mueller® hydrant defender⢠security device - Mueller Co.
mueller® hydrant defender⢠security device - Mueller Co.
mueller® hydrant defender⢠security device - Mueller Co.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9A.2Rev. 9-09MUELLER ® SUPER CENTURION 250/HS "HIGH SECURITY" FIRE HYDRANT❏❏❏❏❏❏❏❏❏❏❏❏❏❏Super Centurion 250/HS 3-way catalog numbersA-421 4-1/2" main valve opening three way (two hose nozzles and one pumper nozzle)A-423 5-1/4" main valve opening three way (two hose nozzles and one pumper nozzle)Super Centurion 200/HS 2-way catalog numbersA-420 4-1/2" main valve opening two way (two hose nozzles)A-422 5-1/4" main valve opening two way (two hose nozzles)A-425 5-1/4" main valve opening two way (two pumper nozzles)Super Centurion 200/HS 1-way catalog numberA-424 4-1/2" main valve opening one way (one pumper nozzle)10 year limited warranty on material and workmanshipMeets all applicable parts of ANSI/AWWA C502 StandardPost type dry barrel designDry top design with O-ring sealed oil reservoirHydrant shoe incorporates a fabric and steel reinforced elastomeric flappercheck valve located inside the <strong>hydrant</strong> inlet, allowing normal operation and accessto the <strong>hydrant</strong> main valve through bonnet or ground flange.Traffic feature with stainless steel safety stem coupling<strong>Co</strong>mpression-type main valve closes with pressure for positive seal; it is made of rubberand is conveniently reversible providing a spare for long service life.Operating nut available in wide variety of shapes and sizes – open left or rightField replaceable hose and pumper nozzlesHose and pumper nozzles have large radius, full flow openings for low friction loss<strong>Co</strong>ntoured shoe is designed for full flowDual bronze drain valves provide effective barrel drainage250 psig (1723 kPa) maximum working pressure,500 psig (3447 kPa) static test pressure for 3-way <strong>hydrant</strong>s;200 psig (1379 kPa) maximum working pressure,400 psig (2758 kPa) static test pressure for 2-way and 1-way <strong>hydrant</strong>sDimensions32"1-5/8"BURY18"Bury - 1'6" (0.46m)minimum; longer by 6"(152 mm) intervals.19"6" ShoeNon-rotating bolt design:cast-in pads eliminate needfor anti-rotation bolts.Front view detailof Mechanical Joint
MUELLER ® TAMPER-PROOFACCESSORIES9A.7Rev. 9-09Wrenches for 4-1/2” and 5-1/4” Tamper-Proof HydrantsA-391Operating Nut WrenchUsed to assemble and disassemblethe Tamper-Proof Hold-Down Nut.A-384Spanner WrenchUsed to assemble and disassemble the Tamper-ProofOperating Nut Cap.A-374Operating WrenchOperates the Tamper-Proof Hydrant and removesHose and Pumper Nozzle Caps. (Also operates<strong>hydrant</strong>s without tamper-proof feature).
9A.8 MUELLER ® TAMPER-RESISTANTHYDRANT HOLD-DOWN NUTRev. 9-09The <strong>Mueller</strong> Tamper-Resistant Hydrant Hold-Down Nut is speciallydesigned to make <strong>Mueller</strong> Centurion ® and Improved FireHydrants more resistant to tampering. It replaces the existinghold-down nut (and weather cap on <strong>hydrant</strong>s dated 1987 andearlier) and surrounds the operating nut, helping prevent unau-thorized operation of the <strong>hydrant</strong>. The special operating wrenchfor use with this option may also be used with other <strong>hydrant</strong>s.The O-ring sealed hold-down nut may be ordered "open left" or"open right" as either original equipment or as a retrofit.Retrofit parts and wrenchPart NumbersCenturionHydrantImprovedHydrantOpen right 142978 175347Open left 143112 142037Operating wrench A-310 A-310PreinstalledWhen ordered as original equipment, option #004 must be specified.
Change language