Reference list - Aker Solutions

akersolutions.com
  • No tags were found...

Reference list - Aker Solutions

Saga Fjordbase FloroLNG pressure vesselNorway, 2009go to "View"... "Header and Footer"Process fabrication solutionsto edit this textSlide 1 © 2010 Aker Solutions part of Aker


Process fabricationClient/ContractorProjectScope descriptionCompleteAker SolutionsGjoaAccoustic dampers2010FramoFusaWet gas scrubber2010BorregaardBorregaardSteam accumulator2010ProsernatOseberg D3rd stage recompressor suction scrubber2010Fabricom SuezSnorreProduced water degassing drum2010Fabricom SuezOrmen LangeUPS B subsea enclosure, UPS A subsea enclosure,Pump VSD subsea enclosure2009Aker SolutionsOrmen LangeSusea inlet comp. separator2009Maersk O&GHalfdan BInlet separator2009Saga FjordbaseFloro500m 3 LNG storage tank2008Aker SolutionsSkarvFuel gas scrubber, 2 export comp. suction scrubbers,injection compression scubber, glycol compression scrubber,4 recompressor suction scrubbers2008Aker SolutionsGjoaFuel gas scrubber, export compression scrubberTEG contactor inlet scrubber, LP comp. suction scrubber,recompression scrubbers, separators2008ProsernatValhallTEG contactor2008StatoilMongstadFractional auxiliary treatment tower2008go to "View"... "Header and Footer"to edit this textSlide 2 © 2010 Aker Solutions part of Aker


Copyright and disclaimerCopyright of all published material including photographs, drawings and images in this document remains vested inAker Solutions and third party contributors as appropriate. Accordingly, neither the whole nor any part of this documentshall be reproduced in any form nor used in any manner without express prior permission and applicableacknowledgements. No trademark, copyright or other notice shall be altered or removed from any reproduction.This Presentation includes and is based, inter alia, on forward-looking information and statements that are subject torisks and uncertainties that could cause actual results to differ. These statements and this Presentation are based oncurrent expectations, estimates and projections about global economic conditions, the economic conditions of theregions and industries that are major markets for Aker Solutions ASA and Aker Solutions ASA’s (including subsidiariesand affiliates) lines of business. These expectations, estimates and projections are generally identifiable by statementscontaining words such as “expects”, “believes”, “estimates” or similar expressions. Important factors that could causeactual results to differ materially from those expectations include, among others, economic and market conditions inthe geographic areas and industries that are or will be major markets for Aker Solutions’ businesses, oil prices, marketacceptance of new products and services, changes in governmental regulations, interest rates, fluctuations in currencyexchange rates and such other factors as may be discussed from time to time in the Presentation. Although AkerSolutions ASA believes that its expectations and the Presentation are based upon reasonable assumptions, it can giveno assurance that those expectations will be achieved or that the actual results will be as set out in the Presentation.Aker Solutions ASA is making no representation or warranty, expressed or implied, as to the accuracy, reliability orcompleteness of the Presentation, and neither Aker Solutions ASA nor any of its directors, officers or employees willhave any liability to you or any other persons resulting from your use.Aker Solutions consists of many legally independent entities, constituting their own separate identities. Aker Solutionsis used as the common brand or trade mark for most of these entities. In this presentation we may sometimes use“Aker Solutions”, “we” or “us” when we refer to Aker Solutions companies in general or where no useful purpose isserved by identifying any particular Aker Solutions company.go to "View"... "Header and Footer"to edit this textSlide 3© 2010 Aker Solutions part of Aker

More magazines by this user
Similar magazines