HC100 PI - Aqua Water Systems

DOSING SYSTEMSSolenoid Driven Dosing PumpsHC100 PITechnical Data SheetHC1 seriesKEY FEATURES• Manual Control adjustment 0-100%• Microprocessor technology• Proportional Control via a volt free pulse input• Pulse Multiplication & Division: 1xN - 1/N• PTFE Diaphragm• LED Display of setting• Dosing Head with integral priming valve• Double ball valves as standard• Lip valves on request• Wall Mount with bracket & fixing kit• Reinforced PP Plastic housing• Optional Low level control with level switch• Supplied complete with hose accessory kitThe HC100 PI is a proportional solenoid driven dosing pump, diaphragm actuated microprocessor based with digitalcontrols. The HC100 PI is designed to accept an external volt free pulse typically from contacting head water meter &respond according to that pulse. The stroking speed of the pump can be easily programmed via multiplication ordivision controls on the front panel. A manual setting is also available for priming purposes.This model also features low level protection operated by an optional level switchPUMP FUNCTIONS, DOSING MODES AND CONTROLSDigital controls: allow easy programming for both proportional and manual mode.Programming modes:- Manual mode: (F1) enables you to select the exact number of strokes, between 1-105 strokes perminute, mainly used to prime the pump.- Multiplication mode: (F3) The pump will stroke in response to an external pulse. The pump control panelenables you to set the number of pulses the pump will stroke (0-999) from a single pulse.- Division mode: (F2) The pump will stroke in response to external pulses. The impulse counter enablesyou to set the number of pulses received (0-999) before the pump does 1 stroke.Optional Level control: If fitted a level switch stops the pump when the chemical level runs low.LIQUID END MATERIAL HC100 SERIESStandard VersionUpon requestPump head PP PVDFDiaphragm PTFE ------Valve balls Glass Pyrex AISI 316 – PTFE - CERAMICValve cartridge PP PVDFSpring loaded injection valve: Hastelloy/Pyrex Hastelloy/AISI316 - PTFESeals/O-rings Viton ® Dutral® - NBRSpring Loaded Injection Fitting Hastelloy/Pyrex Hastelloy (AISI 316 – PTFE - CERAMIC)Injection Fitting PP PVDFFoot Valve Strainer PP PVDFSuction Hose /Air Bleed hose PVC PVDFDischarge Hose PE PVDFUpon request: Lip type valve Viton ® Dutral® - NBRInjection Sleeve-Non return Valve Viton ® Dutral® - NBRViton®: FPM / Dutral®: EPDM, are registered trademarks of Dupont ElastomersIssue 1 1 of 2 1 st April 2011

TECHNICAL CHARACTERISTICS HC1 SERIESMax Flow at Stroke Stroke Stroke Power Hose Pump head MaxModel Max Pressure frequency volume length cons. size (connections) suctionl/h bar per min. ml / l mm watt mm model lift mHC 100 PI 01-08 1 8 105 0.16 20 4x6 PP 3/8" 1.5HC 100 PI 02-07 2 7 105 0.32 1.2 20 4x6 PP 3/8" 1.5HC 100 PI 04-05 4 5 105 0.64 1.1 20 4x6 PP 3/8" 1.5HC 100 PI 05-08 5 8 105 0.79 2.0 20 4x6 PP 3/8" 1.5TYPICALOUTPUTHC1Flowat maxpressureFlow atmediumpressureFlowat1 barModel l/h bar l/h bar l/h bar01-08 1 8 4.5 4 7.5 102-07 2 7 5 3.5 8 104-05 5 5 6 2.5 9 105-08 5 8 7 4 10 1Power supply: 230 Vac -1 phase - 50/60 Hz / ± 10% Power cable: 3 m grounded without plugAvailable upon request: 110 Vac - 1 phase - 60 Hz Ambient working temperature: 45°CRecommended frequency adjustment: 10 - 100%Voltage working range: min 207v - Max 253vReproducibility under standard conditions: ± 5%Voltage Peak: Max 270vPlastic housing: PP reinforcedWall mounting bracket: PolypropyleneHC100 PI is provided with a Standard Hose Accessory Kit:1 No - PP Non return Injection valve (ball type)2 m - Discharge Hose (PE)2 m - PVC clear suction hose1.5 m – PVC clear priming hoseUpon Request: Low Level facility & Low Level switch1 No - PP Foot valve strainer with lip valveScrews and plugs for pump mounting bracketFor Lip valve version:1 No - Injection Valve - VitonHC1 seriesDimension & Packing DetailsPacking weight: 2,5~3 kgPacking size (mm): 220 x 170 x 210Packing volume: 0.008 m3134Now AvailableHorizontal mount for HC100 series pump208126.3Technical Data SheetHC100 PIIssue 1 2 of 2 1 st April 2011