no water - EverBuild

everbuild.co.uk

no water - EverBuild

Paving Jointing Compound

n Simply brush into joints and compact

n Ready to use – no mixing

n Cement free – non staining

n Sets hard, won’t crack or wash out

n Resists weed and plant growth

n Totally weatherproof – unaffected by frost

n For all joints of 5mm wide and over

n Water permeable, allows water escape

Coverage Calculator

Joint

width

250mm x

250mm

Paving Dimension To Be Jointed

(with a joint depth of 25mm)

450mm x

450mm

Visit the GEO-FIX website and view the

GEO-FIX application Video.

600mm x

600mm

5mm 13.0m 2 22.0m 2 26.5m 2

6mm 11.0m 2 19.0m 2 22.0m 2

7mm 9.0m 2 16.5m 2 17.5m 2

8mm 7.8m 2 14.5m 2 16.5m 2

9mm 6.5m 2 12.0m 2 14.5m 2

10mm 5.8m 2 11.0m 2 13.0m 2

The above figures show the coverage for a 20kg pack being used.

Everbuild Building Products Ltd

Site 41, Knowsthorpe Way,

Cross Green Industrial Estate

Leeds LS9 0SW

Telephone: 0113 240 3456

Fax: 0113 240 0024

Email: info@everbuild.co.uk

Website: www.everbuild.co.uk

Everbuild Ireland

Unit D2A

Bluebell Industrial Estate

Dublin 12

Telephone: 01 450 8556

Fax: 01 450 3912

Email: info@everbuild.eu

Website: www.everbuild.eu

REVIVE YOUR

PATHS & PATIOS wITH

Paving Jointing Compound

USE ON PAVING, FLAGS, SLABS, COBBLES & STONE SETTS

BEFORE

AFTER

NO

MIXING

SIMPLY BRUSHES

INTO JOINTS


BEFORE AFTER

Paving Jointing Compound

Reviving and restoring paths, patios, & paving in your

garden has a dramatic effect on the overall look of your

garden and house – now you can renew the joints quickly

and permanently with Geo-Fix Paving Jointing Compound.

Used by Landscaping Contractors for over 15 years

Geo-Fix is now available to the Gardening & DIY markets in a

easy to use, ready mixed pack.

Geo-Fix is ideal for both restoring the joints on existing paving,

or for laying new paving and is available in Buff and Grey

colours in 20 and 10 kilo pack sizes – see reverse of leaflet for

coverage guide.

Easier & Faster

GEO-FIX is ready mixed and can simply be brushed into joints

with minimal effort compared to using traditional wet mortar.

Better

Because GEO-FIX is cement free and applied dry it does not

leave unsightly cement stains which are difficult to remove.

Additionally, GEO-FIX is totally resistant to freeze, thaw cycles,

it forms a solid joint that resists weed and plant growth yet is

water permeable.

Geo-Fix can be used on all types of paving, flags, slabs,

cobbles and stone setts providing there is a minimum joint

width of 5mm and a minimum depth of 25mm.

3NO CEMENT 3NO WATER 3NO MESS

How to use Geo-Fix ®

Step 1

Thoroughly rake out all the

existing joints, removing all

weeds and plant growth,

including roots.

If Moss or Mould is present

treat whole area with Everbuild

Moss Away, ALLOW TO DRY

THOROUGHLY FOR 48 HOURS

BEFORE PROCEEDING,

SURFACES & JOINTS MUST

BE TOTALLY DRY BEFORE

APPLYING GEO-FIX.

Step 3

Using a soft brush, push the

Geo-Fix compound into the

joints at a 45° angle.

Note: For New Build

Applications lay paving

according to paving

manufacturers instructions,

then start at Step 2.

Step 2

Carefully open the vacuumpacked

bag and sprinkle

Geo-Fix over the area to be

joined. Work in small areas of

approx 2-3 square metres at a

time. Once open the entire bag

must be used within one hour.

Step 4

Firmly compact Geo-Fix with a

pointing tool, refill and repeat

ensuring a fully compacted &

topped joint. Firm compaction

is the key to the successful

laying of Geo-Fix. Ensure

Geo-Fix is finished slightly below

the surface.

Step 5

After application, brush off

excess with a soft brush, taking

care not to brush out any

Geo-Fix from the treated area.

Geo-Fix will harden over a 2-3

hour period.

More magazines by this user
Similar magazines