AC150-PRO

powerseurope.com
  • No tags were found...

AC150-PRO

(EN) – AC150-PROWhich mortar can be used in the rainwith a Hilti ® tool?ChemicalAnchorsAC150-PRO


AC150-PRO: mortar that can be used in the rainwith a Hilti ® toolAvailable rangeETA option 7 for threadedrods M8-M16Approved for waterfilled holes (rain onthe jobsite!)Also fitting Hilti ®MD2000 and MD2500cartridge gunsApproval valid whenusing standard traderods and rods fromother manufacturersAC150-PRO 385MLVinylesterFitting standard Powers ® and Hilti ® gunsAC150-PRO 585MLVinylesterFitting standard Powers ® and Hilti ® gunsAC150-PRO 1400MLVinylesterFitting standard Powers ® and Hilti ® gunsACCESSORIESApproved for 4 basematerial temperaturerangesLonger shelf life:18 monthsRobust and solidcartridgeInstallation up to -5˚CapprovedApprovals and test reports080756-CPD-0245EUROPEAN TECHNICAL APPROVALETA-08/0378 - ETAG 001 - option 7FIRERESISTANCEF 120Suitable base materialsInstallation instruction124x34x44x1. 567 8 910e.g.20°C11Phefmin.10 cm45 min+31 (0)888-POWERS (769 377) www.powerseurope.nlCopyright © 2011 Powers Fasteners Europe. All rights reserved.


AC150-PRO: Technical dataInstallation and loading data, uncracked concrete, ETA-08/0378M8 M10 M12 M16Nominal drill diameter (threaded rods) d 0 (mm) 10 12 14 18Cleaning brush Ø threaded rods D max -D min (mm) 12 - 10,5 14 - 12,5 16 - 14,5 20 - 18,5Min. spacing / edge distance s min /c min (mm) 40 50 60 80Torque Tinst (Nm) 10 20 40 80Min. thickness member at h ef,min hmin (mm) 100 100 100 115Min. thickness member at h ef,max hmin (mm) 125 150 175 230Ø clearance hole in fixture df (mm) ≤ 9 12 14 18Min. eff. anchorage depth h ef,min (mm) 60 60 70 80Dry concreteDesign Load at h ef min, 8.8 threaded rod, C20/25 Tension N Rd (kN) 9,2 11,5 13,9 20,1Design Load at h ef min, 8.8 threaded rod, C20/25 Shear V Rd (kN) 12,0 18,4 27,2 48,2Water filled drill holesDesign Load at h ef min, 8.8 threaded rod, C20/25 Tension N Rd (kN) 9,2 11,5 13,9 15,6Design Load at h ef min, 8.8 threaded rod, C20/25 Shear V Rd (kN) 12,0 18,4 27,2 37,5Max. eff. anchorage depth h ef,max (mm) 95 120 145 190Dry concreteDesign Load at h ef max, 8.8 threaded rod, C20/25 Tension N Rd (kN) 14,6 23,0 28,9 47,8Design Load at h ef max, 8.8 threaded rod, C20/25 Shear V Rd (kN) 12,0 18,4 27,2 50,4Water filled drill holesDesign Load at h ef max, 8.8 threaded rod, C20/25 Tension N Rd (kN) 14,6 23,0 28,9 37,1Design Load at h ef max, 8.8 threaded rod, C20/25 Shear V Rd (kN) 12,0 18,4 27,2 50,4Setting timeTemp. GEL SET dry SET wet–5° C 90 min 24 h 48 h0° C 45 min 12 h 24 h+5° C 25 min 5 h 10 h+10° C 15 min 1,5 h 3 h+20° C 6 min 45 min 90 min+30° C 4 min 25 min 50 min+35° C 2 min 20 min 40 min+40° C 1,5 min 15 min 30 min+31 (0)888-POWERS (769 377) www.powerseurope.nlCopyright © 2011 Powers Fasteners Europe. All rights reserved.


AC150-PRO range overview385ml 585ml 1400mlAC150-PRO – styrenefree vinylester anchor, incl. 1 mixing nozzleType | Art. Nr. |AC150-PRO 385ML 08491 1 10AC150-PRO 585ML 08496 1 15AC150-PRO 1400ML 08497 1 5One meter mesh sleevesType | Art. Nr. |MS121000 23205 1MS161000 23210 1MS201000 23215 108482 08450 08492, 08500, 08502, 08504AC150-PRO mixing nozzle and extensionType | Art. Nr. | L [mm]NOZZLE-BLACK-14 08482 10NOZZLE-WHITE-18 for AC150-PRO 1400ML 08450 10EXTENSION-200MM 08492 10EXTENSION-200MM 08492 10 200EXTENSION-500MM 08500 10 500EXTENSION-1000MM 08502 1 1000EXTENSION-2000MM 08504 1 200031185 08458 31190AC150-PRO cartridge gunsType | Art. Nr. |CG585PRO (385+585ML) 31185 1CGBAT585 (385+585ML) 08458 1CG1400 BAZOOKA (1400ML) 31190 1Blow pumpType | Art. Nr. |BLOW PUMP 23305 1233272330523325Steel brushes with SDS-extensionType | Art. Nr. |BRSDS CONNECTOR 23325 1 20BRSDS EXTENSION 23327 1 20BRSDS 12MM 23330 1 10BRSDS 14MM 23335 1 10BRSDS 16MM 23340 1 10BRSDS 18MM 23345 1 10BRSDS 20MM 23350 1 10BRSDS 22MM 23352 1 10BRSDS 26MM 23355 1 10BRSDS 30MM 23360 1 10BRSDS 34MM 23365 1 10BRSDS 37MM 23370 1 10BRSDS 40MM 23375 1 10Plastic sleevesType | Art. Nr. |PSM8-50 08472 10PSM10-M12-85 08474 10PSM16-85 08478 10PSM-PRO plastic sleevesType | Art. Nr. |PSM-PRO 13x100 08470 10PSM-PRO 15x100 08471 10Threaded rods – zinc plated class 5.8 steelType | Art. Nr. |CHMANSTD-M8110 32100 50 500CHMANSTD-M10140 32110 50 500CHMANSTD-M10190 32120 50 200CHMANSTD-M12165 32130 25 100CHMANSTD-M12220 32140 25 100CHMANSTD-M16160 32150 20 80CHMANSTD-M16190 32160 10 40CHMANSTD-M16230 32170 10 40CHMANSTD-M20260 32190 5 20CHMANSTD-M20290 32200 5 20CHMANSTD-M24300 32210 5 20Your Powers Dealer:Threaded rods – zinc plated class 8.8 steelType | Art. Nr. |STMRE865 06042 10 200STMRE1080 06043 10 200STMRE1290 06044 10 200STMRE12110 06045 10 200STMRE16115 06046 10 100STMRE20195 06047 5 50STMRE24210 06048 5 20+31 (0)888-POWERS (769 377)EN_BRO_AC150-PRO_401-1-1-1Art.Nr. 61228Powers cannot be responsible for any errors and reserves the right to make technical and range modificationswithout notice. No liability is accepted for printing errors and omissions. Powers terms and conditions apply.Copyright © 2011 Powers Fasteners Europe. All rights reserved.

More magazines by this user
Similar magazines