2061 1374/3023 1469/3232PC30-01 TO PC40-01PC50-01 TO -C60-01PC70-01 to PC80-0119

Section 5PERFORMANCE DATAUNITMODELSATURATEDSUCTION TEMP.ºFAIR TEMPERATURE ENTERING CONDENSER ºF85 95 105 115MBH KW MBH KW MBH KW MBH KW35 246.0 19.1 235.0 20.5 202.8 21.8 180.6 23.3PC30-0140 273.7 19.7 256.0 21.3 224.9 22.8 199.4 24.445 301.4 20.4 277.0 22.0 249.3 23.8 221.6 25.550 330.2 21.0 298.0 22.5 273.3 24.7 234.8 26.535 303.1 24.3 284.0 26.3 259.5 27.7 236.6 29.6PC35-0140 341.3 25.0 317.0 27.0 291.1 28.6 263.9 30.645 377.3 25.6 350.0 27.5 322.7 29.6 295.5 31.550 417.6 26.1 383.0 28.3 358.7 30.6 329.3 32.635 334.2 28.4 312.0 31.2 282.3 32.2 255.9 33.3PC40-0140 372.8 29.3 349.0 31.7 317.6 33.0 290.1 34.745 416.9 30.1 386.0 32.9 354.0 34.1 324.2 36.150 464.3 30.9 423.0 33.3 394.8 35.0 358.5 37.335 403.0 33.2 370.0 34.2 337.0 36.8 305.8 39.2PC50-0140 454.4 34.2 416.0 35.4 377.4 38.8 340.8 41.045 505.6 35.0 466.0 36.6 424.8 40.0 383.0 42.850 571.6 36.0 516.0 37.4 476.4 41.1 432.4 44.435 492.0 38.2 470.0 41.0 405.6 43.6 361.2 46.6PC60-0140 547.4 39.4 512.0 42.6 449.8 45.6 398.8 48.945 602.8 40.8 554.0 44.0 498.6 47.6 443.2 51.050 660.4 42.0 596.0 45.0 547.4 49.4 487.6 53.035 606.2 48.6 568.0 52.6 519.0 55.4 473.2 59.2PC70-0140 682.6 50.0 634.0 54.6 582.2 57.2 527.8 61.245 754.6 51.2 700.0 55.0 645.4 59.2 591.0 63.050 835.2 52.2 766.0 56.6 717.4 61.2 658.6 65.235 668.4 56.8 624.0 62.4 564.6 64.4 511.8 66.6PC80-0140 745.6 58.6 698.0 63.4 635.2 66.0 580.2 69.445 833.8 60.2 772.0 65.8 708.0 68.2 648.4 72.250 928.6 61.7 846.0 66.6 789.6 70.0 720.0 74.620

Section 6ROOF TOP (SERIES SR)10.8 TO 103 KW 37,000 TO 351,000 BtuhThese rooftop units are complete, self contained airconditioners fully assembled, wire, charged and testedprior to shipment, each unit is delivered ready foroperation after simple electrical and duct connections.This series is applicable for outdoor installation either theroof or concrete slab, for supermarkets, shopping centers,theatres, restaurants, office building and industrial plants.The units are air cooled, eliminating the need for city water,plumbing or cooling towers.21

Section 61. EVAPORATOR SECTIONDual evaporator blowers furnish maximum coolingefficiency over the entire surface of the deep row, coppertube-aluminum fin evaporator coil. Statically anddynamically balanced and belt-driven for quiet operation.Adjustable pulleys permit the selection of precise blowerperformance for various static pressure conditions. Blowermotors are fitted with inherent thermal protectors.2. COMPRESSORSAll models are equipped with hermetic compressorssealed against dirt and moisture. Both compressors havean independent refrigerant circuit and include thermal andpressure limiting devices. Compressors are provided withcrankcase heaters. All compressors are mounted onvibration isolators for quiet operation.3. CONDENSER SECTIONThe condenser coil has a large face area for maximumefficiency and consists of full collared aluminum finsbonded to copper tubes. Direct-driven propeller fansdirect large volume of air through the condenser coils formaximum cooling efficiency. Motors are permanentlylubricated, permanent split capacitor type and fitted withinherent overload protectors.4. CONTROLSAll Units are completely internally wired with separatecontrol and power supply terminals. all models areequipped with internal compressor overload protection,high and low pressure controls.5. CABINETResistant cabinets are fabricated from heavily zinc coatedgalvanized steel, chemically cleaned and phosphatized tobond the specially formulated corrosion inhibitingenamel. This automated process provided the unit with anattractive and weather resistant finish.22

