13.07.2015 Views

EN 13813 - 30.06.09 - Basf

EN 13813 - 30.06.09 - Basf

EN 13813 - 30.06.09 - Basf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

EU-Declaration of PerformanceIn accordance with Annex III of Regulation (EU) No. 305/2011(Construction Product Regulation)For the product “MASTERTOP 1326 REG”N°: 1326031. Unique identification of the product-type:<strong>EN</strong> <strong>13813</strong>: 2002: SR-B1,5-AR1-IR42. Type, batch or serial number or other identifying mark to identify the constructionproduct as set out in Article 11 (4):Batch number: See product label under “Lot”3. Intended use as foreseen by the manufacturer of the construction product inaccordance with the harmonised technical specification:<strong>EN</strong> <strong>13813</strong>: synthetic resin for internal uses:4. Name, registered trade name or registered trade mark and contact address of themanufacturer as set out in Article 11 (5):BASF Construction Chemicals Europe AGIndustriestrasse 26CH-8207 Schaffhausen5. When applicable, the name and contact address of the authorized representativewho has received a mandate for the tasks set out in Article 12(2):Not relevant6. System or systems for assessment and verification of constancy of performance ofthe construction product in accordance with Annex V:System 4System 3 for fire behaviour7. In the case of a declaration of performance concerning a construction product that iscovered by a harmonized standard:MPA Dresden GmbHFuchsmühlenweg 6FD-09599 Freiberg(CE identification number: 0767)Tested the fire behaviour (DIN <strong>EN</strong> ISO 9239-1, 11925-2, 13501-1) according toSystem 3:Test reports Nr: 2010-B-3451/02, 2010-B-3451/03Classification report: 2010-B-3451/018. In case of a declaration of performance concerning a construction product for whicha European Technical Assessment was issued:Not relevant


9. Declared performance:Performance determined in System MASTERTOP 1326 REGEssential characteristics Performance Harmonised technicalspecificationFire classification Dfl-s1 <strong>EN</strong> <strong>13813</strong>: 2002Release of corrosiveSR <strong>EN</strong> <strong>13813</strong>: 2002substancesWater permeability NPD <strong>EN</strong> <strong>13813</strong>: 2002Wear resistance < AR 1 <strong>EN</strong> <strong>13813</strong>: 2002Bond strength > B 1,5 <strong>EN</strong> <strong>13813</strong>: 2002Impact resistance > IR 4 <strong>EN</strong> <strong>13813</strong>: 2002Impact sound insulation Delta L=19 dB <strong>EN</strong> ISO 717-2Sound absorption NPD <strong>EN</strong> <strong>13813</strong>: 2002Heat insulation NPD <strong>EN</strong> <strong>13813</strong>: 2002Chemical resistance NPD <strong>EN</strong> <strong>13813</strong>: 2002Slip resistance NPD DIN 51130: 2010-10Emissions behavior NPD <strong>EN</strong> <strong>13813</strong>: 2003-1NPD: No Performance DeterminedWhen specific technical documentation in accordance with Articles 37 and 38 wasused, the requirements that the product fulfills:Not applicable10. The performance of the product set out in numbers 1 and 2 corresponds to thedeclared performance set out in number 9. The manufacturer as defined in number 4is solely responsible for drawing up this declaration of performance.Signed for the manufacturer and in the name of the manufacturer by:Daniel NanProduct managerPerformance Flooring EuropeGwénaël JanProduct managerPerformance Flooring EuropeSchaffhausen, 15.04.2013Attachements:Technical data sheets for use in buildings (system build-ups according to respectivetechnical data sheets)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!