/ 1GEIAVPLT: Single-gang AV Input Plate / 2GEIAVPLT ... - CIE-Group

Specification Sheet: SONET4• SONET4: Cat5 Audio Distribution System -4 in / 4 outThe highly successful ‘Sonet’ Sound-over-Ethernet System hasbeen designed to simplify and speed up installations where multiplemicrophone or line level inputs need to be situated a distance fromthe amplifier equipment.Types of installation include churches, schools, theatres and corporateboardrooms.This extremely versatile and cost effective installation device removesthe need for multiple cable runs from remote audio inputs to theamplifier equipment. The SONET4 System can transmit up to fourmicrophone or line level signals down one screened Cat5e cablefor up to 1000m.Each input and output can be independently configured for balancedor unbalanced signals as well as line level or microphone level. Thereis also an option to provide phantom power to the microphone inputsindependently.Each unit fits neatly into a standard UK double-gang back box andonly requires a power supply at the output or amplifier end (PSUsupplied as part of system).Features:• Reduces installation time• Up to 1000m between Input and Output plates achievable• Very high interference immunity• Balanced or unbalanced inputs & outputs• Line or Microphone level inputs & outputs• Phantom power (max. 15v DC)• Four XLR sockets on standard 2 gang plates• No power required at input module• Power Supply included as part of systemLinked viaCat5 cableUp to 1000mPlease Note:• When using Cat5 UTP (unshielded) cable, the So.Net system is onlycapable of transferring up to 3 channels. STP (shielded) Cat5 cable willallow for the maximum 4 channels.Specifications:Input Module:PowerGroundInputs x 4MIC/LINE inPhantom PowerMIC ImpedanceMIC Level InputLINE ImpedanceLINE Input LevelCat5 TerminationOver Cat5 cableOver Cat5 cable screen (or spare pair)Balanced XLR femaleSelectable by jumper15v jumper selectable600W10mv RMS50kW700mv RMS (1.5v RMS max)Screw terminalsOutput Module:Power Requirements24v DC @ 100mA (regulated linear power supply recommended)Outputs x 4Balanced XLR maleMIC/LINE OutSelectable by jumperMIC Out Impedance600WMIC Level Output 20mv RMS (into 600W)LINE Out Impedance20kWLINE Level Output 700mv RMS (into 20K)4 x MIC/LINE SignalsAmplifier / MixerLINE OutGeneral:ChannelsFour, individually configurableBandwidth100Hz ~ 20kHz (-3dB)Crosstalk>60dBSignal to Noise Ratio>60dBso.net INPUT plateStandard singleCat5 cable(up to 1000m)so.net OUTPUT platePSUCable SpecCable LengthScreened Cat5e cable (UTP can be used, but one pair required forground,meaning only three channels would be available)1000m maximumCat5 TerminatorsScrew terminalsProtected against short circuit on Cat5 cable to groundCIE-Group Widdowson Close Blenheim Ind Est Bulwell Nottingham NG6 8WB EnglandT: +44(0)115 9770075 F: +44(0)115 9770081 E: info@cie-group.com W: www.cie-group.com