Section 6SPECIFICATIONS:ModelSR 036Z 052Z 060Z 077Z 104T 122T 154T 208T 244T 307T 360TNominal cooling capacity at kW 10.8 14.9 17.8 22.6 28.3 35.3 43.1 57.4 70.8 84.5 10327ºCDB/19º5 CWB indoor air MBH 37 51 61 77 97 120 147 196 242 288 351temp. 35ºC outdoor air temp. Kcal/h 9287 12812 15306 19433 24334 30353 37059 49355 60877 72657 88564Power source v/Ph/Hz 380/3/50Unit outside dimension(mm) Height 785 943 992 1302 1292 1495 1495Width 1020 1020 1400 1890Depth 1470 1670 2290 2260 2490Unit net weight Kgs 175 180 190 270 290 480 520 870 880 990 999CompressorType hermatically sealed Scroll Reciprocate Scroll ReciprocateQuantity 1 1 1 2 1 1 1 2 2 3 3CondenserTypePlate fin (corrugate type) bonded with copper tubeFace area m 2 0.69 0.87 0.87 1.07 1.42 1.82 2.06 2.50 3.18 3.76 3.76Row/No. of fin Fins/m 2/551 2/551 2/551 3/551 3/551 3/551 3/551 3/551 3/551 3/551 3/551High Ambient model Row/fins 2/551 2/551 2/551 3/551 3/551 3/551 4/551 4/551 4/551 4/551 4/551Condenser fanTypePropellerDia-No. inch 24-1 24-1 24-1 26-1 28-1 26-2 26-2 28-2 24-4 24-4 24-4DriveDirectNominal Airflow rate L/S 1600 2000 2000 2250 2670 4250 4500 5340 7250 8000 8000Condenser motorTypePermanent split capacitorPower input (each) W 400 400 400 654 654 654 654 630 400 400 400Quantity 1 1 1 1 1 2 2 2 4 4 4EvaporatorTypePlate fin (slit type) bonded with inner groove copper tubeFace area m 2 0.25 0.32 0.32 0.59 0.63 0.78 0.87 1.32 1.58 1.83 1.83Row/No. of fin Fins/m 3/551 3/551 4/551 3/551 3/551 3/551 3/551 3/551 3/551 3/551 4/551Evaporator fanTypeDouble inlet centrifugal type (DWDI)D-W-No. inch 9-7-2 9-9-2 10-10-2 12-12-2 15-15-2 15-15-2Drive Direct V-BeltNominal air flow rate L/S 570 770 850 1150 1500 1830 2170 3000 3660 4330 4330Air flow range (min-Max) L/S 460-680 620-930 680-940 920-1390 1200-1810 1464-2200 1740-2550 2400-3610 2930-4410 3464-5220 3464-5220Evaporator motorTypeTotally enclosed induction motorPower output Kw 0.557 0.557 0.557 1.85 1.85 2.73 2.73 4.47 6.38 63.8 6.38Quantity 1 1 1 1 1 1 1 1 1 1 1Air filterTypePermanent and washableQuantity/Thickness mm 2/25 6/25Size mm 311x457 495x457 530x606 368x565 438x565 438x565Standard componentRefrigerant R-22Metering deviceThermostatic expansion valvecontrol system (option)Electronic room thermostatSafety devicesCompressor and motor overload protector.High and low pressure switch, filter drierShipping dimension (mm) Height 850 1008 1057 1367 1357 1560 1560Width 1070 1070 1450 1940Depth 1550 1750 2370 2340 2570Shipping weight Kgs 195 200 210 300 320 530 570 960 970 1080 1090Notes:-1. Capacity are gross and do not include deduction for blower motro heat.2. Other power source are also available on request.3. For High Ambient Model, the unit can be operated up to 55ºC23

