Part 2: Adjustment and Operation, Measured variable chlorine dioxide

1 Device Identification / Identity CodeD1C ADULCOMETER ® Controller Series D1C / Version ADWType of mountingControl panel installation 96 x 96 mmWall mountingOperating voltage0 230 V 50/60 Hz1 115 V 50/60 Hz2 200 V 50/60 Hz (only with control panel installation)3 100 V 50/60 Hz (only with control panel installation)4 24 V AC/DCMeasured variableD Chlorine dioxide (0...0.5 ppm; 0...2 ppm; 0...10 ppm; 0...20 ppm)Connection of measured variable1 Terminal, standard signal 0/4-20 mACorrection variable0 None2 Temperature (Pt 100) terminal for connection with sensor type CDP3 Temperature standard signal 0/4-20 mA in connection with sensor type CDP4 AutomaticFeed forward control0 None1 As standard signal 0/4-20 mA2 As frequency 0-500 Hz3 As frequency 0-10 HzControl input0 None1 PauseSignal output0 None1 standard signal 0/4-20 mA measured value2 standard signal 0/4-20 mA control variable3 standard signal 0/4-20 mA correction variable4 2 standard signal outputs 0/4-20 mA, freely programmablePower controlG Alarm and 2 limit value/timer relaysM Alarm and 2 solenoid valve relaysR Alarm relay and servomotor with feedbackPump control0 None2 Two pumpsControl characteristic0 None1 Proportional control2 PID controlLog output0 NoneLanguageD GermanE EnglishF FrenchI ItalianN DutchS SpanishP PolishA SwedishB PortugueseG CzechH HungarianD1C APlease enter the identity code of your device here!2