ToneLab EX Owner's Manual - Vox

4
reverb in the mix. If you turn the knob all the way to the left,
the reverb effect will be turned off.
In the OPTION parameter setting mode, this control knob
enables you to adjust the Total Equalizer Low.
For details on each effect, refer to “Reverb types” (p. 29)
h. VOLUME control
This adjusts the volume of the program.
In the OPTION parameter setting mode, it enables you to
select Trim.
HINT: You can adjust the volume of the program even when
the amp model is turned off.
2.Bank select section
a. BANK UP/DOWN pedals
In program select mode, these pedals enable a
you to select a program bank (p. 10, “Trying
out the ToneLab EX”).
Pressing the BANK UP pedal will increment
the bank by one, and pressing the DOWN
pedal will decrease the bank by one.
The bank number will be displayed in the a
Bank/Value display.
If you press the UP and DOWN pedals
simultaneously for about one second, the
“ ” indicator will appear on the Bank/Value display, and
the unit will enter Stomp Box Mode. In Stomp Box Mode,
these pedals turn on or off the amp/stand alone pedal and the
effect assigned to pedal 1 individually (p. 11, “Stomp Box
Mode”).
3. Program Select/Tuner/Stereo Speakers section
a
b
c
a. Program 1–4 pedals and LED
In program select mode, these pedals enable you to select a pro‐
gram from a bank (p. 10, “Trying out the ToneLab EX”). If you
select a program, a program LED that corresponds to the selected
program will be lit‐up red. (Program 1–4 LEDs are located above
the program 1–4 pedals and indicate the tuning status.)
HINT: You can set the delay time using the program 1–4 ped‐
als. In this case, the interval at which you tap twice on a
program pedal (that corresponds to the selected pro‐
gram) will be assigned as the delay time.
HINT: If you press and hold down the program pedal that corre‐
sponds to the current program for about one second, all ef‐
fects will be bypassed and youʹll be able to use the tuner. If
you hold down the program pedal for about two seconds,
youʹll be able to use the tuner with the sound muted.
In Stomp Box Mode, these pedals turn on or off the pedal 2
effect, modulation effect, delay effect, and reverb effect individ‐
ually. When an effect is turned on, the corresponding program
1–4 pedal LED will be lit‐up red (p. 11, “Stomp Box Mode”).
c