Section 6DIMENSIONAL DATAMODEL SR 036Z, 052Z, 060Z1. Electrical Connection2. Low pressure reset3. High pressure reset4. Discharge access valve5. Suction access valve6. Return air connection7. Supply connection8. Condenser air intake9. Condenser air outlet10. Electrical access panel11. DrainageMODEL SR 077Z, 104T1. Electrical Connection2. Low pressure reset3. High pressure reset4. Discharge access valve5. Suction access valve6. Return air connection7. Supply connection8. Condenser air intake9. Condenser air outlet10. Electrical access panel11. DrainageMODEL SR 122T, 154Z1. Electrical Connection2. Low pressure reset3. High pressure reset4. Discharge access valve5. Suction access valve6. Return air connection7. Supply connection8. Condenser air intake9. Condenser air outlet10. Electrical access panel11. Drainage24

Section 6MODEL SR 208T1. Electrical Connection2. Low pressure reset3. High pressure reset4. Discharge access valve5. Suction access valve6. Return air connection7. Supply connection8. Condenser air intake9. Condenser air outlet10. Electrical access panel11. DrainageMODEL SR 244T1. Electrical Connection2. Low pressure reset3. High pressure reset4. Discharge access valve5. Suction access valve6. Return air connection7. Supply connection8. Condenser air intake9. Condenser air outlet10. Electrical access panel11. DrainageMODEL SR 307T, 360T1. Electrical Connection2. Low pressure reset3. High pressure reset4. Discharge access valve5. Suction access valve6. Return air connection7. Supply connection8. Condenser air intake9. Condenser air outlet10. Electrical access panel11. Drainage25

Section 6COOLING PERFORMANCE50HzUNITMODELSRAFR(CR)EWBºCENTERING AIR TEMPERATURE TO CONDENSER (ºC)25 30 35 40 46 52TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI036ZH052ZH060ZH077ZH104TH16 9.7 8.7 2.25 9.4 8.6 2.5 9.1 8.4 2.8 8.8 8.3 3.2 8.4 8.1 3.6 8.0 7.9 4.1460 19.5 11.0 7.1 2.32 10.6 6.9 2.6 10.3 6.8 2.9 9.9 6.7 3.3 9.5 6.5 3.7 9.1 6.3 4.1(0.188) 22 12.0 5.9 2.38 11.6 5.8 2.7 11.3 5.6 3.0 10.9 5.5 3.3 10.4 5.3 3.8 9.9 5.2 4.216 10.2 9.7 2.3 9.9 9.6 2.6 9.6 9.5 2.9 9.5 9.4 3.2 9.1 9.1 3.7 8.8 8.8 4.1570 19.5 11.5 7.8 2.4 11.1 7.7 2.6 10.8 7.5 2.9 10.4 7.4 3.3 9.9 7.2 3.7 9.4 7.0 4.1(0.22) 22 12.5 6.4 2.4 12.1 6.3 2.7 11.8 6.1 3.0 11.4 6.0 3.4 10.8 5.8 3.8 10.3 5.7 4.216 10.9 10.8 2.3 10.6 10.6 2.6 10.3 10.3 2.9 10.0 10.0 3.3 9.5 9.5 3.7 9.1 9.1 4.1680 19.5 11.9 8.5 2.4 11.6 8.3 2.7 11.2 8.2 3.0 10.7 8.0 3.3 10.2 7.8 3.7 9.7 7.7 4.2(0.21) 22 13.0 6.8 2.4 12.6 6.7 2.7 12.2 6.6 3.0 11.7 6.4 3.4 11.2 6.3 3.8 10.6 6.1 4.316 13.3 11.7 3.3 12.9 11.6 3.7 12.5 11.4 4.0 12.1 11.2 4.5 11.5 10.9 5.1 11.0 10.7 5.6620 19.5 15.1 9.6 3.5 14.6 9.4 3.8 14.1 9.2 4.2 13.6 9.0 4.7 13.0 8.8 5.3 12.4 8.5 5.8(0.201) 22 16.4 8.0 3.6 15.9 7.8 4.0 15.4 7.6 4.4 14.8 7.4 4.9 14.2 7.2 5.4 13.5 7.0 6.016 14.0 13.1 3.3 13.5 12.9 3.7 13.1 12.7 4.1 12.6 12.5 4.6 12.6 12.5 5.2 12.0 12.0 5.8770 19.5 15.7 10.6 3.5 15.2 10.4 3.9 14.9 10.2 4.3 14.2 10.0 4.8 13.5 9.8 5.3 12.8 9.5 5.9(0.231) 22 17.1 8.6 3.7 16.6 8.5 4.0 16.1 8.3 4.5 15.5 8.1 4.9 14.8 7.8 5.5 14.0 7.6 6.016 14.6 14.5 3.4 14.6 14.6 3.8 14.1 14.1 4.2 13.7 13.7 4.7 13.1 13.1 5.3 12.5 12.5 5.8930 19.5 16.4 11.5 3.6 15.8 11.3 4.0 15.3 11.1 4.4 14.7 10.9 4.8 14.0 10.6 5.4 13.2 10.4 