KU-3 (2nd revised)-T.cdr - Leonhard Kurz

Up-down Hot Stamping MachineKU-3KU-3 ,。,。:、、。KU-3The up-down machine KU-3 isdeveloped for hot stamping of flatsurface products. It can apply ondifferent substrates.Decoration with hot stamping byusing different size and hardness ofsilicon dies.The applicable products are includedbottle cap, cosmetic container, keybuckle and logo stamping etc.

:,,。,、。,,, 。 , 400 oC。 ,,。General Features:Main spindles are grinded precisely and canbe operated even under low pressure.To control sequence with three timers:press/ delay/ foil feed.Specially designed foil feeder, easyadjustable and accurate process.Special designed heater, can be adjusted upoto 400 C.Single Toggle type designed for highpressure. / Technical Data / Maximum Pressure / Impression Area3,000 kg120 x 180 mm / Max. Stamping Stroke 60 mm / Distance of Center / Max. Vertical Size / Voltage200 mm220 mm220 v / Power 1.5 kw / Working Table280 x 380 mm / Foil Rolling Device 0 - 200 mm / Machine Weight / Net Weight 260 kg / Gross Weight 450 kg / Machine Size ( xx ) (WxLxH) / Machine size / Packing Size85 x 70 x 160 cm105 x 90 x 180 cmAll technical data may be subject to deviations caused by the production process and shall therefore be interpreted to be only approximate data.Construction is subject to change without notice. The information provided herein is given according to our best knowledge and experience as of the date of this document, but NOREPRESENTATION, GUARANTEE OR WARRANTY, EXPRESS OR IMPLIED IS MADE AS TO THE ACCURACY, RELIABILITY OR COMPLETENESS OF THE INFORMATION OR TOANY SPECIAL QUALITY OR FITNESS OF THE PRODUCTS FOR A SPECIAL APPLICATION. This information does not release our customer from his own liability for care examinationof any fitness of the machine for his special application. Execution of machinery due to CE standards. This machine information (issue: 09/2004) supersedes all previous issues.All supplies and services of LEONHARD KURZ GmbH & Co. KG shall exclusively be subject to our Terms and Conditions for the Sales of Machines and Machine Spare Parts to BusinessCustomers May 2003 edition (T&C) as well as the Technical Specification (TS) of the respective machine. You may find the T&C on our homepage www.kurz.de. On request we willprovide you with a paper copy of the T&C and TS. © KURZ 2004 Hong KongKURZ-Forward Co. Ltd. Tel. : +852 2880 9083 Fax : +852 2880 9422 Email:sales@kfcl.hk China Shenzhen Tel. : +86 755 2660 8243 Fax : +86 755 2660 9273 Shanghai Tel. : +86 21 5407 1333 Fax : +86 21 5407 1705 Beijing Tel. : +86 10 6641 7790 Fax : +86 10 6641 0087 2007 80040.01.ES/07.07