13.07.2015 Views

27096R 215 Plus Plattenentwickler(GB) - ADEFO-CHEMIE GmbH

27096R 215 Plus Plattenentwickler(GB) - ADEFO-CHEMIE GmbH

27096R 215 Plus Plattenentwickler(GB) - ADEFO-CHEMIE GmbH

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 3/7Printing date 23.04.2009 Version 1Revision: 23.04.2009Trade name: R <strong>215</strong> <strong>Plus</strong> Plate developer· Information about storage in one common storage facility: Not required.· Further information about storage conditions:Keep container tightly sealed.Store in a cool place.· Recommended storage temperature: 5-30°C· Storage class LGK 8B (VCI-Concept)(Contd. of page 2)* 8 Exposure controls and personal protection· Additional information about design of technical systems: No further data; see item 7.· Components with limit values that require monitoring at the workplace:1310-58-3 potassium hydroxideWEL Short-term value: 2 mg/m³· Additional information: The lists that were valid during the compilation were used as basis.· Personal protective equipment· General protective and hygienic measuresThe usual precautionary measures should be adhered to general rules for handling chemicals.Keep away from foodstuffs, beverages and food.Take off immediately all contaminated clothingWash hands during breaks and at the end of the work.Avoid contact with the eyes and skin.· Breathing equipment: Not required.· Protection of hands:Protective gloves.The protective gloves to be used must comply with the specifications of the EC directive 89/686/EEC and the resultant standard EN 374.This recommendation applies only to the product stated in the Safety Data Sheet and supplied byus as well as to the purpose specified by us.Only use chemical-protective gloves with CE-labelling of category III.Selection of the glove material on consideration of the penetration times, rates of diffusion and thedegradation· Material of glovesThickness (mm)Breakthrough time (min)Nitril rubber 0,38 > 480Neoprene 0,65 > 240Butyl rubber 0,36 > 480· As protection from splashes gloves made of the following materials are suitable:Synthetic glovesValue for permeation: Level:≥ 3 (60 min)· Not suitable are gloves made of the following materials: Natural rubber, NR· Eye protection: Tightly sealed safety glasses.· Body protection: Protective work clothing.<strong>GB</strong>(Contd. on page 4)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!