ASTM Standards

amchro.com

ASTM Standards

Over 100ASTM MethodsPETRCertifiedReferenceStandards4th EditionMemberOLEUMAccuStandard ®


Table of ContentsASTM # Method Description pageCross Reference Tables (ASTM,IP,ISO,DIN,JIS,AFNOR) IIAnalytical CapabilitiesIIIOn-Line OrderingIVQuality Control 1-2D-56 Flash Point Standards 3D-86 Synthetic Distillation Standard 3D-92 Flash Point Standards (COC) 3D-93 Flash Point Standards (PMCC) 3D-445 Viscosity Calibration Standard 3D-611 Aniline Point Standard 4D-1015 Freezing Point Standards 4D-1319 Olefin Analysis by FIA 4D-1744 Water in Liquid Petroleum Products 5D-2386 Freezing Point Calibration Standards 5D-2500 Cloud Point Calibration Standards 5D-2622 Sulfur by XRF 10D-2789 Hydrocarbon Analysis in Gasoline by GC/MS 11PIANO, PONA, PNA by GC 12-13Proposed Method for Detailed Hydrocarbon Analysis 14Detailed Hydrocarbon Analysis PONA VI 14D-2887 Boiling Range by GC 14Simulated Distillation (SIM DIS) by GC 15D-3120 Sulfur by Oxidative Microcoulometry 16D-3230 Salts in Crude Oil 16D-3231 Phosphorus in Gasoline 16D-3237 Lead in Gasoline by AA 16D-3246 Sulfur in Petroleum Gas by Oxidative Microcoulometry 16D-3340 Li & Na in Lubricating Greases by Flame Photometer 17D-3524 Diesel Fuel Analysis by GC 17D-3605 Trace Metal in Gas Turbine Fuels by AA 17D-3606 Aromatics in Gasoline by GC 18D-3610 Total Co Analysis by Potentiometric Titration 18D-3710 Boiling Range by GC 20D-3798 p-Xylene Analysis by GC 20D-3831 Manganese in Gasoline by AA 20D-4059 PCB Analysis by GC 21D-4110 Ion Chrom 76D-4291 Ethylene Glycol by GC 21D-4294 Sulfur by ED-XRF 7-11, 21D-4377 Water in Liquid Petroleum Products 5, 21D-4420 Aromatics in Gasoline by GC 22D-4628 Wear Metals in Lube Oil 22D-4629 Nitrogen by Chemiluminescence 23D-4815 Oxygenates in Gasoline by GC 24D-4927 Wear Metals and Additives by WD-XRF 25,63D-4928 Water in Liquid Petroleum Products 6, 25D-4929 Chlorine in Crude Oil by Microcoulometry 25D-4951 Wear Metals and Additives by ICP 26D-5056 Trace Metals in Petroleum Coke by AA 26D-5059 Lead in Gasoline by X-Ray Spectroscopy 27D-5134 Petroleum Naphthas through n-Nonane by GC 27D-5184 Al and Si by ICP-AES & AA 28D-5185 Wear Metals and Additives by ICP 28D-5186 Aromatics by SFC 28D-5188 Vapor - Liquid Ratio Temperature 29D-5191 Vapor Pressure Standards 29D-5307 Boiling Range Distribution of Crude Petroleum by GC 29Sulfur Standards GroupD-2622 Sulfur by XRF 10D-3120 Sulfur by Oxidative Microcoulometry 10, 17D-3246 Sulfur in Petro Gas by Oxidative Microcoulometry 6-11D-4294 Sulfur by ED-XRF 10D-5453 Sulfur by Ultra Violet Fluorescence 6-11, 31D-5623 Sulfur Compounds by Sulfur Selective Detection 38D-6334 Sulfur in Gasoline by Wavelength WD-XRF 6-11D-6445 Sulfur in Gasoline by ED-XRF 6-11ASTM # Method Description pageD-5441 MtBE Analysis by GC 30D-5442 Petroleum Waxes by GC 31D-5443 PNA Analysis by Multidimensional GC 31D-5453 Sulfur by Ultra Violet Fluorescence 31D-5480 Engine Oil Volatility by GC 32D-5482 Vapor Pressure Standards 29, 32D-5501 Ethanol Analysis by GC 32D-5580 Aromatics by GC 32-33D-5599 Oxygenates by OFID 34-36D-5600 Trace Metals by ICP 37D-5622 Oxygenates by Reductive Pyrolysis 37D-5623 Sulfur Compounds by Sulfur Selective Detection 38D-5708 Trace Metals by ICP 39, 62D-5762 Nitrogen by Chemiluminescence 40D-5769 Aromatics by GC/MS 42-51D-5771 Cloud Point of Petro Products 52D-5772 Cloud Point of Petro Products (Linear Cooling Rate) 52D-5773 Cloud Point of Petro Products (Constant Cooling Rate) 52D-5863 Trace Metals by AA 52D-5901 Freezing Point Aviation Fuels (Auto Optical Method) 53D-5972 Freezing Point Aviation Fuels 53D-5986 Oxygenates and Aromatics by GC/FTIR 53D-6160 PCBs by GC 54D-6258 Solvent Red 164 Dye Concentration in Diesel Fuels 54D-6277 Benzene in Spark Ignition Fuels 54D-6293 Oxygenates (O-PONA) in Engine Fuels by GC 55D-6296 Total Olefins in Spark Ignition Engine Fuels by GC 55D-6304 Water in Liquid Petro Products 5D-6334 Sulfur in Gasoline by Wavelength WD-XRF 10, 56D-6352 Boiling Range Distribution of Petroleum 56D-6378 Vapor Pressure 56D-6379 Aromatic Hydrocarbon by HPLC 57D-6417 Engine Oil by GC 57D-6428 Sulfur by ECD 57D-6443 Metals in Oil 58-65D-6445 Sulfur in Gasoline by ED-XRF 10, 58D-6481 Lube Oils by ED-XRF 58, 63, 64D-6550 Olefin Content of Gasoline by SFC 58D-6591 Aromatic Hydrocarbon by HPLC 57(IP 391)E-1064 Water in Petroleum 6ISO/CD V & Ni with Mn 62Organometallic (Wear Metals) Analysis by AA, ICP, DCP, XRF 26, 28, 59-66Plasma Emission Spectroscopy (ICP) 67-71ICP (No Haz Fee) New 67-71Atomic Absorption Spectroscopy (AA) 67, 73-75AA (No Haz Fee) New 67, 73-75Plasma Emission / Mass Spectroscopy (ICP/MS) 72Trace Metals, Chlorine in Lube Oil, and Organo Tin New 66Ion Chrom 76-79LUFT/LUST and TPH (New Section) 81-98IndexQuote FormOrder InformationWear Metals GroupQuality System is Certified to comply with the International ISO 9001:2000 Quality Standardi-viibackbackD-3605 Trace Metals in Gas Turbine Fuel by AA 17D-4628 Wear Metals in Lube Oil 22D-4927 Wear Metals and Additives by WDXRF 25, 63-64D-4951 Wear Metals and Additives by ICP 26D-5185 Wear Metals and Additives by ICP 28D-5708 Trace Metals by ICP 39, 62D-5863 Trace Metals by AA 52D-6443 Metals in Oil 58, 64D-6481 Lube Oils by ED-XRF 58, 63-64QCASTM SULFUR WEAR METALS PIANO ORGANOMETALLIC ICP & AA LUFT/LUST INDEXQUOTE FORM


Cross Reference Table Sorted by ASTM MethodUse the AccuStandard CrossReference Tables to Matchvarious InternationalMethods for knownPetrochemical analysis.ANALYSIS ASTM IP ISO DIN JIS AFNOR PAGETag Flash Point D-56 51411 K 2580 M07-003 3Distillation D-86 123 3405 51751 K 2254 M07-002 3COC Flash Point D-92 36 2592 51376 K 2265 T60-118 3PMCC Flash Point D-93 34 2719 51758 K 2265 M07-019 3MEMBERKinematic Viscosity D-445 71-1 3104 51562 K 2283 T60-100 3Aniline Point D-611 2 2977 51775 M07-021 4Hydrocarbon Types by FID D-1319 156 3837 51791 K 2536 M07-024 4Water (Karl Fischer) D-1744 6296 T60-154 5Freezing Point D-2386 16 3013 51421 K 2276 M07-048 5Cloud Point D-2500 219 3015 51597 K 2269 T60-105 5Sulfur by XRF D-2622 51400T6 K 2541 10Boiling Range By GC D-2887 3924 14Sulfur by Oxidative Microcoulometry D-3120 16591 16Lead by AAS D-3237 428 16Fully AccreditedFor over 17 yearsAccuStandard has been theLeader in the ChemicalStandards Industry in bothOrganic and Inorganicproducts. AccuStandard isISO 9001:2000 registeredand a NIST/NVLAPaccredited ProficiencyTesting Provider (NVLAPCode 200389-0).Sulfur by Oxidative Microcoulometry D-3246 373 M07-052 10Metals by AA D-3605 413 8691 51790T3 17Benzene by GC D-3606 425 18Sulfur by ED-XRF D-4294 336 8754 M07-053 21Water (Karl Fischer) D-4377 356 10336 5Metals by AA D-4628 308 51391T1 22Nitrogen by Chemiluminescence Detection D-4629 379 M07-058 23Metals by WD-XRF D-4927 407 51391T2 25, 63Water (Karl Fischer) D-4928 386 10337 5, 25Lead in Gas By X-Ray D-5059 228 27Vapor Pressure D-5191 394 M07-079 29, 32Oxygenates D-5599 408 34-36Cloud Point D-5771 444 52ISO 9001:2000Certificate Number: 31692Cloud Point D-5772 445 52Cloud Point D-5773 446 52Freezing Point D-5901 434 53Auto-Freeze Point D-5972 435 53Hydrocarbons Automatic D-6379 436 57Hydrocarbons Automatic NEW D-6591 391 57Metals 14597 62This is a partial list of Standards available for ASTM MethodsTables Generated from(a) R.A. Nadkarni, “Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants,” Manual 44(200), ASTM West Conshohocken, PA(b) Annual Book of ASTM Standards 2000, Volumes 05.01 to 05.05IIMemberAccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.


Analytical CapabilitiesInorganic (ICP)PE Optima 3000Spectro FMD-07OrganicsGCs: (6)HP 5890 Series II, FID, NPD, ECD all withauto injectorsGC/MS: (3) HP 5971AHP 5971A with OI Analytical Purge & TrapPE Q-Mass 910HPLC:Analytical InstrumentsVarian 5000 with Applied Bioscience Fluorescencedetector and HP auto injectorSulfur (low level)XOS (XRF) with monochromatic wavelength disperserAntek 9000 Series (UVF)MiscellaneousIon Chromatograph, Waters 600E withConductivity detector 431, Alltech 335 IonSuppressorAutomatic Polarimeter, Zuzi W22Karl Fischer TitratorLab ResourcesMilligram to Kilogram Scale GlasswareEquipment to work under N 2 /ArFlash and Liquid Solid Phase Chrom. (mg to 2 kg)Preparative TLCBuchi Rotary EvaporatorVacuum Drying OvenParr Pressure Reactor (high pressure reaction, hydrogenation)Distillation Equipment - High Vacuum Distillation, MolecularDistillation (Kugelrohr), Spinning Band Columns,Packed and Vigreaux columnsMelting Point ApparatuspH meterViscometerCentrifugeIII


5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 30,000 products.Search by:Catalog NumberSingle or Multiple Components,Method (EPA, ASTM, etc.)Chemical Category (Organic, Inorganic, Petroleum, etc.)Other Companies’ Part NumberLog on to www.accustandard.com and see how easy it is.Easy Ordering 24/7On-Line OrderingThere is an easier way to get Chemical Reference Standardse-Standards ® from AccuStandard.comFind It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply to online orders, seedetails on website.On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need, we can prepare Custom Formulationsand Custom Packaging for both Organic and Inorganic needs.See our Website for more info.Over 30,000 Standardsjust a click awayCustom FormulationsAccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a customformulation. Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. Tomake an inquiry for Custom Quotes visit our website.You can also Email your requirements to techservice@accustandard.com or Fax us at 203-786-5287. Please include the followinginformation: List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (millilitersper ampule, bottle, or vial).Quality Control Options1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (whereavailable). Every component in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. Thesolutions are made up to volume using class A glassware. A certificate comes with each standard and documents the gravimetricvalues used.2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plusstatistical analysis. A data package is provided containing analytical and gravimetric data (Organic customs only).Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.IV


Quality Control StandardsReal WorldGasolineD-02.03QCD-02.04AccuPetroCheck and AccuPetroTest Real World Gasoline QC StandardsIn cooperation with ASTM D-02 subcommittee 3 and 4, AccuStandard ampulled 21 Real World gasoline reference fuels. Consensus Values havebeen determined for these reference fuels by various ASTM Round Robins to provide Petrochemical Laboratories with a source of wellcharacterized gasoline standards for use in QA/QC applications and as Single Blind test samples over an extended period of time. As new ASTMD-02.03 and D-02.04 Test methods are promulgated they require mandatory Quality Control testing of real world samples. AccuStandard’sPetroTest & PetroCheck standards are being successfully used to achieve these new Quality Control requirements.QCAccuPetroCheckCARB Low Sulfur RFG QCStandardASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mLParameter Method Value Conc.Total Aromatics D-1319 24.5 Vol.%Total Olefins D-1319 5.3 Vol.%Total Saturates D-1319 58.3 Vol.%Sulfur D-2622 0.0057 Wt.%Sulfur D-4294 0.0078 Wt.%Sulfur D-5453 55.76 µg/gSulfur D-6344 59.31 µg/gBenzene D-5769 0.80 Vol.%Toluene D-5769 4.92 Vol.%Total Aromatics D-5769 23.42 Vol.%Benzene D-6277 0.78 Vol.%Total Olefins D-6550 5.3 Vol.%Consensus Value QC StandardsConventional Gasoline QCStandardASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mLParameter Method Value Conc.Total Aromatics D-1319 34.6 Vol.%Total Olefins D-1319 12.4 Vol.%Total Saturates D-1319 62.8 Vol.%Sulfur D-2622 0.0338 Wt.%Sulfur D-4294 0.0368 Wt.%Sulfur D-5453 317.36 µg/gSulfur D-6344 338.78 µg/gBenzene D-5769 0.55 Vol.%Toluene D-5769 5.53 Vol.%Total Aromatics D-5769 32.51 Vol.%Benzene D-6277 0.52 Vol.%Total Olefins D-6550 12.4 Vol.%AccuPetroCheck QC StandardsTwo of the fuels are available asAccuPetroCheck Consensus Value QCStandards. The AccuPetroCheck CARB andConventional gasoline reference materials haveall parameters listed on the certificate with theConsensus Values and the regression equationsfor reproducability. Use of these ReferenceMaterials improve the quality of laboratoryresults. The Consensus Values listed reflectinitial statistical treatment of the data at the timethe catalog was published. The actual certificateprovided with the AccuPetroCheck QC standardwill have the accepted Consensus Value based onstatistical treatment of the data.AccuPetroTestSulfur in Diesel Fuel QC StandardSBPT-SDF$ 25 / 2 x 15 mLParameterApprox. RangeSulfur20 - 11000 µg/gSee ASTM Methods D-2622, D-3120, D-3246-92,D-4294, D-5453 for Sulfur Calibration StandardsAccuPetroTest GasolineLow Sulfur QC SampleSBPT-LSGAS$ 25 / 2 x 15 mLParameter Method Approx. RangeSulfur D-5453 0 - 50 µg/gSulfur in White Mineral Oil QCStandardSBPT-SWMO$ 25 / 2 x 15 mLParameterApprox. RangeSulfur20 - 11000 µg/gSee ASTM Methods D-2622, D-3120,D-3246-92, D-4294, D-5453 for SulfurCalibration StandardsOlefin QC SampleSBPT-OLEFINSFC$ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Olefins D-6550 1 - 40 Vol.%Sulfur Single Blind AccuPetroTestAlternative Matrices StandardsAccuStandard has manufactured a number ofDiesel and White Mineral Oil QC productscontaining a gravimetrically prepared amount ofSulfur. Use of these alternative matrix materialscan provide further evaluation of the QA/QCprocess in the laboratory. Two samples will besent for the test parameter and a separate sealedenvelope containing the gravimetrically preparedsulfur values is also provided. The secondsample is for repeatability testing or for use as afuture QA/QC reference.AccuPetroTest GasolineComprehensive Single Blind Gasoline QC SampleSBPT-COMP$ 50 / 2 x 15 mLParameter Method Approx. Range Conc.Total Aromatics D-1319 8 - 60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30 - 80 Vol.%Sulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 0.5 -500 µg/gSulfur D-6344 1.0 - 1000 µg/gBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%Total Aromatics D-5769 8 - 60 Vol.%Benzene D-6277 0.1 - 2.0 Vol.%Total Olefins D-6550 1 - 40 Vol.%Technical NoteThis comprehensivesingle blind gasoline QCsample tests for moreparameters from a singlesample. The actualgasoline sample will haveconsensus values listedon the datasheet that fallwithin the range listed foreach parameter.Quality Control Standardscontinue on next pageFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 1


ASTM Round Robin&PTQCSamplesQuality Control StandardsQCAccuPetroTest Gasoline QCOlefins QC SampleSBPT-OLEFIN$ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Aromatics D-1319 8-60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30-80 Vol. %See ASTM Method D-1319 for Sulfur CalibrationStandardsAromatics QC SampleSBPT-AROM$ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Aromatics D-5769 8 - 60 Vol.%See ASTM Methods, D-3606, D-5580-95, D-5769-95for Benzene Calibration StandardsSulfur QC SampleSBPT-SGAS$ 25 / 2 x 15 mLParameter Method Approx. RangeSulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 4.0 - 500 µg/gSulfur D-6344 1.0 - 1000 µg/gSee ASTM Methods D-2622, D-3120, D-3246-92,D-4294, D-5453 for Sulfur Calibration StandardsBenzene/Toluene QC SampleSBPT-BENZ$ 25 / 2 x 15 mLParameter Method Approx. RangeBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%See ASTM Methods, D-3606, D-5580-95, D-5769-95for Benzene Calibration StandardsAccuPetroTest Single BlindStandardsPetrochemical laboratories looking to testthe performance of the laboratory for aspecific parameter can order the SingleBlind AccuPetroTest sample for theparameter of interest. Two real worldgasoline samples will be sent for the testparameter requested and a separate sealedenvelope containing the determinedConsensus Value is also provided. Thesecond sample is for repeatability testingor as a future QA/QC reference.Conducting a Petrochemical Round Robin for a new ASTM method?Select AccuStandard to prepare the necessary samples for the Round Robin studyAccuStandard has packaged for ASTM committee D-02 various select groups of gasoline fuels and hydrocarbon products for use in variousRound Robin studies.Large Sample OfferingAccuStandard was selected by ASTM committee D-02 to fill, seal and package an initial set of 21 different types of Round Robin Gasolines.Each gasoline was selected due to its unique properties. These unique properties will be determined by various ASTM methods under evaluationthrough ASTM subcommittees. AccuStandard has expanded this offering with additional materials blended for other ASTM Round Robins.FlexibilityUse the original 21 gasoline samples to conduct a Round Robin and we can label the samples appropriately to protect the integrity of the RoundRobin. In addition, we can easily add additional samples to your specific Round Robin study to expand the scope of the method for differentmatrices, concentrations or instrument types.Petro PT SamplesNEWOxygenate PT SampleWith MtBE contamination problems in drinking water, numerous states arenow requiring certification for Oxygenate monitoring. Join AccuStandard’snext study for Oxygenate analysis. Our timely PT schedule easily allowsyour lab to be proactive in new regulatory requirements. The analytes inthe standard and the PT sample have been drawn from the California listof known prevalent oxygenates in gasoline. These new Oxygenate PTsamples and standards allow your Lab to:• Expand testing capabilities• Generate new testing revenueWS-PT OxygenatesOPE-OXY-001-AS*OPE-OXY-001-ATOPE-OXY-001-AV*Sample conc. after prep 5.0-50 µg/LContains 4 analytes listed belowETBEDiisopropylether• Eliminate standard preparation• Easily combine with otherAccuStandard Volatile standardsMTBETAMESuggested Calibration StandardOxygenate Gasoline Additive StandardOGAD-001OGAD-001-PAKAt stated conc. in MeOHMtBE(2000 µg/mL)ETBE(2000 µg/mL)Isopropyl ether (2000 µg/mL)NEWTAMEt-Butanol$ 47 / 2 mL$ 47 / 2 mL$ 47 / 2 mL$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mL5 comps.(2000 µg/mL)(10000 µg/mL)WP-PT Oil, Grease & TPHIPE-OILG-001-AS*IPE-OILG-001-ATIPE-OILG-001-AV *Sample conc. after prepContains 2 analytes listed belowAnalyte ListTotal Oil & Grease †TPHOil and GreaseSample range5-100 mg/L5-100 mg/LSuggested Calibration Standard$ 32 / 5 mL$ 32 / 5 mL$ 32 / 5 mLThis PT sample can be used by gravimetric oil and greasemethods. In addition, it can also be used for TPH analysis bygravimetric methods including the EPA method 1664. Thesample contains real world material commonly found atpetroleum containment sites.WC-OILG-10X-1$ 45 / 100 mL1000 µg/mL Total Oil and Grease in n-PropanolContains 500 µg/mL vegetable oil and 500 µg/mL of petroleum oil.Shake well before use.SUFFIX KEY"AS" = Formal PT Study"AT" = Pre-Test"AV" = Values IncludedTechnical Note*Designed for NELAC/CA† Indicates that theses analytes areincluded in the NVLAP Scope ofAccreditation, Lab Code 200389-0Lab Code 200389-02 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Physical PropertiesMethod 56, 92, 9386445MemberASTM D-56, D-92, D-93Flash Point StandardsQCVerified by consensus analysis using ASTM Method # referencedCat. No. ASTM # Nominal Flash Point Price / UnitASTM-P-132-01 PMCC D93 65°C $ 110 / 250 mLASTM-P-132-02 PMCC D93 93°C 110 / 250 mLASTM-P-132-03 COC D92 200°C 110 / 250 mLASTM-P-132-04 COC D92 230°C 110 / 250 mLOriginally designed forASTM D-56-98a,D-92-98a, D-93-99bASTMCertified Flash Point StandardsThe reference material is a stable, pure hydrocarbon with a method specific flash pointdetermined by an inter-laboratory study using the ASTM Method # referenced.Cat. No. ASTM # Nominal Flash Point Price / UnitASTM-P-133-01 PMCC D93 65°C $ 175 / 250 mLASTM-P-133-02 PMCC D93 134°C 130 / 250 mLASTM-P-133-03 COC D92 138°C 130 / 250 mLASTM-P-133-04 TCC D56 67°C 175 / 250 mLASTM D-86Synthetic Distillation StandardThe automatic distillation apparatus duplicates the distillation conditions of the manual method. Theincreased reliance on electronic control requires an independent standard to verify that the apparatus isperforming correctly. This synthetic blend of hydrocarbons boil in the temperature range specified inASTM D-86 distillation groups 1 and 2, and a fuel oil that meets the group 4 criteria.The group 1 and 2 standards cover the boiling range 129 - 368 °F (54 - 187 °C) and are verified byconsensus analysis with twelve refinery laboratories. The group 4 standard covers the range from 410 -670 °F (210 - 355 °C). Products are packaged in convenient sizes to meet your laboratory sampleanalysis demands.Cat. No. Group Description Price / UnitASTM-P-126-01 1, 2 Synthetic Distillation Standard $ 160 / 500 mLASTM-P-126-SET 1, 2 Synthetic Distillation Standard 290 / 2 x 500 mLASTM-P-127-01 4 Distillation Standard 160 / 250 mLASTM-P-127-02 4 Distillation Standard 290 / 500 mLOriginally designed forASTM D-86-99aASTM D-92 & Flash & Fire Points by Cleveland Open Cup (COC) &ASTM D-93 Flash Point by Pensky Martin Closed Cup (PMCC)See Method D-56 on this page for the comprehensive line of flash point standardsASTM D-445Viscosity Calibration StandardsCat. No. Viscosity @ 40 °C Price / UnitASTM-P-128-01 4 Cst $ 60 / 500 mLASTM-P-128-02 7 Cst 60 / 500 mLASTM-P-128-03 19 Cst 60 / 500 mLASTM-P-128-04 61 Cst 60 / 500 mLASTM-P-128-05 180 Cst 60 / 500 mLASTM-P-128-06 520 Cst 60 / 500 mLOriginally designed forASTM D-445-97Technical NoteOils are tested inaccordance withASTM D-445Standards of InterestAlso see Cloud PointStandards used for ASTMMethod D-2500 on page 5Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 3


Method 61110151319Physical PropertiesMemberASTMASTM D-611 (Reapproved 1998)Aniline Point StandardsThe accuracy of automated aniline point apparatus can be verified using a range of standards whoseaniline points are determined using ASTM D-611 (Method A) and ASTM D-611 (Method E). Standards arepackaged in 20 mL ampules in an inert atmosphere.Cat. No. Nominal Aniline Point Price / UnitD-611-SET Set include 5 Standards listed below $ 90 / 5 x 20 mLAniline Point Verification SetMethod 611(A)D-611-01 0°C 20 mLD-611-02 30°C 20 mLD-611-03 55°C 20 mLD-611-04 68°C 20 mLD-611-05 94°C 20 mLCat. No. Nominal Aniline Point Price / UnitOriginally designed forD-611-82Technical NoteFor routine purposes pureAniline is packaged in ampulesunder dry nitrogen. Thisminimizes the risk of oxidation.D-611E-SET Set include 3 Standards listed below $ 90 / 3 x 20 mLAniline Point Verification SetMethod 611(E)D-611E-01 43°C 20 mLD-611E-02 62°C 20 mLD-611E-03 77°C 20 mLCat. No.Price / UnitASTM-P-134-PAK Pure Aniline $ 30 / 5 x 15 mLASTM D-1015Freezing Points of High Purity HydrocarbonsSee Method D-2386 page 5 for AccuStandard’s new line of Freezing Point StandardsASTM D-1319Olefin FIA Calibration CurveFIA-CAL-SETCalibration Standards by Fluorescent Indicator Adsorption FIAStd. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Total Olefins 2.0 4.0 5.0 6.0 8.0 10.0 12.0Total Paraffins 57.0 55.0 52.0 51.0 45.0 45.0 40.0Total Aromatics 23.0 24.0 25.0 26.0 29.0 28.0 30.0Total Oxygenate 18.0 17.0 18.0 17.0 18.0 17.0 18.0FIA Paraffin StandardFIA-PARFIA-PAR-5MLVol. %n-Pentane 8n-Hexane 9Cyclohexane 15n-Heptane 14FIA Aromatic StandardFIA-AROFIA-ARO-5MLmix ratioBenzene 4Toluene 32Ethylbenzene 8p-Xylene 8o-Xylene 8$ 30 / 1 x 1 mLSAVE 33% $ 100 / 1 x 5 mL8 comps.Vol. %2,3-Dimethylpentane 14Isooctane 16n-Octane 14n-Decane 7$ 30 / 1 x 1 mLSAVE 33% $ 100 / 1 x 5 mL10 comps.mix ratiom-Xylene 161,2,4-Trimethylbenzene 81,3,5-Trimethylbenzene 81,2,4,5-Tetramethylbenzene 4Naphthalene 4$ 300 / Set of 7 x 1 mLFIA Olefin StandardFIA-OLEFIA-OLE-5MLVol. %1-Pentene 33.32,3-Dimethyl-2-butene 33.3$ 40 / 1 x 1 mLSAVE 40% $ 120 / 1 x 5 mL3 comps.Standards of InterestOriginallydesigned forD-1319-99D-1319MeetsEPA Guidelinesfor RFGAnalysisVol. %1-Heptene 33.3For the mandatory real world QC samplesstipulated in the Method, see page 1-2Technical NoteThe following set of standardshave been prepared for thedetermination of Aromatics,Olefins, Oxygenates andSaturates in petroleum fractionsby Fluorescent IndicatorAdsorption (FIA) IP designation156/95.The final certificate for the FIAcalibration curve lists not onlythe volume percents for thehydrocarbon types, but also theindividual volume percents foreach analyte in the functionalgroup.To further assist thePetrochemist, the weight fractionfor each hydrocarbon type andindividual analyte is listed on thefinal certificate. By providing theindividual weights thePetrochemical chemist can usethe FIA standards for othertypes of instrumentationmeasuring these Petroleumfractions.4 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Physical PropertiesMethod 1744-630423862500MemberASTM D-1744, E-1064, D-4377D-4928, D-6304Water in Liquid Petroleum Products byKarl FischerStandards are available for coulometric Karl Fischer titrations and are packaged in 2 mL, 5 mL, and 20 mL ampules insets of 5 and 10. The following concentrations are available:Cat. No. Description Price / UnitKF-0.6X-5ML-VAP Water content 60 µg/g $ 65 / 10 x 5 mLKF-1X-2ML-VAP Water content 100 µg/g 40 / 10 x 2 mLKF-1X-5ML-VAP Water content 100 µg/g 45 / 10 x 5 mLKF-1X-20ML-PAK Water content 100 µg/g 50 / 5 x 20 mLKF-10X-2ML-VAP Water content 1000 µg/g 40 / 10 x 2 mLKF-10X-5ML-VAP Water content 1000 µg/g 45 / 10 x 5 mLKF-10X-20ML-PAK Water content 1000 µg/g 50 / 5 x 20 mLKF-50X-2ML-VAP Water content 5000 µg/g 40 / 10 x 2 mLKF-50X-5ML-VAP Water content 5000 µg/g 45 / 10 x 5 mLKF-50X-20ML-PAK Water content 5000 µg/g 50 / 5 x 20 mLValue Added Paks (Cat. No.’sending in -VAP) providemultiple single units packagedtogether for both greaterstability and cost savings.Technical NoteMany ASTM Petrochemicalmethods and specificationsreference using QA/QCstandards for water contentmeasurements. AccuStandardhas formulated a comprehensiverange of water standardspackaged in convenient sizes tomeet the various referencedmethods.ASTMASTM D-2386ASTM D-2500Freezing Point Calibration StandardsCat. No. Nominal Freezing Point Price / UnitASTM-P-129-01 - 50 °C $ 110 / 250 mLASTM-P-129-02 - 45 °C 110 / 250 mLCloud Point Calibration StandardsCat. No. Cloud Point, Approx. Value Price / UnitASTM-P-131-01 + 5 °C $ 110 / 250 mLASTM-P-131-02 - 2 °C 110 / 250 mLASTM-P-131-03 - 10 °C 110 / 250 mLASTM-P-131-04 - 15 °C 110 / 250 mLASTM-P-131-05 - 20 °C 110 / 250 mLOriginally designed forD-2386-97Originally designed forD-2500-00Technical NoteVerified by consensus analysis byASTM Method D-2386Technical NoteVerified by consensus analysis byASTM Method D-2500Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 5


ASTM Methods forSulfurAnalysisSulfur StandardsD-2622-98, D-3120-96, D-3246-96, D-4294-98, D-5453-00, D-6334-98, D-6445-99 & Proposed ASTM Sulfur MethodsAccuStandard offers the Petroleum Industry the most complete line of calibration standards designed for today’s Proposed &Promulgated test methods for Sulfur analysis. These calibration standards are designed specifically for the analysis of Sulfur in awide variety of matrices such as #2 diesel fuel, white mineral oil, kerosene, gasoline, crude oil & residual oil.ASTMSULFURTraceability, Quality and CertificationAll Sulfur standards are manufactured from the highest quality raw materials, including well characterized starting materials & thelowest sulfur matrices available from the Petrochemical market. All standards are manufactured on a weight/weight basis usingbalances that are calibrated and verified daily against reference mass standards directly traceable to NIST under test No.822/254480. The concentration of these working level Sulfur standards have established traceability links to NIST SRM’s whereavailable.Convenient PackagingSince applicable concentration ranges will vary based on the instrumentation used & the nature of the sample the standards can beordered as complete sets, individual bottles, or Ready-to-Aspirate AccuShots.AccuShots... Packaged to improve analytical standard integrityAccuStandard is the first standard manufacturer to provide sulfur standards in convenient and Ready-to-Aspirate AccuShot 20 mLsealed ampules. Each 20 mL AccuShot provides the necessary material for calibration curve development or daily QA/QC. Bypurchasing AccuShots the analytical chemist can open a fresh shot for each analysis which eliminates opening and pipettingrepeatedly from a stock bottle. This minimizes contamination and evaporation. These ship with no haz fee for additional savings.ASTM D-5453Test to Low ppbSulfurContact us for a copy of theSouthwest Research InstituteD-5453 Fitness for Use ReportLow Sulfur Standards on following pages6 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Analytical CapabilitiesMWD XRF Sulfur Analyzerin Diesel and Gasoline FuelsLimits of Detection < 1 ppmFast and easy sample preparation.Typical measurement time: 300 sec.Dynamic range: 0-1000 ppm in onecalibration.SULFURNo sample conversion or reagentsrequired.X-Ray Optical Systems, Inc.15 Tech Valley DriveEast Greenbush, NY 12061Tel. 518-880-1500website: www.xos.comXOS SINDIE AnalyzerX-Ray optics enable detection capability wellbeyond traditional XRF techniques. Thesame Monochromatic WD XRF technologyof the SINDIE bench-top sulfur analyzer isavailable in an on-line sulfur analyzer.Exceptional signal-to-backgroundprovides high sensitivity forlow-level sulfur fuelsSULFUR ANALYSIS INULTRA LOW SULFUR FUELSRepeatability:1 ppm 0.5 ppm10 ppm 1.7 ppm100 ppm 5.3 ppm500 ppm 11.7 ppmMonochromatic WDXRF Technology7


SulfurinMineral OilDiesel FuelSulfur StandardsASTM MethodsSulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &Proposed ASTM Sulfur MethodsASTM MethodsSulfur in Mineral OilASTMSULFURSulfur in Heavy Weight Mineral Oil (75 cSt)Sulfur inReady-to-UseConcentration White Mineral Oil Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.Blank 0.000 SWMO-BL-4 SWMO-BL-SHOT100 0.010 SWMO-1X-4 SWMO-1X-SHOT200 0.020 SWMO-2X-4 SWMO-2X-SHOT300 0.030 SWMO-3X-4 SWMO-3X-SHOT400 0.040 SWMO-4X-4 SWMO-4X-SHOT500 0.050 SWMO-5X-4 SWMO-5X-SHOT750 0.075 SWMO-7.5X-4 SWMO-7.5X-SHOT1,000 0.10 SWMO-10X-4 SWMO-10X-SHOT1,500 0.15 SWMO-15X-4 SWMO-15X-SHOT2,000 0.20 -------------------- --------------------------3,000 0.30 SWMO-30X-4 SWMO-30X-SHOT4,000 0.40 -------------------- --------------------------5,000 0.50 SWMO-50X-4 SWMO-50X-SHOT7,000 0.70 SWMO-70X-4 SWMO-70X-SHOT10,000 1.00 SWMO-100X-4 SWMO-100X-SHOT15,000 1.50 SWMO-150X-4 SWMO-150X-SHOT20,000 2.00 SWMO-200X-4 SWMO-200X-SHOT30,000 3.00 SWMO-300X-4 SWMO-300X-SHOT40,000 4.00 SWMO-400X-4 SWMO-400X-SHOT50,000 5.00 SWMO-500X-4 SWMO-500X-SHOT60,000 6.00 SWMO-600X-4 SWMO-600X-SHOTSet of above SWMO-CAL-SET-4 Each AccuShot productCat. No.’s 19 x 4 oz. $ 850 contains 5 x 20 mLampules at the statedIndividual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 eaconc. for $ 60Sulfur in Light Weight Mineral Oil (20 cSt)Sulfur inReady-to-UseConcentration White Mineral Oil Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.Blank 0.000 SWMO-LT-BL-4 SWMO-LT-BL-SHOT100 0.010 SWMO-LT-1X-4 SWMO-LT-1X-SHOT200 0.020 SWMO-LT-2X-4 SWMO-LT-2X-SHOT300 0.030 SWMO-LT-3X-4 SWMO-LT-3X-SHOT400 0.040 SWMO-LT-4X-4 SWMO-LT-4X-SHOT500 0.050 SWMO-LT-5X-4 SWMO-LT-5X-SHOT750 0.075 SWMO-LT-7.5X-4 SWMO-LT-7.5X-SHOT1,000 0.10 SWMO-LT-10X-4 SWMO-LT-10X-SHOT1,500 0.15 SWMO-LT-15X-4 SWMO-LT-15X-SHOT2,000 0.20 -------------------- --------------------------3,000 0.30 SWMO-LT-30X-4 SWMO-LT-30X-SHOT4,000 0.40 -------------------- --------------------------5,000 0.50 SWMO-LT-50X-4 SWMO-LT-50X-SHOT7,000 0.70 SWMO-LT-70X-4 SWMO-LT-70X-SHOT10,000 1.00 SWMO-LT-100X-4 SWMO-LT-100X-SHOT15,000 1.50 SWMO-LT-150X-4 SWMO-LT-150X-SHOT20,000 2.00 SWMO-LT-200X-4 SWMO-LT-200X-SHOT30,000 3.00 SWMO-LT-300X-4 SWMO-LT-300X-SHOT40,000 4.00 SWMO-LT-400X-4 SWMO-LT-400X-SHOT50,000 5.00 SWMO-LT-500X-4 SWMO-LT-500X-SHOT60,000 6.00 SWMO-LT-600X-4 SWMO-LT-600X-SHOTSet of above SWMO-LT-CAL-SET-4 Each AccuShot productCat. No.’s 19 x 4 oz. $ 850 contains 5 x 20 mLampules at the statedIndividual Sulfur 1 -10 units 10 +unitsconc. for $ 60Standards 4 oz Bottle $ 55 ea $ 50 eaASTM MethodsSulfur in #2 Diesel FuelSulfur inReady-to-UseConcentration #2 Diesel Fuel Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.Blank 0.000 SDF-BL-4 SDF-BL-SHOT100 0.010 SDF-1X-4 SDF-1X-SHOT200 0.020 SDF-2X-4 SDF-2X-SHOT300 0.030 SDF-3X-4 SDF-3X-SHOT400 0.040 SDF-4X-4 SDF-4X-SHOT500 0.050 SDF-5X-4 SDF-5X-SHOT750 0.075 SDF-7.5X-4 SDF-7.5X-SHOT1,000 0.10 SDF-10X-4 SDF-10X-SHOT1,500 0.15 SDF-15X-4 SDF-15X-SHOT2,000 0.20 ------------- -------------3,000 0.30 SDF-30X-4 SDF-30X-SHOT4,000 0.40 ------------- -------------5,000 0.50 SDF-50X-4 SDF-50X-SHOT7,000 0.70 SDF-70X-4 SDF-70X-SHOT10,000 1.00 SDF-100X-4 SDF-100X-SHOT15,000 1.50 SDF-150X-4 SDF-150X-SHOT20,000 2.00 SDF-200X-4 SDF-200X-SHOT30,000 3.00 SDF-300X-4 SDF-300X-SHOT40,000 4.00 SDF-400X-4 SDF-400X-SHOT50,000 5.00 SDF-500X-4 SDF-500X-SHOT60,000 6.00 SDF-600X-4 SDF-600X-SHOTSet of above SDF-CAL-SET-4 Each AccuShot productCat. No.’s 19 x 4 oz. $ 850 contains 5 x 20 mLampules at the statedIndividual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 eaconc. for $ 60Technical NoteSulfur conc. calculated from % sulfur in di-n-butyl sulfideReady-to-UseAccuShots... Packaged to improve analyticalstandard integrityAccuStandard is the first standard manufacturer toprovide sulfur standards in convenient and Ready-to-Aspirate AccuShot 20 mL sealed ampules. Each 20 mLAccuShot provides the necessary material for calibrationcurve development or daily QA/QC. By purchasingAccuShots the analytical chemist can open a fresh shotfor each analysis which eliminates opening and pipettingrepeatedly from a stock bottle. This minimizescontamination and evaporation. These ship with no hazfee for additional savings.Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted byASTM Method see beginning of Catalog8Quality System is Certified to comply with the International ISO 9001 Quality Standard


MethodSulfur StandardsASTM MethodsSulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &Proposed ASTM Sulfur MethodsASTM SulfurMethods for inKerosene SulfurASTM MethodsSulfur in KeroseneSulfur in Light Distillate KeroseneSulfur in Light Ready-to-UseConcentration Distillate Kerosene Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.Blank 0.000 SK-BL-4 SK-BL-SHOT100 0.010 SK-1X-4 SK-1X-SHOT200 0.020 ---------------300 0.030 SK-3X-4 SK-3X-SHOT400 0.040 ---------------500 0.050 SK-5X-4 SK-5X-SHOT750 0.075 SK-7.5X-4 SK-7.5X-SHOT1,000 0.10 SK-10X-4 SK-10X-SHOT1,500 0.15 ---------------2,000 0.20 SK-20X-4 SK-20X-SHOT3,000 0.30 SK-30X-4 SK-30X-SHOT4,000 0.40 SK-40X-4 SK-40X-SHOT5,000 0.50 SK-50X-4 SK-50X-SHOT7,000 0.70 ---------------10,000 1.00 SK-100X-4 SK-100X-SHOT15,000 1.50 ---------------20,000 2.00 SK-200X-4 SK-200X-SHOT30,000 3.00 ---------------40,000 4.00 ---------------50,000 5.00 ---------------60,000 6.00 ---------------Sulfur in Heavy Distillate KeroseneSulfur in HeavyConcentration Distillate Keroseneµg/g Wt. % Cat. No.Blank 0.000 SK-HD-BL-4100 0.010 SK-HD-1X-4200 0.020 SK-HD-2X-4300 0.030 SK-HD-3X-4400 0.040 SK-HD-4X-4500 0.050 SK-HD-5X-4750 0.075 SK-HD-7.5X-41,000 0.10 SK-HD-10X-41,500 0.15 SK-HD-15X-42,000 0.20 SK-HD-20X-43,000 0.30 SK-HD-30X-44,000 0.40 SK-HD-40X-45,000 0.50 SK-HD-50X-47,000 0.70 SK-HD-70X-410,000 1.00 SK-HD-100X-415,000 1.50 SK-HD-150X-420,000 2.00 SK-HD-200X-430,000 3.00 SK-HD-300X-440,000 4.00 SK-HD-400X-450,000 5.00 SK-HD-500X-460,000 6.00 SK-HD-600X-4Technical NoteSulfur concentrationcalculated from % sulfurin di-n-butyl sulfide.Standards of InterestFor the mandatory realworld QC samplesstipulated in the Method,see pages 1- 2.ASTM SULFURSet of above SK-CAL-SET-4 Each AccuShot productCat. No.’s 12 x 4 oz. $ 500 contains 5 x 20 mLIndividual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 eaampules at the statedconc. for $ 60Set of above SK-HD-CAL-SET-4Cat. No.’s 21 x 4 oz. $ 950Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 eaFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 9


Sulfur StandardsASTM MethodsSulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &Proposed ASTM Sulfur MethodsASTM 2789ASTM MethodsIndividual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 75 ea $ 65 eaSulfur Calibration StandardsSulfur in Crude Oil StandardsConcentrationSulfur in Crude Oilµg/g Wt. % Cat. No.1,000 0.10 SCO-10X-42,500 0.25 SCO-25X-45,000 0.50 SCO-50X-410,000 1.00 SCO-100X-420,000 2.00 SCO-200X-430,000 3.00 SCO-300X-440,000 4.00 SCO-400X-450,000 5.00 SCO-500X-4Set of aboveSCO-CAL-SET-4Cat. No.’s 8 x 4 oz. $ 500Sulfur in Residual Oil StandardsConcentrationSulfur in Crude Oilµg/g Wt. % Cat. No.3,500 0.35 SRO-35X-47,000 0.70 SRO-70X-410,000 1.00 SRO-100X-415,000 1.50 SRO-150X-420,000 2.00 SRO-200X-430,000 3.00 SRO-300X-440,000 4.00 SRO-400X-4Set of aboveSRO-CAL-SET-4Cat. No.’s 7 x 4 oz. $ 450Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 75 ea $ 65 eaTechnical NoteAccuStandard's TechnicalService Dept. can provideReady-to-Inject working levelcalibration standards to meetunique laboratory applications.Call or fax us your standardrequirements.ASTM SULFURASTM MethodsSulfur StandardsTotal Sulfur in Aromatic Compoundsby Hydrogenolysis & RateometricColorimetryASTM-P-0010-PAK1000 µg/mL in TolueneSulfur (as Thiophene)$ 75 / 5 x 1 mLTrace Quantities of Sulfur in LiquidAromatic Hydrocarbons by OxidativeMicrocoulometryASTM-P-0020-PAK1000 µg/mL in XylenesSulfur (as Dibenzothiophene)$ 75 / 5 x 1 mLASTM-SSTD-A/B-SET$ 100 / 10 x 2 mLThe set contains the following 10 standards in isooctaneCat. No. Description UnitASTM-SSTDA-BL Sulfur Blank 2 mLASTM-SSTDA-01 Sulfur @ 0.5 µg/g in Isooctane 2 mLASTM-SSTDA-02 Sulfur @ 1.0 µg/g in Isooctane 2 mLASTM-SSTDA-03 Sulfur @ 2.5 µg/g in Isooctane 2 mLASTM-SSTDA-04 Sulfur @ 5.0 µg/g in Isooctane 2 mLASTM-SSTDB-BL Sulfur Blank 2 mLASTM-SSTDB-04 Sulfur @ 5.0 µg/g in Isooctane 2 mLASTM-SSTDB-05 Sulfur @ 10.0 µg/g in Isooctane 2 mLASTM-SSTDB-06 Sulfur @ 25.0 µg/g in Isooctane 2 mLASTM-SSTDB-07 Sulfur @ 50.0 µg/g in Isooctane 2 mLASTM D-2789Composition Test MixD-2789-CTMD-2789-CTM-PAK(Vol. %)2-Methylpentane 7.22,4-Dimethylpentane 9.4n-Octane 16.6Methylcyclopentane 7.1Methylcyclohexane 10Hydrocarbon Types in Low Olefinic Gas by MS$ 40 / 1 x 1 mLSAVE 20% $ 160 / 5 x 1 mL9 comps.(Vol. %)cis-1,2-Dimethylcyclohexane 15.5Benzene 7.7Toluene 10p-Xylene 16.5Originallydesigned forD-2789-95Technical NoteBoth the actual volume %ratio and the final weightfractions for each analyte willbe listed on the certificate.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 11


PIANOPIANOPONAPNAPIANO, PONA, PNAAccuStandard has introduced the PIANO line of quantitative and qualitative Petrochemical Standards for class type analysis of petrochemicalsamples or product streams. PIANO analysis involves the determination of the percentage of the following five fractions Paraffins, Isoparaffins,Aromatics, Naphthenes, and Olefins.PONA analysis involves analyzing the naphtha sample for Paraffins, Olefins, Naphthenes, and Aromatics. If the Isoparaffins and Olefins are notpresent, the analysis is just for PNA.The PIANO line of standards is used to determine quantitative and qualitative retention times and indices as well as to monitor response factorswithin the hydrocarbon blend. These complex mixes are prepared from materials of the highest available purity, accurate to four decimal places,and include a detailed data sheet on the formulation composition. The typical range for the analytes in each formulation has been provided foreach catalog item. The exact composition on a weight % basis for each analyte has been provided on the certificate, and a disk deliverablespreadsheet is available on request.Mini Inert Valves SealThe PIANO standards are supplied in convenient to use crimp top vials with Viton septa that resistmineral oil, aliphatic, aromatics hydrocarbons, and higher temperatures. Mini inert valve seals areavailable for an additional $ 25 vial. To order, add “-MIV” to any of the PIANO catalog numbers onthis page.PIANO, PONA, PNA AnalysisPIONAPIANO MixtureASTM-P-0030 $ 250 / 100 µL135 comps.The PIANO formulation contains the n-Paraffins,Isoparaffins,Aromatics, Naphthenes, and Olefins from thefive Cat. No.’s: ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034, ASTM-P-0035Approximate weight percentages for the total: n-Paraffins18.5%, Isoparaffins 17.9%, Aromatics 23.6%, Naphthenes20.9%, Olefins 19.0%.The actual certificate will list the weight % for all analytesin the formulation.High Aromatic PIAN BlendASTM-P-0037 $ 120 / 100 µL110 comps.High Aromatic blend contains the PIAN componentsblended to resemble a reformate. The actual certificatewill have the exact weight % for each analyte accurateto four decimal places. Analyte list is drawn fromCat. No.’s: ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034Low Aromatic PIAN BlendASTM-P-0036 $ 120 / 100 µL110 comps.Low Aromatic blend contains the PIAN componentsblended to resemble a light naphtha. The actual certificatewill have the exact weight % for each analyte accurate tofour decimal places. Analyte list is drawn fromCat. No.’s: ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034Standards of InterestFor individual PIANO descriptions see next pageAccuStandard, Your Standards and Technical Information Source!Total PetroleumHydrocarbon PatternRecognition StandardsBOOK-TPH $ 35Analytical Standards andReference Material for all209 PCB CongenersS-3571 $ 2512 Quality System is Certified to comply with the International ISO 9001 Quality Standard


