Data sheet RNC series - MAHLE Industry - Filtration

Cartridge Filter HousingsNowata RNC SeriesMulti-Purpose, High Flow Filters for Industrial Service1. IntroductionDesigned for a broad range of filtration applications, the RNC seriescartridge filter housings are multipurpose, high flow, 150 psifilter vessels for general industrial service. These versatile housingsaccept 10, 20, 30 or 40 inch long cartridges which permit multipleoptions for housing flow rates. All RNC series cartridge housingsare designed for non-code service.The RNC series cartridge filter housings are designed for use inmany industrial applications which include food, water, beverage,power generation and general industrial uses. Contact your localrepresentative for assistance with your application.EMPTYEMPTYFeaturesAccepts SOE flat closed end, SOE fin closed end or DOEstyle filter cartridges.Accepts Seven, 10”, 20”, 30”, or 40” cartridges allowingfor a broad range of flow rates.7 around design provides longer cartridge life with lowerpressure drop.V-Clamp closure allows quick, easy cartridge changeout.316 stainless steel material of construction for maximumcorrosion resistance. (304 stainless steel also available).Maximum operating pressure up to 150 psig (10.3 bar)at 77 °F (25 °C) (Only for liquid service, not suitable forapplications with compressed natural gas).EPDM o-ring is standard. Other options are available.150# ANSI raised face Inlet and Outlet connections arestandard.2” MPT standard inlet and outlet.1/4” NPT vent and 3/4” MPT drain.Standard finish: Mechanical polish, as shown.Optional feature: Electropolished finish.

2. Dimensional InformationLiquidApprox. Clearance forModel FlowCartridgeA B C DWeight CartridgeNumber RateDiameter(lbs) Removal(gpm)*RNC7 to 35 23.25 11.19 5.08 12.69 2.75 31 30RNC14 to 70 33.25 11.19 5.08 12.69 2.75 40 50RNC21 to 100 43.25 11.19 5.08 12.69 2.75 49 70RNC28 to 100 53.25 11.19 5.08 12.69 2.75 55 90.Dimensions shown in inches unless otherwise noted. (* Flow rate is dependant upon fluidviscosity and allowable pressure drop.) Specifications are for reference only and subjectto change without notice. Dimensions are approximate values and not intended for pipingspecifications.NOTES:*1 = Vent*2 = V-Band clamp*3 = Knob*4 = Tie rod*5 = Drain*6 = Head*7 = O-ring*8 = Bottom seat plateEMPTY3. Typical Model NumberEMPTYEXAMPLE............. RNC 14 S 4 15 2 N E EPTypeRNC SeriesNumber of 10 inch equivalents7, 14, 21, 28Material of constructionA = 304 stainless steelS = 316 stainless steelCartridge lengthEMPTY1 = 10 inches3 = 30 inches2 = 20 inches4 = 40 inchesPressure rating15 = 150 psiInlet / Outlet connection size2 = 2 inchesConnection styleEMPTYN = MPTF = FlangeO-ring materialEMPTYE = EPDM (standard)N = NitrileS = SiliconeOptionsEP = ElectropolishEMPTYEMPTYMAHLE Industrial Filtration USA, Inc.428 N. Elm, PO. Box 678, Nowata, OK 74048, Phone +1 (800) 259-2204, Fax +1 (918) 273-2101industrialfiltration@us.mahle.com, www.mahle-industrialfiltration.com08/2011Cartridge Filter Housings, Nowata RNC Series 2