Download PDF - Bernina

THROUGH THE NEEDLEthe vertical and horizontal centers of theborder strip. Mark a line 4 1 /2” down fromthe short center; mark a chalk line 2 1 /2”from the long center.Place the fabric in the hoop so that thelong centerline is on the line marked 2 1 /2”from center and the line on the fabric thatis 4 1 /2” from the center of the strip is onthe center line of the hoop.After embroidering two motifs, repositionthe fabric in the hoop and embroider athird motif. Repeat for the other threeborders. Trim borders to 30 1 /2”.Putting It All TogetherFirst Border: Sew the 14 1 /2” borders to opposite sides of center square; sew the15 3 /4” borders to the other two sides. The square should now measure 15 3 /4” x15 3 /4”.Setting Triangles: Sew the large red triangles to each side of the bordered centersquare. Square up to measure 21 3 /4” x 21 3 /4”.Sew two black and white border strips to oppositesides of the square; sew two 1 7 /8” squares to eachend of the remaining black and white border stripsand sew to bordered center square. Quilt top shouldnow measure 24 1 /2” x 24 1 /2”.Using the red 3 1 /2” squares, piece four borders withvarious reds. Sew gray squares to the ends of two ofthe border strips. Attach the borders to the quilt top.With the gray and the black prints construct four4-patch blocks. Attach to the ends of two blackborders; sew the black borders to the quilt. Quilt topshould now measure 42 1 /2” x 42 1 /2”.Quilt and bind as desired.8