VirTis BenchTop Pro with Omnitronics™ - 8L - SP Scientific

VirTis BenchTop Pro with Omnitronics - 8LBenchtop Freeze DryerKey Features• Direct chamber, flask and/or rack drying capabilities.• PLC-based Omnitronics controller.• Choice of refrigeration system to meet various processrequirements.• Optional manifolds, racks and accessories available.Optional Components• Stoppering-Tainer (SC-1 Stainless Steel).• Stainless Steel Drum Manifold (18-Port).• Tree-Type Stainless Steel Manifold (8- or 12-Port).• Stainless Steel Vertical Manifold (12-Port).• Bulk Shelf Rack (Unheated or 35 °C Heated). \\• Vertical Acrylic Drum Manifold (8-or 12-Port).Note: Additional accessories, as well as flask adapters, glassware and othercomponents are available. Contact SP Scientific for more information.(BenchTop Pro 8L with optional tree-typemanifold and condensate pan kit shown).Performance SpecificationsLowest Condenser Temperature(°C) (50 Hz / 60 Hz) -72 / -75 -102 / -105Maximum CondenserCapacity (L) 8 8Maximum Ice CondensingCapacity in 24 hours (L) † 3 3Utility RequirementsXL ZL XL ZLWith Vacuum PumpApprox. Peak Heat Generated (BTU/h)Without Vacuum PumpApprox. Peak Heat Generated (BTU/h)3,500 4,5002,500 3,500(L/hour) † 0.13 0.13 XLMaximum Deposition RateElectrical RequirementsNumber ofCompressors 1 2Voltage‡ 100-120 208-230 200-240 100-120 208-230 200-240(VAC)CompressorHorsepower 3/8 1/3, 3/8 Hertz 50, 60 60 50 50, 60 60 50SystemRefrigerant R245fa/R508B M089/R1150 Phase 1 1 1 1 1 1ZLAverage Vacuum Time to100 Millitorr (minutes)** 18 18Lowest SystemVacuum (mT)** ≤ 20 ≤ 20Note: Performance specifications are based on SP Scientific test data from unitsoperating at an ambient room temperature of approximately 20 °C. SP Scientificrecommends an operating range of 15-25 °C (59-77 °F).BreakerAmperage15 10 10 20 15 153538 Main Street, Stone Ridge, NY 12484 USA 845.255.5000800.431.8232 Fax: 845.687.7481 www.SPScientific.com

VirTis BenchTop Pro with Omnitronics - 8LBenchtop Freeze DryerDimensional DataMaterials of ConstructionWidth (in / cm) 15.5 / 39.4 Condenser Chamber 304Depth (in / cm) 28.5 / 72.4Condenser Chamber Cover /Adapter PlateAcrylicHeight (in / cm) 17 / 43.2 Condenser Chamber Gasket Neoprene Split-ringApproximate Weight(lb / kg)Condenser Inside Diameter(in / cm)131 / 59.4 Bulk Rack Shelves 304 Stainless Steel12 / 30.5 Drum Manifold Acrylic or 304 Stainless SteelAdditional Information Vertical and Tree-Type Manifolds 316L Stainless SteelConstruction Stainless Steel Condenser Drum Manifold Gasket Neoprene Split-ringVacuum Pump(required, not included)Two-Stage Rotary Vane Quickseal Body NeopreneDefrost Type Hot Gas Quickseal Knob PolypropyleneRefrigerant TypeCFC FreeCondenser TypeBottom External CoilStoppering-TainerDrum ManifoldTree-Type ManifoldVertical ManifoldBulk Shelf RackVertical Drum ManifoldSC-1 Stainless Steel18-Port StainlessSteel Drum Manifold8- or 12-Port StainlessSteel Manifold12-Port StainlessSteel Vertical Manifold3 Shelves; Unheatedor 35 °C Heated8- or 12-Port AcrylicDrum Manifold†The specified Maximum Ice Condensing Capacity in 24 Hours and Maximum Deposition Rate are based on the process of freeze-drying wateras aggressively as possible. The freeze dryer's ability to collect ice at an hourly rate or over a specified period will always be application dependent.** Vacuum specifications are based on SP Scientific test data from similar units equipped with an Leybold D2,5E two-stage rotary vanevacuum pump. Units equipped with other vacuum pumps may yield different results.‡NEMA plug type is selected at time of sale.\\35 °C heated bulk shelf rack is available with a 12-port acrylic drum manifold only.Copyright © 2013 SP Scientific. All marks herein are used under license. All brand or product names mentioned may be trademarksor registered trademarks of their respective companies. SP Scientific reserves the right to change specifications without notice.Part Number 100007472Rev 001, 03/13