Type 8205 Digital pH–Transmitter - Temp-Press Inc

temppress.com

Type 8205 Digital pH–Transmitter - Temp-Press Inc

8205Digital pH–TransmitterTechnical data – pH electrodeThe pH-transmitter is available with flat glass type electrode as standard. This design provides an extra barrier against reference side contaminations. Also,it allows the electrodes to be used in applications where sulfides, mercaptans, heavy metal ions and similar materials are present. In the remote versions,the top of the electrode body has the quarter turn, quick disconnect BNC connector and the leak–tight O–ring seals. All replacement electrodes are suppliedcomplete with O–rings. The service life of the pH-electrode depends on the application. Electrode in the Type 8205 can easily be replaced.Operation and displayThe operation of the pH-transmitter is divided into the following 3 different menus:Main Menu– pH– Temperature– Output current– HOLD function– pH–electrode calibrationTransmitter 8205 Operating ElementsCalibration Menu– Language– Temperature units– Measuring range 4 – 20 mA– Relay parameter definition– Selection of temperature compensation(Pt1000 or manual)– Display or not of electrode voltage in main menu– Filter selectionDirection upwardsin menuDisplay selection andincreasing key (numericvalues) impulses orautomatic. Choice ofdigit value.Steps from 0 to 9Test Menu– Offset– Span– Temperature adjustment– Simulation of pH or temperature value– Display of instantaneous electrode voltageRelay Alarm: contactclosedDirection downwards in menu orsideways for digit selectionRelay 1: contact closed (base)Relay 2: contact closed (acid)Acceptance of chosen parameter or adjusted valuePage /13


8205Digital pH–TransmitterFittings Type S020 1/2" – 2" (DN 15–50) for transmitter 8205H3Variable Dimensions [mm]Port (DN) H1 H2 H31/2" (15) 163 177 1773/4" (20) 163 177 1771" (25) 163 177 1771 1/4" (32) 163 177 1771 1/2" (40) 164 178 1782" (50) 170 184 184Applicable for all Fitting Materials1/2"–2" (DN 15 – 50) Process Connections.Insertion fitting dimensions (for 8205 compact)Internal threadStainless steel (316L - 1.4404)or Brass (CuZn39Pb2)PDLANPTGRcOrifice P A D L[DN] [mm] [mm] [mm]/2" (15) 80.3 85.0 NPT /2 17.0G /2 16.0Rc /2 15.03/4" (20) 77.8 95.0 NPT 3/4 18.3G 3/4 17.0Rc 3/4 16.31" (25) 78.0 105.0 NPT 8.0G 3.5Rc 8.01 1/4" (32) 81.6 120.0 NPT 1 1/4 21.0G 1 1/4 23.5Rc 1 1/4 21.01 1/2" (40) 85.4 130.0 NPT 1 1/2 20.0G 1 1/2 23.5Rc 1 1/2 19.02" (50) 91.5 150.0 NPT 4.0G 7.5Rc 4.0External threadStainless steel (316L - 1.4404)or Brass (CuZn39Pb2)or PVC (only DN 6 and 8)PALDGOrifice P A D L[DN] [mm] [mm] [mm]/4" (6) 75.3 90.0 G 1/ 4.05/16" (8) 75.3 90.0 G 1/ 4.01/2" (15) 80.3 84.0 G 3/4 .53/4" (20) 77.8 94.0 G 3.51" (25) 78.0 104.0 G 1 1/4 14.01 1/4" (32) 81.6 119.0 G 1 1/2 18.01 1/2" (40) 85.4 129.0 M 55 x 9.02" (50) 91.5 149.0 M 64 x 0.0External threadStainless steel (316L - 1.4404)SMS1145PADOrifice P A D[DN] [mm] [mm]1" (25) 77.8 130 Rd40 x 1/6"1 1/2" (40) 81.6 164 Rd60 x 1/6"2" (50) 85.4 173 Rd70 x 1/6"Page /13