5.9(0.256) 22 17.8 9.3 3.8 17.2 9.1 4.1 16.6 8.9 4.6 16.0 8.7 5.0 15.2 8.5 5.6 14.5 8.3 6.116 16.6 14.5 4.2 15.6 14.3 4.6 15.0 14.0 5.1 14.4 13.8 5.7 13.7 13.4 6.3 13.5 13.4 7.0680 19.5 18.1 11.8 4.4 17.5 11.6 4.8 16.9 11.3 5.3 16.3 11.1 5.9 15.4 10.7 6.5 14.6 10.4 7.1(0.087) 22 19.7 9.8 4.5 19.1 9.6 5.0 18.4 9.4 5.5 17.7 9.1 6.0 16.8 8.8 6.6 15.9 8.5 7.316 16.9 16.5 4.3 16.4 16.2 4.7 16.4 16.2 5.3 15.8 15.8 5.8 15.1 15.1 6.5 14.3 14.3 7.1850 19.5 19.0 13.3 4.4 18.4 13.0 4.9 17.8 12.7 5.4 16.9 12.4 5.9 16.0 12.1 6.6 15.1 11.8 7.2(0.111) 22 20.7 10.8 4.6 20.0 10.5 5.1 19.3 10.3 5.6 18.5 10.0 6.1 17.6 9.7 6.7 16.6 9.4 7.416 17.9 17.7 4.4 17.4 17.4 4.8 16.8 16.8 5.3 16.2 16.2 5.9 15.4 15.4 6.5 14.7 14.7 7.1940 19.5 19.5 13.9 4.5 18.8 13.6 4.9 18.0 13.3 5.5 17.3 13.0 6.0 16.4 12.7 6.6 15.4 12.4 7.2(0.121) 22 21.1 11.2 4.6 20.4 11.0 5.1 19.6 10.7 5.6 18.8 10.4 6.1 17.9 10.1 6.8 17.0 9.8 7.416 20.6 18.4 5.0 20.0 18.1 5.5 19.3 17.8 6.0 18.7 17.5 6.7 17.8 17.1 7.6 16.9 16.7 8.6920 19.5 23.2 15.1 5.1 22.5 14.8 5.6 21.8 14.5 6.1 21.0 14.2 6.8 20.1 13.8 7.8 19.1 13.4 8.7(0.172) 22 25.2 12.6 5.2 24.5 12.3 5.7 23.8 12.1 6.2 23.0 11.8 7.0 22.0 11.4 7.9 20.9 11.1 8.816 21.6 20.7 5.0 20.9 20.4 5.5 20.2 20.1 6.0 20.5 20.2 6.8 19.6 19.6 7.7 18.7 18.7 8.71150 19.5 24.3 16.7 5.1 23.5 16.4 5.6 22.8 16.1 6.1 21.9 15.8 6.9 20.9 15.4 7.8 19.8 15.0 8.7(0.201) 22 26.4 13.7 5.2 25.6 13.5 5.7 24.8 13.2 6.3 23.9 12.9 7.0 22.9 12.5 8.0 21.8 12.2 8.916 23.4 23.4 5.1 22.7 22.7 5.6 22.1 22.1 6.1 21.4 21.4 6.9 20.5 20.5 7.8 19.5 19.5 8.71390 19.5 25.1 18.2 5.1 24.3 17.9 5.6 23.5 17.6 6.2 22.6 17.3 6.9 21.5 16.9 7.9 20.4 16.5 8.8(0.227) 22 27.3 14.8 5.2 26.4 14.5 5.7 25.6 14.2 6.3 24.7 13.9 7.1 23.6 13.6 8.0 22.5 13.2 9.016 26.6 23.1 6.6 25.8 22.8 7.4 25.1 22.4 8.1 24.2 22.0 9.1 23.1 21.5 10.2 22.0 21.1 11.41200 19.5 29.9 18.9 6.9 29.1 18.5 7.6 28.2 18.2 8.4 27.2 17.8 9.3 26.0 17.3 10.5 24.7 16.9 11.6(0.196) 22 32.5 15.8 7.1 31.6 15.4 7.8 30.6 15.1 8.6 29.6 14.7 9.5 28.3 14.3 10.6 27.0 13.8 11.716 27.9 25.9 6.7 27.1 25.6 7.5 26.2 25.2 8.2 25.3 24.8 9.2 25.1 24.7 10.4 24.0 24.0 11.51500 19.5 31.3 20.8 7.0 30.4 20.5 7.7 29.5 20.1 8.5 28.4 19.7 9.4 27.1 19.2 10.5 25.7 18.7 11.6(0.227) 22 34.0 17.1 7.2 33.0 16.8 7.9 32.1 16.4 8.7 30.9 16.0 9.6 29.5 15.6 10.7 28.0 15.1 11.816 29.0 28.7 6.8 29.1 28.7 7.6 28.3 28.3 8.4 27.3 27.3 9.3 26.2 26.2 10.5 25.0 25.0 11.61810 19.5 32.5 22.7 7.1 31.5 22.4 7.8 30.5 22.0 8.6 29.3 21.6 9.5 27.9 21.0 10.6 26.5 20.5 11.7(0.253) 22 35.3 18.4 7.3 34.2 18.1 8.0 33.1 17.7 8.8 31.9 17.5 9.7 30.4 16.8 10.8 28.9 16.3 11.8NOTE:1. Capacity shown are gross and do not include deduction for blowermotor heat.2. Sensible capacity is based on 27º CDB entering evaporator airtemperature. Above 27º CDB, add ▲ SHC to SHC and below 27ºCDB subtract ▲ SHC from SHC. ▲ SHC can be calculated from,1.23 (1-CR) (DB-27) AFR▲ SHC =1 0003. Direct interpolation is allowed to do. Operation out of conditionshown needs modification. Please contact our engineering division.LEGEND:AFR : AIr flow rate..........................................................l/sCR : Sensible correction factorEWB : Entering evaporatorair wet bulb temp ............................................ºCTC : Total cooling capacity......................................kWSHC : Sensible cooling capacity............................kWPI : Compressor power input.............................kW: Nominal cooling capacity............................MBH26

