NS-289-5

GRIP-ITMEANS LONGER LASTING,IMPORTANT MAINTENANCEPEER’s GR Series10GRIP-IT bearings are ideal for bi-directional applications andcan replace both set screw locking and eccentric collar lockingbearings. Available in a full range of sizes, the new “GR” seriesself aligning bearings can be used in all standard cast iron,malleable and pressed steel housings making it a drop-inreplacement for your current bearing unit.8791 234561 Through hardened steel spherical outer ring2 Grease relubrication groove and oil holes3 Through hardened steel wide inner ring4 Special heat treated gripping “Fingers”5 Concentric split locking collar6 Torx ® style socket head cap screw7 Full contact metal shroud seals8 Metal slingers9 Anti-Rotation pin10 Standard load capacity steel ballsPEER’s GER SeriesPEER’s GR Series765412 10 389Replaces PEER’S popular SER series bearings. Cylindrical outerring with snap ring makes this ideal for conveyor and printingroller applications. Also available with non contact “Z” shieldsfor high speed, free-spinning applications.1 Through hardened steel spherical outer ring2 Machined groove with steel snap ring3 Grease relubrication groove and oil holes4 Through hardened steel wide inner ring5 Special heat treated gripping “Fingers”6 Concentric split locking collar7 Torx ® style socket head cap screw8 Full contact metal shroud seals9 Metal slingers10 Standard load capacity steel ballsPEER’s GER Series2