8205Digital pH–TransmitterInsertion fitting dimensions (for 8205 compact)Welding endsBS 4825/ASME BPEStainles steel (316L - 1.4404) EN ISO 1127 / ISO 4200SMS 3008HsAPOrifice P A Standard D s[DN] [mm] [mm] [mm] [mm]1/2" (15) 80.3 84.0 ASME BPE - -- - ISO 4200 21.30 1.60SMS 3008 - -3/4" (20) 83.3 84.0 ASME BPE 19.05 1.6577.8 94.0 ISO 4200 26.90 1.6083.3 84.0 SMS 3008 20.00 1.001" (25) 77.8 94.0 BS4825/ASME BPE 25.40 1.6578.0 104.0 ISO 4200 33.70 2.0077.8 94.0 SMS 3008 25.00 1.201 1/4" (32) 78.0 104.0 BS4825/ASME BPE 32.00 1.6081.6 119.0 ISO 4200 42.40 2.0078.0 104.0 SMS 3008 - -1 1/2" (40) 81.6 119.0 BS 4825 38.10 1.6585.4 129.0 ISO 4200 48.30 2.0081.6 119.0 SMS 3008 38.00 1.202" (50) 85.4 128.0 BS4825/ASME BPE 50.80 1.6591.5 149.0 ISO 4200 60.30 2.0085.4 128.0 SMS 3008 51.00 1.202 1/2" (65) 91.5 147.0 BS4825/ASME BPE 63.50 1.65- - ISO 4200 - -91.5 147.0 SMS 3008 63.50 1.60Tri-Clamp ®BS 4825/ASME BPE*Stainless steel ISO (for pipe EN ISO 1127 / ISO 4200)(316L - 1.4404) SMS 3017 / ISO 2852**Available with internal surface finish Ra=0.8μmPADD1D2Orifice P A Standard D2 D1 D[DN] [mm] [mm] [mm] [mm] [mm]1/2" (15) ASME BPE - - -80.3 130 ISO (for pipe ISO 4200) 18.1 27.5 34.0- - SMS 3017/ISO 2852 - - -3/4" (20) ASME BPE 15.75 - 25.077.8 150 ISO (for pipe ISO 4200) 23.7 43.5 50.580.3 - SMS 3017/ISO 2852 - - -1" (25) BS 4825/ASME BPE 22.1 43.5 50.578.0 160 ISO (for pipe ISO 4200) 29.7 43.5 50.577.8 129.0 SMS 3017/ISO 2852 22.6 43.5 50.51 1/4" (32) BS 4825/ASME BPE - - -81.6 180 ISO (for pipe ISO 4200) 38.4 43.5 50.5- - SMS 3017/ISO 2852 - - -1 1/2" (40) BS 4825/ASME BPE 34.8 43.5 50.585.4 200 ISO (for pipe ISO 4200) 44.3 56.5 64.081.6 161.0 SMS 3017/ISO 2852 35.6 43.5 50.52" (50) BS 4825/ASME BPE 47.5 56.5 64.091.5 230 ISO (for pipe ISO 4200) 55.1 70.5 77.585.4 192.0 SMS 3017/ISO 2852 48.6 56.5 64.02 1/2" (65) BS 4825/ASME BPE 60.2 70.5 77.5- - ISO (for pipe ISO 4200) - - -91.5 216.0 SMS 3017/ISO 2852 60.3 70.5 77.5Page /13