PIANO, PONA, PNAPIANOPIANOPONAPNAPIANO, PONA, PNA AnalysisPIANO Mix SetASTM-PIANO-SET $ 700 / 6 x 100 µLSet includes the following Cat. No.:ASTM-P-0030, ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034, ASTM-P-0035Special PackagingMini inert valve seals are available for an additional $ 25 / vial.To order, add “-MIV” to any of the PIANO cat.# on this page.PIANO n-Paraffins MixASTM-P-0031 $ 80 / 100 µL11 paraffins listed below at varying Wt. %typically in the range from 7.0 to 11.0 Wt. %.The actual certificate will have the exact Wt.% for each analyte.Typ. Wt. %n-Pentane 9.4375n-Hexane 9.5661n-Heptanea 9.8048n-Octane 9.5518n-Nonane 9.0482n-Decane 9.2517n-Undecane 9.3172n-Dodecane 9.1855n-Tridecane 8.9332n-Tetradecane 8.7989n-Pentadecane 7.1057PIANO Isoparaffins MixASTM-P-0032 $ 120 / 100 µL35 Isoparaffins listed below at varying Wt. % typically in the range from 0.5 to 6.0 Wt. %. The actualcertificate will have the exact Wt. % for each analyte.Typ. Wt. %Isopentane 2.19282,3-Dimethylbutane 0.44662-Methylpentane 3.28153-Methylpentane 5.38652,2-Dimethylpentane 1.77472,4-Dimethylpentane 3.69932,2,3-Trimethylbutane 3.92913,3-Dimethylpentane 1.18482-Methylhexane 2.23842,3-Dimethylpentane 1.78833-Methylhexane 1.67083-Ethylpentane 0.5080Typ. Wt. %2,2-Dimethylhexane 1.30612,5-Dimethyl hexane 3.69752,2,3-Trimethylpentane 1.73712,4-Dimethylhexane 1.62522,3-Dimethylhexane 1.62122-Methylheptane 4.40734-Methylheptane 3.20153-Methylheptane 5.51863-Ethylhexane 0.69993,3-Dimethylheptane 1.70112,5-Dimethylheptane 5.67313,5-Dimethylheptane 0.7565Typ. Wt. %2,3-Dimethylheptane 1.48703,4-Dimethylheptane 3.74502-Methyloctane 3.75763-Methyloctane 5.60203,3-Diethylpentane 1.57552,2-Dimethyloctane 3.41353,3-Dimethyloctane 3.25822,3-Dimethyloctane 3.88423-Ethyloctane 3.74822-Methylnonane 3.71443-Methylnonane 5.7687PIANO Aromatics MixASTM-P-0033 $ 120 / 100 µL38 Aromatics listed below at varying Wt. %typically in the range from 0.2 to 7.0 Wt. %.The actual certificate will have the exactWt. % for each analyte.Typ. Wt. %Benzene 7.1437Toluene 4.5738EthylBenzene 6.7670m-Xylene 2.2259p-Xylene 4.4815o-Xylene 2.2519Isopropylbenzene 2.2248n-Propylbenzene 4.49791-Methyl-3-ethylbenzene 2.22431-Methyl-4-ethylbenzene 2.22061,3,5-Trimethylbenzene 1.10761-Methyl-2-ethylbenzene 2.26111,2,4-Trimethylbenzene 2.2535tert-Butylbenzene 4.5310Isobutylbenzene 4.4216sec-Butylbenzene 2.23681-Methyl-3-isopropylbenzene 1.10661-Methyl-4-isopropylbenzene 1.06681-Methyl-2-isopropylbenzene 1.12411-Methyl-3-n-propylbenzene 2.11351-Methyl-4-n-propylbenzene 2.2336n-Butylbenzene 2.20871,2-Diethylbenzene 1.09471-Methyl-2-n-propylbenzene 2.26411,4-Dimethyl-2-ethylbenzene 2.28031,3-Dimethyl-5-ethylbenzene 2.28581,2-Dimethyl-4-ethylbenzene 2.25581,3-Dimethyl-2-ethylbenzene 1.14161,2-Dimethyl-3-ethylbenzene 2.18641,2,4,5-Tetramethylbenzene 0.23602-Methylbutylbenzene 1.1453trans-1-Butyl-2-methylbenzene 0.7641n-Pentylbenzene 4.4828t-1-Butyl,3,5-dimethylbenzene 2.1641t-1-butyl-ethylbenzene 2.23221,3,5-Triethylbenzene 4.56711,2,4-Triethylbenzene 1.1087n-Hexylbenzene 4.5029PIANO Naphthenes MixASTM-P-0034 $ 120 / 100 µL30 Napthenes listed below at varying Wt. %typically in the range from 0.5 to 8.0 Wt. %. Theactual certificate will have the exact Wt. % foreach analyte.Typ. Wt. %Cyclopentane 4.9143Methylcyclopentane 3.2829Cyclohexane 5.32681,1-Dimethylcyclopentane 3.4612cis-1,3-Dimethylcyclopentane 0.5963trans-1,2-Dimethylcyclopentane 1.4715trans-1,3-Dimethylcyclopentane 2.7531Methylcyclohexane 5.6091Ethylcyclopentane 3.5534ctc-1,2,3-Trimethylcyclopentane 1.5859cct-1,2,4-Trimethylcyclopentane 3.7208ctc-1,2,4-Trimethylcyclopentane 1.6467trans-1,4-Dimethylcyclohexane 3.64991-Ethyl-1-methylcyclopentane 1.0554trans-1,2-Dimethylcyclohexane 1.6537ccc-1,2,3-Trimethylcyclopentane 0.7971Isopropylcyclopentane 3.5042cis-1,2-Dimethylcyclohexane 3.7159n-Propylcyclopentane 3.6438ccc-1,3,5-Trimethylcyclohexane 3.52631,1,4-Trimethylcyclohexane 3.6791ctt-1,2,4-Trimethylcyclohexane 3.6107ctc-1,2,4-Trimethylcyclohexane 3.50691,1,2-Trimethylcyclohexane 3.3354Isobutylcyclopentane 3.7123Isopropylcyclohexane 5.7233n-Butylcyclopentane 3.6944Isobutylcyclohexane 5.6729t-1-Methyl-2-propylcyclohexane 3.8434t-1-Methyl-2-(4MP)cyclopentane 3.7534PIANO MixturePIANO Olefins MixASTM-P-0035 $ 120 / 100 µL25 Olefins listed below at varying Wt. %typically in the range from 1.2 to 9.0 Wt. %.The actual certificate will have the exact Wt. %for each analyte.Typ. Wt. %3-Methyl-1-butene 1.93961-Pentene 4.13552-Methyl-1-butene 1.44402-Methyl-1,3-butadiene 2.3889trans-2-Pentene 1.8034cis-2-Pentene 1.97924-Methylpentene-1 3.43721-Hexene 7.0484trans-2-Hexene 1.73022-Methylpentene-2 3.3901cis-2-Hexene 3.87651-Heptene 7.6134trans-3-Heptene 3.3469cis-3-Heptene 5.8657trans-2-Heptene 3.7217cis-2-Heptene 5.76791-Octene 7.6901trans-2-Octene 1.9432cis-2-Octene 3.95021-Nonene 7.6425trans-3-Nonene 1.9972cis-3-Nonene 4.0042trans-2-Nonene 1.9848cis-2-Nonene 2.79521-Decene 8.2053Production NoteAccuStandard may add and/or subtractPIANO Analytes and vary the weight %for each Analyte. The certificate willreflect the exact Analyte composition.ASTM-P-0030 $ 250 / 100 µL (135 comps.)The PIANO formulation contains the n-Paraffins, Isoparaffins,Aromatics, Naphthenes, and Olefins fromthe Five Cat. No.’s: ASTM-P-0031, ASTM-P-0032, ASTM-P-0033, ASTM-P-0034, ASTM-P-0035Approximate weight %’s for the total: n-Paraffins 18.5%, Isoparaffins 17.9%, Aromatics 23.6%,Naphthenes 20.9%, Olefins 19.0%. The certificate lists the weight % for all analytes in the formulation.PIONAFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 13


Method 2887DHADetailed Hydrocarbon AnalysisMemberDetailed Hydrocarbon AnalysisASTMProposed ASTM Method for Detailed Hydrocarbon Analysis (DHA)Determination of Individual Components and Groups of Components in Spark Ignition Engine fuels byHigh Efficiency Open Tubular Column Gas Chromatography (Detailed Hydrocarbon Analysis)Detailed Hydrocarbon Analysis (includes oxygenates)ASTM-P-0038 $ 120 / 100 µL30 Analytes listed below at varying targeted weight %. The actual certificate will has the exact Wt. % for each analyte.EthanolPentane2-Methyl-2-propanol2-Methylbutene2,3-DimethylbutaneMethyl-t-butyl etherHexaneMethylcyclopenteneBenzeneCyclohexane3-Ethylpentanet-1,2-DimethylcyclopentaneHeptane2,2,3-Trimethylpentane2,3,3-TrimethylpentaneToluenep-XyleneEthylbenzeneOctane2,3-DimethylheptaneNonane5-Methylnonane1-Ethyl-2-methylbenzeneDecaneUndecane1,2,3,5-TetramethylbenzeneNaphthaleneDodecane1-MethylnaphthaleneTridecaneDHA - PONA-VI (PONA 6) is aqualitative mixture of variousgasoline and refinery materialsprepared to provide nearly everycomponent that may be encounteredin feedstock and finished gasolines.Some oxygenates have been addedto allow this blend to be used forDHA method setup. This blendcontains approximately 450components (peaks).ASTM-P-0139 $ 120 / 100 µLASTM D-2887Calibration MixDRH-002NDRH-002N-10XWt. %n-Hexane 6n-Heptane 6n-Octane 8n-Nonane 8n-Decane 12n-Undecane 12n-Dodecane 12n-Tetradecane 12n-Hexadecane 10Column Test MixtureBoiling Range Distribution of Petroleum Fractions by GC$ 10 / 100 mg$ 40 / 1 gm17 comps.Wt. %n-Octadecane 5n-Eicosane 2n-Tetracosane 2n-Octacosane 1n-Dotriacontane 1n-Hexatriacontane 1n-Tetracontane 1n-Tetratetracontane 1ASTM-D2887$ 10 / 1 x 1 mL1% v/v in n-Octane 2 comps.n-Hexadecanen-OctadecaneComplete Hydrocarbon AnalysisHydrocarbon WindowDefining Standard*DRH-008S-R2$ 65 / 1 x 1 mLDRH-008S-R2-PAK SAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecaneHeptadecaneOctadecanePristaneNonadecanePhytaneEicosaneHeneicosaneDocosaneTricosaneTetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosaneTriacontanen-HentriacontaneDotriacontaneTritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontaneOriginally designed for D-2887-99ASTM D-2887 Reference GasOil Sample Lot #2D-2887-REFOILTechnical Note$ 35 / 1 x 1 mLThis sample is a petroleum fractionhaving a boiling range from 250°F to850°F, evaluated in round robinstudies by the ASTM D-02committee. Use of this sample andthe supplied ASTM boiling rangeconsensus values helps to evaluatesystem performanceFuel Oil Degradation/RetentionTime Mix for Quantification ofC 17 /Pristane & C 18 /Phytane ratiosDRH-005S-10X$ 20 / 1 x 1 mL2.0 mg/mL each in CH 2 Cl 2 : CS 2 (1:1) 4 comps.HeptadecaneOctadecanePhytane (2,6,10,14-Tetramethylhexadecane)Pristane (2,6,10,14-Tetramethylpentadecane)Calibration Solution *DRH-002S-R1$ 50 / 1 x 1 mLDRH-002S-R1-PAK SAVE 20% $ 200 / 5 x 1 mLAt stated conc. in Chloroform17 comps.Technical NoteAccuStandard offers a hydrocarbon window defining standard with the C 8 to C 40 odd andeven Alkanes. As an added benefit, AccuStandard included pristane and phytane in theformulation. Use of this one standard measuring the C 17 / pristane and C 18 / phytane ratiocan be used to estimate degradation of fuel oil.If you prefer, AccuStandard has also developed a fuel oil degradation mixture containingjust the four required analytes to determine the C 17 /pristane and C 8 / phytane ratioCatalog Numbers DRH-005S-10X.NEWCalibration Solution *NEWDRH-002S-R2$ 50 / 1 x 1 gmDRH-002S-R2-PAKSAVE 20% $ 200 / 5 x 1 gm1 % Wt./Wt. each in Chloroform 20 comps.µg/mLn-Hexane 600n-Heptane 600n-Octane 800n-Nonane 800n-Decane 1200n-Undecane 1200n-Dodecane 1200n-Tetradecane 1200n-Hexadecane 1000µg/mLn-Octadecane 500n-Eicosane 200n-Tetracosane 200n-Octacosane 100n-Dotriacontane 100n-Hexatriacontane 100n-Tetracontane 100n-Tetratetracontane 100n-Tetratetracontanen-Tetracontanen-Hexatriacontanen-Dotriacontanen-Octacosanen-Tetracosanen-Eicosanen-Octadecanen-Hexadecanen-Tetradecanen-Dodecanen-Undecanen-Decanen-Nonanen-Octanen-Heptanen-Hexanen-Pentanen-Pentadecanen-Heptadecane* Can be shipped by Air and Sea14 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Petrochemical StandardsMethodSIM DISMemberSimulated Distillation (SIM DIS) and Proposed Motor Oil Volatility MethodAccuStandard has developed an extensive line of SIM DIS standards for normal and high temperature analytical requirements when generatingboiling point versus retention time calibration curves. Since normal paraffins above Alkane C60 are not readily available, Polywax 500, Polywax655, Polywax 850 and Polywax 1000 standards have been incorporated to perform SIM DIS analysis of heavy petroleum fractions with boilingpoints up to 1350 °F. If you require additional analytes added to the formulations for extended SIM DIS work, use our custom quotation requestform located in the back of the catalog.SIM DIS StandardsSimulated DistillationStock SIM DIS Paraffin SolutionASTM-P-0050Wt. %n-Pentane 6.66n-Hexane 6.66n-Heptane 6.66n-Octane 6.66n-Nonane 6.66n-Decane 6.66n-Undecane 6.66Polywax 500 ®ASTM-P-0051N-2GPolywax 500Polywax 655 ®ASTM-P-0053N-2G$ 85 / 1 x 5 mL14 comps.Wt. %n-Dodecane 13.33n-Tetradecane 6.66n-Pentadecane 6.66n-Hexadecane 6.66n-Heptadecane 6.66n-Octadecane 6.66n-Eicosane 6.66$ 20 / 2 grams$ 20 / 2 gramsWorking Level SIM DIS Paraffin Solutionwith Polywax 500ASTM-P-0052ASTM-P-0052-PAKAt stated conc. in Carbon disulfideWt. %n-Pentane 0.0333n-Hexane 0.0333n-Heptane 0.0333n-Octane 0.0333n-Nonane 0.0333n-Decane 0.0333n-Undecane 0.0333n-Dodecane 0.0666Polywax 850 ®ASTM-P-0137N-2GPolywax 850Polywax 1000 ®ASTM-P-0138N-2G$ 40 / 1 x 1 mLSAVE 20% $ 160 / 5 x 1 mL15 comps.Wt. %n-Tetradecane 0.0333n-Pentadecane 0.0333n-Hexadecane 0.0333n-Heptadecane 0.0333n-Octadecane 0.0333n-Eicosane 0.0333Polywax 500 0.5$ 20 / 2 grams$ 20 / 2 gramsStandards of InterestSee ASTM Methods D-3710,D-5307, D-5442, D-6352 foradditional calibrationstandards for hydrocarbonanalysis.Technical NoteAccuStandard designed thefollowing formulations for aProposed ASTM Method underdevelopment for Motor OilVolatility analysis & SIM DISapplications.ASTMPolywax 655Polywax 1000For our complete line ofOrganic Standards,request a copy of ourOrganic CatalogFor our complete line ofInorganic Standards,request a copy of ourInorganics CatalogFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 15


Method 31203230,32313237MemberASTM StandardsASTM D-3120 & D-3246Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative MicrocoulometryASTMSulfur Calibration SetD-3120-92-CAL-SETIn Isooctane$ 75 / set of 8 x 1 mLCat. No. Sulfur Conc. Sulfur Wt.%D-3120-BL Blank BlankD-3120-92-1X 1 µg/g 0.0001D-3120-92-3X 3 µg/g 0.0003D-3120-92-10X 10 µg/g 0.0010D-3120-92-30X 30 µg/g 0.0030D-3120-92-50X 50 µg/g 0.0050D-3120-92-75X 75 µg/g 0.0075D-3120-92-100X 100 µg/g 0.010Originally designed forD-3120-96D-3246-96Technical NoteWell characterized di-n-butyl sulfide is usedin a low sulfur Isooctane matrix for thiscalibration set.Standards of InterestsSee page 1 for AccuStandard’scomprehensive line of CertifiedSulfur calibration standards,AccuPetroCheck, andAccuPetroTest quality controlproducts.ASTM D-3230Salts in Crude OilMixed Salt SolutionD-3230-89-1$ 75 / 100 mLD-3230-89-5$ 150 / 500 mLAt stated conc. in Alcohol Solution (1-butanol : MeOH) (ratio 63:37) tr. H 2 O 3 comps.Originally designed forD-3230-99Calcium chlorideMagnesium chloride10 µg/mL20 µg/mLSodium chloride70 µg/mLASTM D-3231 Phosphorus in GasolineOriginally designed for D-3231-99Element Quantity Cat. No. PriceMatrixConc.Phosphorus 100 mL ICP-41W-1 $ 34H 2 O1000 µg/mLPhosphorus 500 mL ICP-41W-5 $ 67H 2 O1000 µg/mLD-3231MeetsEPA Guidelinesfor RFGAnalysisASTM D-3237Lead in Gasoline by AA SpectroscopyLead Standard Calibration CurveD-3237-CAL-SETSet includes the following Catalog Numbers:$ 210 / 4 x 100 mLOriginally designed forD-3237-97Cat. No. Description Price / UnitD-3237-01 Blank 1% Aliquot 336/MIBK $ 20 / 100 mLD-3237-02 0.02 g Pb / gal ( 5.3 mg Pb/ L) in 1% Aliquat 336 / MIBK $ 80 / 100 mLD-3237-03 0.05 g Pb / gal ( 13.2 mg Pb/ L) in 1% Aliquat 336 / MIBK $ 80 / 100 mLD-3237-04 0.10 g Pb / gal ( 26.4 mg Pb/ L) in 1% Aliquat 336 / MIBK $ 80 / 100 mLD-3237MeetsEPA Guidelinesfor RFGAnalysisReady-to-Inject Petrochemical Standards and Calibration CurvesReduce CostsIncrease Time Spent for Sample AnalysisAre Validated Against Independent LotsInclude Internal Standards or SurrogatesFollow ASTM Method GuidelinesAllow Direct Transfer to Autosampler VialsReady-to-InjectWorking Level Standards &Continuing Calibration Check (CCC)16 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 3246334035243605MemberASTM D-3246Sulfur in Petroleum Gas by Oxidative MicrocoulometrySee pages 6 - 11 for AccuStandards comprehensive line of certified sulfur calibration standardsASTM D-3340Lithium & Na in Lubricating Greases by Flame PhotometerASTMAccuStandard AccuTrace brand AA standards are produced under our rigorous ISO 9001 quality system toexacting specifications. Each standard is prepared from high purity starting materials; deionized water andhigh purity acids. Every standard is instrumentally assayed to verify 1000 ppm concentration of specifiedelement; Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease ofrecord keeping and availability at audits.Originally designed forD-3340-98Element Unit Cat. No. PriceMatrix1,000 µg/mLLithium * 100 mL AA30H-1 $ 12HCl 500 mL AA30H-5 30Sodium * 100 mL AA54H-1 13HCl 500 mL AA54H-5 33ASTM D-3524 (Reapproved 1999)D-3524 Calibration CurveD-3524-CAL-SET-5MLD-3524-CAL-SET-10MLTechnical Note* For your convenience these elements arealso available in HNO 3 . To order HNO 3change the H to N at the end of the Cat. No.Diesel Fuel Diluent in Used Diesel Engine Oils by GC$ 150 / set of 6 x 5 mL$ 250 / set of 6 x 10 mLOriginally designed forD-3524-90Analyte Standard 1 Standard 2 Standard 3 Standard 4 Standard 5 Standard 6Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. %# 2 Diesel 10 7.5 5 2.5 1 030 W Motor oil 90 92.5 95 97.5 99 100Test toLow ppbSulfurSee Pages 6-11WEAR METALSInternal Standard SolutionD-3524-IS-10ML$ 25 / 1 x 10 mLD-3524-IS-10ML-PAK SAVE 20% $ 100 / 5 x 10 mLAt stated conc. in n-Heptane2 comps.Wt. / Wt. %n-Decane 1.0n-Octadecane 0.2Mid Level Daily QC SolutionD-3524-QC-10ML$ 30 / 1 x 10 mL2 comps.Wt. / Wt. %# 2 Diesel 5.030 W Motor oil 95Column Resolution MixD-3524-CR$ 10 / 1 x 1 mLD-3524-CR-PAKSAVE 20% $ 40 / 5 x 1 mLAt stated conc. in n-Heptane2 comps.Wt. / Wt. %n-Hexadecane 1.0n-Octadecane 1.0ASTM D-3605(Reapproved 1995)D-3605-91 Trace Metals StandardTrace Metals in Gas Turbine Fuels by AA &Flame Emission SpectroscopyD-3605-91-1$ 165 / 1 x 100 mLAt stated conc. in 1,2,3,4-Tetrahydronaphthalene 4 comps.Originally designed forD-3605-91Standards of InterestsSee Table of Contents for theWear Metals Group pagesNa (Sodium)Pb (Lead)(250 µg/mL)(250 µg/mL)Ca (Calcium)V (Vanadium)(250 µg/mL)(250 µg/mL)Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 17


Method 36063610,ASTM StandardsMemberASTM D-3606Benzene & Toluene in Finished Motor & Aviation Gasoline by GCOriginally designed forD-3606-99ASTMAromatics Quantitative Calibration Standard (without Internal Standards)D-3606-SET-25ML$ 800 / set of 7 x 25 mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 0.06 - 5.0 5.00 2.50 1.25 0.67 0.33 0.12 0.06Toluene 0.5 - 20 20.00 15.00 10.00 5.00 2.50 1.00 0.50Isooctane 75.00 82.50 88.75 94.33 97.17 98.88 99.44D-3606MeetsEPA Guidelinesfor RFGAnalysisAromatics Quantitative Calibration Standard (with Internal Standard: MEK)D-3606/IS-SET$ 115 / set of 7 x 1 mLD-3606/IS-SET-2ML$ 190 / set of 7 x 2 mLD-3606/IS-SET-2ML-PAK$ 760 / 5 x (7 x 2) mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624Methyl ethyl ketone (Internal Std.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0Gasoline Refinery Quality Control StandardsDaily Quality Control Standard(with Internal Standard: MEK)D-3606-QC/IS-10ML$ 75 / 1 x 10 mLD-3606-QC/IS-10ML-PAK$ 300 / 5 x 10 mLEach at stated quantities4 comps.Compound Target Vol. %Benzene 0.6432Toluene 4.8000Isooctane 90.5568Methyl ethyl ketone (ISTD) 4.0100Daily Quality Control Standard(without Internal Standard)D-3606-QC-25ML$ 125 / 1 x 25 mLD-3606-QC-25ML-PAK$ 600 / 5 x 25 mLEach at stated quantities3 comps.Compound Target Vol. %Benzene 0.67Toluene 5.00Isooctane 94.33100Aromatics Quantitative Calibration Standard (w/ Internal Standard: sec Butanol)D-3606/IS2-SETD-3606/IS2-SET-PAKGasoline Refinery Quality Control StandardsDaily Quality Control StandardDaily Quality Control Standard(with Internal Standard: sec Butanol) (without Internal Standard)D-3606-QC-IS2-25ML$ 125 / 1 x 25 mLD-3606-QC-IS2-25ML-PAK$ 600 / 5 x 25 mLEach at stated quantities4 comps.Compound Target Vol. %Benzene 0.6432Toluene 4.8000Isooctane 90.5568sec-Butanol (ISTD) 4.0100$ 115 / set of 7 x 1 mL$ 500 / 5 x (7 x 1) mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624sec Butanol (Internal Standard) 4.0 4.0 4.0 4.0 4.0 4.0 4.0D-3606-QC-25ML$ 125 / 1 x 25 mLD-3606-QC-25ML-PAK$ 600 / 5 x 25 mLEach at stated quantities3 comps.Compound Target Vol. %Benzene 0.67Toluene 5.00Isooctane 94.33100Technical NoteDue to changes in the possibleuse of other oxygenates likeethanol added to gasoline,AccuStandard formulated anew calibration curve usingsec-butanol as an InternalStandard. The use of this newISTD minimizes coelutioncaused by the oxygenate(s)and pre column - standardcolumn configuration in the GCsystem.ASTM D-3610Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric TitrationCobalt Oxide StandardD-3610-93-1$ 50 / 1 x 100 mLCobalt oxide @ 1500 µg/mL in WaterOriginally designed forD-3610-88 (Re-Approved 1993)18 Quality System is Certified to comply with the International ISO 9001 Quality Standard


On-Line OrderingThere is an easier way to get Chemical Reference Standardse-Standards ® from AccuStandard.com5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 30,000 products.Search by:ASTMCatalog NumberSingle or Multiple Components,Method (EPA, ASTM, etc.)Chemical Category (Organic, Inorganic, Petroleum, etc.)Other Companies’ Part NumberLog on to www.accustandard.com and see how easy it is.Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply to online orders, seedetails on website.On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need, we can prepare Custom Formulationsand Custom Packaging for both Organic and Inorganic needs.See our Website for more info.Over 30,000 Standardsjust a click awayCross Reference TableASTM IP ISO DIN JIS AFNOR sorted byASTM Method see beginning of CatalogTest toLow ppbSulfurSee Pages 6-11Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 19


Method 37103798, 3831ASTM StandardsMemberASTMASTM D-3710 (Reapproved 1999)Qualitative Calibration StandardD-3710-QUALD-3710-QUAL-PAKApprox.Wt./ Wt. %n-Butane 4.5n-Butylbenzene 3.2n-Decane 3.22,4-Dimethylpentane 5.4n-Dodecane 3.2n-Heptane 9.7n-Hexane 5.42-Methylbutane 9.72-Methylpentane 5.42-Methylpropane 1.5$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mL19 comps.Approx.Wt./ Wt. %n-Octane 5.4n-Pentadecane 2.2n-Pentane 7.6n-Propane 1.5n-Propylbenzene 4.3n-Tetradecane 2.2Toluene 10.8n-Tridecane 2.2p-Xylene 13Boiling Range Distribution of Gasoline & Gasoline Fractions by GCThis SIM DIS (Simulated Distillation or GCD) Method is used to determine the boiling range distribution ofgasoline and gasoline components. ASTM Method D-3710 is used for petroleum products and fractionswith a final boiling point of 500°F (260°C) or lower. By having an insight into the composition of thegasoline blend, essential data for the calculation of vapor pressure and a prediction of the D-86 distillationcurve can be made.Quantitative Calibration StandardASTM-D3710ASTM-D3710-PAKVol./Vol. %n-Butylbenzene 3.5n-Decane 3.52,4-Dimethylpentane 5.8n-Dodecane 3.5n-Heptane 10.5n-Hexane 5.82-Methylbutane 10.52-Methylpentane 5.8Vol./Vol. %$ 25 / 1 x 1 mLSAVE 36% $ 80 / 5 x 1 mL16 comps.n-Octane 5.8n-Pentadecane 2.3n-Pentane 8.1n-Propylbenzene 4.7n-Tetradecane 2.3Toluene 11.6n-Tridecane 2.3p-Xylene 14.0ASTM D-2887-99 Boiling Range Distribution of Petroleum Fractions by GCCalibration Solution *NEWDRH-002S-R1$ 50 / 1 x 1 mLDRH-002S-R1-PAK SAVE 20% $ 200 / 5 x 1 mLAt stated conc. in Chloroform17 comps.µg/mLµg/mLµg/mLµg/mLn-Hexane 600 n-Undecane 1200 n-Octadecane 500 n-Dotriacontane 100n-Heptane 600 n-Dodecane 1200 n-Eicosane 200 n-Hexatriacontane 100n-Octane 800 n-Tetradecane 1200 n-Tetracosane 200 n-Tetracontane 100n-Nonane 800 n-Hexadecane 1000 n-Octacosane 100 n-Tetratetracontane100n-Decane 1200* Can be shipped by Air and SeaOriginally designed forD-3710-95Standards of InterestsSee page 3 for AccuStandard’snew D-86 QA/QC Standards.ASTM D-3798Analysis of p-Xylene by GCAccuStandard’s R & D team has developed a special highly purified p-Xylene designed for ASTM MethodD-3798 specifications. The incorporation of this p-Xylene into the formulation allows the analytical chemistto qualitatively and quantitatively measure the impurities in the p-Xylene feedstock streams.p-Xylene Impurity Standardwith ISTDD-3798-IS$ 30 / 1 x 1 mLD-3798-IS-PAK SAVE 33% $ 100 / 5 x 1 mLAt stated conc. by weight11 comps.Wt./Wt. %n-Pentane 0.15n-Octane 0.15Benzene 0.15Toluene 0.15Ethylbenzene 0.15p-Xylene 98.65m-Xylene 0.15Wt./Wt. %o-Xylene 0.15Cumene 0.15Propylbenzene 0.15Total Analytes 100plus n-Undecane* (ISTD) 0.500gramsp-Xylene Impurity Standardwithout ISTDD-3798-10ML$ 65 / 1 x 10 mLD-3798-10ML-PAK SAVE 20% $ 260 / 5 x 10 mLAt stated conc. by weight10 comps.Wt./Wt. %n-Pentane 0.15n-Octane 0.15Benzene 0.15Toluene 0.15Ethylbenzene 0.15Wt./Wt. %p-Xylene 98.65m-Xylene 0.15o-Xylene 0.15Cumene 0.15Propylbenzene 0.15Technical NoteBulk Packaged p-Xylenewithout Internal StandardOther suggested internalstandards can be used inconjunction with the bulkpackaged D-3789 1 x 10 mLampule to meet your company’sapplication. If you prefer toeliminate making standards,contact AccuStandard’sTechnical Department with yourunique formulation for a customquotation. The customquotation request form islocated in the back of thiscatalog.ASTM D-3831Manganese in Gasoline by AA SpectroscopyManganese Stock SolutionD-3831 $ 65 / 1 x 100 mLOriginally designed forD-3831-98Manganese @ 1.0 g Mn / gal (264.2 mg Mn / L) in Methyl isobutyl ketone20 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 4059429142944377MemberASTM D-4059Polychlorinated Biphenyls in Insulating Liquids by GCAroclors in PCB-Free Transformer Oil (At 2 concentrations in Transcrest W130)Aroclor #Conc.(ppm w/w)Cat. No.1 x 1 mLPricePAK Cat. No.5 x 1 mLPriceAroclor 1016 50 C-216-ST-1 $ 25 C-216-ST-1-PAK $ 90Aroclor 1016 500 C-216-ST-2 30 C-216-ST-2-PAK 120Aroclor 1221 50 C-221-ST-1 25 C-221-ST-1-PAK 90Aroclor 1221 500 C-221-ST-2 30 C-221-ST-2-PAK 120Aroclor 1232 50 C-232-ST-1 25 C-232-ST-1-PAK 90Aroclor 1232 500 C-232-ST-2 30 C-232-ST-2-PAK 120Aroclor 1242 50 C-242-ST-1 25 C-242-ST-1-PAK 90Aroclor 1242 500 C-242-ST-2 30 C-242-ST-2-PAK 120Aroclor 1248 50 C-248-ST-1 25 C-248-ST-1-PAK 90Aroclor 1248 500 C-248-ST-2 30 C-248-ST-2-PAK 120Aroclor 1254 50 C-254-ST-1 25 C-254-ST-1-PAK 90Aroclor 1254 500 C-254-ST-2 30 C-254-ST-2-PAK 120Aroclor 1260 50 C-260-ST-1 25 C-260-ST-1-PAK 90Aroclor 1260 500 C-260-ST-2 30 C-260-ST-2-PAK 120Aroclor 1262 50 C-262-ST-1 25 C-262-ST-1-PAK 90Aroclor 1262 500 C-262-ST-2 30 C-262-ST-2-PAK 120Aroclor 1268 50 C-268-ST-1 25 C-268-ST-1-PAK 90Aroclor 1268 500 C-268-ST-2 30 C-268-ST-2-PAK 120Originally designed forD-4059-96Additional Aroclors andPCB Congener Standardsavailable in our OrganicCatalogASTMNeat Individual AroclorsZ-008Aroclor # Cat. No. Price / Unit (Kit)Aroclor 1016 C-216N $ 25 / 100 mg 100 mgAroclor 1221 C-221N 25 / 100 mg 100 mgAroclor 1232 C-232N 25 / 10 mg 10 mgAroclor 1242 C-242N 25 / 100 mg 100 mgAroclor 1248 C-248N 25 / 10 mg 10 mgAroclor 1254 C-254N 25 / 100 mg 100 mgAroclor 1260 C-260N 25 / 100 mg 10 mgAroclor 1262 C-262N 25 / 100 mg 10 mgAroclor 1268 C-268N 25 / 10 mg 10 mgKit of above 9 Aroclors Z-008 $ 125 / 9 vialsAroclor-free transformer oilalso available as:T-W130$ 5 / 1 x 1 mLASTM D-4291 (Reapproved 1998)Trace Ethylene Glycol in Used Engine OilEthylene Glycol Stock StandardD-4291-93$ 20 / 1 x 1 mLD-4291-93-PAKSAVE 20% $ 80 / 5 x 1 mLOriginally designed forD-4291-93Ethylene glycol @ 2000 µg/mL in waterASTM D-4294Sulfur in Petroleum Products by ED-XRF SpectroscopySee page 8-11 for AccuStandard’s comprehensive line of Certified Sulfur Calibration Standardsdesigned for matrix specific applications as described in Method D-4294 in section 9.0(Calibration & Standardization).D-4294MeetsEPA Guidelinesfor RFGAnalysisASTM D-4377Water in Crude oils by Potentiometric Karl Fischer TitrationSee page 5 for AccuStandard’s comprehensive line of Certified Karl Fischer Water Standards.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 21


ASTM StandardsMethod 4629MemberASTM D-4629Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet OxidativeCombustion and Chemiluminescence Detection. IP Designation 379/88Originally designed forD-4629-96Method D-4629 is used to determine trace total nitrogen naturally found in liquid hydrocarbons boiling from50 to 400°C with viscosities between 0.2 and 10 cSt. This method monitors feed stocks for nitrogen toprevent the poisoning of some process catalysts when trace nitrogenous materials are present.Nitrogen Calibration Set-Low Boiling SolventsTechnical NoteD-4629-91-LB-CAL-SET$ 75 / set of 7 x 1 mLSet includes the following Cat. No.sNitrogen introduced using PyridineCat. No. Description Price / UnitD-4629-91-LB-0.3X Nitrogen @ 0.3 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-1X Nitrogen @ 1 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-10X Nitrogen @ 10 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-25X Nitrogen @ 25 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-50X Nitrogen @ 50 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-75X Nitrogen @ 75 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-100X Nitrogen @ 100 µg/mL in Isooctane $ 20 / 1 x 1 mLASTMStock Nitrogen Solution for Low Boiling SolventsD-4629-91-LB-COND-4629-91-LB-CON-PAKNitrogen @ 1000 µg/mL in Isooctane(Pyridine @ 5.65 mg/mL in Isooctane)$ 20 / 1 x 1 mL$ 80 / 5 x 1 mLNitrogen Calibration Set-High Boiling SolventsTechnical NoteD-4629-91-HB-CAL-SET$ 75 / set of 7 x 1 mLSet includes the following Cat. No.sNitrogen introduced using CarbazoleCat. No. Description Price / UnitD-4629-91-HB-0.3X Nitrogen @ 0.3 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-1X Nitrogen @ 1 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-10X Nitrogen @ 10 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-25X Nitrogen @ 25 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-50X Nitrogen @ 50 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-75X Nitrogen @ 75 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-100X Nitrogen @ 100 µg/mL in Toluene $ 20 / 1 x 1 mLStock Nitrogen Solution for High Boiling SolventsD-4629-91-HB-COND-4629-91-HB-CON-PAK$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mLNitrogen @ 1000 µg/mL in Toluene : Acetone (9:1)(Carbazole @ 11.95 mg/mL in Toluene : Acetone (9:1) )Low level Nitrogen Calibration SetASTM-P-0070-SET$ 75 / 6 x 1 mLSet includes the following Cat. No.sTechnical NoteNitrogen introduced using AnilineCat. No. Description UnitASTM-P-0070-BL Isooctane Blank 1 x 1 mLASTM-P-0070-1X Nitrogen @ 0.5 µg/g in Isooctane 1 x 1 mLASTM-P-0070-2X Nitrogen @ 1.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-4X Nitrogen @ 2.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-10X Nitrogen @ 5.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-20X Nitrogen @ 10.0 µg/g in Isooctane 1 x 1 mLLow level Nitrogen &Sulfur Calibration SetASTM-P-0071-SET$ 50 / 4 x 1 mLSet includes the following Cat. No.sTechnical NoteThe Nitrogen is introduced using Aniline and theSulfur is introduced using di-n-Butyl sulfideCat. No. Description UnitASTM-P-0071-BL Benzene Blank 1 x 1 mLASTM-P-0071-01 Nitrogen @ 0.25 µg/g & Sulfur @ 0.25 µg/g in Benzene 1 x 1 mLASTM-P-0071-02 Nitrogen @ 0.50 µg/g & Sulfur @ 0.50 µg/g in Benzene 1 x 1 mLASTM-P-0071-03 Nitrogen @ 1.00 µg/g & Sulfur @ 1.00 µg/g in Benzene 1 x 1 mLFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 23


Method 4815,ASTM StandardsMemberASTMASTM D-4815MtBE, EtBE, TAME, DIPE, Tertiary-amyl Alcohol andC 1 to C 4 Alcohols in Gasoline by GCOxygenate Quantitative Calibration Mixtures (without Internal Standard)D-4815-SET-10ML$ 300 / set of 5 x 10 mL of 5 component mixStd. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Wt. % Wt. % Wt. % Wt. % Wt. %Ethanol 3.00 0.10 6.00 9.00 12.00t-Butanol 0.10 3.00 6.00 8.00 12.00Methyl t-butyl ether (MtBE) 20.0 15.00 10.00 5.00 0.10t-Pentanol 1.25 5.00 2.50 3.75 0.10Isooctane/xylene (65:35) 75.65 76.90 75.50 74.25 75.80Oxygenate Quantitative Calibration Mixtures (with Internal Standard)D-4815/IS-SET of 6 component mix $ 125 / set of 5 x 1 mLD-4815/IS-SET-PAK$ 500 / set of 5 x (5 x 1 mL)Originally designed forD-4815-99Calibration Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Range Wt. % Wt. % Wt. % Wt. % Wt. %Ethanol 0.1 - 11.40 2.85 0.10 5.70 8.55 11.40t-Butanol 0.1 - 11.40 0.10 2.85 5.70 7.60 11.40Methyl t-butyl ether (MtBE) 0.1 - 19.0 19.00 14.25 9.50 4.75 0.10t-Pentanol 0.1 - 4.79 1.19 4.75 2.38 3.56 0.101,2-Dimethoxyethane (DME) (Internal Std.) 5.00 5.00 5.00 5.00 5.00Isooctane/xylene (65:35) 71.87 73.06 71.73 70.54 72.0Total Oxgenates & Internal Standard 28.14 26.95 28.28 29.46 28.00D-4815MeetsEPA Guidelinesfor RFGAnalysisTechnical NoteAdditional Oxygenatecalibration, check standards,and independent referencestandards can be found inASTM method D-5599 (pages34-36) or D-5622-94 (page 37)The required QA/QC proceduresin EPA methods stipulate acalibration check standard beused once per analytical batchor per 10 sample set.AccuStandard has bulkpackaged our check standardsto meet this increased usage.Quantitative Peak ID andRetention Time MixtureD-4815-RTD-4815-RT-PAK$ 25 / 1 x 1 mLSAVE 20% $ 100 / 5 x 1 mLCompound Wt. %Methylcyclopentane 4.00Methanol 7.30Ethanol 7.30Isopropanol 7.30tert-Butanol 7.30n-Propanol 7.30Methyl tert-butyl ether (MtBE) 4.00sec-Butanol 7.30Diisopropyl ether (DIPE) 4.00Isobutanol 7.30Ethyl tert-butyl ether (EtBE) 4.00tert-Pentanol 7.301,2-Dimethoxyethane (ISTD) 6.00n-Butanol 7.30Benzene 5.00tert-Amyl methyl ether 7.3016 comp. core mix100Valve Timing MixtureD-4815-VT$ 25 / 1 x 1 mLD-4815-VT-PAK SAVE 20% $ 100 / 5 x 1 mL5 comps.Compound Wt. %Methylcyclopentane 10.00Diisopropyl ether (DIPE) 10.00Ethyl tert-butyl ether (EtBE) 10.00Methyl tert-butyl ether (MtBE) 10.00n-Hexane 60.00Oxygenate Internal Standard MixtureM-GRO-IS-5MLM-GRO-IS-5ML-PAKOxygenate Free Refinery GasolineBlankM-GRO-BLNK-10ML$ 10 / 1 x 10 mLM-GRO-BLNK-10ML-PAKSAVE 20% $ 40 / 5 x 10 mLRFA Gasoline (neat)$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mL1,2-Dimethoxyethane (ISTD) (neat)Test toLow ppbSulfurSee Pages 6-11Custom FormulationsAccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a custom formulation.Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. To make an inquiry for CustomQuotes visit our website.You can also Email your requirements to techservice@accustandard.com or Fax us at 203-786-5287. Please include the following information:List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (milliliters per ampule, bottle, or vial).Quality Control Options1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (where available). Everycomponent in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. The solutions are made up to volumeusing class A glassware. A certificate comes with each standard and documents the gravimetric values used.2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plus statisticalanalysis. A data package is provided containing analytical and gravimetric data (Organic customs only).Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.24 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 492749284929MemberASTM D-4927 Elemental Analysis of Lubricant and Additive Components -Barium, Calcium,Phosphorus, Sulfur, and Zinc by WD-XRF SpectroscopyLubricating Oil, Elements (Nominal Value) Wt.% listed belowASTM-P-0110-SET$ 2300 / 17 x 100 mLBa Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000ASTM D-4928Originally designed forD-4927-96Water in Crude Oils by Potentiometric Karl Fischer TitrationSee page 5 for AccuStandard’s new line of Karl Fischer Water Standards.Standards of InterestsSee Table of Contents for theWear Metals Group pagesASTMWEAR METALSASTM D-4929Organic Chloride Content in Crude Oil - Test Method BCombustion and MicrocoulometryWorking Level Chlorine StandardD-4929-94D-4929-94-PAKChlorine @ 10 µg/mL in Isooctane$ 10 / 1 x 5 mLSAVE 20% $ 40 / 5 x 5 mLStock Chlorine StandardD-4929-94-100XD-4929-94-100X-PAK$ 15 / 1 x 5 mLSAVE 20% $ 60 / 5 x 5 mLChlorine @ 1000 µg/mL in IsooctaneOriginally designed forD-4929-99Standards of InterestsSee page 66 for additionalproposed and promulgatedChlorine in Lube Oil standardsCustom Ampulling for Bulk Quantity RequirementsAutomated ampule filling & sealing 0.2 mL up to 20 mLQuantities from 500 to over 500,000 ampulesHomogeneity testingAmber ampules for added product stabilityPrivate labeling and packagingWe can reduce your costs using the CozzoliAuto Filling/ Sealing Machine to package justthe right size product for your application.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 25


Method 49515056,ASTM StandardsMemberASTMWEAR METALSASTM D-4951Additive Elements in Lubricating Oils byInductively Coupled Plasma Atomic Emission Spectrometry20 Wear Metal Multi-Element Standardcontaining no metallic sulfonatesConc. Cat. No. Price(µg/g)10 WM-20-NMS-1X-1 $ 15030 WM-20-NMS-3X-1 15050 WM-20-NMS-5X-1 150100 WM-20-NMS-10X-1 170300 WM-20-NMS-30X-1 230500 WM-20-NMS-50X-1 350900 WM-20-NMS-90X-1 500WM-20-NMS-SET-1 $ 1450set of above 7 x 100 mLRecommended Internal Standard (IS)Each Wear Metal Standard contains the belowlist of 20 elements in hydrocarbon oil at thestated concentrationAl (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)Sulfur free Organometallic (IS) Sulfur free Organometallic (IS)Element @ 1000 µg/g Price @ 5000 µg/g PriceCat. No. 50 mL Cat. No. 50 mLCobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)Originally designed forD-4951-96Standards of InterestsSee Table of Contents for theWear Metals Group pages.Technical NotesThis calibration curve has beenformulated with startingmaterials containing no metalsulfonates. This way a sulfurcalibration curve can easily bedeveloped using a highconcentration sulfur standard.ASTM D-5056Trace Metals in Petroleum Coke by Atomic AbsorptionOriginally designed forD-5056-96Element @ 1000 µg/mL Unit Cat. No. PriceMatrix* Aluminum 100 mL AA01N-1 $ 13HNO 3 500 mL AA01N-5 33* Calcium 100 mL AA09N-1 12HNO 3 500 mL AA09N-5 30* Iron 100 mL AA27N-1 12HNO 3 500 mL AA27N-5 30Nickel 100 mL AA37N-1 12HNO 3 500 mL AA37N-5 30Element @ 1000 µg/mL Unit Cat. No. PriceMatrixSilicon 100 mL AA52W-1 $ 13H 2 O tr. NaOH 500 mL AA52W-5 33* Sodium 100 mL AA54N-1 13HNO 3 500 mL AA54N-5 33Vanadium 100 mL AA67N-1 13HNO 3 500 mL AA67N-5 33* For your convenience these elements are availablein HCl. To order, change the N to H at the end ofthe catalog numbers.Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted byASTM Method see beginning of Catalog26 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 50595134MemberASTM D-5059 Lead in Gasoline by X-Ray Spectroscopy IP Designation 228/79Originally designed forD-5059-98Technical NotesAccuStandard has formulated the following standards to measure the lead content in gasoline for bothhigh and low concentrations using bismuth as an internal standard. For long term stability and ease ofuse AccuStandard provides the internal standard in two convenient packaging sizes. The bulk 4 oz.bottles are designed for laboratories analyzing many samples while the 10 mL ampules are forlaboratories that have limited requests for the test method. Should you require bulk quantities of theinternal standard conveniently packaged in single-use ampules, contact AccuStandard’s technicaldepartment for a quotation. Bulk volumes of 250 mL or more can be sealed into ampules (your choiceup to 20 mL size). Use of our ampulling services can provide substantial saving for the Laboratory.D-5059MeetsEPA Guidelinesfor RFGAnalysisASTMPart A - Lead in Gasoline StandardsD-5059-A-CAL-SET$ 450 / set of 7 x 4 ozThe Set contains the following 7 solutions in isooctaneCat. No. Lead Concentration Price /g Pb/US gal g Pb/ UK gal mg Pb/mL UnitD-5059-A-01 0.0000 0.000 0.000 $ 10 / 4 ozD-5059-A-02 0.1000 0.120 0.026 80 / 4 ozD-5059-A-03 1.0000 1.200 0.264 80 / 4 ozD-5059-A-04 2.0000 2.400 0.528 80 / 4 ozD-5059-A-05 3.0000 3.600 0.793 80 / 4 ozD-5059-A-06 4.0000 4.800 1.057 80 / 4 ozD-5059-A-07 5.0000 6.000 1.321 80 / 4 ozPart C - Lead in Gasoline StandardsD-5059-C-CAL-SET$ 450 / set of 7 x 4 ozThe Set contains the following 7 solutions in isooctaneInternal StandardD-5059-IS-4$ 80 / 1 x 4 oz bottleD-5059-IS-10ML-PAK $ 60 / 5 x 10 mL ampsBismuth @ 0.793 mg/mL (3.00 g/US gal)(3.60 g/UK gal) in Mineral oilTechnical NotesAll D-5059 Certificates have theconcentrations for the Standard listedin three convenient LeadConcentration units.Cat. No. Lead Concentration Price /g Pb/US gal g Pb/ UK gal µg Pb/mL UnitD-5059-C-01 0.0000 0.000 0.000 $ 10 / 4 ozD-5059-C-02 0.0010 0.001 0.264 80 / 4 ozD-5059-C-03 0.0050 0.006 1.321 80 / 4 ozD-5059-C-04 0.0100 0.012 2.642 80 / 4 ozD-5059-C-05 0.0500 0.060 13.209 80 / 4 ozD-5059-C-06 0.1000 0.120 26.417 80 / 4 ozD-5059-C-07 0.3000 0.360 79.252 80 / 4 ozASTM D-5134Petroleum Naphthas through n-Nonane by Capillary GCQualitative Reference Petroleum SetD-5134-92-SET$ 75 / 3 x 1 mLOriginally designed forD-5134-98Cat. No. Description Unit PriceD-5134-92-ALK Qualitative Reference Alkylate Standard neat fraction 1 x 1 mL $ 30approx. 30 components identifiedD-5134-92-NAP Qualitative Reference Naphtha Standard neat fraction 1 x 1 mL 30approx. 70 components identifiedD-5134-92-REF Qualitative Reference Reformate Standard neat fraction 1 x 1 mL 30approx. 100 components identifiedStandards of InterestsSee page 14 for additionalDetailed Hydrocarbon Analysis(DHA) blends.Column Evaluation MixD-5134-92-CEMWt. / Wt. %Toluene 0.5n-Heptane 1.02,3,3-Trimethylpentane 1.02-Methylheptane 1.0$ 35 / 1 x 1 mL7 comps.Wt. / Wt. %4-Methylheptane 1.0n-Octane 1.02-Methylpentane 94.5Linearity Check MixD-5134-92-LCM$ / 1 x 1 mL10% w/w each component 10 comps.Benzene2,4-Dimethylheptane2,4-Dimethylhexanen-Heptanen-Hexane2-Methylheptane2-Methylhexanen-Nonanen-OctaneTolueneFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 27


