ZUCCHINI LMP 001-079_EN.indd - Legrand

LBLighting BuswayFEED UNITSAllows you to electrically power the LB line through acable line; the installation is carried out with a quickjunction connection as with the straight elements.The feed units have terminals for the connection offlexible copper cables for sections of up to 25 mm 2 .There is an anti-pullout cable clamp inside the feedunit. The entrance point for the incoming cable ispositioned on the end of the feed unit.Standard end feed unitEND COVERThe end cover ensures the IP 55 protection degree atthe end of the line.End coverFIXING DEVICESSpecific accessories are available for attaching thebusbar to the structure of the building (directly orwith a steel chain or cable).The accessories for overhead fixing are:• snap clamp: the snap-on installation is extremelyfast. This bracket is suitable both for overhangingthe busbar to the ceiling and for hanging productssuch as fluorescent lamps, tap-off boxes, etc., tothe busbar itself;• snap clamp with ring or hook: the ring or the hookenables to hang lamps easily.• simple bracket: used with the ceiling bracketholder, it enables the installation the busbar directlyonto the ceiling at a distance of about 25cm;• wall bracket: enables the fixing of the busbardirectly onto the wall of a building, setting it at therequired distance enabling the installation of thenecessary components.Fixing accessories for fastening the busbar run to the structureand hanging the lamps onto the busbar4 LB - LIGHTING BUSWAY