8205Digital pH–TransmitterDimensions [mm] – fittings 2 1/2" – 4" (DN 65 – 100) (for 8205 compact)Fusion spigotPE, PP, PVDFHDIA. H PE PP PVDFH1 H2 H1 H2 H1 H2[DN] [mm] [mm] [mm] [mm] [mm] [mm] [mm]2 1/2" (65)3" (80)4" (100)72.5 13.0 --- 13.0 --- 10.4 ---72.5 15.6 --- 15.6 --- 12.5 ---72.5 19.0 5.0 19.0 5 15.2 6H2H1ø39Welding tab with radiusStainless steel (316L - 1.4404) Orifice (DN) P [mm] R [mm]" (50) 56.55 30.15 1/2" (65) 54.52 36.653" (80) 53.07 44.454" (100) 50.71 57.15RØ27,6Ø33,6PSaddle– PVCBody material: PVC, Seal material: BUNAPORING SEALWEDGECLAMPDIA. D[mm] P[mm] D1[mm]2 1/2" (65) 129 115.0 75.03" (80) 144 119.0 90.04" (100) 163 107.0 114.0DD1Operation and displayA Compact Version of pH–transmitter Type 8205 Consists of Two Basic Units as Follows:– Fitting Type S020 1/2" to 2" (DN15 to DN50) or 1500/1501 2–1/2" to 4" (DN 65 to DN 100)– Compact pH–TransmitterpH–Transmitter Compact 4–20 mA Output, No Relays, Pt 1000 Temp Comp, 12 – 30 VDC; with 1/2" NPT Conduit DIN PlugDescription Electrode Gasket Item no.Compact pH–transmitter 8205 Flat Glass FKM US05294pH–Controller Compact 4–20 mA Output, with 2 Relays, Pt 1000 Temp Comp, 12 – 30 VDC; 2 x 1/2" NPT Conduit EntryDescription Electrode Gasket Item no.Compact pH–transmitter 8205 Flat Glass FKM US05295Page /13


8205Digital pH–TransmitterOrdering chart for insertion fitting S020 (for 8205 compact)Brass – T-fittingSpecificationItem no. / Orifice2"(DN 50)2 1/2"(DN 65)3"(DN 80)4"(DN 100)Carbon steel weldolet - (requires long finger sensor)Item no. / Orifice5"(DN 125)Weld tabs 418 111 418 112 418 113 418 114 418 115 418 116 418 117 418 756 720 070 416 637Carbon steel saddles – (requires long finger sensor)Item no. / OrificeSpecificationSpecificationSpecification2"(DN 50)3"(DN 80)4"(DN 100)5"(DN 125)6"(DN 150)US50B49 US50B32 US50B33 US50B34 US50B35 US50B36 US50B37 US50B38 TBD2"(DN 50)PVC – T-fittingSpecification2 1/2"(DN 65)3"(DN 80)4"(DN 100)6"(DN 150)Item no. / Orifice5"(DN 125)US50B61 US50C34 US50C35 US50B27 US50B28 US50B29 US50B30 US50B31 US50C558"(DN 200)6"(DN 150)8"(DN 200)Item no. / OrificeSeal10"(DN 250)8"(DN 200)10"(DN 250)12"(DN 300)12"(DN 300)10"(DN 250)14"(DN 350)14"(DN 350)12"(DN 300)PortconnectionStandards1/2"(DN 15)3/4"(DN 20)1"(DN 25)1 1/4"(DN 32)1 1/2"(DN 40)2"(DN 50)SealPortconnectionStandards1/2"(DN 15)3/4"(DN 20)1"(DN 25)1 1/4"(DN 32)1 1/2"(DN 40)2"(DN 50)2 1/2"(DN 65)Internal thread FKM NPT 428 718 428 719 428 720 428 721 428 722 428 723 ---G 428 712 428 713 428 714 428 715 428 716 428 717 ---Rc (ISO7) 428 724 428 725 428 726 428 727 428 728 428 729 ---External thread FKM G 428 730 428 731 428 732 428 733 428 734 428 735 ---Stainless steel – T-fittingSpecificationItem no. / OrificeSealPortconnectionStandards1/2"(DN 15)3/4"(DN 20)1"(DN 25)1 1/4"(DN 32)1 1/2"(DN 40)2"(DN 50)2 1/2"(DN 65)Internal thread FKM NPT 428 742 428 743 428 744 428 745 428 746 428 747 ---G 428 736 428 737 428 738 428 739 428 740 428 741 ---Rc (ISO7) 428 748 428 749 428 750 428 751 428 753 428 754 ---External thread FKM G 428 754 428 755 428 756 428 757 428 758 428 759 ---EPDM SMS 1145 --- --- 443 317 --- 443 318 443 319 ---Weld ends FKM EN ISO 1127/ISO 4200 --- 428 760 428 761 428 762 428 763 428 764 428 765EPDM BS4825 / ASME BPE --- 443 734 443 735 443 736 443 942 443 943 443 944SMS 3008 --- --- 443 309 --- 443 310 443 311 443 312Tri-Clamp® FKM EN ISO 1127/ISO 4200 --- 428 766 428 767 428 768 428 769 428 770 428 771EPDM BS4825/ASME BPE --- 443 965 443 966 --- 443 967 443 968 443 969SMS3017/ISO2852 --- --- 443 313 --- 443 314 443 315 443 316BS4825/ASME BPE* --- 443 970 443 971 --- 443 972 443 973 443 974SMS3017/ISO2852* --- --- 443 957 --- 443 958 443 959 443 960Flange FKM ANSI B16-5-1988 428 778 428 779 428 780 428 781 428 782 428 783 ---DIN 2633 428 772 428 773 428 774 428 775 428 776 428 777 ---JIS 10K 431 053 431 054 431 055 431 056 431 057 431 058 ---* internal surface finish Ra = 0.8 μmStainless steel – welding tab with radiusTrue union - solvent spigot FKM ASTM 428 682 428 683 428 684 428 685 428 686 428 687ISO 428 670 428 671 428 672 428 673 428 674 428 675JIS 429 078 429 079 429 080 429 081 429 082 429 083Solvent ends FKM ISO 428 676 428 677 428 678 428 679 428 680 428 681For Analysis:True union- solvent spigot FKM ISO 430 837 430 838 460 839 428 673 428 674 4428 675Page 10/13