Method 51845185, 5186ASTM StandardsMemberASTM D-5184(Reapproved 1995)Aluminum and Silicon in Fuel Oils byAshing, Fusion, ICP-AES Spectrometry & AA SpectrometryOriginally designed forD-5184-91ASTMTartaric Acid / Hydrochloric AcidSolutionD-5184-91-TA-5Tartaric acid @ 0.5% w/v in 4% HCl$ 20 / 1 x 500 mLAluminum Standard SolutionD-5184-91-AL-1$ 34 / 1 x 100 mLD-5184-91-AL-5$ 67 / 1 x 500 mLAl @ 1000 µg/mL in 5 % HClSilicon Standard SolutionD-5184-91-SI-1$ 34 / 1 x 100 mLD-5184-91-SI-5$ 67 / 1 x 500 mLSilicon @ 1000 µg/mL in trace NaOHTechnical NoteContact the our Technical department for Ready-to-Aspirate working level calibration curves designed foryour laboratories' specific calibration ranges.WEAR METALSASTM D-5185Additive Elements, Wear Metals, & Contaminants in Used Lubricating Oils by ICP-AES21 Wear Metal Multi-Element StandardContaining No Metallic SulfonatesConc. Cat. No. Price(µg/g)10 WM-21-NMS-1X-1 $ 16030 WM-21-NMS-3X-1 16050 WM-21-NMS-5X-1 160100 WM-21-NMS-10X-1 180300 WM-21-NMS-30X-1 240500 WM-21-NMS-50X-1 350WM-21-NMS-SET-1 $ 1050set of above 6 x 100 mLRecommended Internal Standard (IS)Each Wear Metal Standard containsthe below list of 21 elements inhydrocarbon oil at the statedconcentrationAg (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)Sulfur free Organometallic (IS) Sulfur free Organometallic (IS)Element @ 1000 µg/g Price @ 5000 µg/g PriceCat. No. 50 mL Cat. No. 50 mLCobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)Originally designed forD-5185-97Standards of InterestsSee Table of Contents for theWear Metals Group pagesTechnical NotesThis calibration curve has beenformulated with startingmaterials containing no metalsulfonates. So a sulfurcalibration curve can easily bedeveloped using a highconcentration sulfur standard.ASTM D-5186Aromatic Content & Polynuclear Aromatic Content ofDiesel Fuels & Aviation Turbine Fuels by SFCOriginally designed forD-5186-99Performance SolutionD-5186-96-PMD-5186-96-PM-PAKWt. / Wt. %n-Hexadecane 75Naphthalene 2.0$ 25 / 1 x 1 mLSAVE 20% $ 100 / 5 x 1 mL4 comps.Wt. / Wt. %Tetralin 3.0Toluene 20Detector Linearity Check Solution SetD-5186-96-DLC-SET$ 30 / 2 x 1 mLSet includes the below two Cat. No.'sD-5186-96-DLC-25X 25% w/w #2 Diesel Fuel in n-HexadecaneD-5186-96-DLC-50X 50% w/w #2 Diesel Fuel in n-HexadecaneISO 9001:2000Certificate Number: 3169228 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 51885191 &54825307MemberASTM D-5188Vapor - Liquid Ratio Temperature StandardsPerformance Check Samples for daily monitoring of instrument performanceCat. No. V/L Temp Price / SetASTM-P-125-01-VAP 36.1˚C (96.9˚F) $ 45 / 5 x 20 mLASTM-P-125-02-VAP 68.0˚C (155.7˚F) 45 / 5 x 20 mLOriginally designed forD-5188-99ASTMASTM D-5191 & D-5482Vapor Pressure StandardsVapor Pressure Quality Control SamplesCat. No. Vapor Pressure Price / SetASTM-P-124-01-VAP 68.3kPa (9.91 psi) $ 65 / 10 x 10 mLASTM-P-124-02-VAP 68.0kPa (9.86 psi) 75 / 10 x 10 mLASTM-P-124-03-VAP 51.1kPa (7.41 psi) 70 / 10 x 10 mLASTM-P-124-04-VAP 46.7kPa (6.77 psi) 115 / 10 x 10 mLASTM-P-124-05-VAP 22.5kPa (3.26 psi) 50 / 10 x 10 mLASTM-P-124-06-VAP 7.1kPa (1.03 psi) 50 / 10 x 10 mLOriginally designed forD-5191-99 & D-5482-99Technical NoteConsists of puresolvents withknown vaporpressureValue Added Paks (Cat. No.’sending in -VAP) provide multiplesingle units packaged togetherfor both greater stability andcost savings.ASTM D-5307-97Boiling Range Distribution of Crude Petroleum by GCQuantitative Paraffins StandardD-5307-QUANTD-5307-QUANT-PAKEqual Wt. %n-Decanen-Undecanen-Dodecanen-Tridecanen-Tetradecanen-Pentadecanen-Hexadecanen-Heptadecane$ 60 / 1 x 2 mLSAVE 20% $ 240 / 5 x 2 mL16 comps.n-Octadecanen-Eicosanen-Tetracosanen-Octacosanen-Dotriacontanen-Hexatriacontanen-Tetracontanen-TetratetracontaneQualitative Paraffins StandardD-5307-QUALD-5307-QUAL-PAKAt stated approx. Wt. %Wt./Wt. %Propane 10Butane 15n-Pentane 15n-Hexane 15$ 40 / 1 x 1 mLSAVE 20% $ 160 / 5 x 1 mL7 comps.Wt./Wt. %n-Heptane 15n-Octane 15n-Nonane 15Column Resolution MixtureD-5307-CRD-5307-CR-PAKAt stated approx. Wt. %Wt./Wt. %n-Hexadecane 1.0n-Octadecane 1.0$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mL3 comps.Wt./Wt. %n-Octane 98.0Internal StandardD-5307-IS-10MLD-5307-IS-10ML-PAKWt./Wt. %n-Tetradecane 25n-Pentadecane 25$ 30 / 1 x 10 mLSAVE 20% $ 120 / 5 x 10 mL4 comps.Wt./Wt. %n-Hexadecane 25n-Heptadecane 25MemberAccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 29


Method 5441ASTM StandardsMemberASTM D-5441Analysis of Methyl tert-butyl ether (MtBE) by GCOriginally designed forD-5441-98ASTMThe ASTM Committee D-02 on Petroleum Products and Lubricants has issued the Standard MethodD-5441-98 for the determination of the purity of methyl tert-butyl ether (MtBE) by Gas Chromatography.This method provides a procedure to measure impurities in MtBE such as C 4 to C 12 olefins, methyl,isopropyl and tert-butyl alcohols, methyl sec-butyl & methyl tert-amyl ethers, acetone, and methyl ethylketones. The presence of these impurities in MtBE can have a direct effect upon the value of the MtBE asa gasoline additive. AccuStandard has formulated the following reference standards to meet the methodspecifications. Different packaging sizes are available to meet various sample testing capacities .MtBE Contaminant StandardLow ConcentrationD-5441 $ 30 / 1 x 1 mLD-5441-PAKSAVE 20% $ 120 / 5 x 1 mLD-5441-5ML$ 100 / 1 x 5 mLD-5441-5ML-PAK SAVE 20% $ 400 / 5 x 5 mLEach comp. at 0.1% Wt./Wt. in MtBE 12 comps.tert-Amyl methyl ethertert-Butanoltert-Butyl ethyl ether4,4-Dimethyl-2-neopentyl-1-penteneMethanol2-Methylbutane2-Methyl-2-butene2,2',4,6,6'-Pentamethyl-3-heptenePentanecis-2-Pentenetrans-2-Pentene2,4,4-Trimethyl-1-penteneQualitative StandardD-5441-QUAL$ 145 / 1 x 1 mL0.1% Wt./Wt. in n-Dodecane 33 comps.MethanolIsobutylenen-Butanetrans-2-butenecis-2-butene3-Methyl-1-buteneAcetoneIsopentane2-Propanol1-Pentene2-Methyl-1-butenen-Pentanetrans-2-Pentenet-Butanolcis-2-Pentene2-Methyl-2-buteneCyclopenteneMtBE2,3-Dimethyl-1-butene4-Methyl-cis-2-pentene2-MethylpentaneMethylethyl ketone3-Methylpentanesec-Butyl methyl etherETBETAME3,5-Dimethyl-1-hexene2,4,4-Trimethyl-1-pentene2,4,4-Trimethyl-2-pentene3,4,4-Trimethyl-trans-2-pentene2,3,4-Trimethyl-2-pentene4,4-Dimethyl-2-neopentyl-1-pentene2,2’,4,6,6’-Pentamethyl-3-hepteneMtBE Resolution Test MixtureD-5441-RES$ 20 / 1 x 1 mLD-5441-RES-PAK SAVE 20% $ 80 / 5 x 1 mLD-5441-RES-5ML$ 60 / 1 x 5 mLD-5441-RES-5ML-PAK SAVE 20% $ 240 / 5 x 5 mLEach comp. at 1% Wt./Wt. in MtBE 3 comps.MtBE Contaminant StandardHigh ConcentrationD-5441-10X$ 30 / 1 x 1 mLD-5441-10X-PAK SAVE 20% $ 120 / 5 x 1 mLD-5441-10X-5ML$ 100 / 1 x 5 mLD-5441-10X-5ML-PAK SAVE 20% $ 400 / 5 x 5 mLEach comp.at 1% Wt./Wt. in MtBE 12 comps.tert-Amyl methyl ethertert-Butanoltert-Butyl ethyl ether4,4-Dimethyl-2-neopentyl-1-penteneMethanol2-Methylbutane2-Methyl-2-butene2,2',4,6,6'-Pentamethyl-3-heptenePentanecis-2-Pentenetrans-2-Pentene2,4,4-Trimethyl-1-penteneQuantitative StandardD-5441-QUANT$ 130 / 1 x 1 mL0.1% Wt./Wt. in n-Dodecane 29 comps.Methanol2-Methylpentane3-Methyl-1-butene Methyl ethyl ketoneAcetone3-MethylpentaneIsopentane sec-Butyl methyl ether2-Propanol Ethyl tert-butyl ether1-PenteneTAME2-Methyl-1-butene 3,5-Dimethyl-1-hexenen-Pentane2,4,4-Trimethyl-1-pentenetrans-2-Pentene 2,4,4-Trimethyl-2-pentenet-Butanol3,4,4-Trimethyl-trans-2-pentenecis-2-Pentene 2,3,4-Trimethyl-2-pentene2-Methyl-2-butene 4,4-Dimethyl-2-neopentyl-1-penteneCyclopentene 2,2’,4,6,6’-Pentamethyl-3-hepteneMtBE2,3-Dimethyl-1-butene4-Methyl-cis-2-penteneFor our complete line ofOrganic Standards andInorganic Standards, requesta copy of the Catalog(s).trans-2-Pentenetert-Butanolcis-Pentene30 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 544254435453MemberASTM D-5442 (Reapproved 1998)Quantitative Wax StandardD-5442-PAKAt stated Wt. % in CyclohexaneWt./Wt. %n-Dodecane 0.02n-Tetradecane 0.03n-Hexadecane 0.04n-Octadecane 0.05n-Eicosane 0.06n-Docosane 0.08Retention Time Standard Mix 1D-5442-RT1Equal parts by weightn-Hexadecane (c16)n-Octadecane (c18)n-Eicosane (c20)n-Docosane(c22)n-Tetracosane (c24)n-Hexacosane (c26)Wt./Wt. %n-Tetracosane 0.10n-Hexacosane 0.12n-Octacosane 0.12n-Triacontane 0.10n-Dotriacontane 0.08$ 50 / 500 mg12 comps.n-Octacosane (c28)n-Triacontane (c30)n-Dotriacontane (c32)n-Hexatriacontane (c36)n-Tetracontane (c40)n-Tetratetracontane (c44)Analysis of Petroleum Waxes by GC$ 95 / 5 x 1 mL16 comps.Wt./Wt. %n-Hexatriacontane 0.06n-Tetracontane 0.05n-Tetratetracontane 0.04n-Pentacontane 0.03n-Hexacontane 0.02NEWRetention Time Standard Mix 2D-5442-RT2Equal parts by weightn-Dodecane (c12)n-Tetradecane (c14)n-Hexadecane (c16)n-Octadecane (c18)n-Eicosane (c20)n-Docosane (c22)n-Tetracosane (c24)n-Hexacosane (c26)Column ResolutionStandardD-5442-CR-PAK $ 40 / 5 x 1 mLAt stated Wt. % in Cyclohexane2 comps.Wt./Wt. %n-Eicosane 0.05n-Tetracontane 0.05NEW$ 55 / 500 mg16 comps.n-Octacosane (c28)n-Triacontane (c30)n-Dotriacontane (c32)n-Hexatriacontane (c36)n-Tetracontane (c40)n-Tetratetracontane (c44)n-Pentacontane (c50)n-Hexacontane (c60)Originally designed forD-5442-93Standards of InterestsSee ASTM Methods D-3710,D-5307, D-6352 for additionalcalibration standards forhydrocarbon analysis or page 15for new proposed methods.ASTMASTM D-5443(Reapproved 1998)Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis inPetroleum Distillates through 200°C by Multi-dimensional GCOriginally designed forD-5443-93Hydrocarbon Test MixtureD-5443-93-HTMAt stated Wt. %Wt./Wt. %Cyclopentane 1.00n-Pentane 1.00Cyclohexane 2.002,3-Dimethylbutane 2.00n-Hexane 2.00n-Hexene 1.50Methylcyclohexane 4.254-Methyl-1-hexene 1.50n-Heptane 3.50Wt./Wt. %1cis,2-Dimethylcyclohexane 5.00Isooctane 5.00n-Octane 5.001cis,2 cis,4-Trimethylcyclohexane 4.25n-Nonane 4.50n-Decane 4.25n-Undecane 3.50n-Dodecane 3.25Benzene 2.25Toluene 2.25$ 100 / 1 x 1 mL28 comps.Wt./Wt. %trans-Decahydronaphthelene 4.25n-Tetradecane 4.50Ethylbenzene 4.50o-Xylene 4.25n-Propylbenzene 5.001,2,4-Trimethylbenzene 4.501,2,3-Trimethylbenzene 5.001,2,4,5-Tetramethylbenzene 5.00Pentamethylbenzene 5.00Standards of InterestsSee pages 6-11 for acomprehensive line of CertifiedSulfur Calibration Standards,Petrocheck, & Petrotest qualitycontrol products, pages 1-2.ASTM D-5453Low Level Sulfur SetMid Level Sulfur SetTotal Sulfur in Light Hydrocarbons,Motor Fuels and Oils by Ultraviolet FluorescenceD-5453-LL-SET$ 90 / 5 x 2 mLThe set contains the following 5 standards in IsooctaneCat. No. Description UnitD-5453-LL-BL Sulfur Blank 2 mLD-5453-LL-01 Sulfur @ 0.5 ng/µL 2 mLD-5453-LL-02 Sulfur @ 2.5 ng/µL 2 mLD-5453-LL-03 Sulfur @ 5.0 ng/µL 2 mLD-5453-LL-04 Sulfur @ 10.0 ng/µL 2 mLD-5453-ML-SET$ 90 / 6 x 2 mLThe set contains the following 5 standards in IsooctaneCat. No. Description UnitD-5453-ML-BL Sulfur Blank 2 mLD-5453-ML-01 Sulfur @ 5.0 ng/µL 2 mLD-5453-ML-02 Sulfur @ 25 ng/µL 2 mLD-5453-ML-03 Sulfur @ 50 ng/µL 2 mLD-5453-ML-04 Sulfur @ 100 ng/µL 2 mLD-5453-ML-05 Sulfur @ 200 ng/µL 2 mLReal World Sulfur in VariousGasoline & FuelsQC SamplesSBPT-LSGAS $ 25 / 2 x 15 mLParameter Method Approx .RangeSulfur D-5453-00 0 - 50 µg/gHigh Level Sulfur SetOriginally designed forD-5453-00D-5453-HL-SET$ 90 / 5 x 2 mLThe set contains the following 5 standards in IsooctaneCat. No. Description UnitD-5453-HL-BL Sulfur Blank 2 mLD-5453-HL-01 Sulfur @ 100 ng/µL 2 mLD-5453-HL-02 Sulfur @ 250 ng/µL 2 mLD-5453-HL-03 Sulfur @ 500 ng/µL 2 mLD-5453-HL-04 Sulfur @ 1000 ng/µL 2 mLD-5453MeetsEPA Guidelinesfor RFGAnalysisTechnical NoteDue to the wide variety ofrecommended solvents andstarting materials mentioned inthe preparation of the sulfurstandards, please review thecurrent product offering listedfor certified sulfur standards.Should AccuStandard’s currentsulfur standard line be missingthe necessary standards foryour application, please use ourcustom quotation request formto indicate your requiredformulation. For ppb Sulfurmeasurements, see page 6-11.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 31


Method 5480548255015580MemberASTM StandardsASTM D-5480Engine Oil Volatility by GCOriginally designed forD-5480-95ASTMStock Column Resolution StandardD-5480-CR-PAKEach comp. at 10 µg/mL in CS 2D-5480-CR-100X-PAKEach comp. at 1000 µg/mL in CS 2n-Decanen-Dodecanen-Hexadecane$ 40 / 5 x 1 mL5 comps.$ 50 / 5 x 1 mL5 comps.n-Octadecanen-TetracosaneInternal Standard SolutionD-5480-IS-5ML$ 30 / 1 x 5 mLD-5480-IS-5ML-PAK SAVE 20% $ 120 / 5 x 5 mLEach comp. at equal weights3 comps.n-Decanen-UndecaneTetracosane (Solution A)D-5480-C40-5MLD-5480-C40-5ML-PAK500 µg/mL in CS 2n-Dodecane$ 15 / 1 x 5 mLSAVE 20% $ 60 / 5 x 5 mLStandards of InterestAlternative n-Paraffin standardsare available on page 15 forfurther method developmentwork or more DetailedHydrocarbon Analysis (DHA).n-TetracosaneASTM D-5482 & D-5191Vapor Pressure StandardsVapor Pressure Quality Control SamplesCat. No. Vapor Pressure Price / Set of 10ASTM-P-124-01 68.3kPa (9.91 psi) $ 65 / 10 x 10 mLASTM-P-124-02 68.0kPa (9.86 psi) 75 / 10 x 10 mLASTM-P-124-03 51.1kPa (7.41 psi) 70 / 10 x 10 mLASTM-P-124-04 46.7kPa (6.77 psi) 125 / 10 x 10 mLASTM-P-124-05 22.5kPa (3.26 psi) 50 / 10 x 10 mLASTM-P-124-06 7.1kPa (1.03 psi) 50 / 10 x 10 mLTechnical NoteConsists of puresolvents withknown vaporpressure.Originally designed forD-5482-99 & D-5191-99ASTM D-5501ASTM D-5580Ethanol Content of Denatured Fuel Ethanol by GCDenatured Fuel Ethanol Calibration SetD-5501-94-SET$ 75 / set of 7 x 1 mLCat. No. Comp.1 Wt./ Wt.% Comp.2 Wt./ Wt.% Comp.3 Wt./ Wt.% UnitD-5501-94-01 Ethanol 92 Methanol 0.6 Heptane 7.4 1 x 1 mLD-5501-94-02 Ethanol 93 Methanol 0.5 Heptane 6.5 1 x 1 mLD-5501-94-03 Ethanol 94 Methanol 0.4 Heptane 5.6 1 x 1 mLD-5501-94-04 Ethanol 95 Methanol 0.3 Heptane 4.7 1 x 1 mLD-5501-94-05 Ethanol 96 Methanol 0.2 Heptane 3.8 1 x 1 mLD-5501-94-06 Ethanol 97 Methanol 0.1 Heptane 2.9 1 x 1 mLD-5501-94-07 Ethanol 98 Methanol 0.05 Heptane 1.95 1 x 1 mLBenzene, Toluene, Ethylbenzene, m/p-Xylene, o-Xylene, C 9 andHeavier Aromatics, & Total Aromatics in Finished Gasoline by GCAromatics Quantitative Calibration Mixes (without Internal Standard)D-5580-95-CAL-SET-10ML$ 300 / set of 5 x 10 mL of 6 component mixOriginally designed forD-5501-94Technical NoteAdditional Oxygenate calibration,check standards, andindependent reference standardscan be found in ASTM methodD-4815 (page 24) or D-5622-94(page 37). The required QA/QCprocedures in EPA methodsstipulate a calibration checkstandard be used once peranalytical batch or per 10 sampleset. AccuStandard has bulkpackaged check standards tomeet this increased usage.Originally designed forD-5580-00Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Calibration range Wt. % Wt. % Wt. % Wt. % Wt. %Benzene 0.10 - 5.00 0.10 0.50 1.00 2.00 5.00Toluene 1.00 - 15.00 15.00 10.00 5.00 2.50 1.00Ethylbenzene 0.50 - 10.00 0.50 1.00 2.50 5.00 10.00o-Xylene 0.50 - 10.00 1.00 2.50 10.00 5.00 0.501,2,4-Trimethylbenzene 0.50 - 10.00 1.00 10.00 0.50 5.00 2.50Isooctane 82.40 76.00 81.00 80.50 81.00Aromatics Quantitative Calibration Mixes (with Internal Standard)D-5580-95-CAL-IS-SET$ 100 / set of 5 x 1 mL of 7 component mixAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Calibration range Wt. % Wt. % Wt. % Wt. % Wt. %Benzene 0.09 - 4.50 0.09 0.45 0.90 1.80 4.50Toluene 0.90 - 13.50 13.50 9.00 4.50 2.25 0.90Ethylbenzene 0.45 - 9.00 0.45 0.90 2.25 4.50 9.00o-Xylene 0.45 - 9.00 0.90 2.25 9.00 4.50 0.451,2,4-Trimethylbenzene 0.45 - 9.00 0.90 9.00 0.45 4.50 2.252-Hexanone (Internal Std.) 10.00 10.00 10.00 10.00 10.00Isooctane 74.16 68.40 72.90 72.45 72.9032 Quality System is Certified ASTM to D-5580-00 comply with Continued the International the ISO Next 9001 PageQuality Standard


ASTM StandardsMethod 5580MemberASTM D-5580-00 Benzene, Toluene, Ethylbenzene, m/p-Xylene, o-Xylene, C9 &Continued Heavier Aromatics, and Total Aromatics in Finished Gasoline by GCOriginally designed forD-5580-00Valve Timing Calibration Mix(with Internal Standard)M-GRA-VT/IS-AS$ 25 / 1 x 1 mLM-GRA-VT/IS-AS-PAK SAVE 20% $ 100 / 5 x 1 mLEach at stated conc.6 comps.Wt./Wt. %Benzene 4.5Toluene 4.5Ethylbenzene 9.0o-Xylene 9.02-Hexanone (Internal Std.) 10.0Isooctane 63.0Internal StandardM-GRA-IS-AS-5MLM-GRA-IS-AS-5ML-PAK2-Hexanone (Neat)Wt./Wt. %n-Hexane 12n-Heptane 20n-Octane 15n-Decane 10n-Dodecane 1Isooctane 20Benzene 1$ 10 / 1 x 5 mLSAVE 20% $ 40 / 5 x 5 mLDaily Quality Control Standardwithout Internal StandardD-5580-QC-R1D-5580-QC-R1-PAK$ 125 / 1 x 10 mLSAVE 20% $ 500 / 5 x 10 mL14 comps.Wt./Wt. %Toluene 9Ethylbenzene 2p-Xylene 3o-Xylene 21,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Naphthalene 1Valve Timing Calibration Mix(without Internal Standard)M-GRA-VT-AS-10ML$ 100 / 1 x 10 mLM-GRA-VT-AS-10ML-PAK SAVE 20% $ 400 / 5 x 10 mLEach at stated conc.5 comps.Wt./Wt. %Benzene 5.0Toluene 5.0Ethylbenzene 10.0o-Xylene 10.0Isooctane 70.0Selectivity Check StandardM-GRA-SCS-AS$ 10 / 1 x 1 mLM-GRA-SCS-AS-PAK SAVE 20% $ 40 / 5 x 1 mLEach at stated conc.2 comps.Wt./Wt. %n-Dodecane 1.5Isooctane 98.5Daily Quality Control Standardwithout Internal StandardD-5580-QCD-5580-QC-PAKWt./Wt. %n-Hexane 12n-Heptane 20n-Octane 15n-Decane 10n-Triadecane 1Isooctane 20Benzene 1$ 125 / 1 x 10 mL$ 500 / 5 x 10 mL14 comps.Wt./Wt. %Toluene 9Ethylbenzene 2p-Xylene 3o-Xylene 21,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Naphthalene 1Technical NoteASTM D-5580 GasolineRefinery Quality ControlStandardAccuStandard was requested bythe Petrochemical Industry tomanufacture the following QA/QCstandards for ASTM MethodD-5580. The configuration of yourinstrument valve time switching andthe pre-column incorporateddetermines which QA/QC standardprovides optimum performancewhen analyzing gasolines samplesby Method D-5580. Use of theD-5580 standards in conjunctionwith the real world gasolineAccuPetroTest & AccuPetroCheckConsensus Value ReferenceMaterial (see pages 1-2) canprovide added assurance that theanalytical results being generatedby the laboratory are reproducibleand the analytical system isperforming to method specifications.ASTMExclusive Aromatic Chemical Reference MaterialBenefits from AccuStandardEvery analyte in each solution is individually weighedActual weights and weight percents are available with allASTM/EPA solutionsFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 33


Method 5599ASTMMemberASTM StandardsASTMASTM D-5599Oxygenates in Gas by GC & O-FIDOxygenates Calibration Curve with Internal StandardM-GRO-CAL/IS-SETM-GRO-CAL/IS-SET-PAK$ 250 / set of 8 x 1 mL$ 1,000 / 5 x (8 x 1) mLof 15 Comp. MixEvery analyte in each solutionis individually weighedAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Std. 8Calibration range Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. %Methanol 0.1 - 5.0 --- 0.1 2.5 --- 5 0.5 1 ---Ethanol 1.0 - 12.0 12 --- 3 --- 8 5 1 ---Isopropanol 0.1 - 2.0 2 1 --- 0.1 0.3 --- 0.5 ---t-Butanol 0.1 - 2.0 0.5 0.1 1 --- 2 0.3 --- ---Propanol 0.2 - 2.0 2 --- 0.7 0.2 1 --- 0.4 ---MtBE 1.0 - 17.0 5 17 --- --- 1 2.5 10 ---sec-Butanol 0.1 - 2.5 1 --- 0.5 0.1 --- 2.5 0.7 ---Diisopropyl ether 0.1 - 2.0 --- 0.5 0.3 0.1 2 1 --- ---iso-Butanol 0.1 - 2.0 2 0.5 --- 1 0.1 0.3 --- ---EtBE 1.0 - 18.0 --- 3.5 18 7.5 --- 1 12 ---t-Pentanol 0.1 - 2.0 0.3 1 --- 0.5 0.1 2 --- ---Butanol 0.1 - 2.0 1 --- 0.3 --- 0.5 0.1 2 ---TAME 1.0 - 18.0 --- 3.5 1 18 7.5 12 --- ---1,2- Dimethoxyethane (ISTD) 4 4 4 4 4 4 4 ---RFA Gasoline 70.2 68.8 68.7 68.5 68.5 68.8 68.4 100Total oxygenates & ISTD 29.8 31.2 31.3 31.5 31.5 31.2 31.6 0Oxygenates Calibration Curve without Internal StandardM-GRO-CAL-SET$ 850 / set of 8 x 10 mLof 14 Comp. MixOriginally designed forD-5599-95Actual weights and weight percents areprovided with all ASTM/EPA SolutionsAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Std. 8Calibration range Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. %Methanol 0.1 - 5.0 --- 0.1 2.5 --- 5 0.5 1 ---Ethanol 1.0 - 12.0 12 --- 3 --- 8 5 1 ---Isopropanol 0.1 - 2.0 2 1 --- 0.1 0.3 --- 0.5 ---t-Butanol 0.1 - 2.0 0.5 0.1 1 --- 2 0.3 --- ---Propanol 0.2 - 2.0 2 --- 0.7 0.2 1 --- 0.4 ---MtBE 1.0 - 17.0 5 17 --- --- 1 2.5 10 ---sec-Butanol 0.1 - 2.5 1 --- 0.5 0.1 --- 2.5 0.7 ---Diisopropyl ether 0.1 - 2.0 --- 0.5 0.3 0.1 2 1 --- ---iso-Butanol 0.1 - 2.0 2 0.5 --- 1 0.1 0.3 --- ---EtBE 1.0 - 18.0 --- 3.5 18 7.5 --- 1 12 ---t-Pentanol 0.1 - 2.0 0.3 1 --- 0.5 0.1 2 --- ---Butanol 0.1 - 2.0 1 --- 0.3 --- 0.5 0.1 2 ---TAME 1.0 - 18.0 --- 3.5 1 18 7.5 12 --- ---RFA Gasoline 74.2 64.8 64.7 64.5 64.5 64.8 64.4 100Total oxygenates 25.8 27.2 27.3 27.5 27.5 27.2 27.6 0Technical NoteOxygenate Calibration CurvesISTD-Free and LargerPackaging Size.AccuStandard has receivedrequests from the PetroleumIndustry to formulate our D-5599Oxygenate product without internalstandard (ISTD) and package it in alarger volume. We have met thoserequests by introducing theM-GRO-CAL-SET calibration curve.This curve is manufactured withoutincorporating an internal standardand is packaged in Ready-to-Use10 mL sample volume.The certified oxygenate calibrationcurve can be used in combinationwith other aromatic standards forcombined oxygenate/aromaticanalysis, to change the amount ofinternal standard added, or toincorporate alternative internalstandard analytes.D-5599MeetsEPA Guidelinesfor RFGAnalysisTechnical NoteAccuStandard’s M-GROoxygenate calibration curve hasbeen successfully used byPetroleum Refineries andsupporting laboratories for bothASTM Method D-5599 andASTM Method D-4815. Inaddition, AccuStandard’scertified oxygenate chemicalreference materials provide thefollowing features and benefitsfor superior performance andvalue.Benefits from AccuStandard’s OxygenatesFeatures:Benefits:Analytes checked for chemical purity & water content The use & validation of the highest purity neats enhance the integrity of the standard.Analyzed by Independent LaboratoriesCertified method specific calibration standardsElimination of standards preparationInternal Standards incorporatedWeights and weight percents providedAll necessary solutions includedVariations in Packaging sizeEconomicalIndependent product validation of certified values.Increased confidence in analytical results.Time is utilized quantifying samples.Ready-to-Inject Standards.Ease of use in performing back calculations.Provides single source for sample analysis.Meet laboratory sample volumes.Time is spent on analysis rather than preparing stds.7 stds. used to generate 5 point curve Generate a 5 point curve in 30% less time than competitors' 10 standard set.34 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5599MemberASTM D-5599ContinuedDaily Quality Control Standard(without Internal Standard)Oxygenates in Gasoline by GC & O-FIDASTM/EPA Oxygenate Quality Control StandardsM-GRO-QC-10ML$ 100 / 1 x 10 mLM-GRO-QC-10ML-PAK SAVE 20% $ 400 / 5 x 10 mLCompound Target Compound TargetOxygenate Wt. % Oxygenate Wt. %Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1Di-isopropyl ether 3iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3RFA Gasoline 7914 comps. 100Revised Daily Quality Control Standard(without Internal Standard)M-GRO-QC-R-10MLM-GRO-QC-R-10ML-PAKCompound TargetOxygenate Wt. %Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1Di-isopropyl ether 1Originally designed forD-5599-95$ 100 / 1 x 10 mLSAVE 20% $ 400 / 5 x 10 mLCompound TargetOxygenate Wt. %iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3RFA Gasoline 8114 comps. 100D-5599MeetsEPA Guidelinesfor RFGAnalysisTechnical NoteThe Daily Quality ControlStandard M-GRO-QC-R wasdeveloped in response to yourrequests for a QC mixbracketed by the CalibrationCurve.AccuStandard reduced thediisopropyl ether content from 3Wt. % to 1 Wt. % to meet themethod specifications.ASTMDaily Quality Control Standard(with Internal Standard)M-GRO-QC/IS-5ML$ 75 / 1 x 5 mLM-GRO-QC/IS-5ML-PAK SAVE 27% $ 275 / 5 x 5 mLCompound Target Compound TargetOxygenate Wt. % Oxygenate Wt. %Methanol 1 Di-isopropyl ether 3Ethanol 1 iso-Butanol 1Isopropanol 1 EtBE 3t-Butanol 1 t-Pentanol 1Propanol 1 Butanol 1MtBE 3 TAME 3sec-Butanol 1RFA Gasoline 791,2-Dimethoxyethane (ISTD) is combined withthe above 14 comps. in a 4 to 100 weight ratio15 comps.100Revised Daily Quality Control Standard(with Internal Standard)M-GRO-QC-R/IS-5ML$ 75 / 1 x 5 mLM-GRO-QC-R/IS-5ML-PAK SAVE 27% $ 275 / 5 x 5 mLCompound Target Compound TargetOxygenate Wt. % Oxygenate Wt. %Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1Di-isopropyl ether 1iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3RFA Gasoline 811,2-Dimethoxyethane (ISTD) is combined withthe above 14 comps. in a 4 to 100 weight ratio15 comps.100Technical NoteAdditional Oxygenate calibration,check standards, andindependent reference standardscan be found in ASTM methodD-4815 (page 24) or D-5622(page 37). The required QA/QCprocedures in EPA methodsstipulate a calibration checkstandard be used once peranalytical batch or per 10 sampleset. AccuStandard has bulkpackaged check standards tomeet this increased usage.Gasoline Refinery Blank(with Internal Standard)M-GRO-BLNK/IS-10ML$ 15 / 1 x 10mLM-GRO-BLNK/IS-10ML-PAK SAVE 20% $ 60 / 5 x 10mL2 comps.Wt. %1,2- Dimethoxyethane (ISTD) 4RFA Gasoline 96O-FID/EPA Gasoline RefineryInternal StandardM-GRO-IS-5ML$ 10 / 1 x 5 mLM-GRO-IS-5ML-PAK SAVE 20% $ 40 / 5 x 5 mL1,2- Dimethoxyethane (ISTD)O-FID Gasoline Refinery BlankM-GRO-BLNK-10ML$ 10 / 1 x 10mLM-GRO-BLNK-10ML-PAK SAVE 20% $ 40 / 5 x 10mLRFA Gasoline (neat)Fax 203-786-5287 • AccuStandard • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 35


Method 5599ASTMMemberOxygenates Using O-FIDEPA O-FID Oxygenate Petrochemical StandardsAccuStandard has formulated this second oxygenate version to meet the specific analyte requirements set forth in the EPA methodology.ASTMASTM D-5599EPA Gasoline Refinery Oxygenates Calibration CurvesEPA O-FID Quantitative Calibration Mixes (without Internal Standard)M-GRO-CAL-EPA-SET-10ML$ 350 / set of 5 x 10 mL5 comps.Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Calibr. range Wt. % Wt. % Wt. % Wt. % Wt. %Methanol 0.30 - 12.00 6.00 12.00 3.00 0.30 9.00Ethanol 0.30 - 12.00 0.30 3.00 6.00 9.00 12.00t-Butanol 0.30 - 12.00 0.30 6.00 9.00 12.00 3.00MtBE 0.30 - 15.00 15.00 7.50 11.25 3.75 0.30RFA Gasoline 78.40 71.50 70.75 74.95 75.70Originally designed forD-5599-95For our complete line ofOrganic Standards,request a copy of ourCatalog.EPA O-FID Quantitative Calibration Mixes (with Internal Standard)M-GRO-CAL-IS/EPA-SET$ 175 / set of 5 x 1 mL6 comps.Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Calibr. range Wt. % Wt. % Wt. % Wt. % Wt. %Methanol 0.29 - 11.40 5.70 11.40 2.85 0.29 8.55Ethanol 0.29 - 11.40 0.29 2.85 5.70 8.55 11.40t-Butanol 0.29 - 11.40 0.29 5.70 8.55 11.40 2.85MtBE 0.29 - 14.29 14.25 7.13 10.69 3.56 0.291,2-Dimethoxyethane (ISTD) 5.00 5.00 5.00 5.00 5.00RFA Gasoline 74.48 67.93 67.31 71.20 71.92EPA O-FID Quantitative CalibrationCheck Standard(without Internal Standard)M-GRO-EPA-CC-10ML$ 50 / 1 x 10 mLM-GRO-EPA-CC-10ML-PAKSAVE 20% $ 200 / 5 x 10 mL5 comps.Wt./Wt. %Methanol 4.0Ethanol 8.0tert-Butanol 5.0Wt./Wt. %Methyl tert-butyl ether 12.0RFA gasoline 71.0EPA O-FID Spiking SolutionM-GRO-EPA-SP-5MLM-GRO-EPA-SP-5ML-PAKWt./Wt. %Methanol 14.3Ethanol 28.6$ 50 / 1 x 5 mLSAVE 20% $ 200 / 5 x 5 mL4 comps.Wt./Wt. %tert-Butanol 14.3Methyl tert-butyl ether 42.8EPA O-FID Quantitative CalibrationCheck Standard(with Internal Standard)M-GRO-EPA-CC/IS-5ML$ 35 / 1 x 5 mLM-GRO-EPA-CC/IS-5MLPAK SAVE 20% $ 150 / 5 x 5 mL6 comps.Wt./Wt. %Methanol 3.80Ethanol 7.60tert-Butanol 4.75Wt./Wt. %Methyl tert-butyl ether 11.40RFA gasoline 67.45DME (internal standard) 5.0Oxygenate Free Gasoline RefineryBlankM-GRO-BLNK-10MLM-GRO-BLNK-10ML-PAKRFA Gasoline (neat)$ 10 / 1 x 10 mLSAVE 20% $ 40 / 5 x 10 mLTechnical NoteAdditional Oxygenate calibration,check standards, and independentreference standards can be found inASTM method D-4815 (page 24) orD-5622 (page 37). The requiredQA/QC procedures in EPA methodsstipulate a calibration checkstandard be used once peranalytical batch or per 10 sampleset. AccuStandard has bulkpackaged check standards to meetthis increased usage.Internal StandardM-GRO-IS-5MLM-GRO-IS-5ML-PAK$ 10 / 1 x 10 mLSAVE 20% $ 40 / 5 x 10 mL1,2-Dimethoxyethane (ISTD)Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted byASTM Method see beginning of Catalog36 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 56005622MemberASTM D-5600 Trace Metals in Petroleum Coke by ICP-AESMulti-Element Calibration Standard Hydrochloric Acid DiluentD-5600-01-1$ 225 / 1 x 100 mL500 µg/mL each in 2-5% HNO 3 tr. HF 12 comps.AluminumBariumCalciumIronASTM D-5622MagnesiumManganeseNickelSiliconStandards of InterestSodiumTitaniumVanadiumZincIndividual ICP Standards are on pages 67-72.Total Oxygen in Gasoline & MeOH Fuels by Reductive PyrolysisStandards of InterestsSee ASTM Methods D-4815 (page 24) and D-5599(pages 34-36) for additional oxygenate calibrationstandards.D-5600-BLH-5D-5600-BLH-L20% HCl in ASTM Type II waterLithium Borate DiluentD-5600-LIB-1D-5600-LIB-52.0% Lithium Borate in 10% HCl$ 50 / 1 x 500 mL$ 65 / 1 x 1 L$ 125 / 1 x 100 mL$ 180 / 1 x 500 mLOxygenate UnitCat. No. Description (2 x 10 mL, plus an RFA gasoline blank) Wt. % PriceASTM-P-0061-SET * Ethanol in Oxygenate free RFA gasoline 5.0 3 x 10 mL $ 50ASTM-P-0062-SET * Ethanol in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0063-SET * t-Amyl methyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0064-SET * t-Amyl methyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50ASTM-P-0065-SET * Ethyl t-butyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0066-SET * Ethyl t-butyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50ASTM-P-0067-SET * Methyl t-butyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0068-SET * Methyl t-butyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50ASTM-P-0069-SET * Methanol & t-Butanol in Oxygenate free RFA gasoline 10.0 & 5.0 3 x 10 mL 50* Each Set includes M-GRO-BLNK-10MLOxygenate Free Gasoline Refinery BlankM-GRO-BLNK-10ML$ 10 / 1 x 10 mLRFA Gasoline (neat)Technical NoteOriginally designed forD-5600-98Use M-GRO-BLNK-10ML as anoxygenate free RFA gasoline matrix tomake up your own oxygenate standardsor call our Technical Dept. to have aStandard custom made for you.Technical NoteD-5600 Ready-to-AspirateStandardsAccuStandard has formulated thefollowing stock standards forASTM Method D-5600. We haveprepared numerous Ready-to-Aspirate ICP multi-elementsolutions. Should your companywant to eliminate the preparationprocess for Inorganic standardscontact our Technical Departmentfor a quote on a Ready-to-Aspirate working level Inorganicstandard.Originally designed forD-5622-95Technical NoteAccuStandard’s Oxygenatereference fuel line wasdesigned as a cost effectivealternative for PetrochemicalLaboratories. All oxygenateblends come with a certificateto maintain traceability links toNIST SRMs (when available).By packaging the standard in10 mL sealed ampules yourlaboratory will realize costsavings. The 10 mL sizeavoids having specialpackaging and hazardousmaterial fees billed to yourinvoice.ASTMFor our complete line ofInorganic Standards,request a copy of ourInorganics Catalog.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 37


Method 5623ASTM StandardsMemberASTM D-5623Sulfur Compounds in Light Petroleum Liquids by GC andSulfur Selective DetectionOriginally designed forD-5623-94ASTMThis set of qualitative Sulfur Standards are formulated for research evaluation of the presence of the sulfuranalytes or their breakdown products.ASTM-P-0091-10X-SETApprox. 2.0 mg/mL each in Toluene$ 625 / set of 22 x 1 mLAnalyte Cat. No. Unit PriceHydrogen sulfide ASTM-P-0091-01-10X 1 x 1 mL $ 35Carbonyl sulfide (Carbon oxysulfide) ASTM-P-0091-02-10X 1 x 1 mL 35Methyl mercaptan (Methanethiol) ASTM-P-0091-03-10X 1 x 1 mL 35Ethyl mercaptan (Ethanethiol) ASTM-P-0091-04-10X 1 x 1 mL 35Methyl sulfide (Dimethyl sulfide) ASTM-P-0091-05-10X 1 x 1 mL 35Carbon disulfide ASTM-P-0091-06-10X 1 x 1 mL 352-Propanethiol (Isopropyl mercaptan ASTM-P-0091-07-10X 1 x 1 mL 352-Methyl-2-propanethiol (t-butyl mercaptan) ASTM-P-0091-08-10X 1 x 1 mL 351-Propanethiol (Propyl mercaptan) ASTM-P-0091-09-10X 1 x 1 mL 35Ethyl methyl sulfide ASTM-P-0091-10-10X 1 x 1 mL 351-Methyl-1-propanethiol (2-butanethiol) ASTM-P-0091-11-10X 1 x 1 mL 35Thiophene ASTM-P-0091-12-10X 1 x 1 mL 352-Methyl-1-propanethiol (Isobutyl mercaptan) ASTM-P-0091-13-10X 1 x 1 mL 35Diethyl sulfide ASTM-P-0091-14-10X 1 x 1 mL 351-Butanethiol (Butyl mercaptan) ASTM-P-0091-15-10X 1 x 1 mL 35Methyl disulfide (Dimethyl disulfide) ASTM-P-0091-16-10X 1 x 1 mL 352-Methylthiophene ASTM-P-0091-17-10X 1 x 1 mL 353-Methylthiophene ASTM-P-0091-18-10X 1 x 1 mL 35Diethyl disulfide (Ethyl disulfide) ASTM-P-0091-19-10X 1 x 1 mL 353-Methylbenzo[b]thiophene ASTM-P-0091-20-10X 1 x 1 mL 355-Methylbenzo[b]thiophene ASTM-P-0091-21-10X 1 x 1 mL 75Diphenyl sulfide ASTM-P-0091-22-10X 1 x 1 mL 35Custom Ampulling for Bulk Quantity RequirementsFill Volumes from 0.2 mL to 20 mL• FlammablesQC Services availableAccuStandard has the resources and equipment to meet yourcustom packaging requirements. Our full automated filler-sealercan accommodate a fill range from 0.2 to 20 mL, and ampulesizes from 1 mL to 20 mL.AccuStandard has extensive experience with Round Robinsamples for ASTM committees.Call our Technical Department for a quotation.We can reduce your costs by using the Cozzoli Auto Filling/Sealing Machine topackage just the right size product for your application.38 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5599MemberASTM D-5708Nickel, Vanadium, & Iron in Crude Oils & Residual Fuels by ICP-AESOriginally designed forD-5708-95aTest Method A - ICP with an Organic Solvent Specimen SolutionSulfur and Metals in Mineral OilASTM-P-0102-SET$ 1850 / 100 mLSulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price(Wt. %) (µg/g) (µg/g) (µg/g) 100 mLASTM-P-0102-01 0.00 0 0 0 $ 200ASTM-P-0102-02 0.50 300 10 500 200ASTM-P-0102-03 1.00 500 100 25 200ASTM-P-0102-04 - 100 80 250 200ASTM-P-0102-05 2.00 200 40 100 200ASTM-P-0102-06 2.50 400 5 400 200ASTM-P-0102-07 3.00 0 60 300 200ASTM-P-0102-08 3.50 500 0 200 200ASTM-P-0102-09 - 100 100 0 200ASTM-P-0102-10 4.50 300 50 250 200ASTM-P-0102-11 5.00 200 20 500 200ASTM-P-0102-12 5.50 50 100 50 200Sulfur and Metals in Residual Fuel OilASTM-P-0103-SET$ 2100 / 100 mLSulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price(Wt. %) (µg/g) (µg/g) (µg/g) 100 mLASTM-P-0103-01 0.00 0 0 0 $ 200ASTM-P-0103-02 0.50 300 10 500 200ASTM-P-0103-03 1.00 500 100 25 200ASTM-P-0103-04 - 100 80 250 200ASTM-P-0103-05 2.00 200 40 100 200ASTM-P-0103-06 2.50 400 5 400 200ASTM-P-0103-07 3.00 0 60 300 200ASTM-P-0103-08 3.50 500 0 200 200ASTM-P-0103-09 - 100 100 0 200ASTM-P-0103-10 4.50 300 50 250 200ASTM-P-0103-11 5.00 200 20 500 200ASTM-P-0103-12 5.50 50 100 50 200Stock Multi-Element inMineral OilD-5708-A-10X $ 150 / 4 oz.100 µg/g in 20 cSt mineral oil3 comps.IronNickelVanadiumStandards of InterestsSee Table of Contents forthe Wear Metals Grouppages.For our complete line ofInorganic Standards,request a copy of ourInorganics CatalogASTMWEAR METALSStock Multi-ElementAqueous StandardD-5708-B-10X-1D-5708-B-10X-5Each at 100 µg/mL in 2-5% HNO 3IronNickelTest Method B - ICP after Acid Decomposition of Sample$ 60 / 100 mL$ 115 / 500 mL3 comps.VanadiumWorking Level Multi-ElementAqueous StandardD-5708-B-5Each at 10 µg/mL in 2-5% HNO 3IronNickel$ 105 / 500 mL3 comps.VanadiumNitric Acid BlankCLP-BLN-5CLP-BLN-L$ 30 / 500 mL$ 45 / L (2 x 500 mL)5% HNO 3 in ASTM Type I WaterMemberAccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 39


