PS-79Ci PS-79Ci - Fellowes

sites.fellowes.com

PS-79Ci PS-79Ci - Fellowes

12AUTOAUTOAUTO1212AUTOAUTOA.G.ENGLISHModel PS-79CiB.C.12KEYA. SafeSense ® TechnologyB. Paper entryC. See safety instructionsD. CD/Card flapE. Pullout binF. CastersG. Disconnect power switchH. Paper trayI. SafeSense ® override switchJ. Power controlsK. Overheat (red)L. Bin open (red)M. Bin full (red)N. Paper jam (red)O. SafeSense ® indicator (yellow)P. Sheet capacity indicatorQ. Auto correcting button (blue)R. ReverseS. On/off (blue)T. ForwardD.E.J.CAPABILITIESWill shred: Paper, credit cards, CD/DVD’s, staples and small paper clipsWill not shred: Adhesive labels, continous form paper, transparencies, newspaper,cardboard, large paper clips, laminates, file folders, X-rays or plastic other than notedabovePaper shred size:Cross-Cut............................................................................5/32” x 1-1/2” (3.9 x 38mm)Maximum:Sheets per pass ........................................................................................................... 12*CDs/Cards per pass ....................................................................................................... 1*Paper width ......................................................................................................9”/230mm*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 4Amps; heavier paper, humidityor other than rated voltage may reduce capacity. Recommended daily usage rates:25–50 shredding passes per day, 25 credit cards; 10 CDs. 12 sheets per pass.Fellowes SafeSense ® shredders are designed to be operated in home and office environments rangingbetween 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.ADVANCED PRODUCT FEATURESF.P.TECHNICAL EXPLANATIONAUTOAUTOJam Proof SystemEliminates frustrating jams bypreventing overloads and poweringthrough misfed paper.Sheet capacity indicator tells youwhen you have too many sheets ortoo few to maximize productivityShredder will not operate when too manysheets are fed into paper entry (redlight). Reduce sheet quantity and refeedIf misfed, shredder will automaticallyadjust to power through or reverseout paperAUTOTECHNICAL EXPLANATION®TechnologyStops shredder immediately whenhands are too close to the opening.Shredder will stop automaticallyand indicator will light up whenhands are too close to the openingShredder will resume normaloperation when hands are nolonger near the openingFlashing indicator warns whenSafeSense ®technology has beenshut offSilentShred TechnologySilentShred noise qualityshreds without noisy disruptions.TECHNICAL EXPLANATIONSilentShred motorfeatures whisper-quiet,efficient shreddingperformance withoutthe noisy disruptions.AUTOAUTOI.H.AUTOQ.IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!• Keep away from children and pets. Keep hands away from paperentry. Always set to off or unplug when not in use.• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – awayfrom shredder openings. If object enters top opening, switch toReverse (R) to back out object.• Never use aerosol products, petroleum based lubricants or other flammableproducts on or near shredder. Do not use canned air on shredder.• Do not use if damaged or defective. Do not disassemble shredder. Donot place near or over heat source or water.• This shredder has a Power Disconnect Switch (G) that must be in the ON (I)position to operate shredder. In case of emergency, move switch to OFF (O)position. This action will stop shredder immediately.• Avoid touching exposed cutting blades under shredder head.• Rotate CD flap entry for shredding CDs/cards. Keep finger away fromCD hole.• Do not put foreign objects in paper entry.• The grounded socket-outlet shall be installed near the equipment and shall beeasily accessible.K. L. M. N. O.R. S. T.2