8205Digital pH–TransmitterOrdering chart for insertion fitting S020 (for 8205 compact)PVC saddle – (long finger required for 6" & 8" saddle)Item no. / OrificeSpecification2"(DN 50)3"(DN 80)4"(DN 100)6"(DN 150)8"(DN 200)413 469 W 413 470 T US50B20 US50B17 US50B42PVC – Screw-on fittingItem no. / OrificeSpecificationItem no. / OrificeSealPortconnectionStandards9/16"(DN 6)3/4"(DN 20)1"(DN 25)1 1/4"(DN 32)1 1/2"(DN 40)2"(DN 50)Specification2 1/2"(DN 65)3"(DN 80)4"(DN 100)5"(DN 125)6"(DN 150)8"(DN 200)10"(DN 250)12"(DN 300)14"(DN 350)16"(DN 400)--- --- 418 170 418 170 418 170 418 170 418 170 418 170 418 170 418 170PP – T-fittingTrue union - solvent spigot FKM ISO 428 688 428 689 428 690 428 691 428 692 428 693Solvent ends FKM ISO 428 694 428 695 428 696 428 697 428 698 428 699For Analysis:True union- solvent spigot FKM ISO 430 840 430 841 460 842 428 691 428 692 428 693PP – Fusion spigot or Screw-on fittingItem no. / OrificeSpecification2 1/2"(DN 65)3"(DN 80)4"(DN 100)5"(DN 125)6"(DN 150)8"(DN 200)10"(DN 250)12"(DN 300)14"(DN 350)16"(DN 400)Fusion spigot 418 650 418 651 418 652 --- 418 653 418 654 418 655 418 656 418 657 ---Screw-on --- --- 436 488 436 488 436 488 436 488 436 488 436 488 436 488 436 488PVDF – T-fittingSpecificationItem no. / OrificePVDF – Fusion spigot or Screw-on fittingItem no. / OrificeSpecification2 1/2"(DN 65)3"(DN 80)4"(DN 100)5"(DN 125)6"(DN 150)8"(DN 200)10"(DN 250)12"(DN 300)14"(DN 350)16"(DN 400)SealPortconnectionStandards3/4"(DN 20)1"(DN 25)1 1/4"(DN 32)1 1/2"(DN 40)2"(DN 50)2 1/2"(DN 65)True union - solvent spigot FKM ISO 428 700 428 701 428 702 428 703 428 704 428 705Solvent ends FKM ISO 428 706 428 707 428 708 428 709 428 710 428 711For Analysis:True union- solvent spigot FKM ISO 430 843 430 844 460 845 428 703 428 704 428 705Fusion spigot 418 658 418 659 418 660 --- --- --- --- --- --- ---PE – Fusion spigot or Screw-on fittingItem no. / OrificeSpecification2 1/2"(DN 65)3"(DN 80)4"(DN 100)5"(DN 125)6"(DN 150)8"(DN 200)10"(DN 250)12"(DN 300)14"(DN 350)16"(DN 400)Fusion spigot 418 642 418 643 418 644 --- 418 645 418 646 418 647 418 648 418 649 418 598Screw-on --- --- 436 489 436 489 436 489 436 489 436 489 436 489 436 489 436 489Page 11/13