Section 650HzUNITMODELSRAFR(CR)EWBºCENTERING AIR TEMPERATURE TO CONDENSER (ºC)25 30 35 40 46 52TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI122TH154ZH208TH244ZH307TH360TH16 31.9 28.0 7.3 30.9 27.5 8.1 30.0 27.0 8.9 28.9 26.6 9.9 27.5 26.0 11.3 26.1 25.4 12.71464 19.5 35.8 22.8 7.6 34.8 22.4 8.4 33.8 22.0 9.2 32.6 21.5 10.2 31.1 20.9 11.5 29.5 20.3 12.8(0.196) 22 39.0 19.0 7.8 37.9 18.6 8.6 36.7 18.2 9.4 35.4 17.8 10.4 33.8 17.2 11.7 32.2 16.6 12.916 33.3 31.4 7.4 32.4 31.0 8.2 31.4 30.5 9.0 30.2 30.0 10.0 30.0 30.0 11.4 28.7 28.7 12.71830 19.5 37.5 25.1 7.7 36.5 24.7 8.5 35.3 24.3 9.3 34.0 23.8 10.3 32.3 23.2 11.6 30.6 22.6 12.8(0.226) 22 40.8 20.6 7.9 38.4 19.8 9.5 38.4 19.8 9.5 36.9 19.3 10.5 35.2 18.7 11.8 33.3 18.1 13.016 35.8 35.1 7.5 34.9 34.7 8.3 33.9 33.9 9.2 32.7 32.7 10.2 31.3 31.3 11.5 29.9 29.9 12.82200 19.5 38.9 27.4 7.7 37.7 27.0 8.5 36.5 26.5 9.3 35.1 26.0 10.4 33.3 25.4 11.6 31.5 24.7 12.9(0.196) 22 42.3 22.2 8.0 40.9 21.8 8.8 30.6 21.3 9.6 38.0 20.8 10.6 36.2 20.2 11.9 34.2 19.6 13.116 38.9 33.5 9.1 37.7 33.0 10.2 36.6 32.5 11.3 35.4 32.0 12.5 33.8 31.3 14.1 32.2 30.5 15.81740 19.5 43.7 27.4 9.3 42.5 26.9 10.4 41.3 26.4 11.5 40.0 25.9 12.7 38.3 25.3 14.4 36.7 24.6 16.1(0.204) 22 47.6 23.0 9.5 46.3 22.5 10.6 45.0 22.0 11.6 43.6 21.5 12.9 41.8 20.9 14.6 40.0 20.3 16.316 40.7 57.5 9.2 39.6 37.0 10.3 38.4 36.4 11.4 37.1 35.9 12.6 35.5 35.2 14.2 35.3 35.1 16.02170 19.5 45.7 30.4 9.4 44.5 30.0 10.5 43.1 29.4 11.6 41.7 28.9 12.8 40.0 28.2 14.5 38.2 27.5 16.1(0.235) 22 50.0 24.9 9.6 48.5 24.4 10.7 47.1 23.9 11.8 45.6 23.4 13.0 43.6 22.8 14.7 41.5 22.0 16.316 42.1 40.8 9.2 40.9 40.3 10.3 41.0 40.4 11.5 39.8 39.8 12.7 38.3 38.3 14.4 36.7 36.7 16.02550 19.5 47.3 32.5 9.5 46.1 32.0 10.6 44.7 31.5 11.6 43.2 31.0 12.9 41.3 30.3 14.5 39.3 29.6 16.2(0.256) 22 51.6 26.5 9.7 50.2 26.0 10.7 48.6 25.5 11.8 46.9 25.0 13.1 44.8 24.3 14.8 42.5 32.5 16.416 54.1 46.9 12.7 52.6 46.2 14.2 51.0 45.5 15.7 49.3 44.7 17.4 47.1 43.7 19.8 44.9 42.8 22.12400 19.5 60.8 38.3 13.3 59.1 37.6 14.7 57.4 36.9 16.2 55.4 36.2 17.9 53.0 35.2 20.2 50.6 34.3 22.4(0.190) 22 66.1 32.0 13.6 64.2 31.4 15.1 62.4 30.7 16.3 62.1 34.1 20.8 57.8 29.0 20.6 55.1 28.1 22.716 56.7 52.5 12.9 55.0 51.8 14.4 53.4 51.1 15.9 51.6 50.3 17.6 51.2 50.1 20.0 49.0 49.0 22.33000 19.5 63.6 42.2 13.4 61.8 41.5 14.9 60.1 40.8 16.4 58.0 40.0 18.1 55.3 39.0 20.3 52.6 38.0 22.5(0.221) 22 69.0 34.7 13.9 67.1 34.0 15.3 65.3 33.4 16.7 63.0 32.6 18.5 60.2 31.7 20.7 57.3 30.7 22.816 58.9 58.0 13.1 59.1 58.1 14.7 57.4 57.4 16.1 55.6 55.6 17.9 53.4 53.4 20.2 51.0 51.0 22.43610 19.5 66.1 46.0 13.6 64.1 45.2 15.1 62.1 44.5 16.5 59.8 43.7 18.3 57.0 42.7 20.4 54.2 41.7 22.6(0.246) 22 71.6 37.3 14.0 69.5 36.6 15.4 67.4 35.9 16.9 65.0 35.1 18.7 62.1 34.1 20.8 59.1 33.2 22.916 64.1 56.2 14.3 62.3 55.9 15.8 60.4 54.6 17.5 58.3 53.6 19.4 55.7 52.4 22.2 52.8 51.8 24.82930 19.5 72.0 45.8 14.8 70.0 45.0 16.3 67.9 44.1 18.0 65.6 43.2 19.9 62.7 42.1 22.5 59.6 40.9 25.0(0.193) 22 78.3 38.2 15.2 76.1 37.4 16.8 73.8 36.6 18.5 71.3 