diesel - Lionel

More documents

Recommendations

Info

Running your trainSounding your locomotive’s hornPress the HORN button on your controller to sound the locomotive's horn. Be sure that thehorn ON/OFF switch is in the ON position. Refer to Figure 5 on page 6 for the location ofthat switch.If your controller does not have a HORN button, install a Lionel Sound Activation Button(available separately, part no. 610-5906-001). Connect the button as shown in Figure 2.If you would like to disable the horn sounds, throw the horn ON/OFF switch to the OFFposition.Note!All track power must feed through the Sound Activation Button. Do not bypass thebutton.LockonRed wire1 21 2ExistingwireBlack wireCommon/Ground/UPOWERSUPPLYPower/ALionel no. 610-5906-001Sound Activation Button foractivating the hornFigure 2. Sound Activation Button wiringThe no. 610-5906-001 button works with any Lionel AC transformer exceptNote!no. 6-4690 Type MW.
Running your trainAttaching the three facesThree interchangeable facial expressions easily slip on and off for fun and imaginative play.Refer to Figure 3.Figure 3. Interchangeable facesTo attach one of the faces, carefully remove the current face by pulling it straight off. Attach thenew face by lining up the pegs on the back of the face and pressing it on. Refer to Figure 4.Figure 4. Attaching the faces
Page 1 and 2: 72-8883-2509/07DieselOwner’s Manu
Page 3: Running your trainRunning your loco
Page 7 and 8: Maintaining and servicing your setL

diesel - Lionel

Create successful ePaper yourself

Delete template?

Save as template?