Ocean Dresser instructions - Mamas & Papas

FITTINGSA x 20 B x 20Cam studsC x 20CamsD x 6Long screwsE x 12HandlesF x 8Handle screwsG x 24Drawer runners 4x left & 4x right hand versionsH x 10ScrewsI x 1Short boltsJ x 8Allen keyK x 8Rail insertsL x 1Long boltsTOOLSScrewdriverFitting code: 000000000000Cross head screwdriverImportant: The use of powered screwdrivers is not recommended for assembling this product.--

ASTEP 1Screw twelve cam studs(A) into the two widedrawer fronts (1) using across head screwdriver.Screw eight cam studsinto the left (2) and right(3) narrow drawer fronts.312STEP 2Slot the eight left (4) andright (5) drawer sidesonto the drawer fronts.Ensure the grooves in thedrawer sides are alignedwith the grooves in thedrawer fronts.Insert sixteen cams (B)into the holes in thedrawer sides, ensure thearrows on the heads ofthe cams face the drawerfronts.Turn the cams clockwisewith the screwdriver (L)to attach the sides to thedrawer fronts.4B5--

6BSTEP 3Slot the two drawersupports (6) onto thefronts of the wide drawerfronts.Insert four cams (B) intothe holes in the drawersupports.Turn the cams clockwisewith the screwdriver (L)to attach the supportrails.7STEP 4Insert the six drawerbases (7) into the groovesin the drawer sides.Push the bases down untilthey are fully inserted intothe grooves in the drawerfronts.--

CSTEP 5Slot the two widedrawer back (8) onto theassembled sections of thewide drawers as shown inthe diagram.Insert four long screws(C) into the middles ofthe drawer backs andtighten into the supportrails using a cross headscrewdriver.8CSTEP 6Fasten the side to thewide drawer backs usingeight long screws (C) anda cross head screwdriver.--

9CSTEP 7Slot the two narrowdrawer backs (9) onto theassembled sections of thenarrow drawers as shownin the diagram.Fasten the sides to thedrawer backs using eightlong screws (C) and across head screwdriver.EDSTEP 8Attach the six handles (D)to the drawer fronts usingthe twelve handle screws(E) and a cross headscrewdriver.--

STEP 9The drawers are now fullyassembled and should beput in a safe place awayfrom children.F10Step 10Attach a left and rightdrawer runner (F) to thecentre panel (10) usingsix screws (G) and a crosshead screwdriver.G--

H1111Step 11Attach the support rails(11) to the centre panels(10).Fasten the rails to thepanel using two shortbolts (H) and the allen key(I).I10FGStep 12Attach the drawer runners(F) to the left and rightside panels using eighteenscrews (G) and a crosshead screwdriver.1213--

STEP 13Attach assembled centrepanel to the right sidepanel, ensure that therunners on the centrepanel are the same wayround as those on theside panel.Slot the dowels on theends of the rails into theholes in the side panel.With one person holdingthe centre panel in place,slot two rail inserts (J)into the rails.Slot two long bolts (K)through the holes in therail inserts.Tighten the bolts into theside panel using the longend of the allen key (I).JKI14HSTEP 14Slot the top (14) onto theside panel.Fasten the centre panel tothe top using two shortbolts (H) and the allen key(I).I-10-

13STEP 19Slot the right side panel(13) onto the assembledsections.Fasten the top to the sidewith three short bolts (H)using the allen key (I).Slot four rail insert (J)into the support andbottom rails.Slot four long bolts (K)through the holes in therail inserts and tighteninto the side panel withthe allen key (I).KJHIISTEP 20With the help of anotherperson, turn theassembled dresser theright way up.Extend the drawerrunners from inside thedresser and lower oneof the large drawersonto the bottom set ofrunners.Slide the drawerbackwards whilst holdingthe runners in place, inorder to slot the hookon each runner intothe relevant hole in thedrawer back.Slot the drawer runnerknob at the front of eachrunner into the hole in theunderside of the drawersides, see diagram.Repeat this procedure forthe other drawers.-13-

INSTRUCTIONS FOR SAFE USE & maintenance• WARNING: DO NOT LEAVE YOUR CHILD UNATTENDED. The safety of your child is yourresponsibility.• Before use, ensure the dresser is on a stable, level surface.• Do not allow children to climb on the dresser.• Never use the dresser if any parts are broken or missing.• Never pivot or drag the dresser on its feet, the dresser must always be lifted by at leasttwo people when moved.• Do not place the dresser in the near vicinity of open fires or other sources of strong heat,such as electric or gas fires.• Always leave the dresser clean and dry. Wipe away any spillage straight away. The dressercan be cleaned with a damp cloth. Never use abrasive, bleach or strong detergents.• Check regularly that all fittings and screws are correctly tightened and are notdamaged. Loose screws can pinch parts of the body and clothing resulting in the risk ofstrangulation.• A changing mattress is not supplied with this product. We recommend that you only usea Mamas & Papas changing mattress with the Ocean Dresser/Changer. Lay the changingmattress on the changing surface, within the retaining rails.• Wood is a natural product and as such one of its charms is occasional variation in colouror marking. These marks are not defects and do not detract from the strength orperformance of your dresser.Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown inthese instructions. We reserve the right to change the specifications of any product without prior notice.After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods pleasecontact Customer Care on: +44 (0)845 268 2000, or e-mail us at: customer.care@mamasandpapas.com.Visit our website at www.mamasandpapas.com for the latest product information.-15-