Method 5762ASTM StandardsMemberASTM D-5762Stock Nitrogen StandardD-5762-95-500X-PAKNitrogen in Petroleum & Petroleum Products by Boat-Inlet Chemiluminescence$ 45 / 5 x 1 mLOriginally designed forD-5762-98ASTMNitrogen @ 500 µg/mL in Xylene (Acridine @ 6397 µg/mL)Nitrogen Calibration SetD-5762-95-CAL-SET $ 75 / 6 x 1 mLCat. No. Description UnitD-5762-95-BL Xylene Blank 1 x 1 mLD-5762-95-1X Nitrogen @ 1.0 µg/mL in Xylene 1 x 1 mLD-5762-95-5X Nitrogen @ 5.0 µg/mL in Xylene 1 x 1 mLD-5762-95-10X Nitrogen @ 10 µg/mL in Xylene 1 x 1 mLD-5762-95-50X Nitrogen @ 50 µg/mL in Xylene 1 x 1 mLD-5762-95-100X Nitrogen @ 100 µg/mL in Xylene 1 x 1 mLTechnical NoteNitrogen introduced usingAcridine.Low level Nitrogen Calibration SetASTM-P-0070-SET $ 75 / 6 x 1 mLCat. No. Description UnitASTM-P-0070-BL Isooctane Blank 1 x 1 mLASTM-P-0070-1X Nitrogen @ 0.5 µg/g in Isooctane 1 x 1 mLASTM-P-0070-2X Nitrogen @ 1.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-4X Nitrogen @ 2.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-10X Nitrogen @ 5.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-20X Nitrogen @ 10.0 µg/g in Isooctane 1 x 1 mLTechnical NoteNitrogen introduced usingAcridine.Low level Nitrogen & Sulfur Calibration SetASTM-P-0071-SET $ 50 / 4 x 1 mLCat. No. Description UnitASTM-P-0071-BL Benzene Blank 1 x 1 mLASTM-P-0071-01 Nitrogen @ 0.25 µg/g & Sulfur @ 0.25 µg/g in Benzene 1 x 1 mLASTM-P-0071-02 Nitrogen @ 0.50 µg/g & Sulfur @ 0.50 µg/g in Benzene 1 x 1 mLASTM-P-0071-03 Nitrogen @ 1.00 µg/g & Sulfur @ 1.00 µg/g in Benzene 1 x 1 mLTechnical NoteThe Nitrogen isintroduced usingAniline and the Sulfuris introduced usingn-Butyl sulfide.AccuPetroCheck and AccuPetroTest Real World Gasoline QC StandardsIn cooperation with ASTM D-02 subcommittee 3 and 4, AccuStandard ampulled 21 Real World gasoline reference fuels. Consensus Values havebeen determined for these reference fuels by various ASTM Round Robins to provide Petrochemical Laboratories with a source of wellcharacterized gasoline standards for use in QA/QC applications and as Single Blind test samples over an extended period of time. As new ASTMD-02.03 and D-02.04 Test methods are promulgated they require mandatory Quality Control testing of real world samples. AccuStandard’sAccuPetroTest & AccuPetroCheck standards are being successfully used to achieve these new Quality Control requirements.QC StandardsCARB Low Sulfur RFG QCStandardASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mLParameter Method Value Conc.Total Aromatics D-1319 24.5 Vol.%Total Olefins D-1319 5.3 Vol.%Total Saturates D-1319 58.3 Vol.%Sulfur D-2622 0.0057 Wt.%Sulfur D-4294 0.0078 Wt.%Sulfur D-5453 55.76 µg/gSulfur D-6344 59.31 µg/gBenzene D-5769 0.80 Vol.%Toluene D-5769 4.92 Vol.%Total Aromatics D-5769 23.42 Vol.%Benzene D-6227 0.78 Vol.%Total Olefins D-6550 5.3 Vol.%Conventional Gasoline QCStandardASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mLParameter Method Value Conc.Total Aromatics D-1319 34.6 Vol.%Total Olefins D-1319 12.4 Vol.%Total Saturates D-1319 62.8 Vol.%Sulfur D-2622 0.0338 Wt.%Sulfur D-4294 0.0368 Wt.%Sulfur D-5453 317.36 µg/gSulfur D-6344 338.78 µg/gBenzene D-5769 0.55 Vol.%Toluene D-5769 5.53 Vol.%Total Aromatics D-5769 32.51 Vol.%Benzene D-6227 0.52 Vol.%Total Olefins D-6550 12.4 Vol.%AccuPetroCheck QC StandardsTwo of the fuels are available as AccuPetroCheckConsensus Value QC Standards. TheAccuPetroCheck CARB and Conventionalgasoline reference materials have all parameterslisted on the certificate with the Consensus Valuesand the regression equations for reproducability.Use of these Reference Materials improve thequality of laboratory results. The ConsensusValues listed reflect initial statistical treatment ofthe data at the time the catalog was published.The actual certificate provided with theAccuPetroCheck QC standard will have theaccepted Consensus Value based on statisticaltreatment of the data.40 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Petrochemical StandardsMemberAccuPetroTestSulfur in Diesel Fuel QC StandardSBPT-SDF$ 25 / 2 x 15 mLParameterApprox. RangeSulfur20 - 11000 mg/kgSee ASTM Methods D-2622, D-3120, D-3246-92,D-4294, D-5453, for Sulfur Calibration StandardsAccuPetroTest GasolineSulfur in White Mineral Oil QCStandardSBPT-SWMO$ 25 / 2 x 15 mLParameterApprox. RangeSulfur20 - 11000 mg/kgSee ASTM Methods D-2622, D-3120,D-3246-92, D-4294, D-5453 for SulfurCalibration StandardsSulfur Single Blind AccuPetroTestAlternative Matrices StandardsAccuStandard has manufactured a number ofDiesel and White Mineral Oil quality controlproducts containing a gravimetrically preparedamount of Sulfur. Use of these alternativematrix materials can provide further evaluationof the QA/QC process in the laboratory. Twosamples will be sent for the test parameter anda separate sealed envelope containing thegravimetrically prepared sulfur values is alsoprovided. The second sample is forrepeatability testing or for use as a futureQA/QC reference.ASTMLow Sulfur QC SampleSBPT-LSGAS$ 25 / 2 x 15 mLParameter Method Approx. RangeSulfur 5453 0 - 50 µg/gOlefin QC SampleSBPT-OLEFINSFC$ 25 / 2 x 15 mLParameter Method Approx. RangeOlefins 6550 1 - 40 Vol.%AccuPetroTest Gasoline QCOlefins QC SampleSBPT-OLEFIN$ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Aromatics D-1319 8-60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30-80 Vol. %See ASTM Method D-1319 for Sulfur CalibrationStandardsAromatics QC SampleSBPT-AROM$ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Aromatics D-5769 8 - 60 Vol.%See ASTM Methods D-3606, D-5580-95, D-5769-95for Benzene Calibration StandardsSulfur QC SampleSBPT-SGAS$ 25 / 2 x 15 mLParameter Method Approx. RangeSulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 4.0 - 500 µg/gSulfur D-XXXX 1.0 - 1000 µg/gSee ASTM Methods D-2622, D-3120, D-3246-92,D-4294, D-5453 for Sulfur Calibration StandardsBenzene/Toluene QC SampleSBPT-BENZ$ 25 / 2 x 15 mLParameter Method Approx. RangeBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%See ASTM Methods D-3606, D-5580-95, D-5769-95for Benzene Calibration StandardsAccuPetroTest Single BlindStandardsPetrochemical Laboratories looking totest the performance of the laboratory fora specific parameter can order the SingleBlind AccuPetroTest sample for theparameter of interest. Two real worldgasoline samples will be sent for the testparameter requested and a separate sealedenvelope containing the determinedConsensus Value is also provided. Thesecond sample is for repeatability testingor as a future QA/QC reference.AccuPetroTest GasolineComprehensive Single Blind Gasoline QCSampleSBPT-COMP$ 50 / 2 x 15 mLParameter Method Approx. Range Conc.Total Aromatics D-1319 8 - 60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30 - 80 Vol.%Sulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 0.5 -500 µg/gSulfur D-6344 1.0 - 1000 µg/gBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%Total Aromatics D-5769 8 - 60 Vol.%Benzene D-6277 0.1 - 2.0 Vol.%Total Olefins D-6550 1 - 40 Vol.%Technical NoteOur new comprehensive single blindgasoline QC sample tests for moreparameters from a single sample.The actual gasoline sample willhave consensus values listed on thedatasheet that fall within the rangelisted for each parameter.Test toLow ppbSulfurSee Pages 6-11Conducting a Petrochemical Round Robin for a new ASTM method?Select AccuStandard to prepare the necessary samples for the Round Robinstudy.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 41


Method 5769ASTM StandardsMemberASTMASTM Method D-5769-98Benzene, Toluene, and Total Aromatics in Finished Gasoline by GC/MSASTM D-5769Benzene, Toluene & Total Aromatics in Finished Gasoline by GC/MSAll of your standards requirements for ASTM Method D-5769 have been put together in thefollowing 10 pages. These standards and methods are used in the monitoring of TotalAromatics according to the latest methods and amendments to the US Clean Air Act.A set of Amendments, containing more stringent specifications became effective January 1,1995 limiting the volatility and composition of reformulated gasoline.The D-02 Committee of the American Society of Testing Materials, developed a standard testmethod D-5769 for the determination of the analyte composition by GC/MS of reformulatedgasoline.Aromatic Product Line yields the following important benefitsOriginally designed forD-5769-98Features:Benefits:Purity and Identity of all analytes verified .......... Impurity interferences in analyte retention timeunder identical operating conditionswindow are compensated.Certified method specific calibration standards . Increased confidence in analytical results.Eliminates preparation of calibration standards ..Time is utilized quantifying actual samples.Internal Standards Incorporated .........................Saves time.Weights and weight percents provided .............. Ease of use in performing back calculations.Includes all necessary solutions .........................Complete single source for reference materials.Variations in packaging size .............................. Meet laboratory sample volumes and demands.Low Cost ............................................................ More economical to purchase than to prepare standards.Flexibility ............................................................ Meet your lab requirements/method changes.Only 5 standards needed for a 5 Point Curve ... Generate a full calibration curve in 1/2 the time of thetwo set version composed of 10 standards.No charge disk deliverable calibration curve .... Direct computer uploading eliminates the input of 135weights (CALAMTS)separate data points.42 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5769MemberASTM D-5769Benzene, Toluene & Total Aromatics in Finished Gasoline by GC/MSOriginally designed forD-5769-95Standards Designed for ASTM D-5769 as published in the 1997 Annual Book of ASTM Standards,Vol. 05.03 Petroleum Products and Lubricants (III): D-4636-latest; CatalystsThe following M-GRA catalog numbers contain the necessary calibration curves, daily quality control, andinternal standards designed to meet the promulgated GC/MS Aromatic method listed in the 1997 ASTMBook of Standards.AccuStandard offers two different versions of the M-GRA catalog numbers: M-GRA three componentinternal standard version, and the M-GRA four component internal standard version.The three component internal standard version contains the necessary deuterated analytes for fullqualitative and quantitative analysis of the 25 components listed in the published version.The four component internal standard version was designed at the request of the petroleum refinerylaboratories. This four internal standard version incorporates not only the Benzene-d 6 , Ethyl benzene-d 10 ,Naphthalene-d 8 , but also Toluene-d 8 . Incorporating the Toluene-d 8 as the internal standard for thequantification of gasolines with higher Toluene levels has improved analytical results for this analyte.Incorporation of a 6th Calibration StandardA6th calibration standard has been formulated for the M-GRA product line to improve the linearity at thehigh end of the calibration curve see page 44. This sixth standard can be especially important in thequantification of gasoline samples containing high toluene levels. The formulation contains an analyteconcentration between the high level standard and the next level, which is standard two. Use of the sixthstandard provides an additional calibration point that is desirable when the calibration curve is developedusing a quadratic fit.ASTMM-GRA-K1 $ 600(Original Formulations)Kit includes: Units FunctionM-GRA-CAL/IS-SET 5 x 1 mL 5 Pt. Curve w/ 3 ISTD'sM-GRA-QC/IS-5ML 1 x 5 mL Daily QC w/ 3 ISTD'sM-GRA-IS-5ML 1 x 5 mL Internal Std. 3 comps.M-GRA-ST 1 x 1 mL Sensitivity Test SolutionSee page 44 for product description withanalytes & conc.Aromatics Kits for analysis by GC/MSFor your added convenience we haveprovided the following Aromatics Kitsto meet the analytical requirements forthis method.M-GRA-K2 $ 700(Developed for improved high concentration linearity)Kit includes: Units FunctionM-GRA-CAL/IS-SET 5 x 1 mL 5 Pt. Curve w/ 3 ISTD'sM-GRA-ADD/IS 1 x 1 mL 6th Std. for revison 5 FM-GRA-QC/IS-5ML 1 x 5 mL Daily QC w/ 3 ISTD'sM-GRA-IS-5ML 1 x 5 mL Internal Std. 3 comps.M-GRA-ST 1 x 1 mL Sensitivity Test SolutionSee page 44 for product description withanalytes & conc.M-GRA-K4 $ 850(Used to meet the Toluene-d 8 internal standard versionrecommended by a network of major petroleum refineries)Kit includes: Units FunctionM-GRA-CAL-R/IS-R-SET 5 x 1 mL 5 Pt. Curve w/ 4 ISTD'sM-GRA-ADD/IS-R 1 x 1 mL 6th Standard for rev. 5 FM-GRA-QC-R/IS-R-5ML 1 x 5 mL Daily QC w/ 4 ISTD'sM-GRA-IS-R-10ML 1 x 10 mL Internal Std. 4 comps.M-GRA-ST 1 x 1 mL Sensitivity Test SolutionSee page 45 for product description withanalytes & conc.Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted byASTM Method see beginning of CatalogFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 43


Method 5769ASTM StandardsMemberASTMASTM D-5769Calibration Curve with 3 Component Deuterated Internal Standard AddedAromatics Calibration Standards Kit(3 Internal Standard Version)M-GRA-CAL/IS-SET$ 375 / set of 5 x 1 mLCore Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 3 1.50 0.75 0.375 0.1875Toluene 19 9.50 4.75 2.375 1.1875Ethylbenzene 5 2.50 1.25 0.625 0.3125m-Xylene 6 3.00 1.50 0.750 0.3750p-Xylene 6 3.00 1.50 0.750 0.3750o-Xylene 6 3.00 1.50 0.750 0.3750Isopropylbenzene 3 1.50 0.75 0.375 0.1875n-Propylbenzene 3 1.50 0.75 0.375 0.18751-Methyl-3-ethylbenzene 3 1.50 0.75 0.375 0.18751-Methyl-4-ethylbenzene 3 1.50 0.75 0.375 0.18751,3,5-Trimethylbenzene 3 1.50 0.75 0.375 0.18751-Methyl-2-ethylbenzene 3 1.50 0.75 0.375 0.18751,2,4-Trimethylbenzene 5 2.50 1.25 0.625 0.31251,2,3-Trimethylbenzene 3 1.50 0.75 0.375 0.1875Indan 3 1.50 0.75 0.375 0.18751,4-Diethylbenzene 3 1.50 0.75 0.375 0.1875n-Butylbenzene 3 1.50 0.75 0.375 0.18751,2-Diethylbenzene 3 1.50 0.75 0.375 0.18751,2,4,5-Tetramethylbenzene 2 1.00 0.50 0.250 0.12501,2,3,5-Tetramethylbenzene 2 1.00 0.50 0.250 0.1250Naphthalene 2 1.00 0.50 0.250 0.1250Pentamethylbenzene 2 1.00 0.50 0.250 0.12501-Methylnaphthalene 2 1.00 0.50 0.250 0.12502-Methylnaphthalene 2 1.00 0.50 0.250 0.1250Isooctane -- Bal Bal Bal BalInternal Standard (M-GRA-IS)Benzene-d 6 2 2 2 2 2Ethylbenzene-d 10 2 2 2 2 2Naphthalene-d 8 1 1 1 1 1Daily Quality Control Standard(without Internal Standard)M-GRA-QC-10ML$ 125 / 1 x 10 mLM-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mLWt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 3Benzene 113 Comp. Core Mix 100Technical NoteUse with any M-GRA Calibration Curve.Optional Sixth Standardwith 3 Comp. DeuteratedInternal Standard AddedM-GRA-ADD/IS $ 100 / 1 x 1 mLCore Calibr. Mix Optional Std. 624 Comps. Target Vol. %Benzene 2.25Toluene 15Ethylbenzene 3.75m-Xylene 4.50p-Xylene 4.50o-Xylene 4.50Isopropylbenzene 2.25n-Proplylbenzene 2.253-Ethyltoluene 2.254-Ethyltoluene 2.251,3,5-Trimethylbenzene 2.252-Ethyltoluene 2.251,2,4-Trimethylbenzene 3.751,2,3-Trimethylbenzene 2.25Indan 2.251,4-Diethylbenzene 2.25n-Butylbenzene 2.251,2-Diethylbenzene 2.251,2,4,5-Tetramethylbenzene 4.01,2,3,5-Tetramethylbenzene 1.5Naphthalene 1.5Pentamethylbenzene 1.51-Methylnaphthalene 1.52-Methylnaphthalene 1.5IsooctaneBalInternal Standard (M-GRA-IS)Benzene-d 6 2Ethylbenzene-d 10 2Naphthalene-d 8 1Daily Quality Control Standard(with Internal Standard)M-GRA-QC/IS-5ML$ 100 / 1 x 5 mLM-GRA-QC/IS-5ML-PAK SAVE 20% $ 400 / 5 x 5 mLWt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 3Benzene 113 Comp. Core Mix 100Includes M-GRA-IS (3 Comp. Internal Standards mix)combined with the above 13 Comp. Core QC Mix:M-GRA-QC in a 5 to 100 weight ratio. 16 comps.Originally designed forD-5769-95Disk Deliverable(At no additional charge)Eliminates hand keyed-indata.CALAMTS(Disk containing “CalibrationAmounts”)Each analyte in eachstandard is individuallyweighed. Actual weightsand weight percents areprovided.ASTM/EPA Sensitivity Test SolutionM-GRA-ST$ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane1,4-Diethyl benzene3 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML$ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL3 comps.Compound Mix Ratio Compound Mix RatioBenzene-d 6 2 mL Naphthalene-d 8 1 gmEthylbenzene-d 10 2 mL44 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5769MemberASTM D-5769Calibration Curve with 4 Component Deuterated Internal Standard AddedOriginally designed forD-5769-95Aromatics Calibration Standards Kit(4 Internal Standard Version)M-GRA-CAL-R/IS-R-SET$ 425 / set of 5 x 1 mLCore Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %Optional Sixth Standardwith 4 Comp. DeuteratedInternal Standard AddedM-GRA-ADD/IS-R $ 100 / 1 x 1 mLCore Calibr. Mix Optional Std. 624 Comps. Target Wt. %ASTMBenzene 3.13 1.78 0.95 0.490 0.2490Toluene 19.65 11.11 5.90 3.058 1.5547Ethylbenzene 5.12 2.92 1.55 0.805 0.4090m-Xylene 6.27 3.50 1.86 0.962 0.4891p-Xylene 6.33 3.50 1.86 0.962 0.4891o-Xylene 6.51 3.56 1.89 0.980 0.4981Isopropylbenzene 3.06 1.74 0.93 0.480 0.2439n-Propylbenzene 3.04 1.74 0.93 0.480 0.24403-Ethyltoluene 3.08 1.75 0.93 0.481 0.24464-Ethyltoluene 3.05 1.74 0.93 0.479 0.24371,3,5-Trimethylbenzene 3.07 1.75 0.93 0.481 0.24482-Ethyltoluene 3.14 1.78 0.95 0.490 0.24921,2,4-Trimethylbenzene 5.18 2.95 1.57 0.812 0.41301,2,3-Trimethylbenzene 3.19 1.81 0.96 0.498 0.2530Indan 3.46 1.95 1.04 0.536 0.27261,4-Diethylbenzene 3.04 1.74 0.93 0.480 0.2439n-Butylbenzene 3.05 1.74 0.92 0.479 0.24341,2-Diethylbenzene 3.22 1.78 0.95 0.490 0.24891,2,4,5-Tetramethylbenzene 2.10 1.20 0.64 0.329 0.16741,2,3,5-Tetramethylbenzene 2.09 1.20 0.64 0.330 0.1679Naphthalene 2.35 1.34 0.71 0.369 0.1877Pentamethylbenzene 2.16 1.23 0.66 0.340 0.17271-Methylnaphthalene 2.32 1.34 0.71 0.369 0.18772-Methylnaphthalene 2.41 1.37 0.73 0.378 0.1922Isooctane ----- 43.47 69.96 84.441 92.0905Benzene 2.48Toluene 16.29Ethylbenzene 4.07m-Xylene 4.87p-Xylene 4.87o-Xylene 4.96Isopropylbenzene 2.43n-Propylbenzene 2.433-Ethyltoluene 2.444-Ethyltoluene 2.431,3,5-Trimethylbenzene 2.442-Ethyltoluene 2.481,2,4-Trimethylbenzene 4.111,2,3-Trimethylbenzene 2.52Indan 2.711,4-Diethylbenzene 2.43n-Butylbenzene 2.421,2-Diethylbenzene 2.481,2,4,5-Tetramethylbenzene 4.441,2,3,5-Tetramethylbenzene 1.67Naphthalene 1.87Pentamethylbenzene 1.721-Methylnaphthalene 1.872-Methylnaphthalene 1.91Isooctane 17.67Technical NoteThis set of calibration solutionswas formulated to improvequantification for Toluene byusing Toluene-d 8 as anadditional Internal Standard.Internal Standard(M-GRA-IS-R) Mix RatioBenzene-d 6 (2 mL) 16.57 16.57 16.57 16.57 16.57Ethylbenzene-d 10 (2 mL) 16.76 16.76 16.76 16.76 16.76Naphthalene-d 8 (1 gm) 8.78 8.78 8.78 8.78 8.78Toluene-d 8 (7 mL) 57.88 57.88 57.88 57.88 57.88Internal Standard(M-GRA-IS-R) Mix RatioBenzene-d 6 (2 mL) 16.57Ethylbenzene-d 10 (2 mL) 16.76Naphthalene-d 8 (1 mL) 8.78Toluene-d 8 (7 mL) 57.88The 4 component internal standard mix (M-GRA-IS-R) is combined with the 25 component core calibrationcurve mixtures in a 12 to 100 weight ratio to formulate a complete calibration solution containing 29 comps.Daily Quality Control Standard(without Internal Standard)M-GRA-QC-10ML$ 125 / 1 x 10 mLM-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mLWt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 3Benzene 113 Comp. Core Mix 1004 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML$ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAK SAVE 20% $ 900 / 5 x 10 mL4 comps.Compound Mix RatioBenzene-d 6 2 mLEthylbenzene-d 10 2 mLTechnical NoteCompound Mix RatioNaphthalene-d 8 1 gmToluene-d 8 7 mLUse with any M-GRA Calibration Curve.Daily Quality Control Standard(with Internal Standard M-GRA-IS-R)M-GRA-QC/IS-R-5ML$ 125 / 1 x 5 mLM-GRA-QC/IS-R-5ML-PAKSAVE 20% $ 500 / 5 x 5mLWt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 3Benzene 113 Comp. Core Mix 100Includes M-GRA-IS-R (4 Comp. Internal StandardsMix) combined with the above 13 Comp. Core QC Mix:M-GRA-QC in a 12 to 100 weight ratio. 17 comps.ASTM/EPA Sensitivity Test SolutionM-GRA-STM-GRA-ST-PAK100 µg/mL in Isooctane1,4-Diethyl benzene$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mLStandards of InterestFor the mandatory real worldQC samples stipulated in theMethod, see pages 1-2Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 45


Method 5769ASTM StandardsMemberASTM D-5769Version with No Internal StandardOriginally designed forD-5769-98ASTMThe following D-5769 and M-GRA Standards were formulated to address proposed and promulgatedchanges to ASTM Method D-5769-98 Aromatics by GC/MS. Many of these changes were evaluated and/or adopted due to the results generated from the 1997 Round Robin, which used a select group of 21gasolines ampulized by AccuStandard.AccuStandard is committed to staying abreast of ASTM committee D-02 method developments. We askthat you contact us when your analytical group finds a beneficial procedure or modification.ModificationsA Sixth Standard was added to meet the latest D-5769 method requirements and provide improvedlinearity at the high end of the Calibration curveThe Calibration Curve was packaged in two convenient sizes without the internal standard. Thispackaging scheme allows for the addition of any ISTD formulation or oxygenate components.The Quality Control Standard was reformulated in the latest D-5769 revision. The formulationchanges include reducing the 1,2,4,5-Tetramethylbenzene weight ratio and adding Naphthalene.The Benzene Target Weight % has been increased to meet the latest D-5769 method requirements.Pentamethylbenzene has now been removed from the analyte list.Calibration Curve with No Internal Std. AddedD-5769-CAL-SET-5MLD-5769-CAL-SET-10ML$ 1500 / Set of 5 x 5 mL$ 2750 / Set of 5 x 10 mLOptional Sixth StandardD-5769-ADD-5MLD-5769-ADD-10ML$ 150 / 1 x 5 mL$ 300 / 1 x 10 mLDisk Deliverable(At no additional charge)Eliminates hand keyed-indata.Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 523 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105Core Calibration Mix Target23 Comps. Wt. %Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92CALAMTS ®(Disk containing “CalibrationAmounts”)Each analyte in eachstandard is individuallyweighed. Actual weightsand weight percents areprovided.4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML$ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAK SAVE 20% $ 900 / 5 x 10 mL4 comps.MixMixCompound Ratio Compound RatioBenzene-d 6 2 mL Naphthalene-d 8 1 gmEthylbenzene-d 10 2 mL Toluene-d 8 7 mL3 Comp. Deuterated Internal Std. MixM-GRA-IS-5MLM-GRA-IS-5ML-PAKCompoundBenzene-d 6Ethylbenzene-d 10Naphthalene-d 8$ 150 / 1 x 5 mLSAVE 20% $ 600 / 5 x 5 mL3 comps.Mix Ratio2 mL2 mL1 gmDaily Quality Control Standard(without Internal Standard)D-5769-QC-10ML$ 125 / 1 x 10 mLD-5769-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mLWt.Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1Wt.CompoundRatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 2Naphthalene 114 Comp. Core Mix 10046 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5769MemberASTM D-5769Version with 3 Internal StandardsCore Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105Core Calibration Mix Target24 Comps. Wt. %Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92Originally designed forD-5769-98Calibration Curve with a 3 Comp.DeuteratedInternal Standard addedOptional Sixth Standardwith a 3 Comp. DeuteratedInternal Standard addedD-5769-CAL/IS-SET $ 375 / 5 x 1 mL D-5769-ADD/IS $ 100 / 1 x 1 mLTest toLow ppbSulfurSee Pages 6-11ASTMInternal StandardM-GRA-ISCompoundBenzene-d 6Ethylbenzene-d 10Naphthalene-d 8Mix ratio2 mL2 mL1 gmThe 3 Comp. Internal Standard Mix (M-GRA-IS) iscombined with the 24 Comp. Core Calibration Curve Mixesabove in a 5 to 100 weight ratio to formulate these27 Comp. calibration solutions.Daily Quality Control Standard(with Internal Standard)D-5769-QC/IS-5ML$ 100 / 1 x 5 mLD-5769-QC/IS-5ML-PAK SAVE 20% $ 400 / 5 x 5 mL17 comps.Wt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 2Benzene 1 Naphthalene 1Includes M-GRA-IS (3 component mix)added in 5 to 100 weight ratio1003 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML$ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL3 comps.CompoundMix RatioBenzene-d 62 mLEthylbenzene-d 102 mLNaphthalene-d 81 gmSensitivity Test SolutionM-GRA-ST$ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane1,4-Diethyl benzeneResolution StandardM-GRA-RESM-GRA-RES-PAKWt. %1,3,5-Trimethylbenzene 3.01-Methyl-2-ethylbenzene 3.0Isooctane 94$ 30 / 1 x 1 mL$ 120 / 5 x 1 mL3 comps.Fragmentation Pattern StandardM-GRA-FP$ 20 / 1 x 1 mLM-GRA-FP-PAK SAVE 20% $ 80 / 5 x 1 mL3.0% w/w in Isooctane1,2,3-TrimethylbenzeneMass Scan Range StandardM-GRA-MSR$ 20 / 1 x 1 mLM-GRA-MSR-PAK SAVE 20% $ 80 / 5 x 1 mL3.0% w/w in IsooctaneTolueneFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 47


Method 5769ASTM StandardsMemberASTMASTM D-5769 4 Internal Standard Version (includes Toluene-d 8 )Calibration Curve with a 4 Comp. DeuteratedInternal Standard addedD-5769-CAL/IS-R-SET$ 425 / 5 x 1 mLCore Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %Optional Sixth Standardwith a 4 Comp. DeuteratedInternal Standard addedD-5769-ADD/IS-R $ 100 / 1 x 1 mLCore Calibration Mix Target24 Comp. Wt. %Originally designed forD-5769-98Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92Internal StandardM-GRA-IS-RCompound Mix ratioBenzene-d 6 2 mLEthylbenzene-d 10 2 mLNaphthalene-d 8 1 gmToluene-d 8 7 mLThe 4 Comp. Internal Standard Mix (M-GRA-IS-R) iscombined with the 24 component core calibrationcurve mixtures above in a 12 to 100 weight ratio toformulate these 28 component calibration solutions.Daily Quality Control Standard(with Internal Standard)D-5769-QC/IS-R-5ML$ 100 / 1 x 5 mLD-5769-QC/IS-R-5ML-PAK SAVE 20% $ 400/5 x 5 mL18 comps.Wt.Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1Wt.CompoundRatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 2Naphthalene 1Includes M-GRA-IS-R (4 component mix)added in 12 to 100 weight ratio100Sensitivity Test SolutionM-GRA-STM-GRA-ST-PAK100 µg/mL in Isooctane1,4-Diethyl benzeneResolution StandardM-GRA-RESM-GRA-RES-PAKCompound Wt. %1,3,5-Trimethylbenzene 3.01-Methyl-2-ethylbenzene 3.0Isooctane 94$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mL$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mL3 comps.4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML$ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAK SAVE 20% $ 900/ 5 x 10 mLCompound Mix Ratio Compound Mix RatioBenzene-d 6 2 mL Naphthalene-d 8 1 gmEthylbenzene-d 10 2 mL Toluene-d 8 7 mLFragmentation Pattern StandardM-GRA-FP$ 20 / 1 x 1 mLM-GRA-FP-PAK SAVE 20% $ 80 / 5 x 1 mL3.0 w/w in Isooctane1,2,3-Trimethylbenzene48 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5769MemberASTM D-5769New Proposed / Promulgated Method ModificationsCalibration Curve with a 3 Comp. ChlorinatedInternal Standard addedD-5769-CAL/IS-R2-SET$ 375 / 5 x 1 mLCore Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %Optional Sixth Standardwith a 3 Comp. ChlorinatedInternal Standard addedD-5769-ADD/IS-R2 $ 100 / 1 x 1 mLCore Calibration Mix Target24 Component Wt.%Originally designed forD-5769-98ASTMBenzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92Disk Deliverable(At no additional charge)Eliminates hand keyed-indata.CALAMTS ®(Disk containing “CalibrationAmounts”)Internal StandardM-GRA-IS-R2Compound Mix ratioChlorobenzene2 mL1,2-Dichlorobenzene 2 mL1,2,4-Trichlorobenzene 1 mLDaily Quality Control Standard(with Internal Standard)D-5769-QC/IS-R2-5ML$ 100 / 1 x 5 mLD-5769-QC/IS-R2-5ML-PAKSAVE 20% $400/5 x 5 mL17 comps.Wt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 2Benzene 1 Naphthalene 1The 3 Comp. Internal Standard Mix (M-GRA-IS-R2)is combined with the 24 Comp. Core CalibrationCurve mixtures above in a 5 to 100 weight ratio toformulate these 27 Comp. calibration solutions.Sensitivity Test SolutionM-GRA-STM-GRA-ST-PAK100 µg/mL in Isooctane1,4-Diethyl benzeneFragmentation Pattern StandardM-GRA-FPM-GRA-FP-PAK3.0 w/w in Isooctane1,2,3-Trimethylbenzene$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mL$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mLEach analyte in eachstandard is individuallyweighed. Actual weightsand weight percents areprovided.Standards of InterestFor the mandatory real worldQC samples stipulated in theMethod, see pages 1-2.Includes M-GRA-IS-R2 (3 component mix)added in 5 to 100 weight ratio1003 Comp. Chlorinated Internal Std. MixM-GRA-IS-R2-SETM-GRA-IS-R2-25MLCompoundMix RatioChlorobenzene2 mL1,2-Dichlorobenzene 2 mL1,2,4-Trichlorobenzene 1 mL$125 / set of 25 x 1 mL$ 100 / 1 x 25 mL3 comps.Resolution StandardM-GRA-RESM-GRA-RES-PAKCompound Wt. %1,3,5-Trimethylbenzene 3.01-Methyl-2-ethylbenzene 3.0Isooctane 94$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mL3 comps.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 49


Method 5769ASTM StandardsMemberASTM D-5769Special QA/QC FormulationsOriginally designed forD-5769-98ASTMDaily Quality Control Standard(without Internal Standard)M-GRA-QC-R-10ML$ 125 / 1 x 10 mLM-GRA-QC-R-10ML-PAK SAVE 20% $ 500 / 5 x 10 mLWt.Wt.Compound Ratio CompoundRation-Hexane 12 Ethylbenzene 3n-Heptane 17 m-Xylene 3n-Octane 17 o-Xylene 3n-Decane 12 1,2,4-Trimethylbenzene 3n-Dodecane 5 1,2,4,5-Tetramethylbenzene 1Isooctane 12 Pentamethylbenzene 1Benzene 1 1-Methylnaphthalene 1Toluene 915 Comp. Core Mix 100Technical NoteSpecially formulated Daily Quality ControlStandards originally designed in response toclient requests for QC mixes that bracket thecurve and contain more C9+ analytes to verifythe instrument and QC solution integrity.Save 20-40%Buy AccuPAKsFor use with any M-GRACalibration CurveDaily Quality Control Standard(with Internal Standard M-GRA-IS)M-GRA-QC-R/IS-5ML$ 100 / 1 x 5 mLM-GRA-QC-R/IS-5ML-PAKSAVE 20% $ 400 / 5 x 5 mL18 comps.Wt.Wt.Compound Ratio CompoundRation-Hexane 12 Ethylbenzene 3n-Heptane 17 m-Xylene 3n-Octane 17 o-Xylene 3n-Decane 12 1,2,4-Trimethylbenzene 3n-Dodecane 5 1,2,4,5-Tetramethylbenzene 1Isooctane 12 Pentamethylbenzene 1Benzene 1 1-Methylnaphthalene 1Toluene 9Includes M-GRA-IS (3 Comp. Internal StandardsMix) combined with the above 15 Comp. CoreQC Mix: M-GRA-QC-R in a 5 to 100 weight ratio100Daily Quality Control Standard(with Internal Std. M-GRA-IS-R)M-GRA-QC-R/IS-R-5ML$ 125 / 1 x 5 mLM-GRA-QC-R/IS-R-5ML-PAK SAVE $ 500 / 5 x 5 mL19 comps.Wt.Wt.Compound Ratio CompoundRation-Hexane 12 Ethylbenzene 3n-Heptane 17 m-Xylene 3n-Octane 17 o-Xylene 3n-Decane 12 1,2,4-Trimethylbenzene 3n-Dodecane 5 1,2,4,5-Tetramethylbenzene 1Isooctane 12 Pentamethylbenzene 1Benzene 1 1-Methylnaphthalene 1Toluene 9Includes M-GRA-IS-R (4 Comp. Internal100Standards mix) combined with the above 15 Comp.Core QC Mix: M-GRA-QC-R in a 12 to 100 Wt. ratioAccuPAK ®Reduce reordering frequencyReduce data entry time forCalibration tables due toLot No. consistencyEconomical3 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML$ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL3 comps.Compound Mix RatioBenzene-d 62 mLEthylbenzene-d 10 2 mLNaphthalene-d 8 1 gm4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML$ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAK SAVE 20% $ 900 / 5 x 10 mL4 comps.Compound Mix RatioBenzene-d 62 mLEthylbenzene-d 10 2 mLNaphthalene-d 8 1 gmToluene-d 87 mLCustom Ampulling for Bulk Quantity RequirementsFill Volumes from 0.2 mL to 20 mL• FlammablesQC Services availableAccuStandard has the resources and equipment to meet your custom packagingrequirements. Our full automated filler-sealer can accommodate a fill range from0.5 to 20 mL, and ampule sizes from 1 mL to 20 mL.AccuStandard has extensive experience with Round Robin samples for ASTMcommittees.Call our Technical Department for a quotation.50 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5769MemberThrough a collaborative effort involving the instrument manufactures, Petrochemical end users, and Chemical Reference Standard manufacturers,the following proposed D-5769 method is under consideration. A number of end users would like to evaluate this proposed D-5769 method andhave asked AccuStandard to make the standards. We have formulated the following certified standards to meet those requests.Summary Proposed Modifications for D-5769• Calibration standards when combined with internal standards are diluted into significantly more isooctane.• The analytes in the Performance Standard have been expanded to better tune the GC/MS system for optimum performance.• The number of components in the QA/QC mix has been reduced with new QA/QC tolerances.• The number of analytes in the calibration mix has been reduced.• Samples that exceed the linear range are to be diluted, reducing the number of extra calibration points required.ASTMASTM D-5769-XXASTM-P-0140-SETCalibration Curve with No Internal Standard Added$ 1500 / Set of 5 x 5 mLASTM-P-0140-05ASTM-P-0140-04ASTM-P-0140-03ASTM-P-0140-02ASTM-P-0140-01Core Calibr. Mix Level 1 Level 2 Level 3 Level 4 Level 5Compound Target Mass % Mass % Mass % Mass % Mass %Benzene 5 3 1 0.5 0.1Toluene 12 9 6 3 0.5Ethylbenzene 5 3.75 2.5 1.25 0.21,3-Dimethylbenzene 10 7.5 5 2.5 0.21,4-Dimethylbenezene 5 3.75 2.5 1.25 0.21,2-Dimethylbenezene 5 3.75 2.5 1.25 0.2(1-Methylethyl)-benzene 3 2.25 1.5 0.75 0.21-Methyl-3-ethylbenzene 3 2.25 1.5 0.75 0.21-Methyl-4-ethylbenzene 3 2.25 1.5 0.75 0.21,3,5-Trimethylbenzene 3 2.25 1.5 0.75 0.21-Methyl-2-ethylbenzene 3 2.25 1.5 0.75 0.21,2,4-Trimethylbenzene 6 4.5 3 1.5 0.21,2,3-Trimethylbenzene 3 2.25 1.5 0.75 0.2Indan 3 2.25 1.5 0.75 0.21,2-Diethylbenzene 2 1.5 1 0.5 0.2Naphthalene A 2 1.5 1 0.5 0.12-Methylnaphthalene A 2 1.5 1 0.5 0.11-Methylnaphthalene A 2 1.5 1 0.5 0.1Isooctane (solvent) * balance balance balance balance balance4 Comp. Deuterated Internal Std. MixASTM-P-0140-ISASTM-P-0140-IS-PAKCompound Mass %Benzene-d 6 2Ethylbenzene-d 10 2$ 75 / 1 x 10 mL$ 300 / 5 x 10 mL4 comps.Compound Mass %Naphthalene-d 8 1Isooctane * balance4 Comp. Deuterated Internal Std. MixASTM-P-0140-IS2ASTM-P-0140-IS2-PAKCompound Mass %Benzene-d 6 2Ethylbenzene-d 10 2A= This component is a solid at roomtemperature$ 95 / 1 x 10 mL$ 380 / 5 x 10 mL5 comps.Compound Mass %Naphthalene-d 8 1Toluene-d 8 7Isooctane * balanceTechnical Note* The isooctane balance is theamount of material to make upa 100 mL calibration standard.Certificate will reflect actualweight of each component inthe 100 mL batch including theisooctane.Performance Evalutation StandardASTM-P-0140-PESASTM-P-0140-PES-PAKTargetCompound Mass %Benzene 11,2-Diethylbenzene 0.0051,3,5-Trimethylbenzene 11-Methyl-2-ethylbenzene 1Styrene 0.1Indene 0.1Biphenyl 0.11,2,4,5-Tetramethylbenzene 11,2,3,5-Tetramethylbenzene 1Hexadecane 1Isooctane:Toluene(1:1) * balance$ 55 / 1 x 1 mL$ 220 / 5 x 1 mL11 comps.Composition of Daily QC StandardASTM-P-0140-QC$ 125 / 1 x 10 mLASTM-P-0140-QC-PAK$ 500 / 5 x 10 mL9 comps.TargetCompound Mass %Benzene 1Toluene 10Ethylbenzene 31,3-Dimethylbenzene 61,2-Dimethylbenzene 31,2,4-Trimethylbenzene 31,2-Diethylbenzene 0.02Naphthalene 1Isooctane (solvent) * balanceFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 51


Method 5771577257735863MemberASTM StandardsASTM D-5771Cloud Point of Petroleum ProductsSee page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.ASTMASTM D-5772Cloud Point of Petroleum Products (Linear Cooling Rate Method)See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.ASTM D-5773Cloud Point of Petroleum Products (Constant Cooling Rate Method)See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.WEAR METALSASTM D-5863µg/mLIron 100Nickel 200Nickel, Vanadium, Iron, & Sodium in Crude Oils & Residual Fuels byFlame AA SpectrometryTest Method A - Sample Decomposition with Acid for Total Ni, V and FeDeterminationStock Multi-ElementAqueous StandardD-5863-95A-10X-1$ 75 / 1 x 100 mL2-5% HNO 3 3 comps.µg/mLVanadium 200Matrix BlankNitric Acid BlankCLP-BLN-5CLP-BLN-LIndividual High Concentration Elements in Aqueous Matrix1,000 µg/mL Conc.Element Matrix Unit Cat. No. PriceIron Fe 500 mL ICP-27N-5 $ 67in HNO 3Nickel Ni 500 mL ICP-37N-5 67in HNO 3Vanadium V 2 O 5 500 mL ICP-67N-5 67in HNO 35% HNO 3 in ASTM Type I Water$ 30 / 500 mLSAVE 33% $ 45 / L (2 x 500 mL)Originally designed forD-5863-00Standards of InterestSee page 73-75 for additionalTrace Metal Standards by AA.Test Method B - Sample Dilution with Organic Solvent for the Determination ofNi, V and Na using Oil-Soluble Metals as Calibrants.Stock Multi-Element Standard inMineral OilD-5863-95B-10XAt stated conc. in 20 cst Mineral Oilµg/gSodium 50Nickel 200$ 160 / 1 x 4 oz3 comps.µg/gVanadium 150Standards of InterestSee pages 59-65 for AccuStandard’scomprehensive line of Certified Oil DissolvedWear Metal calibration standards designed forflame AA Applications.52 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 5901 -5986MemberASTM D-5901 Freezing Point Aviation Fuels (Automated Optical Method)See page 5 for AccuStandard’s comprehensive line of Certified Freezing Point Standards.ASTM D-5972 Freezing Point Aviation Fuels (Automated Phase Transition Method)See page 5 for AccuStandard’s comprehensive line of Certified Freezing Point Standards.Standards of InterestAlso see Cloud Point standardsused for ASTM Method D-2500on page 5.ASTMASTM D-5986Daily Quality Control Standard(without Internal Standard)Oxygenates, Benzene, Toluene, C 8 -C 12 , Aromatics & Total Aromatics in Finished Gasolines by GC/FTIRM-GRA-QC-10ML$ 125 / 1 x 10 mLM-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mLWt.Wt.Compound Ratio CompoundRation-Hexane 12 Toluene 9n-Heptane 17 Ethylbenzene 3n-Octane 17 m-Xylene 3n-Decane 12 o-Xylene 3n-Dodecane 5 1,2,4-Trimethylbenzene 3Isooctane 12 1,2,4,5-Tetramethylbenzene 3Benzene 113 Comp. Core Mix 100Technical NoteAccuStandard formulated this quality controlstandard to meet Section 11 of ASTMD-5986-96 specifications stipulating to“analyze the quality control reference materialbefore every batch of samples. Bracket thesamples with the reference materials”.Oxygenate QC samples are available onpages 1- 2 or can be custom formulated.Originally designed forD-5986-96Standards of InterestSee page 34 for AccuStandard’sOxygenate Calibration Curve(Cat. No. M-GRO-CAL-SET)and page 46 for AccuStandard’sAromatic Calibration Curve (Cat.No. D-5769-CAL-SET-5ML).Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted byASTM Method see beginning of CatalogFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 53


Method 616062586277ASTM StandardsMemberASTMASTM D-6160Polychlorinated Biphenyls (PCBs in Waste Materials by GC)Aroclor Solutions (Individual and Kit)SAVE 20%in PAK(35 µg/mL in (35 µg/mL in (35 µg/mL inIsooctane) MeOH) Hexane) 1 x 1 mL 5 x 1 mLAroclor # Cat. No. Cat. No. Cat. No. Price Cat. No. PriceAroclor 1016 C-216S C-216S-M C-216S-H-10X $ 15 Cat. #-PAK $ 60Aroclor 1221 C-221S C-221S-M C-221S-H-10X 15 Cat. #-PAK 60Aroclor 1232 C-232S C-232S-M C-232S-H-10X 15 Cat. #-PAK 60Aroclor 1242 C-242S C-242S-M C-242S-H-10X 15 Cat. #-PAK 60Aroclor 1248 C-248S C-248S-M C-248S-H-10X 15 Cat. #-PAK 60Aroclor 1254 C-254S C-254S-M C-254S-H-10X 15 Cat. #-PAK 60Aroclor 1260 C-260S C-260S-M C-260S-H-10X 15 Cat. #-PAK 60Aroclor 1262 C-262S C-262S-M C-262S-H-10X 15 Cat. #-PAK 60Aroclor 1268 C-268S C-268S-M C-268S-H-10X 15 Cat. #-PAK 60Kit of all 9 above Z-008S Z-008S-M Z-008S-H-10X $ 78 / 9 x 1 mLOriginally designed forD-6160-98Additional Ready-to-InjectPCB Aroclor CalibrationCurves available in ourOrganic CatalogASTM D-6258Solvent Red 164 Dye Concentration in Diesel FuelsStock Solvent Red 26 StandardD-6258-CONC-5ML$ 45 / 1 x 5 mLOriginally designed forD-6258-98Solvent Red 26 @ 300 µg/mL in XyleneD-6258 Calibration CurveD-6258-CAL-SET-5ML$ 125 / set of 6 x 5 mLSet includes the following Cat. No.’sCat. No. Description UnitD-6258-BL Xylene Blank 1 x 5 mLD-6258-01 Solvent Red 26 Dye @ 3 µg/mL in Xylene 1 x 5 mLD-6258-02 Solvent Red 26 Dye @ 6 µg/mL in Xylene 1 x 5 mLD-6258-03 Solvent Red 26 Dye @ 9 µg/mL in Xylene 1 x 5 mLD-6258-04 Solvent Red 26 Dye @ 12 µg/mL in Xylene 1 x 5 mLD-6258-05 Solvent Red 26 Dye @ 15 µg/mL in Xylene 1 x 5 mLASTM D-6277Benzene in Spark - Ignition Engine Fuels using Mid Infrared SpectroscopySee page 1 for AccuStandard’s QA/QC material reference in the method.Technical NoteSolvent Red 26 is the azo dyestandard against which theconcentration of Solvent Red164 is measured. The visiblespectrum of Solvent Red 164 isvirtually identical to thespectrum of Solvent Red 26.MemberAccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.54 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 62936296MemberASTM D-6293Oxygenates & Paraffin, Olefin, Naphthene, Aromatics (O-PONA) Hydrocarbontypes in Low-Olefin Spark-Ignition Engine Fuels by GCO-PONA System Validation MixtureASTM-P-0080ASTM-P-0080-PAKWt./Wt. %Cyclopentane 1.5n-Pentane 1.5Cyclohexane 2.02,3-Dimethylbutane 2.0n-Hexane 2.01-Hexene 1.5Methylcyclohexane 3.54-Methyl-1-hexene 1.5n-Heptane 3.0cis-1,2-Dimethylcyclohexane 4.5Isooctane 4.0n-Octane 4.01,2,4-Trimethylcyclohexane 3.5n-Nonane 3.0n-Decane 3.5n-Undecane 2.0n-Dodecane 2.0$ 135 / 1 x 1 mLSAVE 26% $ 500 / 5 x 1 mL33 comps.Wt./Wt. %Benzene 2.5Toluene 2.5trans-Decahydronaphthelene 3.5n-Tetradecane 2.0Ethylbenzene 3.5o-Xylene 3.0n-Propylbenzene 3.51,2,4-Trimethylbenzene 3.01,2,3-Trimethylbenzene 2.01,2,4,5-Tetramethylbenzene 2.0Pentamethylbenzene 2.5Ethanol 5.0t-Butanol 4.0MtBE 8.0ETBE 3.0TAME 5.0O-PONA Olefin MixASTM-P-0081 $ 45 / 1 x 1 mLASTM-P-0081-PAK $ 180 / 5 x 1 mLAt stated conc. in Hexane : Heptane (1:1)5 comps.Wt./Wt. %1-Pentene 5.01-Hexene 2.01-Heptene 2.01-Octene 2.01-Nonene 3.0O-PONA Paraffin MixASTM-P-0082 $ 25 / 1 x 1 mLASTM-P-0082-PAK $ 100 / 5 x 1 mLAt stated conc. in Hexane : Heptane (1:1)2 comps.Wt./Wt. %n-Nonane 5.0n-Decane 2.0Originally designed forD-6293-98ASTMStandards of InterestFor the mandatory real world QC samplesstipulated in QA/QC section 8.6 of the methodsee pages 1-2.O-PONA Paraffin MixASTM-P-0082-R1 $ 25 / 1 x 1 mLASTM-P-0082-R1-PAK $ 100 / 5 x 1 mLAt stated conc. in Hexane : Heptane (1:1)2 comps.Wt./Wt. %n-Nonane 3.0n-Decane 3.0ASTM D-6296Total Olefins in Spark-Ignition Engine Fuels by Multidimensional GCSystem Setup & Verification StandardsD-6296-VER-SET$ 40 / 2 x 1 mLSet contains 1 ampule of each Cat. No. listed belowD-6296-VER-SET-PAK SAVE 23% $ 150 / 5 x (2 x 1 mL)5 sets containing 1 ampule of each Cat. No. listed belowOriginally designed forD-6296-98System Setup & Verification StandardsD-6296-VER1Wt. %MTBE 5%Isooctane 95%1 x 1 mL2 comps.System Setup & Verification StandardsD-6296-VER2Wt. %ETBE 5%Isooctane 95%1 x 1 mL2 comps.Calibration Standard with MTBED-6296-CAL1D-6296-CAL1-PAKWt. %Pentene 1.0Hexene 1.0Heptene 1.0Octene 1.0Nonene 1.0$ 65 / 1 x 1 mLSAVE 23% $ 250 / 5 x 1 mL10 comps.Wt. %Decene 1.0Undecane 1.0Dodecane 1.0Isooctane 87.0MTBE 5.0Calibration Standard with ETBED-6296-CAL2D-6296-CAL2-PAKWt. %Pentene 1.0Hexene 1.0Heptene 1.0Octene 1.0Nonene 1.0Decene 1.0$ 65 / 1 x 1 mLSAVE 23% $ 250 / 5 x 1 mL11 comps.Wt. %Decane 1.0Undecane 1.0Dodecane 1.0Isooctane 86.0ETBE 5.0Isooctane Blank Compensation StandardD-6296-BL$ 15 / 1 x 5 mLIsooctane (Neat)Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 55


