30.07.2015 Views

triad® electronic ballasts - Conserve-A-Watt Lighting, Inc

triad® electronic ballasts - Conserve-A-Watt Lighting, Inc

triad® electronic ballasts - Conserve-A-Watt Lighting, Inc

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SpecificationsTYPICAL SPECIFICATIONSFOR INSTANT START BALLASTS FOR:• HP (High Performance)• HPL (High Performance Low Power)• HPH (High Performance High Light)1. Ballasts (1-4 lamp) shall operate as a Parallel Circuit, allowing remaining lamp(s) to maintain full light outputif one or more lamps fail (except T12 High Output).2. Ballasts shall operate from 50/60 Hz input source of 120, 277, and 347 Volts, and sustained variations of± 10% (Voltage & Frequency) with no damage to the <strong>ballasts</strong>.3. Ballasts shall be a high frequency <strong>electronic</strong> type, and operate lamps at a frequency above 20 kHz.4. Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lampmanufacturer recommendation and ANSI C82.11-1993.5. Ballasts shall provide transient immunity as recommended by ANSI C62.41-1991, Location A2.6. Ballasts shall operate lamps with no visible flicker (

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!