Quick mould change - Kuboušek Group

ToolS nEED To bE SToRED
AnD In MAnY CASES
ThIS IS AWAY FRoM ThE MAChInES
These horizontal mould storage systems are loaded and unloaded
by means of electric driven mould change cars, on which
either manual or automatically moulds are placed. Underneath
the moulds is room for other mould related equipment.
Our glide-out racks are easily handled by one person
and are equipped with an automatic locking system
for operational safety. Three versions are available,
the standard single entry, which can be extended up
to 63% in one direction, double entry shelves which can
be extended up to 63% in two directions and to complete
the range, the superglide, a two-stage extending system
which gives 100% access to the shelf area.
It is a modular system and may be added to, or adjusted
as required and consists of a starter bay and extension bays.
Easily reachable with overhead crane.
Automatic systems can also be supplied for up to
200 moulds or more. Treat your expensive tools with
great care and store them safely.
If rail guide mould change cars, air float mould change
cars, electric driven or manual free moving are being used
one car easily load and unload the moulds from these
handling systems onto horizontal mould storage systems
or pre heating systems. These horizontal storage systems
are equipped with rollers, a mould stop and a mould
locking device and can placed near the machine or in
other parts or the plant. In case of a railguided system the
storage racks can be placed on both sides of the rails.
This electric driven mould change car for a large vertical press can bring the
moulds far away from the press to a special mould storage area.
The moulds can be stored left and right of the electric driven car.
The driver has a camera and a monitor for exact positioning the car
into the press. Changing and store moulds between 10 and 20 t is in this way
simple, fast and safe.
59
4.
vertical storage
rack systems
horizontal storage
rack systems