Method 630463346352ASTM StandardsMemberASTM D-6304Determination of Water in Petroleum Products Lubricating oil, andadditives by Coulometric Karl Fischer TitrationASTMSee page 5 for AccuStandard’s comprehensive line of Certified Water Standards, forKarl Fischer Analysis.ASTM D-6334Sulfur in Gasoline by Wavelength Dispersive X-Ray FluorescenceSee Sulfur Standards Group listing in the Table of Contents for AccuStandard’s comprehensiveline of Certified Sulfur Calibration Standards.ASTM D-6352Polywax 500 ®ASTM-P-0051N-2GPolywax 500Polywax 655 ®ASTM-P-0053N-2GPolywax 655Boiling Range Distribution of Petroleum Distillates from 174 to 700ºC by GC$ 20 / 2 grams$ 20 / 2 gramsPolywax 850 ®ASTM-P-0137N-2GPolywax 850Polywax 1000 ®ASTM-P-0138N-2GPolywax 1000$ 20 / 2 grams$ 20 / 2 gramsOriginally designed forD-6352-98Standards of InterestContact AccuStandard’sTechnical Departmentregarding the availability of aQA/QC Reference Oil Sampleunder development in ASTM.Hydrocarbon WindowDefining Standard*DRH-008S-R2$ 65 / 1 x 1 mLDRH-008S-R2-PAK SAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecaneHeptadecaneOctadecanePristaneNonadecanePhytaneEicosaneHeneicosaneDocosaneTricosaneTetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosaneTriacontanen-HentriacontaneDotriacontaneTritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontane* Can be shipped by Air and SeaCalibration MixDRH-002NDRH-002N-10XWt. %n-Hexane 6n-Heptane 6n-Octane 8n-Nonane 8n-Decane 12n-Undecane 12n-Dodecane 12n-Tetradecane 12n-Hexadecane 10Column Test Mixture$ 10 / 100 mg$ 40 / 1 gm17 comps.Wt. %n-Octadecane 5n-Eicosane 2n-Tetracosane 2n-Octacosane 1n-Dotriacontane 1n-Hexatriacontane 1n-Tetracontane 1n-Tetratetracontane 1ASTM-D2887$ 10 / 1 x 1 mL1% v/v in n-Octane 2 comps.n-Hexadecanen-OctadecaneASTM D-6378Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, &Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)See pages 29 & 32 for AccuStandard’s comprehensive line of Vapor Pressure Standards &Instrument Quality Control Samples.56 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ASTM StandardsMethod 6379IP 39164176428MemberASTM D-6379 Aromatic Hydrocarbon Types in Aviation Fuels & Petroleum Distillates -HPLC method with Refractive IndexOriginally designed forD-6379-99System Resolution StandardD-6379-SRS$ 40 / 1 x 1 mLD-6379-SRS-PAK SAVE 30% $ 140 / 5 x 1 mLAt stated Conc. in n-Heptane 3 comps.D-6379 Calibration CurveD-6379-SET$ 100 / 4 x 1 mLD-6379-SET-PAK SAVE 30% $ 350 / 5 x (4 x 1 mL)At stated Conc. in n-HeptaneASTMCyclohexaneo-Xylene1-Methyl naphthalene10 mg/mL0.5 mg/mL0.05 mg/mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4(mg/mL) (mg/mL) (mg/mL) (mg/mL)Cyclohexane 5 2 0.5 0.1o-Xylene 15 5 1.0 0.11-Methyl naphthalene 5 1.0 0.2 0.05D-6591 Aromatic Hydrocarbon Types in Middle Distillates -IP 391 HPLC method with Refractive Index DetectionSystem Performance StandardASTM-P-0135$ 75 / 1 x 5 mLASTM-P-0135-PAK SAVE 20% $ 300 / 5 x 5 mLAt stated Conc. in n-Heptane 4 comps.Cyclohexaneo-XyleneDibenzothiophene9-Methylanthracene10 mg/mL5.0 mg/mL0.5 mg/mL0.5 mg/mLIP 391-95 Calibration CurveASTM-P-0136-SETAt stated Conc. in n-Heptane$ 145 / 4 x 1 mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4(mg/mL) (mg/mL) (mg/mL) (mg/mL)Cyclohexane 50 20 5 1o-Xylene 40 10 2.5 0.51-Methyl naphthalene 40 10 2.5 0.2Phenanthrene 4 2 0.5 0.1ASTM D-6417 Estimation of Engine Oil Volatility by Capillary GCSee page 15 for Alkane and Polywax standards suitable for D-6417.ASTM D-6428 Sulfur by Combustion and Electrochemical DetectionNEWStandards of InterestSee ASTM Methods D-3710,D-5307, D-5442, D-6352 foradditional calibrationstandards for hydrocarbonanalysis.D-6428-R1-4-SETD-6428-R1-SETSulfur as Dibenzothiophene$ 300 / 7 x 4 oz$ 65 / 7 x 1 mLD-6428-R1-4-SETD-6428-R1-SETDescription Cat. No. Unit Cat. No. UnitSulfur Blank D-6428-BL-4 4 oz D-6428-BL 1 mLSulfur @ 0.1 µg/g D-6428-0.1X-4 4 oz D-6428-0.1X 1 mLSulfur @ 0.5 µg/g D-6428-0.5X-4 4 oz D-6428-0.5X 1 mLSulfur @ 1.0 µg/g D-6428-1X-4 4 oz D-6428-1X 1 mLSulfur @ 2.5 µg/g D-6428-2.5X-4 4 oz D-6428-2.5X 1 mLSulfur @ 5.0 µg/g D-6428-5X-4 4 oz D-6428-5X 1 mLSulfur @ 10 µg/g D-6428-10X-4 4 oz D-6428-10X 1 mLD-6428-R2-4-SETD-6428-R2-SETSulfur as Dibenzothiophene$ 275 / 6 x 4 oz$ 65 / 6 x 1 mLD-6428-R2-4-SETD-6428-R2-SETDescription Cat. No. Unit Cat. No. UnitSulfur Blank D-6428-BL-4 4 oz D-6428-BL 1 mLSulfur @ 10 µg/g D-6428-10X-4 4 oz D-6428-10X 1 mLSulfur @ 25 µg/g D-6428-25X-4 4 oz D-6428-25X 1 mLSulfur @ 50 µg/g D-6428-50X-4 4 oz D-6428-50X 1 mLSulfur @ 75 µg/g D-6428-75X-4 4 oz D-6428-75X 1 mLSulfur @ 100 µg/g D-6428-100X-4 4 oz D-6428-100X 1 mLFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 57


Method 644364816550ASTM StandardsMemberASTMASTM D-6443Ca, Cl, Cu, Mg, P, S, Zn in Unused Lubricating Oils & Additives byWavelength Dispersive X-ray Fluorescence & SpectrometryLubricating Oil, Elements, WLXRF ASTM Method (Nominal Value) Wt.% listed belowASTM-P-0117-SET$ 2100 / 10 x 100 mLCa Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0117-01 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0117-02 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0117-03 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0117-04 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0117-05 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0117-06 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0117-07 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0117-08 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0117-09 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0117-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000Originally designed forD-6443-99Standards of InterestSee the Wear Metal Grouplisting in the Table of Contentsfor AccuStandard’scomprehensive line of CertifiedOil Dissolved Wear MetalCalibration Standards.WEAR METALSASTM D-6445ASTM D-6481Sulfur in Gasoline by ED - XRFSee the Sulfur Standards Group listing in the Table of Contents for AccuStandard’scomprehensive line of Certified Sulfur Calibration Standards.P, S, Ca and Zn in Lube Oils by ED-XRFLubricating Oil, Elements, EDXRF ASTM Method(Nominal Value) Wt.% listed belowASTM-P-0114-SET$ 1900 / 17 x 100 mLCa P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0114-01 0.005 0.005 0.050 0.050ASTM-P-0114-02 0.600 0.000 0.000 0.000ASTM-P-0114-03 0.000 0.300 0.000 0.000ASTM-P-0114-04 1.000 0.000 1.000 0.000ASTM-P-0114-05 0.000 0.000 0.000 0.300ASTM-P-0114-06 0.005 0.250 0.800 0.300ASTM-P-0114-07 0.500 0.150 0.500 0.150ASTM-P-0114-08 0.010 0.200 0.100 0.250ASTM-P-0114-09 0.050 0.010 0.400 0.075ASTM-P-0114-10 0.100 0.150 0.200 0.200ASTM-P-0114-11 0.200 0.200 0.800 0.100ASTM-P-0114-12 0.400 0.005 0.800 0.300ASTM-P-0114-13 0.600 0.100 0.500 0.050ASTM-P-0114-14 0.800 0.010 0.050 0.100ASTM-P-0114-15 1.000 0.300 1.000 0.150ASTM-P-0114-16 0.400 0.050 0.600 0.250ASTM-P-0114-17 0.000 0.000 0.000 0.000Originally designed forD-6481-99ASTM D-6550Wt. %1-Nonene 2.5Cyclohexene 51-Hexene 51-Octene 51-Decene 52-Methyl-1,3-butadiene 54-Methyl-1-pentene 51,5-Hexadiene 3Olefin Content of Gasolines by SFCStock Olefin Calibration StandardD-6550-CONCD-6550-CONC-5MLAt stated Conc. by Wt. %$ 80 / 1 x 1 mL$ 350 / 1 x 5 mL15 comps.Wt. %3-Methyl-1,3-pentadiene 22-Methyl-1-butene 252-Methyl-2-pentene 101-Heptene 102-Methyl-1-octene 2.52-Methyl-1-heptene 55-Methyl-1-hexene 10Originally designed forD-6550-00Technical NoteAccuStandard worked inconjunction with the D-02technical committee and ShellOil to develop this stock OlefinStandard proven useful increating the required calibrationcurve.Standards of InterestSee page 2 for consensus valueQA/QC material available forthis method.58 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Organometallic Standardsfor AA, ICP, DCP & XRF AnalysisThese Standards were formulated for the analysis of metals in oils and other organic matrices. These Standardsand curves provide a convenient way to analyze for metals (wear metals, additives and contaminants) inlubricating oils, gasolines, residual oils, crude oils, turbine fuels and environmental samples.All standards undergo rigorous quality assurance checks. Major constituents in the final Standard are typicallyanalyzed by both plasma emission and rotrode techniques.Organometallic Standards listed on this page may contain sulfur which can be introduced by possible sulfonatestarting materials used to formulate the actual organometallic standard.AccuStandard has developed a New Premium Organometallic line for those clients preferring to haveorganometallic standards with


Wear MetalsOrganometallic StandardsPremium Sulfur-FreeThese highly concentrated stabilized solutions can be used for customer specific formulations of additive elements in lubricating oils, iron, nickel and vanadiumin residual oil, and wear metals in oils. These organometallic solutions can also be used to prepare single element or multi-element standards for plasmaemission (ICP or DCP), rotating disk (rotrode), or atomic absorption spectroscopy (AA). The starting materials for the standards are PURE REAGENTS andhave been certified against NIST SRM’s whenever available. THEY DO NOT CONTAIN PHOSPHORUS OR SULFUR. TRACE IMPURITIES AREDOCUMENTED ON THE CERTIFICATE OF ANALYSIS.Highly Concentrated Liquid Organo-Metallic StandardsStabilizedSulfur/Phosphorous free (< 1 ppm)Ready for UseOrganometallic Single-Element ConcentratesElement Conc. (Wt. %) Cat. No. Price Cat. No. Price25 grams 50 gramsAluminum 3 WM-NMS-01-30X-25G $ 150 WM-NMS-01-30X-50G $ 210Barium 12.5 WM-NMS-04-125X-25G 540 WM-NMS-04-125X-50G 780Boron 2.5 WM-NMS-07-25X-25G 130 WM-NMS-07-25X-50G 180Cadmium 10 WM-NMS-08-100X-25G 510 WM-NMS-08-100X-50G 710Calcium 5 WM-NMS-09-50X-25G 250 WM-NMS-09-50X-50G 355Chromium 2.5 WM-NMS-13-25X-25G 145 WM-NMS-13-25X-50G 200Cobalt 7.5 WM-NMS-14-75X-25G 330 WM-NMS-14-75X-50G 450Copper 6 WM-NMS-15-60X-25G 250 WM-NMS-15-60X-50G 355Iron 4 WM-NMS-27-40X-25G 220 WM-NMS-27-40X-50G 300Lead 20 WM-NMS-29-200X-25G 900 WM-NMS-29-200X-50G 1260Magnesium 3 WM-NMS-32-30X-25G 180 WM-NMS-32-30X-50G 252Manganese 7.5 WM-NMS-33-75X-25G 330 WM-NMS-33-75X-50G 450Molybdenum 5 WM-NMS-35-50X-25G 215 WM-NMS-35-50X-50G 294Nickel 5 WM-NMS-37-50X-25G 250 WM-NMS-37-50X-50G 350Phosphorus 5 WM-NMS-41-50X-25G 250 WM-NMS-41-50X-50G 350Praseodymium 3 WM-NMS-44-30X-25G 175 WM-NMS-44-30X-50G 240Selenium 3.5 WM-NMS-51-35X-25G 200 WM-NMS-51-35X-50G 270Strontium 10 WM-NMS-55-100X-25G 510 WM-NMS-55-100X-50G 710Thallium 5 WM-NMS-60-50X-25G 265 WM-NMS-60-50X-50G 360Titanium 5 WM-NMS-64-50X-25G 215 WM-NMS-64-50X-50G 295Vanadium 2 WM-NMS-67-20X-25G 115 WM-NMS-67-20X-50G 150Zinc 6 WM-NMS-70-60X-25G 270 WM-NMS-70-60X-50G 380Zirconium 5 WM-NMS-71-50X-25G 250 WM-NMS-71-50X-50G 355PremiumSulfur-FreeSulfur belowdetection limitsORGANOMETALLICCOrganometallic Single-Element Stock StandardsSulfur free Organometallic Sulfur free OrganometallicElement @ 1000 µg/g Price @ 5000 µg/g PriceCat. No. 50 mL Cat. No. 50 mLAluminum WM-NMS-01 $ 50 WM-NMS-01-5X $ 90Antimony WM-NMS-02 50 WM-NMS-02-5X 90Barium WM-NMS-04 50 WM-NMS-04-5X 90Cadmium WM-NMS-08 50 WM-NMS-08-5X 90Calcium WM-NMS-09 50 WM-NMS-09-5X 90Chromium WM-NMS-13 50 WM-NMS-13-5X 90Cobalt WM-NMS-14 75 WM-NMS-14-5X 110Copper WM-NMS-15 75 WM-NMS-15-5X 110Iron WM-NMS-27 50 WM-NMS-27-5X 90Lead WM-NMS-29 50 WM-NMS-29-5X 90Magnesium WM-NMS-32 50 WM-NMS-32-5X 90Manganese WM-NMS-33 50 WM-NMS-33-5X 90Molybdenum WM-NMS-35 50 WM-NMS-35-5X 90Nickel WM-NMS-37 50 WM-NMS-37-5X 90Phosphorous WM-NMS-41 50 WM-NMS-41-5X 90Potassium WM-NMS-43 50 WM-NMS-43-5X 90Selenium WM-NMS-51 60 WM-NMS-51-5X 100Silicon WM-NMS-52 75 WM-NMS-52-5X 110Sodium WM-NMS-54 50 WM-NMS-54-5X 90Strontium WM-NMS-55 50 WM-NMS-55-5X 90Thallium WM-NMS-60 60 WM-NMS-60-5X 100Tin WM-NMS-63 50 WM-NMS-63-5X 90Titanium WM-NMS-64 50 WM-NMS-64-5X 90Vanadium WM-NMS-67 50 WM-NMS-67-5X 90Yttrium WM-NMS-68 60 WM-NMS-68-5X 100Zinc WM-NMS-70 50 WM-NMS-70-5X 90Zirconium WM-NMS-71 50 WM-NMS-71-5X 90Technical NoteThese standards are sulfur free (belowdetection limits) organometallic standardsfor X-ray Fluorescence (XRF), plasmaemission (ICP or DCP), rotating disk(rotrode), or atomic absorption (AA). Theyare stabilized for blending together withother Analytes to prepare multi-elementstandards.Stabilization SolutionsThe solutions were specificallydesigned for chelating and solubilizingthe organometallic line of solids andsolutions for single and multi-elementstandards.Stabilizer Solutions AASTM-P-0122-0.5$ 80 / 50 mLASTM-P-0122-1$ 120 / 100 mLStabilizer Solutions BASTM-P-0123-0.5$ 80 / 50 mLASTM-P-0123-1$ 120 / 100 mL(use in conjunction with stabilizer solution A)60 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Organometallic StandardsPremium Sulfur-FreeWear MetalsWear Metals Multi-Element11 Wear Metal Multi-Element StandardContaining No Metallic SulfonatesConc. Cat. No. Price(µg/g)10 WM-11-NMS-1X-1 $ 13030 WM-11-NMS-3X-1 13050 WM-11-NMS-5X-1 130100 WM-11-NMS-10X-1 140300 WM-11-NMS-30X-1 165500 WM-11-NMS-50X-1 245900 WM-11-NMS-90X-1 325WM-11-NMS-SET-1 $ 1100set of above 7 x 100 mLEach Wear Metal Standard contains11 elements in hydrocarbon oil atthe stated concentration12 Wear Metal Multi-Element StandardContaining No Metallic SulfonatesConc. Cat. No. Price(µg/g)10 WM-12-NMS-1X-1 $ 13530 WM-12-NMS-3X-1 13550 WM-12-NMS-5X-1 135100 WM-12-NMS-10X-1 145300 WM-12-NMS-30X-1 170500 WM-12-NMS-50X-1 250WM-12-NMS-SET-1 $ 850set of above 6 x 100 mLEach Wear Metal Standard contains12 elements in hydrocarbon oil atthe stated concentrationPremiumSulfur-FreeSulfur belowdetection limitsAl (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Na (Sodium)Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)Ag (Silver)Al (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Na (Sodium)Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)20 Wear Metal Multi-Element StandardContaining No Metallic SulfonatesConc. Cat. No. Price(µg/g)10 WM-20-NMS-1X-1 $ 15030 WM-20-NMS-3X-1 15050 WM-20-NMS-5X-1 150100 WM-20-NMS-10X-1 170300 WM-20-NMS-30X-1 230500 WM-20-NMS-50X-1 350900 WM-20-NMS-90X-1 500Each Wear Metal Standard contains20 elements in hydrocarbon oil atthe stated concentrationAl (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)WM-20-NMS-SET-1 $ 1450set of above 7 x 100 mLMo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)21 Wear Metal Multi-Element StandardContaining No Metallic SulfonatesConc. Cat. No. Price(µg/g)10 WM-21-NMS-1X-1 $ 16030 WM-21-NMS-3X-1 16050 WM-21-NMS-5X-1 160100 WM-21-NMS-10X-1 180300 WM-21-NMS-30X-1 240500 WM-21-NMS-50X-1 350WM-21-NMS-SET-1 $ 1050set of above 6 x 100 mLEach Wear Metal Standard contains21 elements in hydrocarbon oil atthe stated concentrationAg (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)ORGANOMETALLICCTest toLow ppbSulfurSee Pages 6-11Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com61


Wear MetalsOrganometallic Standardsfor AA, ICP, DCP & XRF AnalysisSulfur & Metals in OilSulfur and Metals in Mineral OilASTM-P-0100-SET$ 1650 / 12 x 100 mLSulfur Nickel VanadiumCat. No. Conc. Conc. Conc. Price(Wt. %) (µg/g) (µg/g) 100 mLASTM-P-0100-01 0.00 0 0 $ 200ASTM-P-0100-02 0.50 10 500 200ASTM-P-0100-03 1.00 100 25 200ASTM-P-0100-04 1.50 80 250 200ASTM-P-0100-05 2.00 40 100 200ASTM-P-0100-06 2.50 5 400 200ASTM-P-0100-07 3.00 60 300 200ASTM-P-0100-08 3.50 0 200 200ASTM-P-0100-09 4.00 100 0 200ASTM-P-0100-10 4.50 50 250 200ASTM-P-0100-11 5.00 20 500 200ASTM-P-0100-12 5.50 100 50 200Sulfur and Metals in Mineral OilASTM-P-0102-SET$ 1850 / 12 x 100 mLDesigned forASTM D-5708-95aSulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price(Wt. %) (µg/g) (µg/g) (µg/g) 100 mLTechnical NoteConcentration for the sets on pages 62-65 are targets. Actual production lots may vary.Sulfur and Metals in Residual Fuel OilASTM-P-0101-SET$ 1800 / 12 x 100 mLSulfur Nickel VanadiumCat. No. Conc. Conc. Conc. Price(Wt. %) (µg/g) (µg/g) 100 mLASTM-P-0101-01 0.00 0 0 $ 200ASTM-P-0101-02 0.50 10 500 200ASTM-P-0101-03 1.00 100 25 200ASTM-P-0101-04 1.50 80 250 200ASTM-P-0101-05 2.00 40 100 200ASTM-P-0101-06 2.50 5 400 200ASTM-P-0101-07 3.00 60 300 200ASTM-P-0101-08 3.50 0 200 200ASTM-P-0101-09 4.00 100 0 200ASTM-P-0101-10 4.50 50 250 200ASTM-P-0101-11 5.00 20 500 200ASTM-P-0101-12 5.50 100 50 200Sulfur and Metals in Residual Fuel OilASTM-P-0103-SET$ 2100 / 12 x 100 mLDesigned forASTM D-5708-95aSulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price(Wt. %) (µg/g) (µg/g) (µg/g) 100 mLORGANOMETALLICCASTM-P-0102-01 0.00 0 0 0 $ 200ASTM-P-0102-02 0.50 300 10 500 200ASTM-P-0102-03 1.00 500 100 25 200ASTM-P-0102-04 ----- 100 80 250 200ASTM-P-0102-05 2.00 200 40 100 200ASTM-P-0102-06 2.50 400 5 400 200ASTM-P-0102-07 3.00 0 60 300 200ASTM-P-0102-08 3.50 500 0 200 200ASTM-P-0102-09 ----- 100 100 0 200ASTM-P-0102-10 4.50 300 50 250 200ASTM-P-0102-11 5.00 200 20 500 200ASTM-P-0102-12 5.50 50 100 50 200ISO/CD 14597Vanadium and Nickel Standards with Manganese Internal Standard for ISO/CD 14597Vanadium Standards - Low Range for ISO/CD14597 with 0.05% Manganese Internal Standardin Xylene-Mineral OilASTM-P-0104-SET $ 1050 / 9 x 100 mLVanadium PriceCat. No. Conc. (Wt.%) 100 mLASTM-P-0104-01 0.0005 $ 150ASTM-P-0104-02 0.0025 150ASTM-P-0104-03 0.0050 150ASTM-P-0104-04 0.0075 150ASTM-P-0104-05 0.0100 150ASTM-P-0104-06 0.0125 150ASTM-P-0104-07 0.0150 150ASTM-P-0104-08 0.0175 150ASTM-P-0104-09 0.0200 150Vanadium Standards - High Range for ISO/CD14597 with 0.05% Manganese Internal Standardin Xylene-Mineral OilASTM-P-0105-SET $ 780 / 7 x 100 mLVanadium PriceCat. No. Conc. (Wt.%) 100 mLASTM-P-0105-01 0.0000 $ 135ASTM-P-0105-02 0.0300 135ASTM-P-0105-03 0.0400 135ASTM-P-0105-04 0.0500 135ASTM-P-0105-05 0.0600 135ASTM-P-0105-06 0.0800 135ASTM-P-0105-07 0.1000 135ASTM-P-0103-01 0.00 0 0 0 $ 200ASTM-P-0103-02 0.50 300 10 500 200ASTM-P-0103-03 1.00 500 100 25 200ASTM-P-0103-04 ----- 100 80 250 200ASTM-P-0103-05 2.00 200 40 100 200ASTM-P-0103-06 2.50 400 5 400 200ASTM-P-0103-07 3.00 0 60 300 200ASTM-P-0103-08 3.50 500 0 200 200ASTM-P-0103-09 ----- 100 100 0 200ASTM-P-0103-10 4.50 300 50 250 200ASTM-P-0103-11 5.00 200 20 500 200ASTM-P-0103-12 5.50 50 100 50 200Nickel Standards for ISO/CD 14597 with 0.05%Manganese Internal Standard in Xylene-Mineral OilASTM-P-0106-SET $ 780 / 7 x 100 mLNickel PriceCat. No. Conc. (Wt.%) 100 mLASTM-P-0106-01 0.0000 $ 135ASTM-P-0106-02 0.0005 135ASTM-P-0106-03 0.0010 135ASTM-P-0106-04 0.0025 135ASTM-P-0106-05 0.0050 135ASTM-P-0106-06 0.0075 135ASTM-P-0106-07 0.0100 135Internal StandardASTM-P-0107-5$ 235 / 500 mLManganese @ 0.05 Wt. % in Xylene-Mineral Oil62 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Organometallic Standardsfor AA, ICP, DCP & XRF AnalysisWear MetalsLubricating Oil StandardsDesigned forASTM D-6481-99Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0108-SET$ 1900 / 17 x 100 mLCa P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0108-01 0.600 0.005 0.175 0.060ASTM-P-0108-02 0.500 0.200 0.050 0.080ASTM-P-0108-03 0.400 0.150 0.300 0.180ASTM-P-0108-04 0.260 0.250 0.150 0.120ASTM-P-0108-05 0.005 0.005 0.450 0.070ASTM-P-0108-06 0.400 0.025 0.350 0.100ASTM-P-0108-07 0.300 0.060 0.250 0.120ASTM-P-0108-08 0.200 0.100 0.450 0.100ASTM-P-0108-09 0.060 0.080 0.300 0.130ASTM-P-0108-10 0.060 0.050 0.200 0.050ASTM-P-0108-11 0.050 0.120 0.100 0.075ASTM-P-0108-12 0.025 0.150 0.200 0.130ASTM-P-0108-13 0.005 0.200 0.400 0.150ASTM-P-0108-14 0.170 0.250 0.550 0.110ASTM-P-0108-15 0.100 0.100 0.200 0.200ASTM-P-0108-16 0.010 0.010 0.600 0.250ASTM-P-0108-17 0.000 0.000 0.000 0.000Designed forASTM D-4927-96Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0110-SET$ 2300 / 17 x 100 mLBa Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0109-SET$ 1600 / 17 x 100 mLStandard Ca Cl P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0109-01 0.600 0.100 0.005 0.175 0.060ASTM-P-0109-02 0.500 0.000 0.200 0.050 0.080ASTM-P-0109-03 0.400 0.010 0.150 0.300 0.180ASTM-P-0109-04 0.260 0.500 0.250 0.150 0.120ASTM-P-0109-05 0.005 1.000 0.005 0.450 0.070ASTM-P-0109-06 0.400 0.400 0.025 0.350 0.100ASTM-P-0109-07 0.300 0.100 0.060 0.250 0.120ASTM-P-0109-08 0.200 0.010 0.100 0.450 0.100ASTM-P-0109-09 0.060 0.050 0.080 0.300 0.130ASTM-P-0109-10 0.060 0.200 0.050 0.200 0.050ASTM-P-0109-11 0.050 0.500 0.120 0.100 0.075ASTM-P-0109-12 0.025 0.800 0.150 0.200 0.130ASTM-P-0109-13 0.005 1.000 0.200 0.400 0.150ASTM-P-0109-14 0.170 0.600 0.250 0.550 0.110ASTM-P-0109-15 0.100 0.200 0.100 0.200 0.200ASTM-P-0109-16 0.010 0.400 0.010 0.600 0.250ASTM-P-0109-17 0.000 0.000 0.000 0.000 0.000Designed forASTM D-4927-96Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0111-SET$ 2800 / 17 x 100 mLBa Ca Cl P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0111-01 0.100 0.600 0.100 0.005 0.175 0.060ASTM-P-0111-02 0.175 0.500 0.000 0.200 0.050 0.080ASTM-P-0111-03 0.000 0.400 0.010 0.150 0.300 0.180ASTM-P-0111-04 0.025 0.260 0.500 0.250 0.150 0.120ASTM-P-0111-05 0.150 0.005 1.000 0.005 0.450 0.070ASTM-P-0111-06 0.000 0.400 0.400 0.025 0.350 0.100ASTM-P-0111-07 0.200 0.300 0.100 0.060 0.250 0.120ASTM-P-0111-08 0.000 0.200 0.010 0.100 0.450 0.100ASTM-P-0111-09 0.100 0.060 0.050 0.080 0.300 0.130ASTM-P-0111-10 0.050 0.060 0.200 0.050 0.200 0.050ASTM-P-0111-11 0.075 0.050 0.500 0.120 0.100 0.075ASTM-P-0111-12 0.010 0.025 0.800 0.150 0.200 0.130ASTM-P-0111-13 0.005 0.005 1.000 0.200 0.400 0.150ASTM-P-0111-14 0.000 0.170 0.600 0.250 0.550 0.110ASTM-P-0111-15 0.000 0.100 0.200 0.100 0.200 0.200ASTM-P-0111-16 0.005 0.010 0.400 0.010 0.600 0.250ASTM-P-0111-17 0.000 0.000 0.000 0.000 0.000 0.000WEAR METALSORGANOMETALLICCLubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0112-SET$ 2300 / 16 x 100 mLCa Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0112-01 0.600 0.100 0.005 0.175 0.060ASTM-P-0112-02 0.500 0.150 0.200 0.050 0.080ASTM-P-0112-03 0.400 0.350 0.150 0.300 0.180ASTM-P-0112-04 0.260 0.225 0.250 0.150 0.120ASTM-P-0112-05 0.005 0.450 0.005 0.450 0.070ASTM-P-0112-06 0.400 0.500 0.025 0.350 0.100ASTM-P-0112-07 0.300 0.325 0.060 0.250 0.120ASTM-P-0112-08 0.200 0.250 0.100 0.450 0.100ASTM-P-0112-09 0.060 0.100 0.080 0.300 0.130ASTM-P-0112-10 0.060 0.400 0.050 0.200 0.050ASTM-P-0112-11 0.050 0.300 0.120 0.100 0.075ASTM-P-0112-12 0.025 0.200 0.150 0.200 0.130ASTM-P-0112-13 0.005 0.375 0.200 0.400 0.150ASTM-P-0112-14 0.170 0.175 0.250 0.550 0.110ASTM-P-0112-15 0.100 0.425 0.100 0.200 0.200ASTM-P-0112-16 0.010 0.275 0.010 0.600 0.250ASTM-P-0112-17 0.000 0.000 0.000 0.000 0.000Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0113-SET$ 2850 / 17 x 100 mLDesigned for ASTMD-4628-97 & D-4927-96Ba Ca Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com63


Wear MetalsOrganometallic Standards forAA, ICP, DCP & XRF AnalysisWEAR METALSORGANOMETALLICCLubricating Oil StandardsContinuedLubricating Oil, Elements, EDXRF ASTM MethodWt.% (Nominal Value) listed belowASTM-P-0114-SET$ 1900 / 17 x 100 mLCa P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0114-01 0.005 0.005 0.050 0.050ASTM-P-0114-02 0.600 0.000 0.000 0.000ASTM-P-0114-03 0.000 0.300 0.000 0.000ASTM-P-0114-04 1.000 0.000 1.000 0.000ASTM-P-0114-05 0.000 0.000 0.000 0.300ASTM-P-0114-06 0.005 0.250 0.800 0.300ASTM-P-0114-07 0.500 0.150 0.500 0.150ASTM-P-0114-08 0.010 0.200 0.100 0.250ASTM-P-0114-09 0.050 0.010 0.400 0.075ASTM-P-0114-10 0.100 0.150 0.200 0.200ASTM-P-0114-11 0.200 0.200 0.800 0.100ASTM-P-0114-12 0.400 0.005 0.800 0.300ASTM-P-0114-13 0.600 0.100 0.500 0.050ASTM-P-0114-14 0.800 0.010 0.050 0.100ASTM-P-0114-15 1.000 0.300 1.000 0.150ASTM-P-0114-16 0.400 0.050 0.600 0.250ASTM-P-0114-17 0.000 0.000 0.000 0.000Lubricating Oil, Additives Wt.% (Nominal Value) listed belowASTM-P-0116-SET$ 2450 / 11 x 100 mLCa P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0116-01 0.500 1.000 0.500 0.500ASTM-P-0116-02 3.000 1.000 3.000 2.000ASTM-P-0116-03 2.000 1.250 1.000 1.500ASTM-P-0116-04 5.000 1.500 0.500 1.200ASTM-P-0116-05 4.000 0.500 1.500 0.750ASTM-P-0116-06 2.500 0.750 4.000 1.000ASTM-P-0116-07 4.000 0.500 2.000 1.250ASTM-P-0116-08 0.500 2.000 5.000 1.000ASTM-P-0116-09 1.000 0.750 2.000 1.500ASTM-P-0116-10 2.500 1.200 3.000 0.500ASTM-P-0116-11 0.000 0.000 0.000 0.000Designed forASTM D-6481-99Lubricating Oil, Elements, WLXRF ASTM Method Wt.% (Nominal Value) listed belowASTM-P-0117-SET$ 2100 / 10 x 100 mLCa Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0117-01 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0117-02 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0117-03 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0117-04 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0117-05 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0117-06 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0117-07 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0117-08 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0117-09 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0117-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0115-SET$ 2300 / 17 x 100 mLCa P S Zn MgCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0115-01 0.005 0.005 0.050 0.050 0.100ASTM-P-0115-02 0.600 0.000 0.000 0.000 0.150ASTM-P-0115-03 0.000 0.300 0.000 0.000 0.350ASTM-P-0115-04 1.000 0.000 1.000 0.000 .0225ASTM-P-0115-05 0.000 0.000 0.000 0.300 0.450ASTM-P-0115-06 0.005 0.250 0.800 0.300 0.500ASTM-P-0115-07 0.500 0.150 0.500 0.150 0.325ASTM-P-0115-08 0.010 0.200 0.100 0.250 0.250ASTM-P-0115-09 0.050 0.010 0.400 0.075 0.050ASTM-P-0115-10 0.100 0.150 0.200 0.200 0.400ASTM-P-0115-11 0.200 0.200 0.800 0.100 0.300ASTM-P-0115-12 0.400 0.005 0.800 0.300 0.200ASTM-P-0115-13 0.600 0.100 0.500 0.050 0.375ASTM-P-0115-14 0.800 0.010 0.050 0.100 0.175ASTM-P-0115-15 1.000 0.300 1.000 .0150 0.425ASTM-P-0115-16 0.400 0.050 0.600 0.250 0.275ASTM-P-0115-17 0.000 0.000 0.000 0.000 0.000Designed forASTM D-6443-99Lubricating Oil, Elements, WLXRF ASTM Method Wt.% (Nominal Value) listed belowASTM-P-0118-SET$ 2400 / 10 x 100 mLBa Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0118-01 0.020 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0118-02 0.250 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0118-03 0.020 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0118-04 0.250 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0118-05 0.020 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0118-06 0.250 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0118-07 0.020 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0118-08 0.250 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0118-09 0.130 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0118-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000Designed for ASTMD-4628-97, D-4927-96D-4951-96, D-6443-9964 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Organometallic Standards forAA, ICP, DCP & XRF AnalysisWear MetalsLubricating Oil StandardsContinuedLubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0119-SET$ 2900 / 22 x 100 mLCa Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0119-01 0.300 0.080 0.030 0.060 0.060 0.275 0.060ASTM-P-0119-02 0.250 0.100 0.000 0.010 0.150 0.000 0.150ASTM-P-0119-03 0.500 0.000 0.035 0.160 0.150 0.000 0.020ASTM-P-0119-04 0.350 0.010 0.000 0.120 0.080 0.200 0.000ASTM-P-0119-05 0.110 0.000 0.015 0.100 0.100 0.300 0.050ASTM-P-0119-06 0.200 0.100 0.000 0.200 0.050 0.250 0.150ASTM-P-0119-07 0.000 0.050 0.025 0.000 0.000 0.450 0.020ASTM-P-0119-08 0.150 0.030 0.000 0.100 0.030 0.400 0.040ASTM-P-0119-09 0.250 0.150 0.010 0.160 0.000 0.350 0.080ASTM-P-0119-10 0.110 0.150 0.040 0.005 0.030 0.750 0.150ASTM-P-0119-11 0.260 0.050 0.000 0.000 0.000 0.750 0.000ASTM-P-0119-12 0.200 0.000 0.005 0.140 0.080 0.500 0.080ASTM-P-0119-13 0.000 0.000 0.005 0.020 0.020 0.200 0.020ASTM-P-0119-14 0.070 0.150 0.020 0.080 0.140 0.650 0.150ASTM-P-0119-15 0.050 0.000 0.000 0.000 0.150 0.000 0.000ASTM-P-0119-16 0.400 0.000 0.001 0.080 0.000 0.500 0.020ASTM-P-0119-17 0.180 0.020 0.020 0.000 0.020 0.600 0.060ASTM-P-0119-18 0.400 0.010 0.001 0.010 0.020 0.000 0.000ASTM-P-0119-19 0.010 0.020 0.040 0.010 0.020 0.200 0.100ASTM-P-0119-20 0.050 0.005 0.050 0.000 0.008 0.000 0.120ASTM-P-0119-21 0.200 0.050 0.020 0.080 0.050 0.275 0.050ASTM-P-0119-22 0.000 0.000 0.000 0.000 0.000 0.000 0.000Designed for ASTMD-4628-97, D-4927-96D-4951-96, D-6443-99Technical NoteConcentration for the sets on pages62-65 are targets. Actual productionlots may vary.Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0120-SET$ 3100 / 23 x 100 mLBa Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0120-01 0.100 0.300 0.080 0.030 0.060 0.060 0.275 0.060ASTM-P-0120-02 0.175 0.250 0.100 0.000 0.010 0.150 0.000 0.150ASTM-P-0120-03 0.040 0.500 0.000 0.035 0.160 0.150 0.000 0.020ASTM-P-0120-04 0.020 0.350 0.010 0.000 0.120 0.080 0.200 0.000ASTM-P-0120-05 0.150 0.110 0.000 0.015 0.100 0.100 0.300 0.050ASTM-P-0120-06 0.000 0.200 0.100 0.000 0.200 0.050 0.250 0.150ASTM-P-0120-07 0.200 0.000 0.050 0.025 0.000 0.000 0.450 0.020ASTM-P-0120-08 0.000 0.150 0.030 0.000 0.100 0.030 0.400 0.040ASTM-P-0120-09 0.000 0.250 0.150 0.010 0.160 0.000 0.350 0.080ASTM-P-0120-10 0.000 0.110 0.150 0.040 0.005 0.030 0.750 0.150ASTM-P-0120-11 0.100 0.260 0.050 0.000 0.000 0.000 0.750 0.000ASTM-P-0120-12 0.050 0.200 0.000 0.005 0.140 0.080 0.500 0.080ASTM-P-0120-13 0.000 0.000 0.000 0.005 0.020 0.020 0.200 0.020ASTM-P-0120-14 0.080 0.070 0.150 0.020 0.080 0.140 0.650 0.150ASTM-P-0120-15 0.010 0.050 0.000 0.000 0.000 0.150 0.000 0.000ASTM-P-0120-16 0.000 0.400 0.000 0.001 0.080 0.000 0.500 0.020ASTM-P-0120-17 0.000 0.180 0.020 0.020 0.000 0.020 0.600 0.060ASTM-P-0120-18 0.000 0.400 0.010 0.001 0.010 0.020 0.000 0.000ASTM-P-0120-19 0.150 0.010 0.020 0.040 0.010 0.020 0.200 0.100ASTM-P-0120-20 0.005 0.050 0.005 0.050 0.000 0.008 0.000 0.120ASTM-P-0120-21 0.100 0.200 0.050 0.020 0.080 0.050 0.275 0.050ASTM-P-0120-22 0.120 0.200 0.000 0.000 0.000 0.000 0.750 0.000ASTM-P-0120-23 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000ORGANOMETALLICCMetal Working FluidsMetal Working Fluid Wt.% (Nominal Value) listed belowASTM-P-0121-SET $ 1300 / 13 x 100 mLStandard Cl P SNo. (Wt.%) (Wt.%) (Wt.%)ASTM-P-0121-01 0.000 0.000 0.000ASTM-P-0121-02 0.750 0.025 0.500ASTM-P-0121-03 0.050 0.100 3.000ASTM-P-0121-04 1.000 0.500 2.500ASTM-P-0121-05 0.100 0.005 2.000ASTM-P-0121-06 1.500 0.200 1.000ASTM-P-0121-07 2.000 0.005 3.000ASTM-P-0121-08 1.000 0.050 0.100ASTM-P-0121-09 0.500 0.400 0.000ASTM-P-0121-10 2.000 0.200 1.500ASTM-P-0121-11 0.000 0.500 1.500ASTM-P-0121-12 1.250 0.010 0.050ASTM-P-0121-13 0.050 0.300 0.050Stabilization SolutionsThe solutions were specificallydesigned for chelating andsolubilizing the organometallic lineof solids and solutions for singleand multi-element standards.Stabilizer Solutions AASTM-P-0122-0.5$ 80 / 50 mLASTM-P-0122-1$ 120 / 100 mLStabilizer Solutions BASTM-P-0123-0.5$ 80 / 50 mLASTM-P-0123-1$ 120 / 100 mL(use in conjunction with stabilizer solution A)Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com65


Wear MetalsPetrochemical StandardsProposed ASTM Method Trace MetalsASTM-P-0090-SET$ 1600 / 16 x 4 oz.Phosphorous, Sulfur, Calcium, & Zinc in Lubrication Oils by XRFCat. No. Calcium Phosphorus Sulfur Zinc Unit PriceWt.% Wt.% Wt.% Wt.%ASTM-P-0090-01 0 0 0 0 4 oz. $ 200ASTM-P-0090-02 0 0.02 0.3 0.175 4 oz. 200ASTM-P-0090-03 0.005 0 0.55 0.14 4 oz. 200ASTM-P-0090-04 0.025 0.175 0.35 0.1 4 oz. 200ASTM-P-0090-05 0.05 0.15 0.2 0.2 4 oz. 200ASTM-P-0090-06 0.075 0.225 0.5 0.15 4 oz. 200ASTM-P-0090-07 0.1 0.01 0.45 0.25 4 oz. 200ASTM-P-0090-08 0.1 0.125 0.6 0.06 4 oz. 200ASTM-P-0090-09 0.15 0.1 0.25 0.089 4 oz. 200ASTM-P-0090-10 0.2 0.008 0.075 0.12 4 oz. 200ASTM-P-0090-11 0.25 0.05 0.125 0 4 oz. 200ASTM-P-0090-12 0.3 0.06 0.1 0.13 4 oz. 200ASTM-P-0090-13 0.35 0.004 0.4 0.11 4 oz. 200ASTM-P-0090-14 0.4 0.2 0.175 0.05 4 oz. 200ASTM-P-0090-15 0.5 0.03 0.15 0.07 4 oz. 200ASTM-P-0090-16 0.6 0.005 0.05 0.08 4 oz. 200Proposed ASTM Method for Chlorine in Lube Oils Chlorine in Lube OilsASTM-P-0092-SET$ 400 / 7 x 4 oz.Cat. No. Chlorine Chlorine Unit PriceWt. % µg/gASTM-P-0092-BL Blank Blank 4 oz. $ 10ASTM-P-0092-0.1X 0.001 10 4 oz. 75ASTM-P-0092-1X 0.01 100 4 oz. 75ASTM-P-0092-5X 0.05 500 4 oz. 75ASTM-P-0092-10X 0.1 1,000 4 oz. 75ASTM-P-0092-100X 1 10,000 4 oz. 75ASTM-P-0092-500X 5 50,000 4 oz. 75ORGANOMETALLICCThe Organo Tin standards shown below were developed in response to concerns about Organo Tin as an endocrine disrupter. Organo Tincompounds such as Tributyl Tin were used as marine antifouling agents and Triphenyl Tin as a crop pesticide.Organo Tin AnalysisButyltin Chloride StandardOMT-001$ 40 / 1 x 1 mLOMT-001-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH 2 Cl 2 4 comps.Butyltin trichlorideDibutyltin dichlorideSample Extraction, Derivatization & Cleanup with Analysis by Flame-Photometric DetectorTetrabutyltinTributyltin chlorideTri-n-propyltin ChlorideSurrogate StandardOMT-003$ 30 / 1 x 1 mLOMT-003-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL in CH 2 Cl 2Tri-n-propyltin chlorideTetra-n-propyltin chlorideInternal StandardOMT-005$ 40 / 1 x 1 mLOMT-005-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL in CH 2 Cl 2Tetra-n-propyl tin chloridePhenyltin Chloride StandardOMT-002$ 40 / 1 x 1 mLOMT-002-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH 2 Cl 2 4 comps.Diphenyltin dichloridePhenyltin trichlorideTetraphenyltinTriphenyltin chlorideTripentyltin ChlorideSurrogate StandardOMT-004$ 30 / 1 x 1 mLOMT-004-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL in CH 2 Cl 2Tripentyltin chlorideTetrapentyltin ChlorideInternal StandardOMT-006$ 30 / 1 x 1 mLOMT-006-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL in CH 2 Cl 2Tetrapentyltin chloride66 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Inorganic StandardsINOICP, ICP/MS, AA, Ion ChromUsed for influent and effluent monitoring in aqueous matrices by ASTM and other EPA Methods inthe Petrochemical Industry.•Formulated from High Purity Starting Materials, Water & Acids• Concentration verified by Wet Chemical & Instrumental Analysis• Certificate of Analysis provided with each Standard• Actual Lot Analysis provided on label & Certificate of Analysis• Packaged in specially prepared pre-cleaned bottles• 18 Month Stability DatingInorganic PetrochemicalReference StandardspageICP 68-71IPC/MS 72AA 73-75Ion Chrom 76-79Traceable to NIST Reference MaterialsAll NoHaz products come as kits including20 mL of concentrate, pre-cleaned and prelabeleddilution bottle, instructions andCertificate of AnalysisEmptyPre-Washed500 mLBottleStop Paying Hazardous Shipping Fees!AccuNoHaz20 mLConcentrateHAZFEEICP69 elements at 10K µg/mL &59 elements at 25K µg/mLsee pages 68-71AA69 elements at 10K µg/mL &59 elements at 25K µg/mLsee pages 73-75INORGANIC20 mL meets the Excepted Quantity rule under DOT & IATA regulations whichdo not require hazardous shipping fees.Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com67


