Dot Marking Systems - Walther Pilot

➍➎➋➌➊Select 2 System / Model V 750n Small spray system with pressure cup, to applyabout 55,000 dots (dots 5 mm in diameter) or3,300 meters of lines (5 mm wide)n Compact design for simple integration into theprocessn Simple operation, low maintenancen For dots of from 3 to 30 mm in diametern A solenoid valve is used to trigger the spray gun.WALTHER PILOT can also deliver the controls,upon requestn We would be happy to provide planning andassembly services, right through to integratingthe system into your assembly line.Equipment➊ Marking spray gun, Model 20-360, with pull rod formanual activation (e.g. for spray trials)Body: nickel-plated brass; nozzle and needle:stainless steel; nozzle sizes: 0.3, 0.5, 0.8, 1.0, 1.2,1.5 mm in diameter➋ Material pressure tank, 750 ml,lightweight alloy, max. 3 bar➌ Solenoid valve, 3-port, 2-position,24 V DC; other voltages available➍ Compressed air manifold with pressure gauges andsafety valveCombination of all compressed air control functionsfor simpler marking systems (control and spraying airfor the spray gun, tank pressurization air)➎ Hose kit (2 meters), incl. fittingsfor both the air and material hosesOptionsn Holders for marking gunsn Spray booths 'Air on demand'. Overspray exhaustsystems are mandatory even if applying only tinyamounts of paint. We have an affordable solution.n Color sensors and measurement transducers forfunction monitoringn Control cabinetsn Integration of the system into your assembly lineSmall marking unitwith integrated 750ml pressure cup formanual operation.These compact devicescan also be set up forexternal control whenshipped from thefactory.5