CENTRAL MARKS DEPARTMENT Ã¢Â€Â“ II Our Ref: CMD-II/16 ... - BIS

More documents

Recommendations

Info

) Acceptance of revised STI.c) Test report indicating conformity of the product to the revisedspecification.3. Stoppage of marking shall be imposed in case sample fails in factory/ independenttesting as per the revised version at the time of verification on the routine periodicinspection and further actions are to be taken as per Operation CertificationManual.4. Action shall be taken as per OM 2004, if the licensee fails to submit theacceptance of STI in stipulated time.For Applicants:1. All new applications may be recorded and processed as per revised IS 1084:2005.2. In case applicant sample is yet to be tested by Lab, necessary action may be takenimmediately by BO for considering the case as per IS 1084:2005 after consultingthe applicant.3. New licence granted during this period as per IS 1084:1994. ROs/BOs shallensure that new licensee shall implement the revised standard and STI within thestipulated period.REVISED STANDARD IS 1084:2005 AND NEW STI DOC:STI/1084/3, Feb 2006WILL BE EFFECTIVE FROM 15 APRIL 2006.All RO’s/BO’s are requested to take appropriate necessary action.STI is already available on BIS internet site and can be downloaded.Sc.F&H(CMD-II)(N.K. Bansal)Joint Director (CMD-II)Circulated to all RO’sBO’s, CMD-ICc:TXD - with a request to gazette it w.e.f. 15 April 2006.
SCHEME OF TESTING AND INSPECTIONFOR CERTIFICATION OFMANILA ROPESACCORDING TO IS: 1084:2005(Fifth Revision)1. Laboratory - A laboratory shall be maintained which shall be suitably equippedand staffed to carry out the different tests in accordance with the methods given inthe Indian standards.2. Test Records - All records of analysis and tests shall be kept in suitable formsapproved by the Bureau of Indian Standards (BIS).2.1 Copies of any records that may be required by BIS shall be made available at anytime on request.2.2 Quality Control - It is recommended that, as far as possible, Statistical QualityControl (SQC) methods may be used for controlling the quality of the product asenvisaged in this Scheme[See IS 397(Part 1):2003, IS 397 (Part 2):2003 and IS 397(Part 3):2003].2.2.1 All instruments/equipments are required to be brought under calibration control, asper frequency to be decided depending upon the usage.2.3 In addition, effort should be made to gradually introduce a Quality ManagementSystem in accordance with IS/ISO 9001:2000.3. Standard Mark – The Standard Mark(s) as given in Column (1) of the firstSchedule of the licence shall be marked on the labels attached at both the ends ofeach coil of manila rope, provided always that the rope in each coil to which thismark is applied conforms to every requirement of the specification. The Standardmark shall also be marked on each package containing such ropes.4. Marking - In addition, as given in Column (1) of the First Schedule of the licenceshall be marked on the labels attached at both the ends of each coil of manila rope,provided always that the rope in each coil to which this Mark is thus mark appliedconforms to every requirement of the specification. The Standard Mark shall alsobe marked on each package containing such ropes.a) The manufacturer’s name and trade mark, if any;b) Length of rope in coil;c) Diameter of the rope in mm;d) Month and year of Manufacturer;
Page 1: CENTRAL MARKS DEPARTMENT - IIOur Re
Page 5 and 6: 9.5 Lubrication - Welding or loadin
Page 7 and 8: 6.5 Lubrication 6.5 IS 1084:2005 On

CENTRAL MARKS DEPARTMENT Ã¢Â€Â“ II Our Ref: CMD-II/16 ... - BIS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?