ICP Single Element StandardsPlasma Emission SpectroscopyICPElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceAluminum 20 mL ------ -- ------ -- ICP-01N-10X-20ML $ 37 ICP-01N-25X-20ML $ 70Al(NO 3 ) 3 • 9H 2 O 50 mL ------ -- ICP-01N-0.5-10X $ 34 ------ -- ------ --2-5% Nitric acid 100 mL ICP-01N-1 $ 34 ICP-01N-1-10X 59 ------ -- ------ --500 mL ICP-01N-5 67 ICP-01N-5-10X 175 ------ -- ------ --Antimony 20 mL ------ -- ------ -- ICP-02N-10X-20ML 37 ------ --Sb 50 mL ------ -- ICP-02N-0.5-10X 36 ------ -- ------ --2-5% Nitric acid 100 mL ICP-02N-1 34 ICP-02N-1-10X 65 ------ -- ------ --500 mL ICP-02N-5 67 ICP-02N-5-10X 135 ------ -- ------ --Arsenic 20 mL ------ -- ------ -- ICP-03N-10X-20ML 37 ICP-03N-25X-20ML 70As 50 mL ------ -- ICP-03N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-03N-1 34 ICP-03N-1-10X 54 ------ -- ------ --500 mL ICP-03N-5 67 ICP-03N-5-10X 120 ------ -- ------ --Barium 20 mL ------ -- ------ -- ICP-04N-10X-20ML 37 ICP-04N-25X-20ML 70Ba(NO 3 ) 2 50 mL ------ -- ICP-04N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-04N-1 34 ICP-04N-1-10X 54 ------ -- ------ --500 mL ICP-04N-5 67 ICP-04N-5-10X 120 ------ -- ------ --Beryllium 20 mL ------ -- ------ -- ICP-05N-10X-20ML 37 ------ --BeO(C 2 H 3 O 2 ) 6 50 mL ------ -- ICP-05N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-05N-1 34 ICP-05N-1-10X 54 ------ -- ------ --500 mL ICP-05N-5 67 ICP-05N-5-10X 240 ------ -- ------ --Bismuth 20 mL ------ -- ------ -- ICP-06N-10X-20ML 37 ICP-06N-25X-20ML 70Bi 50 mL ------ -- ICP-06N-0.5-10X 36 ------ -- ------ --2-5% Nitric acid 100 mL ICP-06N-1 34 ICP-06N-1-10X 65 ------ -- ------ --500 mL ICP-06N-5 67 ICP-06N-5-10X 135 ------ -- ------ --Boron 20 mL ------ -- ------ -- ICP-07W-10X-20ML 37 ------ --H 3 BO 3 50 mL ------ -- ICP-07W-0.5-10X 32 ------ -- ------ --Water tr. NH4OH 100 mL ICP-07W-1 34 ICP-07W-1-10X 54 ------ -- ------ --500 mL ICP-07W-5 67 ICP-07W-5-10X 120 ------ -- ------ --Cadmium 20 mL ------ -- ------ -- ICP-08N-10X-20ML 37 ICP-08N-25X-20ML 70Cd 50 mL ------ -- ICP-08N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-08N-1 34 ICP-08N-1-10X 54 ------ -- ------ --500 mL ICP-08N-5 67 ICP-08N-5-10X 120 ------ -- ------ --Calcium 20 mL ------ -- ------ -- ICP-09N-10X-20ML 37 ICP-09N-25X-20ML 70CaCO 3 50 mL ------ -- ICP-09N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-09N-1 34 ICP-09N-1-10X 54 ------ -- ------ --500 mL ICP-09N-5 67 ICP-09N-5-10X 120 ------ -- ------ --Cerium 20 mL ------ -- ------ -- ICP-11N-10X-20ML 37 ICP-11N-25X-20ML 80Ce(NO 3 ) 3 50 mL ------ -- ICP-11N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-11N-1 34 ICP-11N-1-10X 54 ------ -- ------ --500 mL ICP-11N-5 67 ICP-11N-5-10X 168 ------ -- ------ --Cesium 20 mL ------ -- ------ -- ICP-12N-10X-20ML 55 ICP-12N-25X-20ML 100CsNO 3 50 mL ------ -- ICP-12N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-12N-1 42 ICP-12N-1-10X 75 ------ -- ------ --500 mL ICP-12N-5 82 ICP-12N-5-10X 231 ------ -- ------ --Chromium 20 mL ------ -- ------ -- ICP-13N-10X-20ML 37 ICP-13N-25X-20ML 70reduced to (+3) state 50 mL ------ -- ICP-13N-0.5-10X 34 ------ -- ------ --(NH 4 ) 2 Cr 2 O 7 100 mL ICP-13N-1 34 ICP-13N-1-10X 59 ------ -- ------ --2-5% Nitric acid 500 mL ICP-13N-5 67 ICP-13N-5-10X 125 ------ -- ------ --Chromium 50 mL -------------- ICP-13H-0.5-10X 34 ICP-13H-0.5-10X 34 ------ --reduced to (+3) state 100 mL ICP-13H-1 34 ICP-13H-1-10X 59 ------ -- ------ --Cr 500 mL ICP-13H-5 67 ICP-13H-5-10X 125 ------ -- ------ --2-5% Nitric acidCobalt 20 mL ------ -- ------ -- ICP-14N-10X-20ML 37 ICP-14N-25X-20ML 70Co 50 mL ------ -- ICP-14N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-14N-1 34 ICP-14N-1-10X 54 ------ -- ------ --500 mL ICP-14N-5 67 ICP-14N-5-10X 168 ------ -- ------ --Copper 20 mL ------ -- ------ -- ICP-15N-10X-20ML 37 ICP-15N-25X-20ML 70Cu 50 mL ------ -- ICP-15N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-15N-1 34 ICP-15N-1-10X 54 ------ -- ------ --500 mL ICP-15N-5 67 ICP-15N-5-10X 120 ------ -- ------ --Dysprosium 20 mL ------ -- ------ -- ICP-16N-10X-20ML 55 ICP-16N-25X-20ML 100Dy 2 O 3 50 mL ------ -- ICP-16N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-16N-1 42 ICP-16N-1-10X 75 ------ -- ------ --500 mL ICP-16N-5 82 ICP-16N-5-10X 231 ------ -- ------ --Erbium 20 mL ------ -- ------ -- ICP-17N-10X-20ML 55 ICP-17N-25X-20ML 100Er 2 O 3 50 mL ------ -- ICP-17N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-17N-1 42 ICP-17N-1-10X 85 ------ -- ------ --500 mL ICP-17N-5 82 ICP-17N-5-10X 259 ------ -- ------ --Europium 20 mL ------ -- ------ -- ICP-18N-10X-20ML 55 ICP-18N-25X-20ML 100Eu 2 O 3 50 mL ------ -- ICP-18N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-18N-1 42 ICP-18N-1-10X 85 ------ -- ------ --500 mL ICP-18N-5 82 ICP-18N-5-10X 185 ------ -- ------ --Gadolinium 20 mL ------ -- ------ -- ICP-19N-10X-20ML 55 ICP-19N-25X-20ML 100Gd 2 O 3 50 mL ------ -- ICP-19N-0.5-10X 69 ------ -- ------ --2-5% Nitric acid 100 mL ICP-19N-1 42 ICP-19N-1-10X 115 ------ -- ------ --500 mL ICP-19N-5 82 ICP-19N-5-10X 315 ------ -- ------ --68 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ICP Single Element StandardsPlasma Emission SpectroscopyElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceGallium 20 mL ------ -- ------ -- ICP-20N-10X-20ML $ 55 ------ --Ga 50 mL ------ -- ICP-20N-0.5-10X $ 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-20N-1 $ 42 ICP-20N-1-10X 75 ------ -- ------ --500 mL ICP-20N-5 82 ICP-20N-5-10X 165 ------ -- ------ --Germanium 20 mL ------ -- ------ -- ICP-21W-10X-20ML 55 ------ --(NH 4 ) 2 GeF 6 50 mL ------ -- ICP-21W-0.5-10X 52 ------ -- ------ --Water tr. HF 100 mL ICP-21W-1 42 ICP-21W-1-10X 85 ------ -- ------ --500 mL ICP-21W-5 82 ICP-21W-5-10X 231 ------ -- ------ --Gold 20 mL ------ -- ------ -- ICP-22H-10X-20ML 95 ICP-22H-25X-20ML $ 165Au 50 mL ------ -- ICP-22H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-22H-1 78 ICP-22H-1-10X 295 ------ -- ------ --500 mL ICP-22H-5 152 ICP-22H-5-10X 695 ------ -- ------ --Hafnium 20 mL ------ -- ------ -- ICP-23N-10X-20ML 75 ICP-23N-25X-20ML 135HfO 2 50 mL ------ -- ICP-23N-0.5-10X 80 ------ -- ------ --2-5% Nitric acid tr. HF 100 mL ICP-23N-1 60 ICP-23N-1-10X 135 ------ -- ------ --500 mL ICP-23N-5 118 ICP-23N-5-10X 364 ------ -- ------ --Holmium 20 mL ------ -- ------ -- ICP-24N-10X-20ML 55 ICP-24N-25X-20ML 100Ho 2 O 3 50 mL ------ -- ICP-24N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-24N-1 42 ICP-24N-1-10X 85 ------ -- ------ --500 mL ICP-24N-5 82 ICP-24N-5-10X 259 ------ -- ------ --Indium 20 mL ------ -- ------ -- ICP-25N-10X-20ML 55 ICP-25N-25X-20ML 100In 50 mL ------ -- ICP-25N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-25N-1 42 ICP-25N-1-10X 85 ------ -- ------ --500 mL ICP-25N-5 82 ICP-25N-5-10X 185 ------ -- ------ --Iridium 20 mL ------ -- ------ -- ICP-26H-10X-20ML 95 ICP-26H-25X-20ML 175IrCl 3 • 3H 2 0 50 mL ------ -- ICP-26H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-26H-1 78 ICP-26H-1-10X 295 ------ -- ------ --500 mL ICP-26H-5 152 ICP-26H-5-10X 695 ------ -- ------ --Iron 20 mL ------ -- ------ -- ICP-27N-10X-20ML 37 ICP-27N-25X-20ML 70Fe 50 mL ------ -- ICP-27N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-27N-1 34 ICP-27N-1-10X 54 ------ -- ------ --500 mL ICP-27N-5 67 ICP-27N-5-10X 120 ------ -- ------ --Lanthanum 20 mL ------ -- ------ -- ICP-28N-10X-20ML 37 ICP-28N-25X-20ML 80La 2 O 3 50 mL ------ -- ICP-28N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-28N-1 34 ICP-28N-1-10X 54 ------ -- ------ --500 mL ICP-28N-5 67 ICP-28N-5-10X 168 ------ -- ------ --Lead 20 mL ------ -- ------ -- ICP-29N-10X-20ML 37 ICP-29N-25X-20ML 70Pb(NO 3 ) 2 50 mL ------ -- ICP-29N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-29N-1 34 ICP-29N-1-10X 54 ------ -- ------ --500 mL ICP-29N-5 67 ICP-29N-5-10X 168 ------ -- ------ --Lithium 20 mL ------ -- ------ -- ICP-30N-10X-20ML 37 ICP-30N-25X-20ML 70Li 2 CO 3 50 mL ------ -- ICP-30N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-30N-1 34 ICP-30N-1-10X 54 ------ -- ------ --500 mL ICP-30N-5 67 ICP-30N-5-10X 120 ------ -- ------ --Lutetium 20 mL ------ -- ------ -- ICP-31N-10X-20ML 90 ICP-31N-25X-20ML 300Lu 2 O 3 50 mL ------ -- ICP-31N-0.5-10X 175 ------ -- ------ --2-5% Nitric acid 100 mL ICP-31N-1 75 ICP-31N-1-10X 295 ------ -- ------ --500 mL ICP-31N-5 285 ICP-31N-5-10X 1393 ------ -- ------ --Magnesium 20 mL ------ -- ------ -- ICP-32N-10X-20ML 37 ICP-32N-25X-20ML 70MgO 50 mL ------ -- ICP-32N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-32N-1 34 ICP-32N-1-10X 54 ------ -- ------ --500 mL ICP-32N-5 67 ICP-32N-5-10X 120 ------ -- ------ --Manganese 20 mL ------ -- ------ -- ICP-33N-10X-20ML 37 ICP-33N-25X-20ML 70Mn(C 2 H 3 O 2 ) 2 50 mL ------ -- ICP-33N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-33N-1 34 ICP-33N-1-10X 54 ------ -- ------ --500 mL ICP-33N-5 67 ICP-33N-5-10X 168 ------ -- ------ --Mercury 20 mL ------ -- ------ -- ICP-34N-10X-20ML 37 ICP-34N-25X-20ML 70Hg 50 mL ------ -- ICP-34N-0.5-10X 32 ------ -- ------ --10% Nitric acid 100 mL ICP-34N-1 34 ICP-34N-1-10X 54 ------ -- ------ --500 mL ICP-34N-5 67 ICP-34N-5-10X 120 ------ -- ------ --Molybdenum 20 mL ------ -- ------ -- ICP-35W-10X-20ML 37 ICP-35W-25X-20ML 70(NH 4 ) 2 MoO 4 50 mL ------ -- ICP-35W-0.5-10X 32 ------ -- ------ --Water tr. NH 4 OH 100 mL ICP-35W-1 34 ICP-35W-1-10X 54 ------ -- ------ --500 mL ICP-35W-5 67 ICP-35W-5-10 120 ------ -- ------ --Neodymium 20 mL ------ -- ------ -- ICP-36N-10X-20ML 37 ICP-36N-25X-20ML 80Nd 2 O 3 50 mL ------ -- ICP-36N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-36N-1 34 ICP-36N-1-10X 75 ------ -- ------ --500 mL ICP-36N-5 67 ICP-36N-5-10X 203 ------ -- ------ --Nickel 20 mL ------ -- ------ -- ICP-37N-10X-20ML 37 ICP-37N-25X-20ML 70Ni 50 mL ------ -- ICP-37N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-37N-1 34 ICP-37N-1-10X 54 ------ -- ------ --500 mL ICP-37N-5 67 ICP-37N-5-10X 120 ------ -- ------ --ICP* see page 67 for detailsSingle Element Standards for Plasma Emission Spectroscopy Continued on Next PageFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com69


ICP Single Element StandardsPlasma Emission SpectoscopyICPElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceNiobium 20 mL ------ -- ------ -- ICP-38W-10X-20ML $ 37 ICP-38W-25X-20ML $ 80Nb 2 O 5 50 mL ------ -- ICP-38W-0.5-10X $ 38 ------ -- ------ --Water tr. HF 100 mL ICP-38W-1 $ 34 ICP-38W-1-10X 64 ------ -- ------ --500 mL ICP-38W-5 67 ICP-38W-5-10X 175 ------ -- ------ --Palladium 20 mL ------ -- ------ -- ICP-40H-10X-20ML 95 ICP-40H-25X-20ML 165Pd 50 mL ------ -- ICP-40H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-40H-1 78 ICP-40H-1-10X 295 ------ -- ------ --500 mL ICP-40H-5 152 ICP-40H-5-10X 973 ------ -- ------ --Phosphorus 20 mL ------ -- ------ -- ICP-41W-10X-20ML 37 ------ --NH 4 H 2 PO 4 50 mL ------ -- ICP-41W-0.5-10X 32 ------ -- ------ --Water 100 mL ICP-41W-1 34 ICP-41W-1-10X 54 ------ -- ------ --500 mL ICP-41W-5 67 ICP-41W-5-10X 120 ------ -- ------ --Platinum 20 mL ------ -- ------ -- ICP-42H-10X-20ML 95 ICP-42H-25X-20ML 165Pt 50 mL ------ -- ICP-42H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-42H-1 78 ICP-42H-1-10X 295 ------ -- ------ --500 mL ICP-42H-5 152 ICP-42H-5-10X 695 ------ -- ------ --Potassium 20 mL ------ -- ------ -- ICP-43N-10X-20ML 37 ICP-43N-25X-20ML 70KNO 3 50 mL ------ -- ICP-43N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-43N-1 34 ICP-43N-1-10X 54 ------ -- ------ --500 mL ICP-43N-5 67 ICP-43N-5-10X 120 ------ -- ------ --Praseodymium 20 mL ------ -- ------ -- ICP-44N-10X-20ML 55 ICP-44N-25X-20ML 100Pr 6 O 11 50 mL ------ -- ICP-44N-0.5-10X 72 ------ -- ------ --2-5% Nitric acid 100 mL ICP-44N-1 42 ICP-44N-1-10X 120 ------ -- ------ --500 mL ICP-44N-5 82 ICP-44N-5-10X 329 ------ -- ------ --Rhenium 20 mL ------ -- ------ -- ICP-45W-10X-20ML 95 ICP-45W-25X-20ML 175Re 50 mL ------ -- ICP-45W-0.5-10X 175 ------ -- ------ --Water 100 mL ICP-45W-1 78 ICP-45W-1-10X 295 ------ -- ------ --500 mL ICP-45W-5 152 ICP-45W-5-10X 695 ------ -- ------ --Rhodium 20 mL ------ -- ------ -- ICP-46H-10X-20ML 250 ICP-46H-25X-20ML 475RhCl 3 • 3H 2 O 50 mL ------ -- ICP-46H-0.5-10X 315 ------ -- ------ --10% HCl (min.) 100 mL ICP-46H-1 190 ICP-46H-1-10X 525 ------ -- ------ --500 mL ICP-46H-5 425 ICP-46H-5-10X 2050 ------ -- ------ --Rubidium 20 mL ------ -- ------ -- ICP-47N-10X-20ML 37 ICP-47N-25X-20ML 80RbNO 3 50 mL ------ -- ICP-47N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-47N-1 36 ICP-47N-1-10X 85 ------ -- ------ --500 mL ICP-47N-5 70 ICP-47N-5-10X 175 ------ -- ------ --Ruthenium 20 mL ------ -- ------ -- ICP-48H-10X-20ML 95 ICP-48H-25X-20ML 185RuCl 3 • 3H 2 O 50 mL ------ -- ICP-48H-0.5-10X 175 ------ -- ------ --10% HCl 100 mL ICP-48H-1 78 ICP-48H-1-10X 295 ------ -- ------ --500 mL ICP-48H-5 152 ICP-48H-5-10X 695 ------ -- ------ --Samarium 20 mL ------ -- ------ -- ICP-49N-10X-20ML 55 ICP-49N-25X-20ML 100Sm 2 O 3 50 mL ------ -- ICP-49N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-49N-1 42 ICP-49N-1-10X 75 ------ -- ------ --500 mL ICP-49N-5 82 ICP-49N-5-10X 231 ------ -- ------ --Scandium 20 mL ------ -- ------ -- ICP-50N-10X-20ML 95 ICP-50N-25X-20ML 175Sc 2 O 3 50 mL ------ -- ICP-50N-0.5-10X 175 ------ -- ------ --2-5% Nitric acid 100 mL ICP-50N-1 78 ICP-50N-1-10X 295 ------ -- ------ --500 mL ICP-50N-5 152 ICP-50N-5-10X 973 ------ -- ------ --Selenium 20 mL ------ -- ------ -- ICP-51N-10X-20ML 37 ICP-51N-25X-20ML 70Se 50 mL ------ -- ICP-51N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-51N-1 34 ICP-51N-1-10X 54 ------ -- ------ --500 mL ICP-51N-5 67 ICP-51N-5-10X 120 ------ -- ------ --Silicon 20 mL ------ -- ------ -- ICP-52W-10X-20ML 37 ------ --(NH 4 )2SiF 6 50 mL ------ -- ICP-52W-0.5-10X 32 ------ -- ------ --Water tr. HF 100 mL ICP-52W-1 34 ICP-52W-1-10X 54 ------ -- ------ --500 mL ICP-52W-5 67 ICP-52W-5-10X 168 ------ -- ------ --Silver 20 mL ------ -- ------ -- ICP-53N-10X-20ML 37 ICP-53N-25X-20ML 70AgNO 3 50 mL ------ -- ICP-53N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid 100 mL ICP-53N-1 34 ICP-53N-1-10X 70 ------ -- ------ --500 mL ICP-53N-5 67 ICP-53N-5-10X 145 ------ -- ------ --Sodium 20 mL ------ -- ------ -- ICP-54N-10X-20ML 37 ICP-54N-25X-20ML 70NaNO 3 50 mL ------ -- ICP-54N-0.5-10X 34 ------ -- ------ --2-5% Nitric acid 100 mL ICP-54N-1 34 ICP-54N-1-10X 59 ------ -- ------ --500 mL ICP-54N-5 67 ICP-54N-5-10X 175 ------ -- ------ --Strontium 20 mL ------ -- ------ -- ICP-55N-10X-20ML 37 ICP-55N-25X-20ML 70Sr(NO 3 ) 2 50 mL ------ -- ICP-55N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid 100 mL ICP-55N-1 34 ICP-55N-1-10X 70 ------ -- ------ --500 mL ICP-55N-5 67 ICP-55N-5-10X 203 ------ -- ------ --Sulfur 20 mL ------ -- ------ -- ICP-56W-10X-20ML 37 ICP-56W-25X-20ML 70(NH 4 ) 2 SO4 50 mL ------ -- ICP-56W-0.5-10X 32 ------ -- ------ --Water 100 mL ICP-56W-1 34 ICP-56W-1-10X 54 ------ -- ------ --500 mL ICP-56W-5 67 ICP-56W-5-10X 120 ------ -- ------ --Tantalum 20 mL ------ -- ------ -- ICP-57W-10X-20ML 55 ICP-57W-25X-20ML 100Ta 50 mL ------ -- ICP-57W-0.5-10X 52 ------ -- ------ --Water tr. HF 100 mL ICP-57W-1 42 ICP-57W-1-10X 85 ------ -- ------ --500 mL ICP-57W-5 82 ICP-57W-5-10X 224 ------ -- ------ --70 Quality System is Certified to comply with the International ISO 9001 Quality Standard


ICP Single Element StandardsPlasma Emission SpectroscopyElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceTellurium 20 mL ------ -- ------ -- ICP-58H-10X-20ML $ 37 ------ --Te 50 mL ------ -- ICP-58H-0.5-10X $ 46 ------ -- ------ --10% HCl (min.) 100 mL ICP-58H-1 $ 34 ICP-58H-1-10X 78 ------ -- ------ --500 mL ICP-58H-5 67 ICP-58H-5-10X 210 ------ -- ------ --Terbium 20 mL ------ -- ------ -- ICP-59N-10X-20ML 55 ICP-59N-25X-20ML $ 100Tb 4 O 7 50 mL ------ -- ICP-59N-0.5-10X 69 ------ -- ------ --2-5% Nitric acid 100 mL ICP-59N-1 42 ICP-59N-1-10X 115 ------ -- ------ --500 mL ICP-59N-5 82 ICP-59N-5-10X 315 ------ -- ------ --Thallium 20 mL ------ -- ------ -- ICP-60N-10X-20ML 37 ICP-60N-25X-20ML 70Tl 50 mL ------ -- ICP-60N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-60N-1 34 ICP-60N-1-10X 54 ------ -- ------ --500 mL ICP-60N-5 67 ICP-60N-5-10X 125 ------ -- ------ --Thorium 100 mL ICP-61N-1 34 ------ -- ------ -- ------ --Th(NO 3 )4 • 4H 2 O 500 mL ICP-61N-5 67 ------ -- ------ -- ------ --2-5% Nitric acidThulium 20 mL ------ -- ------ -- ICP-62N-10X-20ML 75 ICP-62N-25X-20ML 135Tm 2 O 3 50 mL ------ -- ICP-62N-0.5-10X 78 ------ -- ------ --2-5% Nitric acid 100 mL ICP-62N-1 58 ICP-62N-1-10X 130 ------ -- ------ --500 mL ICP-62N-5 120 ICP-62N-5-10X 250 ------ -- ------ --Tin ------ -- ICP-63N-10X-20ML 37 ICP-63N-25X-20ML 70Sn 50 mL -------------- ICP-63N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid tr. HF 100 mL ICP-63N-1 34 ICP-63N-1-10X 70 ------ -- ------ --500 mL ICP-63N-5 67 ICP-63N-5-10X 135 ------ -- ------ --Tin 50 mL -------------- ------ -- ICP-63H-0.5-10X 42 ------ --Sn 100 mL ICP-63H-1 34 ICP-63H-1-10X 70 ------ -- ------ --HCl 500 mL ICP-63H-5 67 ICP-63H-5-10X 135 ------ -- ------ --Titanium 20 mL ------ -- ------ -- ICP-64W-10X-20ML 37 ------ --(NH 4 ) 2 TiF 6 50 mL ------ -- ICP-64W-0.5-10X 32 ------ -- ------ --Water tr. HF 100 mL ICP-64W-1 34 ICP-64W-1-10X 54 ------ -- ------ --500 mL ICP-64W-5 67 ICP-64W-5-10X 120 ------ -- ------ --Tungsten 20 mL ------ -- ------ -- ICP-65W-10X-20ML 37 ------ --(NH 4 ) 2 WO 4 50 mL ------ -- ICP-65W-0.5-10X 32 ------ -- ------ --Water tr. NH 4 OH 100 mL ICP-65W-1 34 ICP-65W-1-10X 54 ------ -- ------ --500 mL ICP-65W-5 67 ICP-65W-5-10X 168 ------ -- ------ --Uranium 50 mL ------ -- ------ -- ------ -- ------ --U 3 O 8 100 mL ICP-66N-1 42 ------ -- ------ -- ------ --500 mL ICP-66N-5 82 ------ -- ------ -- ------ --Vanadium 20 mL ------ -- ------ -- ICP-67N-10X-20ML 37 ICP-67N-25X-20ML 70NH 4 VO 3 50 mL ------ -- ICP-67N-0.5-10X 36 ------ -- ------ --2-5% Nitric acid 100 mL ICP-67N-1 34 ICP-67N-1-10X 65 ------ -- ------ --500 mL ICP-67N-5 67 ICP-67N-5-10X 135 ------ -- ------ --Ytterbium 20 mL ------ -- ------ -- ICP-68N-10X-20ML 55 ICP-68N-25X-20ML 100Yb 2 O 3 50 mL ------ -- ICP-68N-0.5-10X 60 ------ -- ------ --2-5% Nitric acid 100 mL ICP-68N-1 42 ICP-68N-1-10X 100 ------ -- ------ --500 mL ICP-68N-5 82 ICP-68N-5-10X 273 ------ -- ------ --Yttrium 20 mL ------ -- ------ -- ICP-69N-10X-20ML 37 ICP-69N-25X-20ML 70Y 2 O 3 50 mL ------ -- ICP-69N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-69N-1 34 ICP-69N-1-10X 54 ------ -- ------ --500 mL ICP-69N-5 67 ICP-69N-5-10X 120 ------ -- ------ --Zinc 20 mL ------ -- ------ -- ICP-70N-10X-20ML 37 ICP-70N-25X-20ML 70Zn 50 mL ------ -- ICP-70N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-70N-1 34 ICP-70N-1-10X 54 ------ -- ------ --500 mL ICP-70N-5 67 ICP-70N-5-10X 120 ------ -- ------ --Zirconium 20 mL ------ -- ------ -- ICP-71N-10X-20ML 37 ICP-71N-25X-20ML 70ZrO(NO 3 ) 2 50 mL ------ -- ICP-71N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid 100 mL ICP-71N-1 34 ICP-71N-1-10X 70 ------ -- ------ --500 mL ICP-71N-5 67 ICP-71N-5-10X 203 ------ -- ------ --ICPCalibration and Matrix BlanksNitric Acid BlankHydrochloric Acid BlankCLP-BLN-5 $ 30 / 500 mL CLP-BLH-5 $ 30 / 500 mLCLP-BLN-L $ 45 / L (2 x 500 mL) CLP-BLH-L $ 45 / L (2 x 500 mL)* see page 67 for detailsMixed Acid BlankWater BlankCLP-BLMA-5 $ 30 / 500 mL CLP-BLW-5 $ 30 / 500 mLCLP-BLMA-L $ 45 / L (2 x 500 mL)$ 40 / L (2 x 500 mL)5% HNO 3 in ASTM Type I Water5% HCl in ASTM Type I Water5% HCl + 1% HNO 3 inASTM Type I WaterASTM Type I WaterFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com71


ICP/MS Single Element StandardsPlasma Emission / Mass SpectroscopyPure Matrix Special Packaging Traceability to NIST Reference MaterialsAccuStandard’s ICP/MS Standards are formulated to meet the needs of this very special instrument. As matrix effect is of utmost concern, eachstandard is formulated in specially purified de-ionized 18 megohm water and Parts per Trillion acids; after both wet chemical and instrumentalanalysis, the standards are packaged in acid leached FLPE containers to provide required protection and, of course, all standards are traceable tothe National Institute of Standards and Technology (NIST) weights and Reference Materials.100 µg/mL Conc. 1,000 µg/mL Conc. 10,000 µg/mL Conc.Element Matrix Unit Cat. No. Price Cat. No. Price Cat. No. PriceICP/MSAl (Aluminum) 2% HNO 3 100 mL ICP-MS-01N-0.01X-1 $ 34 ICP-MS-01N-0.1X-1 $ 45 ICP-MS-01N-1 $ 76Sb (Antimony) 2% HNO 3 100 mL ICP-MS-02N-0.01X-1 34 ICP-MS-02N-0.1X-1 45 ICP-MS-02N-1 76As (Arsenic) 2% HNO 3 100 mL ICP-MS-03N-0.01X-1 34 ICP-MS-03N-0.1X-1 45 ICP-MS-03N-1 76Ba (Barium) 2% HNO 3 100 mL ICP-MS-04N-0.01X-1 34 ICP-MS-04N-0.1X-1 45 ICP-MS-04N-1 76Be (Beryllium) 2% HNO 3 100 mL ICP-MS-05N-0.01X-1 34 ICP-MS-05N-0.1X-1 45 ICP-MS-05N-1 76Bi (Bismuth) 2% HNO 3 100 mL ICP-MS-06N-0.01X-1 34 ICP-MS-06N-0.1X-1 45 ICP-MS-06N-1 76Cd (Cadmium) 2% HNO 3 100 mL ICP-MS-08N-0.01X-1 34 ICP-MS-08N-0.1X-1 45 ICP-MS-08N-1 76Ca (Calcium) 2% HNO 3 100 mL ICP-MS-09N-0.01X-1 34 ICP-MS-09N-0.1X-1 45 ICP-MS-09N-1 76Cr (Chromium) 2% HNO 3 100 mL ICP-MS-13N-0.01X-1 34 ICP-MS-13N-0.1X-1 45 ICP-MS-13N-1 76Co (Cobalt) 2% HNO 3 100 mL ICP-MS-14N-0.01X-1 34 ICP-MS-14N-0.1X-1 45 ICP-MS-14N-1 76Cu (Copper) 2% HNO 3 100 mL ICP-MS-15N-0.01X-1 34 ICP-MS-15N-0.1X-1 45 ICP-MS-15N-1 76Ge (Germanium) H 2 O tr. HF 100 mL ICP-MS-21W-0.01X-1 42 ICP-MS-21W-0.1X-1 53 ICP-MS-21W-1 84Au (Gold) 10% HCl 100 mL ICP-MS-22H-0.01X-1 78 ICP-MS-22H-0.1X-1 89 ICP-MS-22H-1 120In (Indium) 2% HNO 3 100 mL ICP-MS-25N-0.01X-1 42 ICP-MS-25N-0.1X-1 53 ICP-MS-25N-1 84Fe (Iron) 5% HNO 3 100 mL ICP-MS-27N-0.01X-1 34 ICP-MS-27N-0.1X-1 45 ICP-MS-27N-1 76Pb (Lead) 2% HNO 3 100 mL ICP-MS-29N-0.01X-1 34 ICP-MS-29N-0.1X-1 45 ICP-MS-29N-1 76Li (Lithium) 2% HNO 3 100 mL ICP-MS-30N-0.01X-1 34 ICP-MS-30N-0.1X-1 45 ICP-MS-30N-1 76Mg (Magnesium) 2% HNO 3 100 mL ICP-MS-32N-0.01X-1 34 ICP-MS-32N-0.1X-1 45 ICP-MS-32N-1 76Mn (Manganese) 2% HNO 3 100 mL ICP-MS-33N-0.01X-1 34 ICP-MS-33N-0.1X-1 45 ICP-MS-33N-1 76Hg (Mercury) 10% HNO 3 100 mL ICP-MS-34N-0.01X-1 34 ICP-MS-34N-0.1X-1 45 ICP-MS-34N-1 76Mo (Molybdenum) H 2 O tr. NH 4 OH 100 mL ICP-MS-35W-0.01X-1 34 ICP-MS-35W-0.1X-1 45 ICP-MS-35W-1 76Ni (Nickel) 2% HNO 3 100 mL ICP-MS-37N-0.01X-1 34 ICP-MS-37N-0.1X-1 45 ICP-MS-37N-1 76P (Phosphorous) H 2 O 100 mL ICP-MS-41W-0.01X-1 34 ICP-MS-41W-0.1X-1 45 ICP-MS-41W-1 76K (Potassium) 2% HNO 3 100 mL ICP-MS-43N-0.01X-1 34 ICP-MS-43N-0.1X-1 45 ICP-MS-43N-1 76Rh (Rhodium) 10% HCl 100 mL ICP-MS-46H-0.01X-1 190 ICP-MS-46H-0.1X-1 201 ICP-MS-46H-1 232Sc (Scandium) 2% HNO 3 100 mL ICP-MS-50N-0.01X-1 78 ICP-MS-50N-0.1X-1 89 ICP-MS-50N-1 120Se (Selenium) 2% HNO 3 100 mL ICP-MS-51N-0.01X-1 34 ICP-MS-51N-0.1X-1 45 ICP-MS-51N-1 76Ag (Silver) 2% HNO 3 100 mL ICP-MS-53N-0.01X-1 34 ICP-MS-53N-0.1X-1 45 ICP-MS-53N-1 76Na (Sodium) 2% HNO 3 100 mL ICP-MS-54N-0.01X-1 34 ICP-MS-54N-0.1X-1 45 ICP-MS-54N-1 76Sr (Strontium) 2% HNO 3 100 mL ICP-MS-55N-0.01X-1 34 ICP-MS-55N-0.1X-1 45 ICP-MS-55N-1 76S (Sulphur) H 2 O 100 mL ICP-MS-56W-0.01X-1 34 ICP-MS-56W-0.1X-1 45 ICP-MS-56W-1 76Tb (Terbium) 2% HNO 3 100 mL ICP-MS-59N-0.01X-1 42 ICP-MS-59N-0.1X-1 53 ICP-MS-59N-1 84Tl (Thallium) 2% HNO 3 100 mL ICP-MS-60N-0.01X-1 34 ICP-MS-60N-0.1X-1 45 ICP-MS-60N-1 76Th (Thorium) 2% HNO 3 100 mL ICP-MS-61N-0.01X-1 34 ICP-MS-61N-0.1X-1 45 ----------------- ---Sn (Tin) 2% HNO 3 tr HF 100 mL ICP-MS-63N-0.01X-1 34 ICP-MS-63N-0.1X-1 45 ICP-MS-63N-1 76Ti (Titanium) H 2 O tr. HF 100 mL ICP-MS-64W-0.01X-1 34 ICP-MS-64W-0.1X-1 45 ICP-MS-64W-1 76U (Uranium) 2% HNO 3 100 mL ICP-MS-66N-0.01X-1 42 ICP-MS-66N-0.1X-1 53 ----------------- ---V (Vanadium) 2% HNO 3 100 mL ICP-MS-67N-0.01X-1 34 ICP-MS-67N-0.1X-1 45 ICP-MS-67N-1 76Y (Yttrium) 2% HNO 3 100 mL ICP-MS-69N-0.01X-1 34 ICP-MS-69N-0.1X-1 45 ICP-MS-69N-1 76Zn (Zinc) 2% HNO 3 100 mL ICP-MS-70N-0.01X-1 34 ICP-MS-70N-0.1X-1 45 ICP-MS-70N-1 76If you need an element that is not listed above or you require a different matrix, size orconcentration, our experienced chemists will provide you with a custom quotation.Get exactly what you need.72 Quality System is Certified to comply with the International ISO 9001 Quality Standard


AA Single Element StandardsAtomic Absorption SpectroscopyTraceable to NIST Reference MaterialsCertificate of Analysis included at No Charge with each StandardActual Concentration AnalysisMost available in either Nitric or Hydrochloric acid matrixISO 9001 Quality SystemEach standard is prepared from high purity starting material, de-ionized water and high purity acids. Every standard is instrumentally assayedto verify concentration of specified element. Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease ofrecord keeping and availability at audits.ElementStarting Mat'l1000 µg/mLMatrix Unit Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceAluminum 20 mL ------ -- AA01N-10X-20ML $ 20 AA01N-25X-20ML $ 372-5% Nitric acid 100 mL AA01N-1 $ 13 ------ -- ------ --500 mL AA01N-5 33 ------ -- ------ --Antimony 20 mL ------ -- AA02W-10X-20ML 20 ------ --H 2 O tr. HNO 3 tr. 100 mL AA02N-1 13 ------ -- ------ --Tartaric acid 500 mL AA02N-5 33 ------ -- ------ --Arsenic 20 mL ------ -- AA03N-10X-20ML 20 AA03N-25X-20ML 372-5% Nitric acid 100 mL AA03N-1 13 ------ -- ------ --500 mL AA03N-5 33 ------ -- ------ --Barium 20 mL ------ -- AA04N-10X-20ML 20 AA04N-25X-20ML 372-5% Nitric acid 100 mL AA04N-1 12 ------ -- ------ --500 mL AA04N-5 30 ------ -- ------ --Beryllium 20 mL ------ -- AA05N-10X-20ML 20 ------ --2-5% Nitric acid 100 mL AA05N-1 19 ------ -- ------ --500 mL AA05N-5 48 ------ -- ------ --Bismuth 20 mL ------ -- AA06N-10X-20ML 20 AA06N-25X-20ML 372-5% Nitric acid 100 mL AA06N-1 13 ------ -- ------ --500 mL AA06N-5 33 ------ -- ------ --Boron 20 mL ------ -- AA07W-10X-20ML 20 ------ --Water tr. NH 4 OH 100 mL AA07W-1 13 ------ -- ------ --500 mL AA07W-5 33 ------ -- ------ --Cadmium 20 mL ------ -- AA08N-10X-20ML 20 AA08N-25X-20ML 372-5% Nitric acid 100 mL AA08N-1 13 ------ -- ------ --500 mL AA08N-5 33 ------ -- ------ --Calcium 20 mL ------ -- AA09N-10X-20ML 20 AA09N-25X-20ML 372-5% Nitric acid 100 mL AA09N-1 12 ------ -- ------ --500 mL AA09N-5 30 ------ -- ------ --Cerium 20 mL ------ -- AA11N-10X-20ML 20 AA11N-25X-20ML 452-5% Nitric acid 100 mL AA11N-1 18 ------ -- ------ --500 mL AA11N-5 40 ------ -- ------ --Cesium 20 mL ------ -- AA12N-10X-20ML 35 AA12N-25X-20ML 602-5% Nitric acid 100 mL AA12N-1 15 ------ -- ------ --500 mL AA12N-5 36 ------ -- ------ --Chromium 20 mL ------ -- AA13N-10X-20ML 20 AA13N-25X-20ML 372-5% Nitric acid 100 mL AA13N-1 12 ------ -- ------ --500 mL AA13N-5 30 ------ -- ------ --Cobalt 20 mL ------ -- AA14N-10X-20ML 20 AA14N-25X-20ML 372-5% Nitric acid 100 mL AA14N-1 12 ------ -- ------ --500 mL AA14N-5 30 ------ -- ------ --Copper 20 mL ------ -- AA15N-10X-20ML 20 AA15N-25X-20ML 372-5% Nitric acid 100 mL AA15N-1 12 ------ -- ------ --500 mL AA15N-5 30 ------ -- ------ --Dysprosium 20 mL ------ -- AA16N-10X-20ML 35 AA16N-25X-20ML 602-5% Nitric acid 100 mL AA16N-1 20 ------ -- ------ --500 mL AA16N-5 45 ------ -- ------ --Erbium 20 mL ------ -- AA17N-10X-20ML 35 AA17N-25X-20ML 602-5% Nitric acid 100 mL AA17N-1 20 ------ -- ------ --500 mL AA17N-5 45 ------ -- ------ --Europium 20 mL ------ -- AA18N-10X-20ML 35 AA18N-25X-20ML 602-5% Nitric acid 100 mL AA18N-1 20 ------ -- ------ --500 mL AA18N-5 45 ------ -- ------ --Gadolinium 20 mL ------ -- AA19N-10X-20ML 35 AA19N-25X-20ML 602-5% Nitric acid 100 mL AA19N-1 20 ------ -- ------ --500 mL AA19N-5 45 ------ -- ------ --Gallium 20 mL ------ -- AA20N-10X-20ML 45 ------ --2-5% Nitric acid 100 mL AA20N-1 15 ------ -- ------ --500 mL AA20N-5 36 ------ -- ------ --Germanium 20 mL ------ -- AA21W-10X-20ML 35 ------ --Water tr. HF 100 mL AA21W-1 18 ------ -- ------ --500 mL AA21W-5 40 ------ -- ------ --Gold 20 mL ------ -- AA22H-10X-20ML 80 AA22H-25X-20ML 20010% HCl (min.) 100 mL AA22H-1 66 ------ -- ------ --500 mL AA22H-5 179 ------ -- ------ --* see page 67for detailsFor your conveniencethese elements are alsoavailable in OtherMatrices.Contact TechnicalService for more infoAAFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com73


AA Single Element StandardsAtomic Absorption SpectroscopyAAElementStarting Mat'l1000 µg/mLMatrix Unit Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceHafnium 20 mL ------ -- AA23N-10X-20ML $ 60 AA23N-25X-20ML $ 1252-5% Nitric acid tr. HF 100 mL AA23N-1 $ 45 ------ -- ------ --500 mL AA23N-5 110 ------ -- ------ --Holmium 20 mL ------ -- AA24N-10X-20ML 35 AA24N-25X-20ML 602-5% Nitric acid 100 mL AA24N-1 20 ------ -- ------ --500 mL AA24N-5 45 ------ -- ------ --Indium 20 mL ------ -- AA25N-10X-20ML 35 AA25N-25X-20ML 602-5% Nitric acid 100 mL AA25N-1 18 ------ -- ------ --500 mL AA25N-5 40 ------ -- ------ --Iridium 20 mL ------ -- AA26H-10X-20ML 70 AA26H-25X-20ML 16510% HCl (min.) 100 mL AA26H-1 65 ------ -- ------ --500 mL AA26H-5 150 ------ -- ------ --Iron 20 mL ------ -- AA27N-10X-20ML 20 AA27N-25X-20ML 372-5% Nitric acid 100 mL AA27N-1 12 ------ -- ------ --500 mL AA27N-5 30 ------ -- ------ --Lanthanum 20 mL ------ -- AA28N-10X-20ML 20 AA28N-25X-20ML 372-5% Nitric acid 100 mL AA28N-1 15 ------ -- ------ --500 mL AA28N-5 36 ------ -- ------ --Lead 20 mL ------ -- AA29N-10X-20ML 20 AA29N-25X-20ML 372-5% Nitric acid 100 mL AA29N-1 12 ------ -- ------ --500 mL AA29N-5 30 ------ -- ------ --Lithium 20 mL ------ -- AA30N-10X-20ML 20 AA30N-25X-20ML 372-5% Nitric acid 100 mL AA30N-1 12 ------ -- ------ --500 mL AA30N-5 30 ------ -- ------ --Lutetium 20 mL ------ -- AA31N-10X-20ML 80 AA31N-25X-20ML 2752-5% Nitric acid 100 mL AA31N-1 65 ------ -- ------ --500 mL AA31N-5 250 ------ -- ------ --Magnesium 20 mL ------ -- AA32N-10X-20ML 20 AA32N-25X-20ML 372-5% Nitric acid 100 mL AA32N-1 12 ------ -- ------ --500 mL AA32N-5 30 ------ -- ------ --Manganese 20 mL ------ -- AA33N-10X-20ML 20 AA33N-25X-20ML 372-5% Nitric acid 100 mL AA33N-1 11 ------ -- ------ --500 mL AA33N-5 28 ------ -- ------ --Mercury 20 mL ------ -- AA34N-10X-20ML 20 AA34N-25X-20ML 3710% Nitric acid 100 mL AA34N-1 13 ------ -- ------ --500 mL AA34N-5 33 ------ -- ------ --Molybdenum 20 mL ------ -- AA35W-10X-20ML 20 AA35W-25X-20ML 37Water tr. NH4OH 100 mL AA35W-1 13 ------ -- ------ --500 mL AA35W-5 33 ------ -- ------ --Neodymium 20 mL ------ -- AA36N-10X-20ML 25 AA36N-25X-20ML 502-5% Nitric acid 100 mL AA36N-1 20 ------ -- ------ --500 mL AA36N-5 45 ------ -- ------ --Nickel 20 mL ------ -- AA37N-10X-20ML 20 AA37N-25X-20ML 372-5% Nitric acid 100 mL AA37N-1 12 ------ -- ------ --500 mL AA37N-5 30 ------ -- ------ --Niobium 20 mL ------ -- AA38W-10X-20ML 20 AA38W-25X-20ML 37Water tr. HF 100 mL AA38W-1 15 ------ -- ------ --500 mL AA38W-5 36 ------ -- ------ --Palladium 20 mL ------ -- AA40H-10X-20ML 80 AA40H-25X-20ML 17510% HCl (min.) 100 mL AA40H-1 62 ------ -- ------ --500 mL AA40H-5 145 ------ -- ------ --Phosphorus 20 mL ------ -- AA41W-10X-20ML 20 ------ --Water 100 mL AA41W-1 13 ------ -- ------ --500 mL AA41W-5 33 ------ -- ------ --Platinum 20 mL ------ -- AA42H-10X-20ML 80 AA42H-25X-20ML 17510% HCl (min.) 100 mL AA42H-1 62 ------ -- ------ --500 mL AA42H-5 145 ------ -- ------ --Potassium 20 mL ------ -- AA43N-10X-20ML 20 AA43N-25X-20ML 372-5% Nitric acid 100 mL AA43N-1 12 ------ -- ------ --500 mL AA43N-5 30 ------ -- ------ --Praseodymium 20 mL ------ -- AA44N-10X-20ML 35 AA44N-25X-20ML 602-5% Nitric acid 100 mL AA44N-1 20 ------ -- ------ --500 mL AA44N-5 45 ------ -- ------ --Rhenium 20 mL ------ -- AA45W-10X-20ML 80 AA45W-25X-20ML 175Water 100 mL AA45W-1 65 ------ -- ------ --500 mL AA45W-5 150 ------ -- ------ --Rhodium 20 mL ------ -- AA46H-10X-20ML 210 AA46H-25X-20ML 42510% HCl (min.) 100 mL AA46H-1 80 ------ -- ------ --500 mL AA46H-5 385 ------ -- ------ --Rubidium 20 mL ------ -- AA47N-10X-20ML 20 AA47N-25X-20ML 372-5% Nitric acid 100 mL AA47N-1 15 ------ -- ------ --500 mL AA47N-5 36 ------ -- ------ --Ruthenium 20 mL ------ -- AA48H-10X-20ML 80 AA48H-25X-20ML 16510% HCl 100 mL AA48H-1 65 ------ -- ------ --500 mL AA48H-5 150 ------ -- ------ --* see page 67for details74 Quality System is Certified to comply with the International ISO 9001 Quality Standard


