GEZE TS 4000 E - Safelincs

GEZE TS 4000 EOverhead door closer with electrohydraulic hold-openaccording to EN 1155, closing force size 1-6Product features Closing force size EN 1-6 adjustable Closer in only one construction size Optical power size indicator Thermo constant closing speed adjustable at front Latching action adjustable via link arm Infinitely variable hold-open angle between 80 0 and 180 0 Operating voltage 24 V DC Low power consumption approx. 1 Watt Same fitting hole pattern as all GEZE TS 4000 closers58118584516,5605040453538449846135160325Fig. 20-1GEZE20

Application range For single-action doors up to 1400 mm Can be used for right and left hand doorswithout adjustment For smoke and fire-proof doorsStandard version/packageOverhead door closer GEZE TS 4000 Efor standard mounting, 24 V DC, completewith mounting material and installation template(mounting plate not included); still needed: link arm GEZE TS 4000 E / transom mounting 24 V DC(on smoke and fire-proof doors only permitted if transommounting has been approved for the respective door inthe official approval certificate)SpecificationsOverhead door closer GEZE TS 4000 E 24 V DCfor mounting on smoke and fire-proof doors,with electrohydraulic hold-open deviceinfinitely variable between 80 0 and 180 0 as per EN 1155,closing force EN size 1-6 and closing speedadjustable at front,with visual size indicator,standard type of installation: door mount / hinge side,also available with optional mounting plate.Finish:( ) silver( ) RAL ...Electrical installationThe GEZE TS 4000 E has to be connected to a 24 V DCdirect voltage supply to allow the door to be held open.Function Voltage applied to closer = door held open No voltage applied or switched off = door not held open,door closes automatically The door can be closed manually at any time regardlessof wheather or not voltage is being appliedElectrical dataM4 orø 5x30deep formountingwithdowel plugFig. 21-1 Operating voltage 24 V DC ±10% Connected load 45 mA Max. permissible residual ripple 20% Enclosure rating IP 43 (for interior use only)Power supply cable, standard mountingThe power supply cable can be either surface-mountedor flush-mounted, see Fig. 21-18537ø20Power is supplied from the terminal box to the closer viaa cable with a threaded circular connector.To prevent the closer, terminal box, and cable from beingdamaged, the terminal box has to be mounted within thearea shown on the illustration, see Fig. 22-1Fig. 21-2Power cable supply, transom mountingThe power supply cable to the closer is flush-mounted.The cables are connected to special terminals in thecloser, see Fig. 21-221GEZE

ca. 300max. 95Threaded holes M5222±1 45±0,245±0,2Threaded holes M5222±165±142±0,516±0,216±0,242±0,565±1100 +1067983975Fig. 22-1Mounting on hinge side / doormountExample showing the mounting ofGEZE TS 4000 Ewith mounting plateto a fire-proof door, see Fig. 22-1Mounting plate, 5 mm deep,drill-hole pattern to DIN EN 1154appendix 1, for doors wheredirect mounting is not possible,see Fig. 22-2Mounting dimensionsfor left closing door, see Fig. 22-3for right closing door, see Fig. 22-4Fig. 22-230ø2013,5705816±0,1 35hinge sideDIN right160±0,1135±0,131±0,132514,5DIN leftø8 ø11135±0,118±0,1160±0,1844±0,135 16±0,1(60)142±1160±0,2160±0,2142±1DIN leftDIN rightFig. 22-3 Fig. 22-4GEZE22

565±1 16±0,26798397AFig. 23-1Transom mounting / oppositehinge sideExample showing the mounting ofGEZE TS 4000 Ewith mounting plateto a fire-proof door, see Fig. 23-1For smoke and fire-proof doors,the lintel depth A should notexceed 70 mm.30ø2013,5705816±0,1 35hinge sideDIN right160±0,1135±0,131±0,114,5DIN leftø8 ø11135±0,118±0,1160±0,1325844±0,116±0,135(60)Mounting plate, 5 mm deep,drill-hole pattern to DIN EN 1154appendix 1, for doors wheredirect mounting is not possible,see Fig. 23-2Mounting dimensionsfor right closing door, see Fig. 23-3for left closing door, see Fig. 23-4Fig. 23-2Threaded holes M5160±0,2 142±142±0,520378537Threaded holes M5142±1 160±0,2852042±0,565±1 16±0,245±0,2222±1222±1 45±0,2DIN rightDIN leftFig. 23-3 Fig. 23-423GEZE

GEZE TS 4000 E / EFS – Ordering textDescription Finish ID No.GEZE TS 4000 E for standard installation silver 105211with terminal box, without arm RAL colour 105212GEZE TS 4000 E for transom mounting silver 105213without arm RAL colour 105214GEZE TS 4000 E for transom mounting on hinge side 1) 2) silver 105235with guide rail RAL colour 105236Standard arm silver 102421RAL colour 102425Freeswing arm for TS 4000 EFS silver 106460RAL colour 106462Guide rail silver 102527RAL colour 102528Freeswing guide rail 2) for TS 4000 EFS silver 106844RAL colour 106466Mounting materialMounting plate silver 059107RAL colour 100044AccessoriesSerrated spindle extensions, lenght: 10 mm galvanised 10354815 mm galvanised 10354920 mm galvanised 10355010 mm black chromated 10367715 mm black chromated 10367820 mm black chromated 1036791)Only in conjuction with standard or Freeswing guide rail, arm not possible2)At the moment not permitted for use with smoke and fire-proof doors , size 3 according to EN, leaf width up to 950 mmGEZE24