12AUTO12AUTO1212AUTOAUTO12AUTO12AUTO12AUTO1212AUTOAUTO1212AUTOAUTOBASIC SHREDDING OPERATIONPAPER OR CD/CARD123456Continuous operation:12-minute maximumNOTE: Shredder runs brieflyafter each pass to clear entry.Continuous operation beyond12-minutes will trigger20-minute cool down period.disconnect powerswitch in ON (I) position.Press ( ) ON toactivate (blue)Feed into paperentry and releaseTo shred CDs rotateCD flap into placeHold CD/card at edge,feed into CD/Card flapentry and releaseWhen finishedshredding setto Off ( )JAM PROOF SYSTEM OPERATIONEliminates frustrating jams by preventing overloads and powering through misfed paper.SET-UP AND TESTINGMISFED PAPER2323AUTO1If too many sheets, indicator willlight up to red and shredder willnot take paperRemove several sheets until theindicator is below red and theshredder will take the paper1Automatic correcting actionwill power through the misfedpaper, so shredding cancontinueMisfed paper can also beaddressed by manually usingforward and reverse (SeeMaintenance & Troubleshooting)AUTOAUTOFeed into paper entryand release23If paper is misfed andstops shredding23Shredder will take fewer sheets,but if indicator is below yellow,you can add more sheets withoutfear of jammingIncrease the number of sheetsbeing fed up toAUTOthe top yellow lightto maximize your productivityIf there is too much paper forthe shredder to power through,it will reverse the paper out foreasy removalReduce paper quantity to anacceptable amount and refeed intopaper entryAUTOAUTOSAFESENSE ® TECHNOLOGY OPERATIONStops shredder immediately when hands are too close to the opening.SET-UP AND TESTING1FLASHING INDICATOR2 3 1 23is deactivated whenTurn the shredder ON Touch test area andSafeSense ®is active andSafeSense ®( ) to activate SafeSense ® look for the SafeSense ®working properlyindicator is flashingindicator to illuminateShift override switch tothe “active” position,reactivating SafeSense ®Confirm the indicator is no longerflashing and retest by puttingyour hand on the test area


12AUTO12AUTO12AUTO12®AUTOAUTO12AUTOADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTINGENGLISHModel PS-79CiBASIC PRODUCT MAINTENANCE AND TROUBLESHOOTINGCLEANING AUTO-START INFRARED SENSORSPaper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to runeven if there is no paper present (Note: two paper detection sensors are located in the center of the paper entry).JAM PROOF SYSTEMEliminates frustrating jams by preventing overloads and powering through misfed paper.TO CLEAN THE SENSORS1234DISABLING THE FEATURE2334356Lift CD flap.Locate Auto-startinfared sensor.Dip cotton swab inrubbing alcohol.Using cotton swab, wipeaway any contaminationfrom the paper sensors.AUTOShould you choose to disablethe system, press and holdthe auto button (blue) andreverse ( ) key at thesame timeDISABLING THE FEATUREAUTOOnce disabled, the blueAuto light is no longerilluminated (To re-engage,repeat step 1)Shredding can continue withthe system disabled, howevera paper jam may occur withtoo many sheetsSAFESENSE ® TECHNOLOGYStops shredder immediately when hands are too close to the opening.AUTOIf jam occurs, press andhold forward ( ) key untilthe document is completelythrough the shredderIf not cleared, pressreverse ( ) briefly(repeat steps 4 and 5until shredded)If steps 4 and 5 do not clearjam, reverse paper all theway out, remove severalsheets and refeedPREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING• All cross cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and couldultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.• Run shredder once a day in reverse for 15 seconds to clear cutters• Empty wastebasket when bin full indicator light is illuminated using bag # 36052• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to theproblem, this model will require 20 minutes to cool down.1 2 34 35 6ACCESSORIESMaintenance is an important part of protecting your investment. Don’t forget oil and shredder bags.Should the SafeSense ®indicator stay lit withouttouching the openingThe shredder will simulatea jam and SafeSense ® willneed to be deactivatedTo deactivate, shift overrideswitch to the “not active“positionOnce deactivated, theindicator will flash andthe SafeSense ® featurewill not functionTo clear paper, pressand hold forward ( )key until paper isshreddedOnce the paper is cleared,reactivate the SafeSense ®feature (To re-engage,see Operations)Shredder oil – #35250PS-79Ci Shredderplastic bag – #36052PROBLEM STILL NOT SOLVED?Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-stepassistance and personal attention.• www.fellowes.com features an extensive on-line support section with a number of self-service options• Our customer service professionals are dedicated to resolve any of your issuesGo to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.45

More magazines by this user
Similar magazines