35.7 20.3 68.2 34.6 22.8 64.7 33.4 25.416 67.1 63.0 14.5 65.2 65.2 16.0 63.2 61.3 17.7 61.0 60.4 19.5 60.6 60.3 22.3 57.9 57.9 25.03660 19.5 75.1 50.8 15.0 73.0 50.1 16.5 70.8 49.2 18.1 68.2 48.3 20.0 65.5 47.2 22.2 61.6 45.8 25.1(0.224) 22 81.9 41.4 15.5 79.6 40.6 17.0 77.1 39.8 18.5 74.3 38.8 20.5 70.8 37.6 23.0 67.1 36.4 25.616 72.0 70.7 14.8 70.1 69.9 16.3 68.1 68.1 18.0 66.0 66.0 19.9 63.2 63.2 22.5 60.3 60.3 25.14410 19.5 78.1 55.1 15.2 75.8 54.2 16.7 73.3 53.3 18.3 70.6 52.3 20.2 67.1 51.1 22.7 63.5 49.8 25.3(0.249) 22 84.8 44.5 15.6 82.2 43.7 17.2 79.5 42.8 18.7 76.5 41.8 20.7 72.8 40.6 23.2 68.9 39.4 25.816 78.0 67.4 18.7 75.6 66.3 20.9 73.3 65.2 23.2 70.8 64.1 25.6 67.7 62.7 28.9 64.5 61.3 32.23464 19.5 87.6 55.0 19.2 85.1 54.0 21.4 82.6 53.0 23.6 79.8 51.9 26.2 76.4 50.6 29.5 72.9 49.2 32.7(0.196) 22 95.4 46.1 19.6 92.7 45.1 21.8 89.9 44.1 24.0 86.9 43.1 26.6 83.3 41.8 29.9 79.5 40.4 53.116 81.6 75.4 18.9 79.2 74.3 21.1 76.8 73.3 23.4 74.2 72.2 25.9 70.8 70.7 29.1 70.5 70.5 32.64300 19.5 91.8 60.7 19.4 89.1 59.6 21.6 86.5 58.6 23.9 83.6 57.5 26.4 79.8 56.1 29.7 75.9 54.6 32.9(0.227) 22 99.8 50.0 19.9 96.9 49.0 22.0 94.1 48.0 24.2 90.8 46.9 26.9 86.8 45.5 30.1 82.5 44.1 33.316 84.8 83.3 19.1 82.2 82.2 21.3 82.7 82.4 23.6 80.1 80.1 26.2 76.9 76.9 29.5 73.6 73.6 32.75220 19.5 95.4 66.2 19.6 92.5 65.1 21.8 89.6 64.0 23.9 86.3 62.8 26.6 82.3 61.3 29.8 78.2 59.9 33.0(0.252) 22 103.8 53.8 20.0 100.6 52.8 22.2 97.3 51.6 24.3 93.8 50.5 27.0 89.4 49.0 30.3 84.9 47.6 33.516 96.2 90.6 32.1 91.9 88.7 34.0 87.8 86.8 35.7 87.4 86.6 38.7 82.4 82.4 41.44330 19.5 108.2 73.6 34.7 103.9 71.7 36.7 99.1 69.8 38.6 94.3 67.9 40.7 87.9 65.5 43.4 NA(0.196) 22 118.2 61.2 36.7 113.4 59.4 38.8 108.1 57.5 41.0 102.6 55.2 43.4 95.6 53.2 46.516 104.4 102.6 33.7 100.2 100.2 35.8 96.1 96.1 37.8 91.8 91.8 40.0 86.4 86.4 42.85220 19.5 113.3 80.8 35.5 108.2 78.8 37.6 103.0 76.8 39.6 97.6 74.8 41.8 90.8 72.3 44.5 NA(0.117) 22 123.3 66.2 37.6 117.7 64.3 39.8 112.0 62.3 42.1 106.0 60.3 44.6 98.5 57.8 47.816 105.7 105.6 34.0 101.6 101.6 36.1 97.3 97.3 38.1 92.9 92.9 40.3 87.4 87.4 43.25480 19.5 114.5 82.9 35.8 109.3 80.9 37.8 103.9 78.9 39.9 98.4 76.8 42.0 91.5 74.2 44.8(0.122) 22 124.4 67.6 37.8 118.8 65.7 40.0 112.9 63.7 42.4 106.9 61.6 44.9 99.2 59.1 48.1NA27

Section 6EVAPORATOR FAN PERFORMANCEEVAPORATOR BLOWER MODEL SR036Z,SR052Z,SR060Z is equipped with direct driven motor as standard.UNITMODELFAN SPEEDEXTERNAL STATIC PRESSURE (Pa)20 40 60 80 100 120HI 580 572 560 550 551 486SR036Z MED 470 464 448 430 420LOW 376HI 993 900 850 770 620SR052Z MED 666 860 770 620LOW 810 700 600HI 1030 1000 921 788 719 630SR060Z MED 868 859 827 742LOW 701 689 667Model SR077Z to SR307Z are possible to adjust RPM of blower to suit the external static pressure. Motor which equipped from factory can be operated above the solid line inthe performance table.Variable pitch motor pulley is provided for field adjustment.Model SR077Z to SR 122ZUNITMODELSRAIR FLOWL/sEXTERNAL STATIC PRESSURE (Pa)20 40 60 80 100 120 140 160 180 200 220 240 260 300077104122920 RPM 720 780 840 910 960 1020 1070 1130 1180 1230 1270 1320 1360 1440BKW 0.18 0.21 0.24 0.28 0.32 0.36 0.40 0.44 0.48 0.52 0.57 0.61 0.66 0.751150 RPM 850 910 960 1010 