AA Single Element StandardsAtomic Absorption SpectroscopyElementStarting Mat'l1000 µg/mLMatrix Unit Cat. No. PriceNoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mLCat. No. Price Cat. No. PriceSamarium 20 mL ------ -- AA49N-10X-20ML $ 35 AA49N-25X-20ML $ 602-5% Nitric acid 100 mL AA49N-1 $ 20 ------ -- ------ --500 mL AA49N-5 45 ------ -- ------ --Scandium 20 mL ------ -- AA50N-10X-20ML 75 AA50N-25X-20ML 1602-5% Nitric acid 100 mL AA50N-1 62 ------ -- ------ --500 mL AA50N-5 145 ------ -- ------ --Selenium 20 mL ------ -- AA51N-10X-20ML 20 AA51N-25X-20ML 502-5% Nitric acid 100 mL AA51N-1 19 ------ -- ------ --500 mL AA51N-5 46 ------ -- ------ --Silicon 20 mL ------ -- AA-52W-10X-20ML 20 ------ --Water tr. HF 100 mL AA52W-1 13 ------ -- ------ --500 mL AA52W-5 33 ------ -- ------ --Silver 20 mL ------ -- AA53N-10X-20ML 20 AA53N-25X-20ML 452-5% Nitric acid 100 mL AA53N-1 16 ------ -- ------ --500 mL AA53N-5 40 ------ -- ------ --Sodium 20 mL ------ -- AA54N-10X-20ML 20 AA54N-25X-20ML 372-5% Nitric acid 100 mL AA54N-1 13 ------ -- ------ --500 mL AA54N-5 33 ------ -- ------ --Strontium 20 mL ------ -- AA55N-10X-20ML 20 AA55N-25X-20ML 372-5% Nitric acid 100 mL AA55N-1 12 ------ -- ------ --500 mL AA55N-5 30 ------ -- ------ --Sulfur 20 mL ------ -- AA56W-10X-20ML 20 AA56W-25X-20ML 37Water 100 mL AA56W-1 15 ------ -- ------ --500 mL AA56W-5 35 ------ -- ------ --Tantalum 20 mL ------ -- AA57W-10X-20ML 35 AA57W-25X-20ML 60Water tr. HF 100 mL AA57W-1 15 ------ -- ------ --500 mL AA57W-5 35 ------ -- ------ --Tellurium 20 mL ------ -- AA58H-10X-20ML 2010% HCl (min.) 100 mL AA58H-1 15 ------ -- ------ --500 mL AA58H-5 35 ------ -- ------ --Terbium 20 mL ------ -- AA59N-10X-20ML 35 AA59N-25X-20ML 602-5% Nitric acid 100 mL AA59N-1 20 ------ -- ------ --500 mL AA59N-5 45 ------ -- ------ --Thallium 20 mL ------ -- AA60N-10X-20ML 20 AA60N-25X-20ML 372-5% Nitric acid 100 mL AA60N-1 15 ------ -- ------ --500 mL AA60N-5 35 ------ -- ------ --Thorium 20 mL ------ -- ------ -- ------ --100 mL AA61N-1 20 ------ -- ------ --2-5% Nitric acid 500 mL AA61N-5 45 ------ -- ------ --Thulium 20 mL ------ -- AA62N-10X-20ML 65 AA62N-25X-20ML 1502-5% Nitric acid 100 mL AA62N-1 60 ------ -- ------ --500 mL AA62N-5 135 ------ -- ------ --Tin 20 mL ------ -- AA63N-10X-20ML 20 AA63N-25X-20ML 502-5% Nitric acid tr. HF 100 mL AA63N-1 19 ------ -- ------ --500 mL AA63N-5 46 ------ -- ------ --Titanium 20 mL ------ -- AA64W-10X-20ML 20 ------ --Water tr. HF 100 mL AA64W-1 13 ------ -- ------ --500 mL AA64W-5 33 ------ -- ------ --Tungsten 20 mL ------ -- AA65W-10X-20ML 20Water tr. NH4OH 100 mL AA65W-1 15 ------ -- ------ --500 mL AA65W-5 35 ------ -- ------ --Uranium 20 mL ------ -- ------ -- ------ --2-5% Nitric acid 100 mL AA66N-1 15 ------ -- ------ --500 mL AA66N-5 35 ------ -- ------ --Vanadium 20 mL ------ -- AA67N-10X-20ML 20 AA67N-25X-20ML 372-5% Nitric acid 100 mL AA67N-1 13 ------ -- ------ --500 mL AA67N-5 33 ------ -- ------ --Ytterbium 20 mL ------ -- AA68N-10X-20ML 35 AA68N-25X-20ML 602-5% Nitric acid 100 mL AA68N-1 20 ------ -- ------ --500 mL AA68N-5 45 ------ -- ------ --Yttrium 20 mL ------ -- AA69N-10X-20ML 20 AA69N-25X-20ML 372-5% Nitric acid 100 mL AA69N-1 15 ------ -- ------ --500 mL AA69N-5 35 ------ -- ------ --Zinc 20 mL ------ -- AA70N-10X-20ML 20 AA70N-25X-20ML 372-5% Nitric acid 100 mL AA70N-1 13 ------ -- ------ --500 mL AA70N-5 33 ------ -- ------ --Zirconium 20 mL ------ -- AA71N-10X-20ML 20 AA71N-25X-20ML 372-5% Nitric acid 100 mL AA71N-1 15 ------ -- ------ --500 mL AA71N-5 35 ------ -- ------ --* see page 67for detailsAAFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com75


ICIon ChromatographyAnion Singles99.999% High Purity Starting Materials18 Megohm, ASTM type 1 Water••Packaged in pre-cleaned high quality HDPE bottlesEach Standard is Supplied with a Certificate of Analysis,stating traceability to NIST, certified value and expiration dateFinal Solution is filtered through a 0.2 µm filter toeliminate contaminants (such as suspended solids andmicrobes). This extends shelf life and protects your column.Ready-To-Use Mixes and Calibration SetsMost Complete Product Line•Standards may be used for other “Classical or Wet” methods"The Right Size” allows you to purchase as much or as little as you need -minimizing waste, and assuring Fresh Solution when you need it mostNext Day Delivery on requestUsed for Influent & Effluent monitoring in aqueous matrices byASTM & other EPA Methods in the Petrochemical IndustryIon Chrom - Anion Singles (Water Matrix)Anion Conc. Price Anion Conc. Price Anion Conc. PriceSymbol (Element) Unit 100 µg/mL 200 µg/mL 1000 µg/mLF (Fluoride) 100 mL IC-F-1X-1 $ 15 IC-F-2X-1 $ 25 IC-F-10X-1 $ 45500 mL IC-F-1X-5 55 IC-F-2X-5 60 IC-F-10X-5 70Cl (Chloride) 100 mL IC-Cl-1X-1 $ 15 IC-Cl-2X-1 $ 25 IC-Cl-10X-1 $ 45500 mL IC-Cl-1X-5 55 IC-Cl-2X-5 60 IC-Cl-10X-5 70NO 2 (Nitrite) 100 mL IC-NO2-1X-1 $ 15 IC-NO2-2X-1 $ 25 IC-NO2-10X-1 $ 45500 mL IC-NO2-1X-5 55 IC-NO2-2X-5 60 IC-NO2-10X-5 70NO 3 (Nitrate) 100 mL IC-NO3-1X-1 $ 15 IC-NO3-2X-1 $ 25 IC-NO3-10X-1 $ 45500 mL IC-NO3-1X-5 55 IC-NO3-2X-5 60 IC-NO3-10X-5 70Br (Bromide) 100 mL IC-BR-1X-1 $ 15 IC-BR-2X-1 $ 25 IC-BR-10X-1 $ 45500 mL IC-BR-1X-5 55 IC-BR-2X-5 60 IC-BR-10X-5 70PO 4 (Phosphate) 100 mL IC-PO4-1X-1 $ 15 IC-PO4-2X-1 $ 25 IC-PO4-10X-1 $ 45500 mL IC-PO4-1X-5 55 IC-PO4-2X-5 60 IC-PO4-10X-5 70SO 4 (Sulfate) 100 mL IC-SO4-1X-1 $ 15 IC-SO4-2X-1 $ 25 IC-SO4-10X-1 $ 45500 mL IC-SO4-1X-5 55 IC-SO4-2X-5 60 IC-SO4-10X-5 70Ion Chrom - Anion Kits (Water Matrix)Unit Anion Conc. Kit Anion Conc. Kit Anion Conc. Kit100 µg/mL Price 200 µg/mL Price 1000 µg/mL PriceICKit Price SAVE 25% 100 mL IC-AN-KIT-1X-1 $ 75 IC-AN-KIT-2X-1 $ 130 IC-AN-KIT-10X-1$ 235Kit = one bottle of each analyte 7 x 100 mL 7 x 100 mL 7 x 100 mLIC-F-1X-1 IC-Cl-1X-1 IC-F-2X-1 IC-Cl-2X-1 IC-F-10X-1 IC-Cl-10X-1IC-NO2-1X-1 IC-NO3-1X-1 IC-NO2-2X-1 IC-NO3-2X-1 IC-NO2-10X-1 IC-NO3-10X-1IC-BR-1X-1 IC-PO4-1X-1 IC-BR-2X-1 IC-PO4-2X-1 IC-BR-10X-1 IC-PO4-10X-1IC-SO4-1X-1 IC-SO4-2X-1 IC-SO4-10X-1Kit Price SAVE 25% 500 mL IC-AN-KIT-1X-5 $ 285 IC-AN-KIT-2X-5 $ 315 IC-AN-KIT-10X-5$ 365Kit = one bottle of each analyte 7 x 500 mL 7 x 500 mL 7 x 500 mLIC-F-1X-5 IC-Cl-1X-5 IC-F-2X-5 IC-Cl-2X-5 IC-F-10X-5 IC-Cl-10X-5IC-NO2-1X-5 IC-NO3-1X-5 IC-NO2-2X-5 IC-NO3-2X-5 IC-NO2-10X-5 IC-NO3-10X-5IC-BR-1X-5 IC-PO4-1X-5 IC-BR-2X-5 IC-PO4-2X-5 IC-BR-10X-5 IC-PO4-10X-5IC-SO4-1X-5 IC-SO4-2X-5 IC-SO4-10X-576 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Ion ChromatographyAnion MixturesICAnion MixesAnion Mix #1IC-MAN-01-1 $ 100 / 100 mLWater Matrix5 comps.F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLNO 3 (Nitrate) 100 µg/mLPO 4 (Phosphate) 150 µg/mLSO 4 (Sulfate) 150 µg/mLAnion Mix #2IC-MAN-02-1 $ 115 / 100 mLWater Matrix6 comps.F (Fluoride) 100 µg/mLCl (Chloride) 200 µg/mLBr (Bromide) 400 µg/mLNO 3 (Nitrate) 400 µg/mLPO 4 (Phosphate) 600 µg/mLSO 4 (Sulfate) 400 µg/mLAnion Mix #3IC-MAN-03-1Water MatrixF (Fluoride)Cl (Chloride)SO 4 (Sulfate)Anion Mix #4IC-MAN-04-1 $ 115 / 100 mLWater Matrix6 comps.F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLBr (Bromide) 100 µg/mLNO 3 (Nitrate) 100 µg/mLPO 4 (Phosphate) 100 µg/mLSO 4 (Sulfate) 100 µg/mLAnion Mix #5IC-MAN-05-SET $ 100 / 2 x 100 mLIC-MAN-05-R1-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride) 10 µg/mLCl (Chloride) 20 µg/mLBr (Bromide) 20 µg/mLNO 3 (Nitrate) 20 µg/mLPO 4 (Phosphate) 5 µg/mLSO 4 (Sulfate) 30 µg/mLIC-NO2-0.2X-1100 mLNO 2 (Nitrite) 20 µg/mLAnion Mix #6IC-MAN-06-SET $ 100 / 2 x 100 mLIC-MAN-06-R1-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride)1 µg/mLCl (Chloride) 5 µg/mLBr (Bromide) 5 µg/mLNO 3 (Nitrate) 5 µg/mLPO 4 (Phosphate) 5 µg/mLSO 4 (Sulfate) 10 µg/mLIC-NO2-0.05X-1 100 mLNO 2 (Nitrite)5 µg/mLIon Chrom Standards$ 75 / 100 mL3 comps.Technical Note100 µg/mL100 µg/mL100 µg/mLIn order to enhance the shelf life andlong term stability of our IC products.AccuStandard has split the Nitrite outof mixes that contain Nitrate.Anion Mix #7IC-MAN-07-SET $ 100 / 2 x 100 mLIC-MAN-07-R1-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride)1 µg/mLCl (Chloride) 10 µg/mLBr (Bromide) 10 µg/mLNO 3 (Nitrate) 10 µg/mLPO 4 (Phosphate) 10 µg/mLSO 4 (Sulfate) 10 µg/mLIC-NO2-0.1X-1100 mLNO 2 (Nitrite) 10 µg/mLAnion Mix #8IC-MAN-08-SET $ 100 / 2 x 100 mLIC-MAN-08-R1-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride) 10 µg/mLCl (Chloride) 20 µg/mLBr (Bromide) 20 µg/mLNO 3 (Nitrate) 20 µg/mLPO 4 (Phosphate) 20 µg/mLSO 4 (Sulfate) 20 µg/mLIC-NO2-0.2X-1100 mLNO 2 (Nitrite) 20 µg/mLAnion Mix #9IC-MAN-09-SET $ 100 / 2 x 100 mLIC-MAN-09-R1-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride) 20 µg/mLCl (Chloride) 40 µg/mLBr (Bromide) 40 µg/mLNO 3 (Nitrate) 40 µg/mLPO 4 (Phosphate) 40 µg/mLSO 4 (Sulfate) 40 µg/mLIC-NO2-0.4X-1100 mLNO 2 (Nitrite) 40 µg/mLAnion Mix #10IC-MAN-10-SET $ 100 / 2 x 100 mLIC-MAN-10-R1-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride) 25 µg/mLCl (Chloride) 50 µg/mLBr (Bromide) 50 µg/mLNO 3 (Nitrate) 50 µg/mLPO 4 (Phosphate) 50 µg/mLSO 4 (Sulfate) 50 µg/mLIC-NO2-0.5X-1100 mLNO 2 (Nitrite) 50 µg/mLIC-MAN-CAL-SET $ 395 / 9 x 100 mLContains one each of:CLP-BLW-5 (500 mL)IC-MAN-07-SET IC-MAN-09-SETIC-MAN-08-SET IC-MAN-10-SETTechnical NoteThis Ready-to-Use set ofstandards can be used togenerate a 5 point calibrationcurve (including blank).Anion Mix #11IC-MAN-11-1 $ 175 / 100 mLWater Matrix5 comps.Cl (Chloride) 1000 µg/mLBr (Bromide) 1000 µg/mLNO 3 (Nitrate) 1000 µg/mLPO 4 (Phosphate) 1000 µg/mLSO 4 (Sulfate) 1000 µg/mLAnion Mix #12IC-MAN-12-1 $ 100 / 100 mLWater Matrix5 comps.Cl (Chloride) 15 µg/mLBr (Bromide) 15 µg/mLNO 3 (Nitrate) 15 µg/mLPO 4 (Phosphate) 15 µg/mLSO 4 (Sulfate) 15 µg/mLAnion Mix #13IC-MAN-13-1Water MatrixF (Fluoride)Cl (Chloride)SO 4 (Sulfate)Anion Mix #14$ 75 / 100 mL3 comps.25 µg/mL50 µg/mL100 µg/mLIC-MAN-14-SET $ 115 / 2 x 100 mLIC-MAN-14-R3-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLNO 3 (Nitrate) 100 µg/mLBr (Bromide) 100 µg/mLPO 4 (Phosphate) 150 µg/mLSO 4 (Sulfate) 150 µg/mLIC-NO2-1X-1 $ 15 / 100 mLNO 2 (Nitrite) 100 µg/mLIC-MAN-14-R2-SET is perfect forUS EPA Method 300.0Anion Mix #14 RevisedIC-MAN-14-R2-SET$ 115 / 2 x 100 mLIC-MAN-14-R2-1 $ 85 / 100 mLWater Matrix6 comps.F (Fluoride)20 µg/mLCl (Chloride)30 µg/mLBr (Bromide)100 µg/mLN-NO 3 (Nitrogen-Nitrate) 100 µg/mLP-PO 4 (Phosphorus-Phosphate) 150 µg/mLSO 4 (Sulfate)150 µg/mLIC-NO2-N-1X-1 $ 15 / 100 mLN-NO 2 (Nitrogen-Nitrite) 100 µg/mLAnion Mix #15IC-MAN-15R-SET $ 80 / 2 x 100 mLIC-MAN-15-R2-1 $ 70 / 100 mLWater Matrix3 comps.F (Fluoride) 100 µg/mLNO 3 (Nitrate) 100 µg/mLPO 4 (Phosphate) 100 µg/mLIC-NO2-1X-1 $ 15 / 100 mLNO 2 (Nitrite) 100 µg/mLAnion Mix #16IC-MAN-16-SET $ 115 / 2 x 100 mLIC-MAN-16-R1-1 $ 100 / 100 mLWater Matrix6 comps.F (Fluoride) 100 µg/mLCl (Chloride) 200 µg/mLBr (Bromide) 100 µg/mLNO 3 (Nitrate) 20 µg/mLPO 4 (Phosphate) 30 µg/mLSO 4 (Sulfate) 20 µg/mLIC-NO2-0.4X-1 $ 15 / 100 mLNO 2 (Nitrite) 40 µg/mLAnion Mix #17IC-MAN-17-SET $ 100 / 2 x 100 mLIC-MAN-17-R1-1 $ 85 / 100 mLWater Matrix5 comps.Cl (Chloride) 20 µg/mLBr (Bromide) 12 µg/mLNO 3 (Nitrate) 12 µg/mLPO 4 (Phosphate) 12 µg/mLSO 4 (Sulfate) 80 µg/mLIC-NO2-0.12X-1 100 mLNO 2 (Nitrite) 12 µg/mLAnion Mix #18IC-MAN-18-SET $ 115 / 2 x 100 mLIC-MAN-18-R1-1 $ 85 / 100 mLWater Matrix5 comps.F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLNO 3 (Nitrate) 100 µg/mLPO 4 (Phosphate) 100 µg/mLSO 4 (Sulfate) 100 µg/mLIC-NO2-1X-1 $ 15 / 100 mLNO 2 (Nitrite) 100 µg/mLDon't see the solution you need ?Use our Custom Quotation FAX Form in theback of the catalog and take advantage ofour technical experience to help youformulate the solutions for your problems.ICFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com77


ICIon ChromatographyIon Chrom - Cation Singles (Dilute HNO 3 Matrix)Used for Influent & Effluent monitoring in aqueous matrices byASTM & other EPA Methods in the Petrochemical IndustrySymbol (Element) Unit 100 µg/mL Price 200 µg/mL Price 1000 µg/mL PriceCa (Calcium) 100 mL IC-CA-1X-1 $ 15 IC-CA-2X-1 $ 25 IC-CA-10X-1 $ 45500 mL IC-CA-1X-5 55 IC-CA-2X-5 60 IC-CA-10X-5 70NH 4 (Ammonium) 100 mL IC-NH4-1X-1 $ 15 IC-NH4-2X-1 $ 25 IC-NH4-10X-1 * $ 45500 mL IC-NH4-1X-5 55 IC-NH4-2X-5 60 IC-NH4-10X-5 * 70Mg (Magnesium) 100 mL IC-MG-1X-1 $ 15 IC-MG-2X-1 $ 25 IC-MG-10X-1 $ 45500 mL IC-MG-1X-5 55 IC-MG-2X-5 60 IC-MG-10X-5 70K (Potassium) 100 mL IC-K-1X-1 $ 15 IC-K-2X-1 $ 25 IC-K-10X-1 $ 45500 mL IC-K-1X-5 55 IC-K-2X-5 60 IC-K-10X-5 70Na (Sodium) 100 mL IC-NA-1X-1 $ 15 IC-NA-2X-1 $ 25 IC-NA-10X-1 $ 45500 mL IC-NA-1X-5 55 IC-NA-2X-5 60 IC-NA-10X-5 70Li (Lithium) 100 mL IC-LI-1X-1 $ 15 IC-LI-2X-1 $ 25 IC-LI-10X-1 $ 45500 mL IC-LI-1X-5 55 IC-LI-2X-5 60 IC-LI-10X-5 70Ba (Barium) 100 mL IC-BA-1X-1 $ 15 IC-BA-2X-1 $ 25 IC-BA-10X-1 $ 45500 mL IC-BA-1X-5 55 IC-BA-2X-5 60 IC-BA-10X-5 70Sr (Strontium) 100 mL IC-SR-1X-1 $ 15 IC-SR-2X-1 $ 25 IC-SR-10X-1 $ 45500 mL IC-SR-1X-5 55 IC-SR-2X-5 60 IC-SR-10X-5 70* These Standards are 1,000 µg/mL as Ammonium (NH 4 )Other Nitrogen species equivalents are: NH 3 (Ammonia) = 944 µg/mL N (Nitrogen) = 776 µg/mLIon Chrom - Cation Kits (Dilute HNO 3 Matrix)Unit 100 µg/mL Price 200 µg/mL Price 1000 µg/mL PriceKit Price SAVE 25% 100 mL IC-CAT-KIT-1X-1 $ 75 IC-CAT-KIT-2X-1 $ 130 IC-CAT-KIT-10X-1 $ 235Kit = one bottle of each analyte 8 x 100 mL 8 x 100 mL 8 x 100 mLIC-CA-1X-1 IC-NH4-1X-1 IC-CA-2X-1 IC-NH4-2X-1 IC-CA-10X-1 IC-NH4-10X-1IC-MG-1X-1 IC-K-1X-1 IC-MG-2X-1 IC-K-2X-1 IC-MG-10X-1 IC-K-10X-1IC-NA-1X-1 IC-LI-1X-1 IC-NA-2X-1 IC-LI-2X-1 IC-NA-10X-1 IC-LI-10X-1IC-BA-1X-1 IC-SR-1X-1 IC-BA-2X-1 IC-SR-2X-1 IC-BA-10X-1 IC-SR-10X-1Kit Price SAVE 25% 500 mL IC-CAT-KIT-1X-5 $ 285 IC-CAT-KIT-2X-5 $ 315 IC-CAT-KIT-10X-5 $ 365Kit = one bottle of each analyte 8 x 500 mL 8 x 500 mL 8 x 500 mLIC-CA-1X-5 IC-NH4-1X-5 IC-CA-2X-5 IC-NH4-2X-5 IC-CA-10X-5 IC-NH4-10X-5IC-MG-1X-5 IC-K-1X-5 IC-MG-2X-5 IC-K-2X-5 IC-MG-10X-5 IC-K-10X-5IC-NA-1X-5 IC-LI-1X-5 IC-NA-2X-5 IC-LI-2X-5 IC-NA-10X-5 IC-LI-10X-5IC-BA-1X-5 IC-SR-1X-5 IC-BA-2X-5 IC-SR-2X-5 IC-BA-10X-5 IC-SR-10X-5Cation MixesIon Chrom StandardsICCation Mix #1IC-MCA-01-1Dilute HNO 3Ca (Calcium) 1000 µg/mLNH 4 (Ammonium) 400 µg/mLMg (Magnesium) 200 µg/mL$ 150 / 100 mL6 comps.K (Potassium) 200 µg/mLNa (Sodium) 200 µg/mLLi (Lithium) 50 µg/mLCation Mix #3IC-MCA-03-1 $ 100 / 100 mLDilute HNO 34 comps.Ca (Calcium) 100 µg/mLNH 4 (Ammonium) 100 µg/mLNa (Sodium) 50 µg/mLLi (Lithium) 10 µg/mLCation Mix #5IC-MCA-05-1Dilute HNO 3NH 4 (Ammonium)K (Potassium)Na (Sodium)Li (Lithium)3 µg/mL6 µg/mL3 µg/mL0.5 µg/mL$ 125 / 100 mL4 comps.Cation Mix #2IC-MCA-02-1Dilute HNO 3$ 125 / 100 mL6 comps.Cation Mix #4IC-MCA-04-1 $ 125 / 100 mLDilute HNO 34 comps.Cation Mix #6IC-MCA-06-1Dilute HNO 3$ 125 / 100 mL6 comps.Ca (Calcium) 100 µg/mLNH 4 (Ammonium) 100 µg/mLMg (Magnesium) 100 µg/mLK (Potassium) 100 µg/mLNa (Sodium) 100 µg/mLLi (Lithium) 100 µg/mLCa (Calcium)Mg (Magnesium)Ba (Barium)Sr (Strontium)400 µg/mL200 µg/mL1600 µg/mL600 µg/mLCa (Calcium) 2 µg/mLNH 4 (Ammonium) 1.5 µg/mLMg (Magnesium) 2 µg/mLK (Potassium)Na (Sodium)Li (Lithium)2.5 µg/mL1.5 µg/mL0.2 µg/mL78 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Ion ChromatographyICIon Chrom Eluents0.5 M Sodium bicarbonate 50 mL $ 45 100 mL $ 60 5 x 50 mL $ 135 5 x 100 mL $ 250(100X concentrate) IC-ELU-01-0.5 IC-ELU-01-1 IC-ELU-01-0.5-PAK IC-ELU-01-1-PAK0.5 M Sodium carbonate 50 mL $ 45 100 mL $ 60 5 x 50 mL $ 135 5 x 100 mL $ 250(100X concentrate) IC-ELU-02-0.5 IC-ELU-02-1 IC-ELU-02-0.5-PAK IC-ELU-02-1-PAK0.18 M Sodium carbonate/ 50 mL $ 25 100 mL $ 30 5 x 50 mL $ 60 5 x 100 mL $ 1150.17 M Sodium bicarbonate IC-ELU-03-0.5 IC-ELU-03-1 IC-ELU-03-0.5-PAK IC-ELU-03-1-PAK(100X concentrate)Easy to use, ready to diluteconcentrates. Open a freshbottle and dilute the volume(50 mL to 5 L or 100 mL to 10 L)and be assured of a freshuncontaminated mobile phase.EPA 300.0, ASTM Method D-4327Ion Chrom - Ion Singles as the ElementUnit 100 µg/mL Price 1000 µg/mL PriceNO 2 -N (Nitrite-Nitrogen) 100 mL IC-NO2-N-1X-1 $ 15 IC-NO2-N-10X-1 $ 45Water Matrix 500 mL IC-NO2-N-1X-5 55 IC-NO2-N-10X-5 70NO 3 -N (Nitrate-Nitrogen) 100 mL IC-NO3-N-1X-1 $ 15 IC-NO3-N-10X-1 $ 45Water Matrix 500 mL IC-NO3-N-1X-5 55 IC-NO3-N-10X-5 70PO 4 -P (Phosphate-Phosphorous) 100 mL IC-PO4-P-1X-1 $ 15 IC-PO4-P-10X-1 $ 45Water Matrix 500 mL IC-PO4-P-1X-5 55 IC-PO4-P-10X-5 70SO 4 -S (Sulfate-Sulfur) 100 mL IC-SO4-S-1X-1 $ 15 IC-SO4-S-10X-1 $ 45Water Matrix 500 mL IC-SO4-S-1X-5 55 IC-SO4-S-10X-5 70NH 4 -N (Ammonium-Nitrogen) 100 mL IC-NH4-N-1X-1 $ 15 IC-NH4-N-10X-1 $ 45Water Matrix 500 mL IC-NH4-N-1X-5 55 IC-NH4-N-10X-5 70Recommended product for EPA Method 300.0“Determination of Inorganic Anions by IonChromatography” and ASTM D-4327-91, “TestMethod for Anions in Water by ChemicallySuppressed Ion Chromatography.”Anion Singles KitsIC-AN-KIT-R-10X-1 $ 235 / 7 x 100 mLEach at 1000 µg/mLIC-F-10X-1 FluorideIC-Cl-10X-1 ChlorideIC-NO2-N-10X-1 Nitrite-NitrogenIC-NO3-N-10X-1 Nitrate-NitrogenIC-BR-10X-1 BromideIC-PO4-P-10X-1 Phosphate-PhosphorousIC-SO4-S-10X-1 Sulfate-SulfurIC-AN-KIT-R-10X-5Each at 1000 µg/mLIC-F-10X-5IC-Cl-10X-5IC-NO2-N-10X-5IC-NO3-N-10X-5IC-BR-10X-5IC-PO4-P-10X-5IC-SO4-S-10X-5$ 365 / 7 x 500 mLFluorideChlorideNitrite-NitrogenNitrate-NitrogenBromidePhosphate-PhosphorousSulfate-SulfurAnion Mix #14 RevisedIC-MAN-14-R2-SET $ 115 / 2 x 100 mLIC-MAN-14-R2-1100 mLWater Matrix6 comps.F (Fluoride)20 µg/mLCl (Chloride)30 µg/mLBr (Bromide)100 µg/mLN-NO 3 (Nitrogen-Nitrate) 100 µg/mLP-PO 4 (Phosphorus-Phosphate) 150 µg/mLSO 4 (Sulfate)150 µg/mLIC-NO2-N-1X-1100 mLN-NO 2 (Nitrogen-Nitrite)100 µg/mLOrganic Acid Salt StandardsUnit 100 µg/mL Price 1000 µg/mL PriceFormate 100 mL IC-FORM-1X-1 $ 15 IC-FORM-10X-1 $ 45Water Matrix 500 mL IC-FORM-1X-5 55 IC-FORM-10X-5 70Acetate 100 mL IC-ACET-1X-1 $ 15 IC-ACET-10X-1 $ 45Water Matrix 500 mL IC-ACET-1X-5 55 IC-ACET-10X-5 70Oxalate 100 mL IC-OXAL-1X-1 $ 15 IC-OXAL-10X-1 $ 45Water Matrix 500 mL IC-OXAL-1X-5 55 IC-OXAL-10X-5 70Chlorate 100 mL IC-CHLR-1X-1 $ 15 IC-CHLR-10X-1 $ 45Water Matrix 500 mL IC-CHLR-1X-5 55 IC-CHLR-10X-5 70Chromate 100 mL IC-CHRM-1X-1 $ 15 IC-CHRM-10X-1 $ 45Water Matrix 500 mL IC-CHRM-1X-5 55 IC-CHRM-10X-5 70ICFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com79


On-Line OrderingThere is an easier way to get Chemical Reference Standardse-Standards ® from AccuStandard.com5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 30,000 products.Search by:Catalog NumberSingle or Multiple Components,Method (EPA, ASTM, etc.)Chemical Category (Organic, Inorganic, Petroleum, etc.)Other Companies’ Part NumberLog on to www.accustandard.com and see how easy it is.Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply to online orders, seedetails on website.On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need, we can prepare Custom Formulationsand Custom Packaging for both Organic and Inorganic needs.See our Website for more info.Over 30,000 Standardsjust a click awayCustom FormulationsICAccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a customformulation. Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. Tomake an inquiry for Custom Quotes visit our website.You can also Email your requirements to techservice@accustandard.com or Fax us at 203-786-5287. Please include the followinginformation: List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (millilitersper ampule, bottle, or vial).Quality Control Options1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (whereavailable). Every component in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. Thesolutions are made up to volume using class A glassware. A certificate comes with each standard and documents the gravimetricvalues used.2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plusstatistical analysis. A data package is provided containing analytical and gravimetric data (Organic customs only).Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.80


LUFT/LUST StandardsState MethodsAlaska 82-84GRO HydrocarbonsDRO HydrocarbonsRRO HydrocarbonsArizona 85Diesel RangeCalifornia 85GasolineConnecticut 85Extractable TPHFlorida 86FTRPHMassachusetts 87-88EPHVPHMississippi 86DROMulti-State 86Hydrocarbon Window DefiningPensylvania 89Storage Tank Monitoring StandardsTennessee 86DROTexas 89Method 1005 (PST)Washington 90-91VPHEPHWisconsin 91Gasoline Range HydrocarbonsLUFT/LUSTTPH Pattern Recognition Standards 92-93Weathered LUFT/LUST Fuel Standards 93Gasoline Range HC Analysis (CA, PA, WI) 94Diesel Range HC Analysis 95ASTM Method D-2887 95Complete Hydrocarbon Analysis 95Proficiency Test Samples 96Method 1664, Oil, Grease & TPH Analysis 97Methods 413.2, 418.1 & TPH Analysis 97Method 8440 TPH Analysis 97Method 1004 Alcohol Oxidation Products in Engine Exhaust 98ASTM E-1387 and E-1618 for Fire Debris Analysis 98Skinner List Refinery Waste (ASTM#E1387) 98LUFT/LUSTFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com81


LUFT/LUSTAlaskaAlaska MethodLUFT/LUST StandardsState MethodsDetermination of Gasoline Range Organic (GRO) HydrocarbonsNormal Alkane Standard - GRO Defining MixtureAK-101.0-NAS-10X$ 20 / 1 x 1 mLAK-101.0-NAS-10X-PAKSAVE 20% $ 80 / 5 x 1 mL2.0 mg/mL each in MeOH 5 comps.n-Hexanen-Heptanen-OctaneLaboratory Control StandardAK-101.0-LCSAK-101.0-LCS-PAK5.0 mg/mL in MeOHGasoline - Regular, unleadedn-Nonanen-DecaneCertified BTEX in Unleaded Gasoline(Single Source)GA-001-20X-BTEX10.0 mg/mL in MeOHGasoline - Regular, unleaded$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mL$ 55 / 1 x 1 mLTechnical NotesLaboratory Control StandardThe Gasoline Laboratory Control Standard was taken from an ASTMselected fuel set and a source independent of what is being used inthe Gasoline Composite Mix.Simultaneous BTEX / Gasoline QA/QCAccuStandard's QA/QC Department has certified the benzene,toluene, ethyl benzene and xylene concentrations in our unleadedgasoline standard (GA-001-20X-BTEX & in AK-101.0-GCS-BTEX).Use of either standard allows the analytical chemist in a singleinjection to verify that the QA/QC requirements are being met for theBTEX analytes as well as for the gasoline.Since formulating the standards for the Alaskan method, andbecause of numerous laboratory requests, we have added a newmulti source certified BTEX in gasoline composite mix (AK-101.0-GCS-BTEX). The BTEX values for this multi-source calibrationstandard have been determined through in-house analysis against aBTEX multi level calibration curve, and are listed in the Certificate.AccuStandard continues to look for innovative approaches to savethe analytical laboratory time and money.Certified BTEX in Gasoline Composite Mix(Multi Source) see Technical NoteAK-101.0-GCS-BTEX$ 55 / 1 x 1 mL5 mg/mL total in MeOH 3 comps.Gasoline - Premium (1.66 mg/mL)Gasoline - Regular, leaded (1.67 mg/mL)Gasoline - Regular, unleaded (1.67 mg/mL)Surrogate Control StandardAK-101.0-SS$ 10 / 1 x 1 mLAK-101.0-SS-PAKSAVE 20% $ 40 / 5 x 1 mL50 µg/mL each in MeOHAK-101.0-SS-10X$ 20 / 1 x 1 mLAK-101.0-SS-10X-PAKSAVE 20% $ 80 / 5 x 1 mL500 µg/mL each in MeOHAK-101.0-SS-100X$ 20 / 1 x 1 mLAK-101.0-SS-100X-PAKSAVE 20% $ 80 / 5 x 1 mL5,000 µg/mL each in MeOH 2 comps.p-Bromofluorobenzenea,a,a-TrifluorotolueneGasoline Calibration Composite MixtureAK-101.0-GCSAK-101.0-GCS-PAKTotal 5.0 mg/mL in MeOHGasoline - Premium (1.66 mg/mL)Gasoline - Regular, leaded (1.67 mg/mL)Gasoline - Regular, unleaded (1.67 mg/mL)Gasoline Calibration Mix Version 4/02AK-101-GSC-R1AK-101-GSC-R1-PAKEqual parts by weight of eachGasoline - Regular, unleadedGasoline - Plus, unleadedGasoline - Premium, unleadedInternal StandardAK-101.0-IS-10XAK-101.0-IS-10X-PAK2.0 mg/mL in MeOH1-Chloro-4-fluorobenzene$ 25 / 1 x 1 mLSAVE 20% $ 100 / 5 x 1 mL3 comps.NEW$ 25 / 1 x 1 mLSAVE 20% $ 100 / 5 x 1 mL$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mLAlaska MethodDetermination of Aromatic & Aliphatic Hydrocarbons in Gasoline Range OrganicsLUFT/LUSTAK101AA Aromatics MixAK-101AA-ARO$ 30 / 1 x 1 mLAK-101AA-ARO-PAKSAVE 20% $ 120 / 5 x 1 mL2000 µg/mL each in MeOH 14 comps.BenzeneTolueneEthylbenzenem-Xylenep-Xyleneo-Xylene1,2,3-Trimethylbenzene1,2,4-Trimethylbenzene1,3,5-TrimethylbenzeneIsopropylbenzenem-Ethyltoluenep-Ethyltolueneo-Ethyltoluenen-Propylbenzene82 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUSTLUFT/LUST StandardsState MethodsLUFT/LUSTAlaskaAlaska MethodDetermination of Diesel Range Organic (DRO) HydrocarbonsDiesel Calibration Composite Mixture (low sulfur)AK-102.0-DCS$ 25 / 1 x 1 mLAK-102.0-DCS-PAKSAVE 20% $ 100 / 5 x 1 mLTotal 5.0 mg/mL in CH 2 Cl 23 comps.Diesel Fuel, Arctic (1.66 mg/mL) #2 Diesel - extra Low Sulfur (1.67 mg/mL)#1 Diesel - Low Sulfur (1.67 mg/mL)AK-102.0-DCS-10X$ 40 / 1 x 1 mLAK-102.0-DCS-10X-PAKSAVE 20% $ 160 / 5 x 1 mLTotal 50.0 mg/mL in CH 2 Cl 23 comps.Diesel Fuel, Arctic (16.6 mg/mL) #2 Diesel - extra Low Sulfur (16.7 mg/mL)#1 Diesel - Low Sulfur (16.7 mg/mL)Laboratory Control Standard (low sulfur)AK-102.0-LCS$ 10 / 1 x 1 mLAK-102.0-LCS-PAKSAVE 20% $ 40 / 5 x 1 mL5.0 mg/mL in AcetoneAK102.0-LCS-10X$ 20 / 1 x 1 mLAK-102.0-LCS-10X-PAKSAVE 20% $ 80 / 5 x 1 mL50.0 mg/mL in Acetone#2 Diesel - extra Low SulfurStock Concentrate Diesel CalibrationComposite MixtureAK-102.0-DCS-R1-10X$ 40 / 1 x 1 mLAK-102.0-DCS-R1-10X-PAK SAVE 20% $ 160 / 5 x 1 mLTotal 50.0 mg/mL in CH 2 Cl 23 comps.Diesel Fuel, Arctic (16.6 mg/mL)#1 Diesel - Low Sulfur (16.7 mg/mL)Laboratory Control StandardAK-102.0-LCS-R1-10X$ 20 / 1 x 1 mLAK-102.0-LCS-R1-10X-PAK SAVE 20% $ 80 / 5 x 1 mL50.0 mg/mL in Acetone#2 Diesel - ConventionalTechnical Note#2 Diesel - Conventional (16.7 mg/mL)The Laboratory Control Standard was prepared from anindependent source of material than what was used in the DieselCalibration Composite mix.Technical NoteAccuStandard originally formulated the Diesel Calibration Composite Mix and Laboratory Control Standard using two independent sourcesof #2 Diesel as required by the Alaskan method. Unfortunately, the chromatographic patterns for the #2 diesel sources (conventional &extra low sulfur) are different.We have actively sought out and obtained independent sources of each type of #2 diesel to insure similar chromatographic patterns . Werecommend that when a customer is analyzing the Diesel Calibration Composite and Laboratory Control standard that the client ordersAK-102.0-DCS & AK-102.0-LCS products together to obtain similar chromatographic patterns for #2 diesel extra low sulfur patterns andAK-102.0-DCS-R1-10X & AK-102.0-LCS-R1-10X products to obtain similar chromatographic patterns for #2 Diesel conventional patterns.We believe most laboratories performing the Alaskan DRO analysis will find the #2 Diesel conventional chromatographic pattern moreclosely resembles typical Diesel samples drawn from environmental sites.Normal Alkane Standard - DRO Defining MixtureAK-102.0-NAS-10X$ 40 / 1 x 1 mLAK-102.0-NAS-10X-PAKSAVE 20% $ 160 / 5 x 1 mL2.0 mg/mL each in CH 2 Cl 2 16 comps.n-Decanen-Undecanen-Dodecanen-Tridecanen-Tetradecanen-Pentadecanen-Hexadecanen-Heptadecanen-Octadecanen-Nonadecanen-Eicosanen-Heneicosanen-Docosanen-Tricosanen-Tetracosanen-PentacosaneSurrogate StandardsAK-102.0-SSAK-102.0-SS-PAK200 µg/mL in AcetoneAK102.0-SS-10XAK102.0-SS-10X-PAK2.0 mg/mL in Acetoneo-TerphenylInternal StandardAK-102.0-ISAK-102.0-IS-PAK1.0 mg/mL in CH 2 Cl 25-alpha Androstane$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mL$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mL$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com83


LUFT/LUSTAlaskaLUFT/LUST StandardsState MethodsAlaska MethodDetermination of Aromatic & Aliphatic Hydrocarbons in Diesel Range OrganicsAK102AA DRO StandardAK-102AA-DRO$ 40 / 1 x 1 mLAK-102AA-DRO-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH 2 Cl 2 10 comps.n-Undecanen-Pentadecanen-Heptadecanen-Octadecanen-TetracosaneNaphthaleneAcenaphtheneFluorenePyreneAnthraceneAK102/103AA Retention TimeMarker StandardAK-102/103AA-RT$ 25 / 1 x 1 mLAK-102/103AA-RT-PAK $ 100 / 5 x 1 mL50 µg/mL each in CH 2 Cl 2 3 comps.n-Decanen-Pentacosanen-HexatriacontaneAK102/103AA Surrogate StandardAK-102/103AA-SS$ 35 / 1 x 1 mLAK-102/103AA-SS-PAK SAVE 20% $ 140 / 5 x 1 mL1000 µg/mL each in CH 2 Cl 2 3 comps.Squalaneo-Terphenyl5,6,7,8-Tetrahydro-1-naphtholAlaska MethodDetermination of Residual Range Organics (RRO) HydrocarbonResidual Composite MixturesAK-103.0-RCS$ 25 / 1 x 1 mLAK-103.0-RCS-PAKSAVE 20% $ 100 / 5 x 1 mLTotal 5.0 mg/mL in CH 2 Cl 23 comps.SAE 30W Motor Oil(1.66 mg)SAE 40W Motor Oil(1.67 mg)SAE 50W Motor Oil(1.67 mg)Laboratory Control StandardAK-103.0-LCSAK-103.0-LCS-PAK5.0 mg/mL in AcetoneAK-103.0-LCS-5XAK-103.0-LCS-5X-PAK25.0 mg/mL in Acetone: CH 2 Cl 2 (1:1)SAE 40W Motor Oil$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mL$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mLAK-103.0-RCS-10XAK-103.0-RCS-10X-PAKTotal 50.0 mg/mL in CH 2 Cl 2SAE 30W Motor OilSAE 40W Motor OilSAE 50W Motor Oil$ 40 / 1 x 1 mLSAVE 20% $ 160 / 5 x 1 mL3 comps.(16.6 mg)(16.7 mg)(16.7 mg)Surrogate Control StandardAK-103.0-SSAK-103.0-SS-PAK500 µg/mL in AcetoneAK-103.0-SS-10XAK-103.0-SS-10X-PAK5.0 mg/mL in THF : Acetone (1:3)$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mL$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mLn-Triacontane-d 62Alaska MethodDetermination of Aromatic and Aliphatic Hydrocarbons in Residual Range OrganicsAK103AA RRO StandardAK-103AA-RRO$ 35 / 1 x 1 mLAK-103AA-RRO-PAKSAVE 20% $ 140 / 5 x 1 mL50 µg/mL each in CH 2 Cl 2 9 comps.n-Hexacosanen-Octacosanen-Triacontanen-Dotriacontanen-TetratriacontaneBenzo[b]fluorantheneBenzo[a]pyreneBenzo[g,h,i]peryleneDibenz[a,h]anthraceneAK102/103AA Retention TimeMarker StandardAK-102/103AA-RT$ 25 / 1 x 1 mLAK-102/103AA-RT-PAK SAVE 20% $ 100 / 5 x 1 mL50 µg/mL each in CH 2 Cl 2 3 comps.n-Decanen-Pentacosanen-HexatriacontaneAK102/103AA Surrogate StandardAK-102/103AA-SS$ 35 / 1 x 1 mLAK-102/103AA-SS-PAK SAVE 20% $ 140 / 5 x 1 mL1000 µg/mL each in CH 2 Cl 2 3 comps.Squalaneo-Terphenyl5,6,7,8-Tetrahydro-1-naphtholLUFT/LUST84 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsState MethodsLUFT/LUSTArizonaCaliforniaConnecticutArizona MethodDetermination of Diesel Range and Oil Range Organic HydrocarbonsDiesel & Oil Range StandardAZ-8015-DRO/ORO$ 40 / 1 x 1 mLAZ-8015-DRO/ORO-PAKSAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH 2 Cl 2 12 comps.n-Decanen-Dodecanen-Docosanen-DotriacontaneSurrogate StandardsAK-102.0-SS-10XAK-102.0-SS-10X-PAK2.0 mg/mL in Acetoneo-Terphenyln-Eicosanen-Hexacosanen-Hexadecanen-Octacosanen-Octadecanen-Tetracosanen-Tetradecanen-Triacontane$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLRetention Time Verification StandardAZ-8015-RTV$ 25 / 1 x 1 mLAZ-8015-RTV-PAKSAVE 20% $ 100 / 1 x 1 mL2000 µg/mL each in CH 2 Cl 2 3 comps.n-Decanen-DocosaneStock Calibration Standardn-DotriacontaneAZ-8015-SCS$ 40 / 1 x 1 mLAZ-8015-SCS-PAKSAVE 20% $ 160 / 1 x 1 mL10000 µg/mL each in CH 2 Cl 2 2 comps.#2 Diesel 10W 30 Motor OilCalifornia MethodCalifornia - Gasoline Range HydrocarbonsS-603A-10X$ 25 / 1 x 1 mLS-603A-10X-PAKSAVE 25% $ 90 / 5 x 1 mL2.0 mg/mL each in MeOH 7 comps.BenzeneEthylbenzeneMethyl t-butyl etherTolueneo-Xylenem-Xylenep-XyleneOxygenate Gasoline Additive StandardOGAD-001$ 30 / 1 x 1 mLOGAD-001-PAKSAVE 20% $ 120 / 5 x 1 mLAt stated conc. in MeOH5 comps.MtBE(2000 µg/mL) TAME(2000 µg/mL)ETBE(2000 µg/mL) t-Butanol (10000 µg/mL)Isopropyl ether (2000 µg/mL)LA County Well Investigation & Monitoring ProgramPurgeable Aromatics - Gasoline IDM-602-GAS-10X$ 30 / 1 x 1 mL2.0 mg/mL each in MeOH 11 comps.BenzeneChlorobenzene1,2-Dichlorobenzene1,3-Dichlorobenzene1,4-DichlorobenzeneEthylbenzeneTolueneo-Xylenep-Xylenem-XyleneMtBEEthanolM-8015B/5031-1110 mg/mL in WaterMethanolM-8015B/5031-1710 mg/mL in Water$ 25 / 1 x 1 mL$ 20 / 1 x 1 mLConnecticut MethodExtractable Total Petroleum HydrocarbonCT ETPH Alkane StandardDRH-009S$ 35 / 1 x 1 mLDRH-009S-PAKSAVE 20% $ 140 / 5 x 1 mL1000 µg/mL in CH 2 Cl 2 15 comps.n-Nonanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Eicosanen-Docosanen-Tetracosanen-HexacosaneTechnical Noten-Octacosanen-Triacontanen-Dotriacontanen-Tetratriacontanen-HexatriacontaneProficiency Test Samples required for the ETPH method andindividual fuels are available as standard products. Customformulations can be quoted and manufactured to meet yourspecific application.Surrogate StandardGRH-SSGRH-SS-PAK2.0 mg/mL in Acetoneo-Terphenyl (OTP)Internal StandardGRH-ISGRH-IS-PAK1.0 mg/mL in CH 2 Cl 25-alpha Androstane$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mL$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLLUFT/LUSTFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com85