8205Digital pH–TransmitterOrdering data for remote pH systems (includes 25 ft. of cable for pH electrode)System as shown on first page, includes two 3 Amp Relays for High/Low alarm or ON/OFF control, 25’ of cable from pH sensor to transmitter, flatself flushing pH probe designed for longer life expectancy housed in a CPVC body. pH Probe connects to cable via quick BNC connector for easymaintenance and/or replacement. Nema 4 wall mounted or panel mounted transmitter, pH Simulation Mode, easy 2 point calibration with hold functionthus locking in existing plant conditions during calibration. All systems shown are 24VDC. 115–230 AC versions available for wall mount electronicsonlyType 8205 In Line pH–Transmitter System with Wall or Panel Mount ElectronicsDescriptionItem-NoWall Mount System3/4" NPT CPVC fitting, Temperature Compensated US50K703/4" NPT CPVC fitting, No Temperature Compensation US50K711" NPT CPVC fitting, Temperature Compensated US50K731" NPT CPVC fitting, No Temperature Compensation US50K742" NPT CPVC fitting, Temperature Compensated US50K762" NPT CPVC fitting, No Temperature Compensation US50K77Panel Mount System3/4" NPT CPVC fitting, Temperature Compensated US50K853/4" NPT CPVC fitting, No Temperature Compensation US50K861" NPT CPVC fitting, Temperature Compensated US50K881" NPT CPVC fitting, No Temperature Compensation US50K892" NPT CPVC fitting, Temperature Compensated US50K912" NPT CPVC fitting, No Temperature Compensation US50K92Type 8205 Submersion System with Wall or Panel Mount ElectronicsDescriptionWall Mount SystempH Submersion Kit, Temperature CompensatedpH Submersion Kit, No Temperature CompensationPanel Mount SystempH Submersion Kit, Temperature CompensatedpH Submersion Kit, No Temperature CompensationItem-NoUS50K82US50K83US50K97US50K98Type 8205 Wet Tap pH System with Wall or Panel Mount ElectronicsDescriptionItem-NoWall Mount System12" Insertion Wet Tap pH Wall Transmitter, Temperature Compensated US50K7912" Insertion Wet Tap pH Wall Transmitter, No Temperature Compensation US50K80Panel Mount System12" Insertion Wet Tap pH Wall Transmitter, Temperature Compensated US50K9412" Insertion Wet Tap pH Wall Transmitter, No Temperature Compensation US50K95Remote pH electronics onlypH–Transmitter Panel Mounted Version; 4–20 mA OutputDescription Relay output Cable connection Power supply Item–NoPanel mounted Transmitter 8205 no terminals – 30 VDC 427 937 HPanel mounted Transmitter 8205 2 x relay terminals – 30 VDC 427 938 JpH–Transmitter Wall Mounted Version; 4–20 mA OutputDescription Relay output Cable connection Power supply Item–NoWall mounted Transmitter 8205 no 5 x PG 9 – 30 VDC 427 944 QWall mounted Transmitter 8205 2 x relay 5 x PG 9 – 30 VDC 427 945 RWall mounted Transmitter 8205 no 5 x PG 9 5 – 230 VDC 427 949 VWall mounted Transmitter 8205 2 x relay 5 x PG 9 5 – 230 VDC 427 950 SPage 12/13


8205Digital pH–TransmitterOrdering chart for pH electrodesReplacement pH electrodesItem noCompact mountUS61245INLIINE ststem3/4" INLINE US616231" INLINE US079562" INLINE US07813Submersion systemUS61628Wet tap systemUS61979In case of special application conditions, We reserve the right to make technical 0703/2_US-en_1000082474please consult for advice.changes without notice.Page 13/13

More magazines by this user
Similar magazines