1060 1110 1160 1210 1250 1300 1340 1380 1420 1500BKW 0.31 0.35 0.39 0.43 0.48 0.52 0.57 0.62 0.67 0.72 0.77 0.85 0.87 0.981390 RPM 1010 1050 1100 1140 1180 1230 1270 1310 1350 1390 1427 1470 1500 1580BKW 0.53 0.58 0.62 0.67 0.72 0.77 0.82 0.88 0.93 0.99 1.05 1.11 1.17 1.291200 RPM 780 840 890 940 990 1040 1090 1340 1190 1230 1275 1320 1360 1440BKW 0.28 0.32 0.36 0.40 0.44 0.48 0.53 0.57 0.62 0.67 0.72 0.77 0.83 0.931500 RPM 990 1030 1080 1120 1160 1200 1240 1280 1320 1360 1400 1430 1470 1540BKW 0.56 0.61 0.65 0.70 0.75 0.80 0.85 0.91 0.96 1.02 1.08 1.14 1.20 1.321810 RPM 1150 1190 1220 1260 1300 1330 1360 1400 1430 1470 1500 1530 1570 1600BKW 0.93 0.98 1.03 1.09 1.14 1.20 1.26 1.32 1.38 1.44 1.51 1.57 1.64 1.711464 RPM 650 700 740 790 830 870 920 960 1000 1040 1080 1120 1150 1230BKW 0.39 0.44 0.49 0.54 0.60 0.66 0.72 0.79 0.85 0.92 0.99 1.05 1.12 1.261830 RPM 820 860 900 930 970 1000 1040 1070 1110 1140 1170 1210 1240 1300BKW 0.77 0.83 0.89 0.96 1.03 1.10 1.17 1.25 1.32 1.40 1.48 1.56 1.64 1.812200 RPM 950 980 1020 1050 1080 1110 1140 1160 1190 1220 1250 1280 1310 1360BKW 1.24 1.32 1.39 1.47 1.54 1.62 1.70 1.79 .1.87 1.96 2.05 2.14 2.23 2.41Standard blower motor and driveBLOWER WHEELMOTORMODELSRDIAINCHSIZE SHAFTPULLEYWIDTH DIAQTY. P.D.INCH MM INCHFAN SPEEDRANGEFRAMENO.OUT PUT SPEEDHP. KW. RPMSHAFTDIAMMPULLEYPDRINCH077 9 9 30.2 2 7.9 773 - 953 90L 2 1.5 1420 24 4.3-5.3104 9 9 30.2 2 6.9 773 - 953 90L 2 1.5 1420 24 4.3 - 5.3122 10 10 30.2 2 7.9 773 - 953 100L 3 2.25 1420 28 4.3 - 5.328

Model SR154Z to SR360TSection 6UNITMODELSRAIR FLOWL/sEXTERNAL STATIC PRESSURE (Pa)50 100 150 200 250 300 350 400 450 500 550 600 650 7001740 RPM 800 890 980 1070 1160 1240 1330 1400 1480 1550 1630 1700 1760 1830BKW 0.68 0.83 1.00 1.18 1.37 1.57 1.77 1.97 2.18 2.39 2.60 2.82 3.03 3.241542082443073602170 RPM 930 1010 1090 1160 1240 1310 1380 1450 1520 1580 1650 - - -BKW 1.18 1.36 1.55 1.76 1.97 2.19 2.42 2.66 2.90 3.15 3.40 - - -2610 RPM 1070 1130 1200 1260 1330 1390 1450 1510 - - - - - -BKW 1.88 2.08 2.30 2.53 2.76 3.01 3.26 3.52 - - - - - -2400 RPM 570 670 760 850 930 1010 1080 1150 1220 1280 1340 1400 1460 -BKW 0.77 0.97 1.17 1.38 1.60 1.83 2.06 2.31 2.57 2.83 3.11 3.39 3.69 -3000 RPM 660 740 820 900 970 1040 1110 1170 1240 1300 1350 1410 1470 -BKW 1.36 1.59 1.83 2.08 2.34 2.60 2.87 3.15 3.43 3.72 4.02 4.33 4.64 -3614 RPM 760 830 890 960 1020 1080 1150 1200 1260 1320 1370 1430 1480 -BKW 2.22 2.49 2.78 3.06 3.36 3.66 3.97 4.28 4.60 4.93 5.26 5.59 5.94 -2930 RPM 620 700 780 860 940 1010 1080 1150 1210 1270 1330 1390 1440 1500BKW 1.19 1.42 1.65 1.89 2.14 2.40 2.66 2.93 3.21 3.50 3.79 4.09 4.40 4.713660 RPM 740 800 860 930 990 1050 1120 1180 1230 1290 1350 1400 1450 -BKW 2.15 2.42 2.70 2.99 3.29 3.59 3.89 4.21 4.53 4.85 5.18 5.52 5.86 -4410 RPM 860 910 960 1020 1070 1120 1180 1230 1280 1330 1380 1430 - -BKW 3.58 3.90 4.23 4.56 4.91 5.26 5.61 5.97 6.34 6.71 7.08 7.50 - -3464 RPM 540 610 680 750 820 880 940 1000 1050 1100 1150 - - -BKW 1.26 1.56 1.90 2.25 2.63 3.02 3.42 3.83 4.25 4.68 5.12 - - -4330 RPM 616 680 740 800 860 910 970 1020 1070 1120 1160 - - -BKW 2.17 2.52 2.90 3.31 3.73 4.17 4.63 5.10 5.58 6.08 6.58 - - -5220 RPM 710 760 810 860 920 960 1010 1060 1100 1150 1190 - - -BKW 3.53 3.93 4.36 4.81 5.29 5.78 6.28 6.81 7.34 7.89 8.45 - - -4330 RPM 634 697 758 817 873 928 981 1032 1082 1130 - - - -BKW 2.26 2.63 3.01 3.42 3.85 4.30 4.76 5.23 5.72 6.22 - - - -5220 RPM 729 783 835 886 935 984 1031 - - - - - - -BKW 3.70 4.11 4.55 5.01 5.49 5.99 6.50 - - - - - - -5480 RPM 763 814 864 913 960 - - - - - - - - -BKW 4.26 4.69 5.15 5.62 6.20 - - - - - - - - -Standard blower motor and driveBLOWER WHEELMOTORMODELSRDIAINCHSIZESHAFTPULLEYWIDTH DIAQTY. P.D.INCH MM INCHFAN SPEEDRANGEFRAMENO.OUT PUTHP. KW.SPEEDRPMSHAFTDIAmm.PULLEYPDRINCH154 10 10 30.2 2 7.9 88 - 1060 100L 3 2.25 1420 28 4.9 - 5.9208 12 12 30.2 2 10.4 674 - 811 112M 5 3.7 1430 28 4.9 - 5.9244 12 12 30.2 2 8.4 840 - 1011 132S 7.5 5.5 1440 38 4.9 - 5.9307 15 15 30.2 2 10.4 678 - 817 132S 7.5 5.5 1440 38 4.9 - 5.9360 15 15 30.2 2 10.4 678 - 817 132S 7.5 5.5 1440 38 4.9 - 5.9RPMBKW: Fan speed (r.p.m.): Brake power (kW): Standard factory provision operating range: Driving accessory modification operating range: Shows fan speed on factory setting: Shows the operating range of of the fan motorbased on factory setting. In case the fan motoris used out of the range, change motor size.29

Section 6ELECTRICAL DATACooling Models OnlyMODELSRV / PH / Hz.VoltageRangeMin.COMRESSORNO.1COMRESSORNO.2COMRESSORNO.3EVAPORATORFAN MOTORCONDENSERFAN MOTORMax. RNC RLA LRA RNC RLA LRA RNC RLA LRA V/ PH / Hz kW FLA V/ PH / Hz kW FLA036Z 380 / 3 / 50 342 462 4.7 7.1 46.0 - - - - - - 220-240/1/50 0.37 3.5 220-240/1/50 0.25 2.2052Z 380 / 3 / 50 342 462 7.4 8.9 65.5 - - - - - - 220-240/1/50 0.37 3.5 220-240/1/50 0.25 2.2060Z 380 / 3 / 50 342 462 7.9 10.0 74.0 - - - - - - 220-240/1/50 0.37 3.5 220-240/1/50 0.25 2.2077Z 380 / 3 / 50 342 462 5.1 7.2 48.0 5.1 7.2 48.0 - - - 380-420/3/50 1.50 3.1 220-240/1/50 0.37 3.2104T 380 / 3 / 50 342 462 17.7 21.1 104.0 - - - - - - 380-420/3/50 1.50 3.1 220-240/1/50 0.56 4.5122T 380 / 3 / 50 342 462 21.5 27.6 135.0 - - - - - - 380-420/3/50 2.25 8.5 220-240/1/50 0.37 3.2154Z 380 / 3 / 50 342 462 23.1 27.2 198.0 - - - - - - 380-420/3/50 2.25 8.5 220-240/1/50 0.37 3.2208T 380 / 3 / 50 342 462 18.1 21.1 104.0 18.1 21.1 104.0 - - - 380-420/3/50 3.70 13.8 220-240/1/50 0.56 4.5244T 380 / 3 / 50 342 462 23.5 27.6 135.0 23.5 27.6 135.0 - - - 380-420/3/50 5.50 20.0 220-240/1/50 0.25 2.2307T 380 / 3 / 50 342 462 17.9 21.1 104.0 17.9 21.1 104.0 17.9 21.1 104.0 380-420/3/50 5.50 20.0 220-240/1/50 0.25 2.2360T 380 / 3 / 50 342 462 22.7 27.6 135.0 22.7 27.6 135.0 22.7 27.6 135.0 380-420/3/50 5.50 20.0 220-240/1/50 0.25 2.2Notes:1. RNC is running current at nominal condition.2. Phase imbalance must not exceed 2%3. All field installed wiring, devices and fusesmust comply with local electrical codesLegend:FLA : Full load amperesAkW : Power output kWLRA : Locked rotor amperesARLA : Rated load amperesARNC : Running amperesASpecification in this catalog are subject to change without notice30

Registered OfficeMeaptron Corporation3532-A East TC JesterHouston, Texas 77018U.S.A.Tel.: 713-263-8686Fax: 713-263-1133E-mail: meaptron@worldnet.att.netWebsite: www.meaptron.comFactories(ISO 9000 Certified)71/5 Moo 3, Tivanont Road, Tumbol BanmalAmphoe Pakkret, Nontaburi, Thailand.Via Pinamonte da Vimercate, 320121 Milano, Italia.