LUFT/LUSTFloridaMiss/TennMulti-StateLUFT/LUST StandardsState MethodsFlorida MethodTotal Recoverable Petroleum Hydrocarbon (FTRPH) Standard & SurrogatesCalibration/Window Defining Hydrocarbon StandardDRH-004S-5X$ 50 / 1 x 1 mLDRH-004S-5X-PAKSAVE 20% $ 200 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 : CS 2 (1:1) 17 comps.Octane C 8Decane C 10Dodecane C 12Tetradecane C 14Hexadecane C 16Eicosane C 20Docosane C 22Tetracosane C 24Hexacosane C 26Octacosane C 28Triacontane C 30Dotriacontane C 32Tetratriacontane C 34Hexatricontane C 36Octatriacontane C 38Tetracontane C 40FTRPH Surrogate StandardDRH-FL-SS-3XDRH-FL-SS-3X-PAK3.0 mg/mL in Carbon disulfideDRH-FL-SSDRH-FL-SS-PAK1.0 mg/mL in Carbon disulfideNonatriacontane$ 25 / 1 x 1 mLSAVE 20% $ 100 / 5 x 1 mL$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mLFTRPH Calibration / Window Defining StandardDRH-FTRPH$ 35 / 1 x 1 mLDRH-FTRPH-PAKSAVE $ 150 / 5 x 1 mL500 µg/mL each in Hexane 17 comps.n-Octanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Eicosanen-Docosanen-Tetracosanen-Hexacosanen-Octacosanen-Triacontanen-Dotriacontanen-Tetratriacontanen-Hexatriacontanen-Octatriacontanen-TetracontaneFTRPH Combined Surrogate StandardDRH/GRH-FL-SS$ 50 / 1 x 1 mLDRH/GRH-FL-SS-PAKSAVE 20% $ 200 / 5 x 1 mL5.0 mg/mL in Carbon disulfide 2 comps.Nonatriacontaneo-Terphenyl (OTP)Internal StandardGRH-ISGRH-IS-PAK1.0 mg/mL in CH 2 Cl 25-alpha Androstane$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLSurrogate StandardsDRH-SSDRH-SS-PAK5.0 mg/mL in THF$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mLGRH-SSGRH-SS-PAK2.0 mg/mL in AcetoneOctadecane C 18AccuStandard offers a hydrocarbon window defining standard withTechnical NoteThe above FTRPH Calibration/Window Defining Standard wasformulated at a lower concentration to insure solubility of theanalytes & eliminate the odor caused by the introduction of Carbondisulfide as a cosolvent.The above FTRPH Surrogate Standard was formulated at ahigher concentration for combined DRH & GRH analysis. Thisstandard has proven useful for those laboratories performinggasoline & diesel analysis simultaneously.DRH/GRH-FL-SS-R2DRH/GRH-FL-SS-R2-PAKAt stated conc. in Carbon disulfideTechnical NoteNEW$ 50 / 1 x 1 mLSAVE 20% $ 200 / 5 x 1 mL2 comps.Nonatriacontane (6000 µg/mL)o-Terphenyl (OTP) (1500 µg/mL)Technical NoteItems in Carbon disulfide cannot ship by Air. Whenever possiblewe try to find an alternate solvent, however some long chainhydrocarbon will not go in solution or any other solvent.$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mLn-Triacontane-d 62o-Terphenyl (OTP)Mississippi / Tennessee MethodMulti-State MethodHydrocarbon Window DefiningLUFT/LUSTDRO Defining MixAK-102.0-NAS-10X$ 40 / 1 x 1 mLAK-102.0-NAS-10X-PAKSAVE 20% $ 160 / 5 x 1 mL2.0 mg/mL each in CH 2 Cl 2 16 comps.n-Decanen-Undecanen-Dodecanen-Tridecanen-Tetradecanen-Pentadecanen-Hexadecanen-Heptadecanen-Octadecanen-Nonadecanen-Eicosanen-Heneicosanen-Docosanen-Tricosanen-Tetracosanen-PentacosaneDRH-008S-R2$ 65 / 1 x 1 mLDRH-008S-R2-PAKSAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecaneHeptadecanePristaneOctadecanePhytaneNonadecaneEicosaneHeneicosaneDocosaneTricosaneTetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosaneTriacontanen-HentriacontaneDotriacontaneTritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontaneTechnical Notethe C 8 to C 40 odd and even alkanes. Use of this one standard shouldmeet the numerous state-to-state variations for hydrocarbonvalidation and reporting. As an added benefit, AccuStandard hasincluded Pristane and Phytane in the formulation. Again, use of thisone standard can meet numerous LUFT/LUST programs requiringthat the C 17 (Pristane) and C 18 (Phytane) ratio be used to estimatesubsurface degradation of fuel oil spills.86 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsState Methods - Ready-to-Inject Working Level EPH StandardsLUFT/LUSTMassachusettsMassachusetts MethodDetermination of Extractable Petroleum Hydrocarbons (EPH)Cat. No.DRH-006-CAL-40XDRH-006-CAL-20XDRH-006-CAL-10XDRH-006-CAL-4XDRH-006-CAL-1XAromatic Hydrocarbons Calibration SetDRH-006-CAL-SETAt stated conc. in CH 2 Cl 2Aliphatic Hydrocarbons Calibration SetDRH-007-CAL-SETAt stated conc. in CH 2 Cl 2$ 125 / 5 x 1 mL18 comps.Components Level 1 Level 2 Level 3 Level 4 Level 5(units in µg/mL) ( 1X ) ( 4X ) ( 10X ) ( 20X ) ( 40X )Acenaphthene 5 20 50 100 200Acenaphthylene 5 20 50 100 200Anthracene 5 20 50 100 200Benz[a]anthracene 5 20 50 100 200Benzo[a]pyrene 5 20 50 100 200Benzo[b]fluoranthene 5 20 50 100 200Benzo[g,h,i]perylene 5 20 50 100 200Benzo[k]fluoranthene 5 20 50 100 200Chrysene 5 20 50 100 200Dibenz[a,h]anthracene 5 20 50 100 200Fluoranthene 5 20 50 100 200Fluorene 5 20 50 100 200Indeno[1,2,3-cd]pyrene 5 20 50 100 2002-Methylnaphthalene 5 20 50 100 200Naphthalene 5 20 50 100 200Phenanthrene 5 20 50 100 200Pyrene 5 20 50 100 200o-Terphenyl (Surrogate) 5 20 50 100 200$ 125 / 5 x 1 mL15 comps.DEP (MA) - Aromatic HydrocarbonsDRH-006S$ 65 / 1 x 1 mLDRH-006S-PAKSAVE 20% $ 260 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 17 comps.AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChryseneTechnical NotesDibenz[a,h]anthraceneFluorantheneFluoreneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyreneHigh ConcentratesAccuStandard formulated two high concentration EPHstocks for laboratories that prepare in-house working levelsolutions.CCC Working LevelIn addition, AccuStandard received numerous requests toformulate Ready-to-Use working level aromatic andaliphatic calibration sets. AccuStandard's ProductDevelopment Team designed the two listed Calibrationsets to meet those requests.Custom/Bulk PackagingLarger volumes of Daily Continuing Calibration solutioncan be purchased by contacting our Technical ServiceDepartment.Cat. No.DRH-007-CAL-40XDRH-007-CAL-20XDRH-007-CAL-10XDRH-007-CAL-4XDRH-007-CAL-1XComponents Level 1 Level 2 Level 3 Level 4 Level 5(units in µg/mL) ( 1X ) ( 4X ) ( 10X ) ( 20X ) ( 40X )n-Nonane 5 20 50 100 200n-Decane 5 20 50 100 200n-Dodecane 5 20 50 100 200n-Tetradecane 5 20 50 100 200n-Hexadecane 5 20 50 100 200n-Octadecane 5 20 50 100 200n-Nonadecane 5 20 50 100 200n-Eicosane 5 20 50 100 200n-Docosane 5 20 50 100 200n-Tetracosane 5 20 50 100 200n-Hexacosane 5 20 50 100 200n-Octacosane 5 20 50 100 200n-Triacontane 5 20 50 100 200n-Hexatriacontane 5 20 50 100 2001-Chlorooctadecane (Surrogate) 5 20 50 100 200DEP (MA) - Aliphatic HydrocarbonsDRH-007S$ 40 / 1 x 1 mLDRH-007S-PAKSAVE 20% $ 160 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 : Hexane (1:1) 14 comps.n-Nonanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Nonadecanen-Eicosanen-Docosanen-Tetracosanen-Hexacosanen-Octacosanen-Triacontanen-HexatriacontaneAliphatic SurrogateDRH-007-SSDRH-007-SS-PAK1.0 mg/mL in Hexane1-Chlorooctadecane$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLEPH Surrogate SpikeDRH-MA-SS 20 µg/mL each in Acetone $ 10 / 1 x 1 mLDRH-MA-SS-10X 200 µg/mL each in Acetone $ 20 / 1 x 1 mLDRH-MA-SS-100X 2,000 µg/mL each in Acetone $ 20 / 1 x 1 mLDRH-MA-SS-100X-PAK 2,000 µg/mL each in Acetone $ 100 / 5 x 1 mL1-Chlorooctadecaneo-Terphenyl2 comps.EPH Matrix SpikeDRH-MA-MS 25 µg/mL in Acetone $ 20 / 1 x 1 mLDRH-MA-MS-PAK 25 µg/mL in Acetone SAVE 20% $ 80 / 5 x 1 mLDRH-MA-MS-10X 250 µg/mL in Acetone $ 30 / 1 x 1 mLDRH-MA-MS-10X-PAK 250 µg/mL in AcetoneSAVE 20% $ 120 / 5 x 1 mLDRH-MA-MS-40X 1,000 µg/mL in Acetone $ 30 / 1 x 1 mLDRH-MA-MS-40X-PAK 1,000 µg/mL in AcetoneSAVE 20% $ 120 / 5 x 1 mL10 comps.AcenaphtheneAnthraceneChrysenen-EicosaneNaphthalenen-Nonadecanen-Nonanen-OctacosanePyrenen-TetradecaneLUFT/LUSTFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com87


LUFT/LUSTMassachusettsLUFT/LUST StandardsState MethodsMassachusetts MethodDetermination of Extractable Petroleum Hydrocarbons (EPH) (Continued)DEP (MA) - Fractionation Surrogate SpikeDRH-MA-FSS-10ML 40 µg/mL in Hexane $ 25 / 1 x 10 mLDRH-MA-FSS-50X 2.0 mg/mL in Hexane $ 25 / 1 x 1 mLDRH-MA-FSS-50X-PAK 2.0 mg/mL in HexaneSAVE 20% $ 100 / 5 x 1 mL2 comps.2-Fluorobiphenyl2-BromonaphthaleneAromatic SurrogateDRH-006-SSDRH-006-SS-PAK1.0 mg/mL in CH 2 Cl 2o-Terphenyl$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLInternal StandardGRH-IS 1,000 µg/mL in CH 2 Cl 2 $ 15 / 1 x 1 mLGRH-IS-PAK 1,000 µg/mL in CH 2 Cl 2 SAVE 20% $ 60 / 5 x 1 mLGRH-IS-10X 10.0 mg/mL in CH 2 Cl 2 $ 30 / 1 x 1 mLCombined Aromatic/AliphaticMatrix Spike StandardDRH-MS-ASL$ 45 / 1 x 1 mLDRH-MS-ASL-PAKSAVE 20% $ 180 / 5 x 1 mL25 µg/mL each in Hexane 31 comps.AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChrysenen-DecaneDibenz[a,h]anthracenen-Docosanen-Dodecanen-EicosaneFluorantheneFluorenen-Hexacosanen-Hexadecanen-HexatriacontaneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenen-Nonadecanen-Nonanen-Octacosanen-OctadecanePhenanthrenePyrenen-Tetracosanen-Tetradecanen-Triacontane5-alpha AndrostaneMassachusetts MethodDetermination of Volatile Petroleum Hydrocarbons (VPH)Stock ConcentrateVolatile Petroleum Hydrocarbon MixGRH-004S-10XGRH-004S-10X-PAKAt stated conc. in MeOH$ 40 / 1 x 1 mLSAVE 20% $ 160 / 5 x 1 mL13 comps.Volatile Petroleum Hydrocarbonswith Surrogate StandardGRH-004S/SSGRH-004S/SS-PAKAt stated conc. in MeOH$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mL14 comps.Benzene (5.0 mg/mL)Ethylbenzene (5.0 mg/mL)Isooctane (15.0 mg/mL)2-Methylpentane (15.0 mg/mL)MtBE(15.0 mg/mL)Naphthalene (10.0 mg/mL)n-Nonane (10.0 mg/mL)n-Pentane(10.0 mg/mL)Toluene(15.0 mg/mL)1,2,4-Trimethylbenzene (10.0 mg/mL)o-Xylene(10.0 mg/mL)m-Xylene(10.0 mg/mL)p-Xylene(10.0 mg/mL)Benzene(500 µg/mL)2,5-Dibromotoluene(Surrogate) (1,000 µg/mL)Ethylbenzene(500 µg/mL)Isooctane(1,500 µg/mL)2-Methylpentane(1,500 µg/mL)MtBE(1,500 µg/mL)Naphthalene(1,000 µg/mL)n-Nonanen-PentaneToluene1,2,4-Trimethylbenzeneo-Xylenem-Xylenep-Xylene(1,000 µg/mL)(1,000 µg/mL)(1,500 µg/mL)(1,000 µg/mL)(1,000 µg/mL)(1,000 µg/mL)(1,000 µg/mL)LUFT/LUSTDEP (MA)-VPH Surrogate StandardGRH-004-SSGRH-004-SS-PAK50 µg/mL in MeOHGRH-004-SS-10XGRH-004-SS-10X-PAK500 µg/mL in MeOHGRH-004-SS-100XGRH-004-SS-100X-PAK5,000 µg/mL in MeOH2,5-DibromotolueneVPH Matrix SpikeGRH-004-MS$ 15 / 1 x 1 mLGRH-004-MS-PAK$ 60 / 5 x 1 mL50 µg/mL each in MeOH 8 comps.GRH-004-MS-10X$ 25 / 1 x 1 mLGRH-004-MS-10X-PAK$ 100 / 5 x 1 mL500 µg/mL each in MeOH 8 comps.GRH-004-MS-100X$ 25 / 1 x 1 mLGRH-004-MS-100X-PAK$ 100 / 5 x 1 mL5,000 µg/mL each in MeOH 8 comps.m-Xylenep-XyleneBenzeneEthylbenzeneMtBENaphthaleneTolueneo-Xylene$ 10 / 1 x 1 mLSAVE 20% $ 40 / 5 x 1 mL$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mL$ 20 / 1 x 1 mLSAVE 20% $ 80 / 5 x 1 mLCertified BTEX in Unleaded GasolineGA-001-20X-BTEX10.0 mg/mL in MeOHGasoline - Regular, unleadedTechnical Notes$ 55 / 1 x 1 mLCalibration CurveAnalytical chemists can easily develop the VPH Calibration Curveusing one AccuStandard primary dilution standard that includes thesurrogate.Simultaneous BTEX / Gasoline QA/QCAccuStandard's QA/QC department has certified the benzene,toluene, ethyl benzene and xylene concentrations in our unleadedgasoline standard (GA-001-20X-BTEX). Use of this standard allowsthe analytical chemist in a single injection to verify that the QA/QCrequirements are being met for the BTEX analytes as well as thegasoline.AccuStandard's Product Development Team continues to look forinnovative approaches to save the analytical laboratory time andmoney.88 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsState MethodsLUFT/LUSTPennTexasPennsylvania MethodStorage Tank Site Closure & Monitoring Petroleum StandardsPA Extractable PAH StandardDRH-PA-001$ 25 / 1 x 1 mLDRH-PA-001-PAKSAVE 20% $ 100 / 5 x 1 mL2000 µg/mL each in CH 2 Cl 2 5 comps.Benz[a]anthraceneBenzo[a]pyreneFluoreneNaphthalenePhenanthrenePA Volatile Petroleum StandardGRH-PA-001$ 25 / 1 x 1 mLGRH-PA-001-PAKSAVE 20% $ 100 / 5 x 1 mLAt stated conc. in MeOH9 comps.Benzene (1000 µg/mL) o-Xylene(1000 µg/mL)Ethylbenzene (1000 µg/mL) m-Xylene(1000 µg/mL)MtBE(2000 µg/mL) p-Xylene(1000 µg/mL)Naphthalene (1000 µg/mL) Isopropylbenzene (1000 µg/mL)Toluene (1000 µg/mL)Texas MethodStorage Tank (PST) Division - TX Method 1005 StandardsGasoline & Diesel Calibration SetDRH-TX-002-D-SET$ 75 / 8 x 1 mLEach mix contains: Regular, Unleaded Gasoline & #2 Diesel FuelCat. No. Conc. SolventDRH-TX-002-D-0.01X 5 µg/mL CH 2 Cl 2DRH-TX-002-D-0.04X 20 µg/mL CH 2 Cl 2DRH-TX-002-D-0.1X 50 µg/mL CH 2 Cl 2DRH-TX-002-D-0.2X 100 µg/mL CH 2 Cl 2DRH-TX-002-D-0.4X 200 µg/mL CH 2 Cl 2DRH-TX-002-D-1X 500 µg/mL CH 2 Cl 2DRH-TX-002-D-2X 1000 µg/mL CH 2 Cl 2DRH-TX-002-D-10X 5000 µg/mL CH 2 Cl 2Gasoline/Diesel Continuing Calibration SolutionDRH-TX-002-D-0.4X-10ML$ 50 / 1 x 10 mL200 µg/mL each in CH 2 Cl 2 2 comps.Gasoline - Regular, unleaded#2 Diesel FuelTechnical NotesStock Hydrocarbon Calibration StandardDRH-TX-001-10X$ 25 / 1 x 1 mLDRH-TX-001-10X-PAKSAVE 20% $ 100 / 5 x 1 mL2000 µg/mL each in n-Pentane 12 comps.n-Hexanen-Octanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Eicosanen-Docosanen-Tetracosanen-Hexacosanen-OctacosaneGasoline/Diesel Calibration/Matrix Spike SolutionDRH-TX-002-10X$ 25 / 1 x 1 mLDRH-TX-002-10X-PAKSAVE 20% $ 100 / 5 x 1 mL5000 µg/mL each in MeOH 2 comps.Gasoline - Regular, unleaded#2 Diesel FuelStock Gasoline/Diesel Calibration SolutionDRH-TX-002-D-40X$ 25 / 1 x 1 mLDRH-TX-002-D-40X-PAKSAVE 20% $ 100 / 5 x 1 mL20,000 µg/mL each in CH 2 Cl 2 2 comps.Gasoline - Regular, unleaded#2 Diesel FuelTexas Method 1005 Rev. 03 and 1006Over 22,000 notifications of leaking petroleum storage tanks have been received by the Texas Natural Resource Conservation Commission. At least 8000 of these leaks haveaffected groundwater resulting in the testing and monitoring of the site. The capability to test for TPH concentration and identify the petrochemical product offers analyticallaboratories additional sources of revenue.New State specific methods have been proposed and promulgated to determine the Total concentration of Petroleum Hydrocarbons (TPH). AccuStandard continues to supportthe analytical community by developing these new formulations to meet both TNRCC method 1005 Rev. 3.0 and 1006. Additionally, QA/QC and Proficiency Testing samples arenow available to monitor sample handling/testing procedures or to receive certification to perform TPH analysis.These new standards are in ready to use calibration curves, cost effective bulk quantities, and convenient concentrations to simplify the instrument calibration procedures.Gasoline & Diesel Calibration CurveDRH-TX-003-SET$ 125 / 8 x 1 mLEach mix contains:Regular, Unleaded Gasoline & #2 Diesel FuelCat. No. Conc. SolventDRH-TX-003-0.04X 20 µg/mL PentaneDRH-TX-003-0.2X 100 µg/mL PentaneDRH-TX-003-0.5X 250 µg/mL PentaneDRH-TX-003-1X 500 µg/mL PentaneDRH-TX-003-1.5X 750 µg/mL PentaneDRH-TX-003-2X 1000 µg/mL PentaneDRH-TX-003-10X 5000 µg/mL PentaneDRH-TX-003-20X 10000 µg/mL PentaneSurrogate StandardDRH-TX-003-SS1$ 35 / 1 x 5 mLDRH-TX-003-SS1-PAKSAVE 20% $ 175 / 5 x 5 mL10 mg/mL each in Pentane 2 comps.1-Chlorooctadecane1-ChlorooctaneAromatic Fractionation Check StandardDRH-TX-003-FCS$ 55 / 1 x 10 mLDRH-TX-003-FCS-PAKSAVE 20% $ 220 / 5 x 10 mL20 µg/mL each in Pentane 24 comps.AcenaphtheneAcenaphthyleneAnthraceneBenzeneBenz[a]anthraceneBenzo[b]fluorantheneBenzo[k]fluorantheneBenzo[a]pyreneCarbon Number Distribution MakerDRH-TX-003-CNM$ 30 / 1 x 1 mLDRH-TX-003-CNM-PAKSAVE 20% $ 120 / 5 x 1 mL2000 µg/mL each in Pentane 9 comps.n-Decanen-Dodecanen-HeneicosaneBenzo[e]pyreneBenzo[g,h,i]peryleneChryseneDibenz[a,h]anthraceneEthylbenzeneFluorantheneFluoreneIndeno[1,2,3-cd]pyrenen-Heptanen-Hexadecanen-HexaneNaphthalenePhenanthrenePyreneToluene1,2,3-Trimethylbenzenem-Xylenep-Xyleneo-Xylenen-Octacosanen-Octanen-PentatriacontaneLUFT/LUSTFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com89


LUFT/LUSTWashingtonLUFT/LUST StandardsState MethodsWashington MethodDetermination of Volatile Petroleum Hydrocarbons (VPH)VPH SolutionWA-VPH$ 30 / 1 x 1 mLWA-VPH-PAK SAVE 20% $ 120 / 5 x 1 mL200 µg/mL each in MeOH 15 comps.BenzeneEthylbenzeneTolueneo-Xylenem-Xylenep-XyleneMtBEn-Pentanen-Hexanen-Octanen-Decanen-Dodecane1-MethylnaphthaleneNaphthalene1,2,3-TrimethylbenzeneVPH Primary Dilution Standardwith SurrogateWA-VPH-10X-SS$ 35 / 1 x 1 mLWA-VPH-10X-SS-PAKSAVE 20% $ 140 / 5 x 1 mL2,000 µg/mL each in MeOH 16 comps.BenzeneEthylbenzeneTolueneo-Xylenem-Xylenep-XyleneMtBEn-Pentanen-Hexanen-Octanen-Decanen-Dodecane1-MethylnaphthaleneNaphthalene1,2,3-Trimethylbenzene2,5-Dibromotoluene (surrogate)Stock Concentrate VPH SolutionsWA-VPH-10X$ 30 / 1 x 1 mLWA-VPH-10X-PAK SAVE 20% $ 120 / 5 x 1 mL2,000 µg/mL each in MeOH 15 comps.WA-VPH-100X$ 35 / 1 x 1 mLWA-VPH-100X-PAK SAVE 20% $ 140 / 5 x 1 mL20.0 mg/mL each in MeOH 15 comps.BenzeneEthylbenzeneTolueneo-Xylenem-Xylenep-XyleneMtBEn-Pentanen-Hexanen-Octanen-Decanen-Dodecane1-MethylnaphthaleneNaphthalene1,2,3-TrimethylbenzeneVPH Matrix SpikeWA-VPH-MS$ 25 / 1 x 1 mLWA-VPH-MS-PAK SAVE 20% $ 100 / 5 x 1 mLVaried conc. in MeOH11 comps.BenzeneEthylbenzeneMTBENaphthalenen-Nonanen-PentaneToluene1,2,3-Trimethylbenzenem-Xylenep-Xyleneo-Xylene(60 µg/mL)(60 µg/mL)(180 µg/mL)(360 µg/mL)(200 µg/mL)(600 µg/mL)(60 µg/mL)(60 µg/mL)(60 µg/mL)(60 µg/mL)(60 µg/mL)VPH Surrogate StandardGRH-004-SS$ 10 / 1 x 1 mLGRH-004-SS-PAK SAVE 20% $ 40 / 5 x 1 mL50 µg/mL in MeOHGRH-004-SS-10X$ 20 / 1 x 1 mLGRH-004-SS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL500 µg/mL in MeOHGRH-004-SS-100X$ 20 / 1 x 1 mLGRH-004-SS-100X-PAKSAVE 20% $ 80 / 5 x 1 mL5,000 µg/mL in MeOH2,5-DibromotolueneVPH Retention Time MarkerWA-VPH-RT$ 20 / 1 x 1 mLWA-VPH-RT-PAK SAVE 20% $ 80 / 5 x 1 mL2,000 µg/mL each in MeOH 6 comps.n-Pentanen-Hexanen-Octanen-Decanen-Dodecanen-Tridecane1,2,3-Trimethylbenzene StandardV-028S-D-10X$ 20 / 1 x 1 mLV-028S-D-10X-PAK SAVE 20% $ 80 / 5 x 1 mL1000 µg/mL each in CH 2 Cl 21,2,3-TrimethylbenzeneCertified BTEX in Unleaded Gasoline(Single Source)GA-001-20X-BTEX10.0 mg/mL in MeOHGasoline - Regular, unleadedCertified BTEX in GasolineComposite Mix (Multi Source)AK-101.0-GCS-BTEX$ 55 / 1 x 1 mL5 mg/mL each in MeOH 3 comps.Gasoline - Premium (1.66 mg/mLGasoline - Regular, leaded (1.67 mg/mL)Gasoline - Regular, unleaded (1.67 mg/mL)$ 55 / 1 x 1 mLTechnical NotesSimultaneous BTEX / Gasoline QA/QCAccuStandard's QA/QC department has certified the benzene, toluene, ethylbenzene and xylene concentrations in our unleaded gasoline Standard.(GA-001-20X-BTEX and in AK-101.0-GCS-BTEX). Use of either standard allowsthe analytical chemist in a single injection to verify that the QA/QC requirementsare being met for the BTEX analytes as well as for the gasoline.Since formulating the Standards for the TPH methods and because of numerouslaboratory requests, we have added a new multi source certified BTEX ingasoline composite mix (AK-101.0-GCS-BTEX). The BTEX values for this multisource calibration standard have been determined through in-house analysisagainst a BTEX multi level calibration curve.AccuStandard's Product Development Team continues to look for innovativeapproaches to save the analytical laboratory time and money.LUFT/LUSTWashington EPH Standards on Next Page90 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsState MethodsLUFT/LUSTWashingtonWisconsinWashington MethodDetermination of Extractable Petroleum Hydrocarbons (EPH)EPH Aromatic/PAH StandardWA-EPH-10X$ 75 / 1 x 1 mLWA-EPH-10X-PAK SAVE 20% $ 300 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 18 comps.AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChryseneInternal StandardEPH Matrix SpikeAcenaphtheneAnthraceneBenzo[g,h,i]peryleneBenzo[a]pyrenen-Decanen-Dodecanen-Hexadecanen-HeneicosaneNaphthalenePyreneDibenz[a,h]anthraceneFluorantheneFluoreneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrene1,2,3-TrimethylbenzeneGRH-IS$ 15 / 1 x 1 mL1,000 µg/mL in CH 2 Cl 2GRH-IS-PAK SAVE 20% $ 60 / 5 x 1 mL1,000 µg/mL in CH 2 Cl 2GRH-IS-10X$ 30 / 1 x 1 mL10.0 mg/mL in CH 2 Cl 25-alpha AndrostaneEPH Surrogate SpikeDRH-MA-SS$ 10 / 1 x 1 mL20 µg/mL each in Acetone 2 comps.DRH-MA-SS-10X$ 20 / 1 x 1 mL200 µg/mL each in Acetone 2 comps.DRH-MA-SS-100X$ 20 / 1 x 1 mLDRH-MA-SS-100X-PAK SAVE 20% $ 80 / 5 x 1 mL2,000 µg/mL each in Acetone 2 comps.1-Chlorooctadecane o-TerphenylWA-EPH-MS2-20ML$ 30 / 1 x 20 mLWA-EPH-MS2-20ML-PAK25 µg/mL each in Acetone 10 comps.EPH Aliphatic Check MixWA-EPH-ALI$ 20 / 1 x 1 mLWA-EPH-ALI-PAK SAVE 20% $ 80 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 5 comps.n-Octanen-Decanen-DodecaneAcenaphtheneBenzo[g,h,i]peryleneNaphthalenen-Octanen-Decanen-DodecaneAcenaphtheneBenzo[g,h,i]peryleneNaphthalenen-Hexadecanen-HeneicosaneEPH Aromatic Check MixWA-EPH-ARO$ 30 / 1 x 1 mLWA-EPH-ARO-PAKSAVE 20% $ 120 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 5 comps.Revised EPH AliphaticCheck MixRevised EPH AromaticCheck MixPyrene1,2,3-TrimethylbenzeneWA-EPH-ALI-R1$ 20 / 1 x 1 mLWA-EPH-ALI-R1-PAK SAVE 20% $ 80 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 6 comps.n-Hexadecanen-Heneicosanen-TetratriacontaneWA-EPH-ARO-R1$ 30 / 1 x 1 mLWA-EPH-ARO-R1-PAK $ 120 / 5 x 1 mL1.0 mg/mL each in CH 2 Cl 2 6 comps.Aliphatic SurrogatePyrene1,2,3-TrimethylbenzeneTolueneDRH-007-SS$ 15 / 1 x 1 mLDRH-007-SS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in Hexane1-ChlorooctadecaneAromatic SurrogateDRH-006-SS$ 15 / 1 x 1 mLDRH-006-SS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH 2 Cl 2o-TerphenylEPH Fractionation Check SolutionWA-EPH-FCS$ 45 / 1 x 1 mLWA-EPH-FCS-PAK SAVE 20% $ 180 / 5 x 1 mL25 µg/mL each in Hexane 24 comps.AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChryseneDibenz[a,h]anthraceneFluorantheneFluoreneAcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChryseneDibenz[a,h]anthraceneFluorantheneFluoreneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrenen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Eicosanen-HeneicosaneRevised EPH Fractionation CheckSolutionWA-EPH-FCS-R1$ 45 / 1 x 1 mLWA-EPH-FCS-R1-PAKSAVE 20% $ 180 / 5 x 1 mL25 µg/mL each in Hexane 23 compsIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrenen-Octanen-Decanen-Dodecanen-Hexadecanen-Heneicosanen-Tetratriacontane1,2,3-Trimethylbenzene StandardV-028S-D-10X$ 20 / 1 x 1 mLV-028S-D-10X-PAK SAVE 20% $ 80 / 5 x 1 mL1000 µg/mL each in CH 2 Cl 21,2,3-TrimethylbenzeneWisconsin MethodWisconsin DNR - Gasoline Range HydrocarbonsGRH-003S$ 35 / 1 x 1 mLGRH-003S-PAKSAVE 20% $ 140 / 5 x 1 mL2.0 mg/mL each in MeOH 10 comps.LUFT/LUSTBenzeneEthylbenzeneMtBENaphthaleneToluene1,2,4-Trimethylbenzene1,3,5-Trimethylbenzeneo-Xylenem-Xylenep-XyleneFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com91


LUFT/LUSTTPHLUFT/LUST StandardsComplete Set of Total Petroleum Hydrocarbon (TPH) Pattern Recognition StandardsAccuStandard has assembled the following sets to identify specific petroleum product types found during LUFT/LUST investigations. The setscan be purchased using one convenient Cat. No. or as individuals.TPH-SET$ 535 / 33 x 1 mL (includes TPH-001-SET, TPH-002-SET, TPH-003-SET, TPH-004-SET)LUFT/LUSTMotor Fuels & Lubricating Oils SetTPH-001-SET $ 180 / 11 x 1 mL (Set includes Cat. No.'s listed in Bold)Conc.1 mLDescription (mg/mL) Solv. Cat. No. PriceRegular unleaded 0.5 MeOH GA-001 $ 1020 MeOH GA-001-40X 2020 CH 2 Cl 2 GA-001-D-40X 20Regular leaded 0.5 MeOH GA-002 1020 MeOH GA-002-40X 2020 CH 2 Cl 2 GA-002-D-40X 20Premium 0.5 MeOH GA-003 1020 MeOH GA-003-40X 2020 CH 2 Cl 2 GA-003-D-40X 20RFA Gasoline 0.5 MeOH GA-005 10(oxygenate free) 20 MeOH GA-005-40X 2020 CH 2 Cl 2 GA-005-D-40X 20#2 Diesel 0.5 MeOH FU-009 10(conventional) 20 MeOH FU-009-40X 2020 CH 2 Cl 2 FU-009-D-40X 20#1 Diesel 0.5 MeOH FU-013 10(low sulfur) 20 MeOH FU-013-40X 2020 CH 2 Cl 2 FU-013-D-40X 20#2 Diesel 0.5 MeOH FU-017 10(extra low sulfur) 20 MeOH FU-017-40X 2020 CH 2 Cl 2 FU-017-D-40X 20Arctic Diesel 0.5 MeOH FU-023 1020 MeOH FU-023-40X 2020 CH 2 Cl 2 FU-023-D-40X 20SAE 30 W motor oil 0.5 Hexane FU-018-H 1020 Hexane FU-018-H-40X 2020 CH 2 Cl 2 FU-018-D-40X 20SAE 40 W motor oil 0.5 Hexane FU-019-H 1020 Hexane FU-019-H-40X 2020 CH 2 Cl 2 FU-019-D-40X 20SAE 50 W motor oil 0.5 Hexane FU-021-H 1020 Hexane FU-021-H-40X 2020 CH 2 Cl 2 FU-021-D-40X 20Heating Fuel Oils SetTPH-002-SET $ 115 / 7 x 1 mL (Set includes Cat. No.'s listed in Bold)Conc.1 mLDescription (mg/mL) Solv. Cat. No. Price#1 Fuel Oil 0.5 MeOH FU-001 $ 1020 MeOH FU-001-40X 2020 CH 2 Cl 2 FU-001-D-40X 20#2 Fuel Oil 0.5 MeOH FU-002 1020 MeOH FU-002-40X 2020 CH 2 Cl 2 FU-002-D-40X 20#3 Fuel Oil 0.5 Hexane FU-003 1020 Hexane FU-003-40X 2020 CH 2 Cl 2 FU-003-D-40X 20#4 Fuel Oil 0.5 Hexane FU-004 1020 Hexane FU-004-40X 2020 CH 2 Cl 2 FU-004-D-40X 20#5 Fuel Oil 0.5 Hexane FU-007 1020 Hexane FU-007-40X 2020 CH 2 Cl 2 FU-007-D-40X 20#6 Fuel Oil 0.5 Hexane FU-008 1020 Hexane FU-008-40X 2020 CH 2 Cl 2 FU-008-D-40X 20Kerosene 0.5 MeOH FU-005 1020 MeOH FU-005-40X 2020 CH 2 Cl 2 FU-005-D-40X 20Aviation Fuels & Oils SetTPH-003-SET $ 160 / 10 x 1 mL (Set includes Cat. No.'s listed in Bold)Conc.1 mLDescription (mg/mL) Solv. Cat. No. PriceAviation (gas) 0.5 MeOH GA-004 $ 10Grade 100 LL 20 MeOH GA-004-40X 2020 CH 2 Cl 2 GA-004-D-40X 20JP-4 Fuel 0.5 MeOH FU-010 1020 MeOH FU-010-40X 2020 CH 2 Cl 2 FU-010-D-40X 20JP-5 Fuel 0.5 MeOH FU-012 1020 MeOH FU-012-40X 2020 CH 2 Cl 2 FU-012-D-40X 20JP-7 Fuel 0.5 MeOH FU-014 1020 MeOH FU-014-40X 2020 CH 2 Cl 2 FU-014-D-40X 20JP-8 Fuel 0.5 MeOH FU-015 1020 MeOH FU-015-40X 2020 CH 2 Cl 2 FU-015-D-40X 20JP-10 Fuel 0.5 MeOH FU-022 10(Cruise Missile) 20 MeOH FU-022-40X 2020 CH 2 Cl 2 FU-022-D-40X 20JP-TS 0.5 MeOH FU-016 1020 MeOH FU-016-40X 2020 CH 2 Cl 2 FU-016-D-40X 20Jet Fuel (type 1) 0.5 MeOH FU-011 1020 MeOH FU-011-40X 2020 CH 2 Cl 2 FU-011-D-40X 20Turbine (Jet A) Fuel 0.5 MeOH FU-006 1020 MeOH FU-006-40X 2020 CH 2 Cl 2 FU-006-D-40X 20Hydraulic oil 0.5 Hexane FU-020-H 1020 Hexane FU-020-H-40X 2020 CH 2 Cl 2 FU-020-D-40X 20Household & Industrial Solvent SetTPH-004-SET $ 80 / 5 x 1 mL (Set includes Cat. No.'s listed in Bold)Conc.1 mLDescription (mg/mL) Solv. Cat. No. PriceLacquer thinner 1 gram Neat HS-001N $ 100.5 MeOH HS-001S 1020.0 MeOH HS-001S-40X 2020.0 CH 2 Cl 2 HS-001S-D-40X 20Mineral spirits 1 gram Neat HS-002N 100.5 MeOH HS-002S 1020.0 MeOH HS-002S-40X 2020.0 CH 2 Cl 2 HS-002S-D-40X 20Naphtha 1 gram Neat HS-003N 100.5 MeOH HS-003S 1020.0 MeOH HS-003S-40X 2020.0 CH 2 Cl 2 HS-003S-D-40X 20Turpentine 1 gram Neat HS-004N 100.5 MeOH HS-004S 1020.0 MeOH HS-004S-40X 2020.0 CH 2 Cl 2 HS-004S-D-40X 20Stoddard 1 gram Neat HS-005N 100.5 MeOH HS-005S 1020.0 MeOH HS-005S-40X 2020.0 CH 2 Cl 2 HS-005S-D-40X 20Motor Oil & Weathered Fuels Standards on Next Page92 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsLUFT/LUST TPHWeatheredFuelsMotor Oil StandardsConc.1 mLDescription (mg/mL) Solv. Cat. No. PriceSAE 5W 30 0.5 Hexane FU-025-H $ 10Motor Oil 20.0 Hexane FU-025-H-40X 2020.0 CH 2 Cl 2 FU-025-D-40X 20SAE 10W 30 0.5 Hexane FU-026-H 10Motor Oil 20.0 Hexane FU-026-H-40X 2020.0 CH 2 Cl 2 FU-026-D-40X 20Conc.1 mLDescription (mg/mL) Solv. Cat. No. PriceSAE 10W 40 0.5 Hexane FU-027-H $ 10Motor Oil 20.0 Hexane FU-027-H-40X 2020.0 CH 2 Cl 2 FU-027-D-40X 20SAE 20W 50 0.5 Hexane FU-028-H 10Motor Oil 20.0 Hexane FU-028-H-40X 2020.0 CH 2 Cl 2 FU-028-D-40X 20Weathered LUFT/LUST FuelsPetroleum Products contain many different chemicals, plus synthetic product additives. Typically, these petroleum products are subdivided intotwo groups based on their volatility: [a] gasoline related products (more volatile) and [b] fuel related products (less volatile such as kerosene,aviation fuels, diesel fuels and heating oils).Most analytical methods for petroleum products focus on several items: the level of BTEX, the total petroleum hydrocarbon number (TPH), andthe fingerprint of the petroleum product. Depending on the volatility of the petroleum product spilled, the nature of the contaminated soil, andthe age of the spill, analysis becomes even more difficult. Weathering, evaporation, and the migration of the lighter volatiles at the contaminationsite can affect the fingerprint identification portion of the fuel products analysis.AccuStandard designed the weathered fuel line to artificially mimic the weathering, evaporation, and migration process. Use of these standardscan help in the identification of the fuel type if it has been present in the ground for some time, in a sandy type soil with possible evaporationloss, or has migrated from the plume point of origin.Weathered FuelsWeathered Gasoline SetWGU-SET$ 85 / 4 x 1 mLGasoline - Regular, unleaded 5.0 mg/mL in MeOH GA-001-10X $ 20 / 1 x 1 mLGasoline - Regular, unleaded (25% Weathered) 5.0 mg/mL in MeOH GA-W25-10X $ 25 / 1 x 1 mLGasoline - Regular, unleaded (50% Weathered) 5.0 mg/mL in MeOH GA-W50-10X $ 25 / 1 x 1 mLGasoline - Regular, unleaded (75% Weathered) 5.0 mg/mL in MeOH GA-W75-10X $ 25 / 1 x 1 mLWeathered Kerosene SetWFK-SET$ 85 / 4 x 1 mLKerosene 5.0 mg/mL in CH 2 Cl 2 FU-005-D-10X $ 20 / 1 x 1 mLKerosene (25% Weathered) 5.0 mg/mL in CH 2 Cl 2 FK-W25-10X $ 25 / 1 x 1 mLKerosene (50% Weathered) 5.0 mg/mL in CH 2 Cl 2 FK-W50-10X $ 25 / 1 x 1 mLKerosene (75% Weathered) 5.0 mg/mL in CH 2 Cl 2 FK-W75-10X $ 25 / 1 x 1 mLMotor Oil CompositeStandardMO-COMP-D-40X $ 30 / 1 x 1 mL5000 µg/mL each in CH 2 Cl 2 4 comps.5w30 Motor oil10w30 Motor oil10w40 Motor oil20w50 Motor oilWeathered #2 Diesel (extra Low Sulfur Content) SetWFD2-SET$ 85 / 4 x 1 mL#2 Diesel fuel (extra Low Sulfur) 5.0 mg/mL in CH 2 Cl 2 FU-017-D-10X $ 20 / 1 x 1 mL#2 Diesel fuel (extra Low Sulfur) (25% Weathered) 5.0 mg/mL in CH 2 Cl 2 FD2-W25-10X $ 25 / 1 x 1 mL#2 Diesel fuel (extra Low Sulfur) (50% Weathered) 5.0 mg/mL in CH 2 Cl 2 FD2-W50-10X $ 25 / 1 x 1 mL#2 Diesel fuel (extra Low Sulfur) (75% Weathered) 5.0 mg/mL in CH 2 Cl 2 FD2-W75-10X $ 25 / 1 x 1 mLWeathered #2 Diesel (Conventional) SetWFD2-R1-SET$ 85 / 4 x 1 mL#2 Diesel fuel (Conventional) 5.0 mg/mL in CH 2 Cl 2 FU-009-D-10X $ 20 / 1 x 1 mL#2 Diesel fuel (Conventional) (25% Weathered) 5.0 mg/mL in CH 2 Cl 2 FD2-W25-R1-10X $ 25 / 1 x 1 mL#2 Diesel fuel (Conventional) (50% Weathered) 5.0 mg/mL in CH 2 Cl 2 FD2-W50-R1-10X $ 25 / 1 x 1 mL#2 Diesel fuel (Conventional) (75% Weathered) 5.0 mg/mL in CH 2 Cl 2 FD2-W75-R1-10X $ 25 / 1 x 1 mLTotal Petroleum Hydrocarbon Pattern Recognition StandardsThis book contains chromatography for the various petroleum products typically found duringLUFT/LUST site investigations. The chromatography shows each fuel pattern in a 25 minute analyticalrun for early eluting petroleum products like gasoline to late eluting products like motor oil. Inaddition, an n-alkane standard (DRH-008S) analyzed under identical conditions has been overlaid oneach petroleum product chromatogram. Use of the book will assist the chemist’s identification of thefuel for pattern recognition.The n-alkane standard (DRH-008S) overlay provides n-alkane reference points between the standardand the unknown sample. These beginning and ending n-alkane reference points can be used toestablish gross hydrocarbon concentrations. By comparing the specific n-alkane range of the closestidentified petroleum standard to that of the unknown sample, a reproducible gross hydrocarbon numbercan be achieved.To Order:TPH BookBOOK-TPH $ 35LUFT/LUSTFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com93


LUFT/LUSTGRHLUFT/LUST StandardsGasoline RangeGasoline Range Hydrocarbon AnalysisEPA Method - Gasoline Range HydrocarbonsGasoline StandardGRH-002SAt stated conc. in MeOH2-Methylpentane (1.5 mg/mL)2,2,4-Trimethylpentane (1.5 mg/mL)Heptane(0.5 mg/mL)Benzene(0.5 mg/mL)Toluene(1.5 mg/mL)Internal StandardGARH-IS1.0 mg/mL in CH 2 Cl 2Chloro-4-fluorobenzeneSurrogate StandardGARH-SS2.5 mg/mL in Acetone4-BromofluorobenzeneGasoline AdditivesDibromomethane1,2-Dibromoethane$ 25 / 1 x 1 mL10 comps.Ethylbenzene (0.5 mg/mL)m-Xylene(1.0 mg/mL)p-Xylene(1.0 mg/mL)o-Xylene(1.0 mg/mL)1,2,4-Trimethylbenzene (1.0 mg/mL)1,2-DichloroethaneMethyl t-butyl ether$15 / 1 x 1 mL$ 20 / 1 x 1 mLGAD-001$ 20 / 1 x 1 mLGAD-001-PAKSAVE 20% $ 80 / 5 x 1 mL0.2 mg/mL each in MeOH 4 comps.Technical NoteSimultaneous BTEX/Gasoline QA/QCAccuStandard's QA/QC department has certified the benzene,toluene, ethyl benzene and xylene concentrations in ourunleaded gasoline standard. Use of GA-001-20X-BTEX allowsthe analytical chemist in a single injection to verify that QA/QCrequirements are being met for the BTEX analytes as well asthe gasoline.AccuStandard's Product Development Team continues to lookfor innovative approaches to save the analytical laboratory timeand money.California - Gasoline Range HydrocarbonsS-603A-10X$ 25 / 1 x 1 mLS-603A-10X-PAKSAVE 25% $ 90 / 5 x 1 mL2.0 mg/mL each in MeOH 7 comps.BenzeneEthylbenzeneMethyl t-butyl etherTolueneLos Angeles County Well Investigation andMonitoring ProgramPurgeable Aromatics - Gasoline IDM-602-GAS-10X$ 30 / 1 x 1 mL2.0 mg/mL each in MeOH 11 comps.BenzeneChlorobenzene1,2-Dichlorobenzene1,3-Dichlorobenzene1,4-DichlorobenzeneEthylbenzeneOxygenate Gasoline Additive StandardOGAD-001OGAD-001-PAKAt stated conc. in MeOHMtBEETBEIsopropyl etherEthanolM-8015B/5031-1110 mg/mL in WaterMethanolM-8015B/5031-1710 mg/mL in Water(2000 µg/mL)(2000 µg/mL)(2000 µg/mL)Tolueneo-Xylenep-Xylenem-XyleneMtBETAMEt-Butanolo-Xylenem-Xylenep-Xylene$ 30 / 1 x 1 mL$ 120 / 1 x 1 mL5 comps.(2000 µg/mL)(10000 µg/mL)$ 25 / 1 x 1 mL$ 20 / 1 x 1 mLPennsylvania DER - Gasoline Range HydrocarbonsGRH-001S$ 25 / 1 x 1 mLGRH-001S-PAKSAVE 20% $ 100 / 1 x 1 mL1.0 mg/mL each in MeOH 10 comps.Certified BTEX in Unleaded GasolineGA-001-20X-BTEX10.0 mg/mL in MeOHRegular unleaded gasoline$ 55 / 1 x 1 mLBenzeneEthylbenzeneHeptane2-Methyl pentaneToluene1,2,4-Trimethylbenzene2,2,4-Trimethylpentaneo-Xylenem-Xylenep-XyleneLUFT/LUSTHexadecane Extraction VolatilesCLP-BTEX$ 30 / 1 x 1 mLCLP-BTEX-PAKSAVE 20% $ 120 / 5 x 1 mL0.2 mg/mL each in MeOH 6 comps.CLP-BTEX-10X$ 30 / 1 x 1 mLCLP-BTEX-10X-PAKSAVE 20% $ 120 / 5 x 1 mL2.0 mg/mL each in MeOH 6 comps.BenzeneEthyl benzeneTolueneo-Xylenem-Xylenep-XyleneWisconsin DNR - Gasoline Range HydrocarbonsGRH-003S$ 35 / 1 x 1 mLGRH-003S-PAKSAVE 20% $ 140 / 5 x 1 mL2.0 mg/mL each in MeOH 10 comps.BenzeneEthylbenzeneMtBENaphthaleneToluene1,2,4-Trimethylbenzene1,3,5-Trimethylbenzeneo-Xylenem-Xylenep-Xylene94 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsDiesel RangeLUFT/LUSTDRHDiesel Range Hydrocarbon AnalysisEPA Method - Diesel Range HydrocarbonsDRH-001S$ 20 / 1 x 1 mL0.2 mg/mL each in CH 2 Cl 2 : Hexane (1:1) 10 comps.DRH-001S-10X$ 30 / 1 x 1 mL2.0 mg/mL each in CH 2 Cl 2 : Hexane (1:1) 10 comps.n-Decane C 10n-Dodecane C 12n-Tetradecane C 14Surrogate StandardGRH-SSGRH-SS-PAK2.0 mg/mL in Acetoneo-Terphenyl (OTP)Internal StandardGRH-ISGRH-IS-PAK1.0 mg/mL in CH 2 Cl 25-alpha Androstanen-Hexadecane C 16n-Octadecane C 18n-Eicosane C 20n-Docosane C 22n-Tetracosane C 24Tetracosane C 24Hexacosane C 26Octacosane C 28Triacontane C 30n-Hexacosane C 26n-Octacosane C 28$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mL$ 15 / 1 x 1 mLSAVE 20% $ 60 / 5 x 1 mLCalibration/Window Defining Hydrocarbon StandardDRH-004S-5X$ 50 / 1 x 1 mL1.0 mg/mL each in CH 2 Cl 2 : CS 2 (1:1) 17 comps.Octane C 8Decane C 10Dodecane C 12Tetradecane C 14Surrogate StandardDRH-SSDRH-SS-PAK5.0 mg/mL in THFHexadecane C 16Octadecane C 18Eicosane C 20Docosane C 22Dotriacontane C 32Tetratriacontane C 34Hexatriacontane C 36Octatriacontane C 38Tetracontane C 40$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mLComplete Hydrocarbon AnalysisMulti-State Hydrocarbon Window Defining StandardDRH-008S-R2$ 65 / 1 x 1 mLDRH-008S-R2-PAKSAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecaneHeptadecaneOctadecaneHeptadecanePristaneOctadecanePhytaneNonadecaneEicosaneHeneicosaneDocosaneTricosaneTetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosaneTriacontanen-HentriacontaneDotriacontaneTechnical NoteTritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontaneAccuStandard offers a hydrocarbon window defining standardwith the C 8 to C 40 odd and even Alkanes. Use of this onestandard should meet the numerous State to State variations forhydrocarbon validation and reporting. As an added benefitAccuStandard included pristane and phytane in the formulation.Again, use of this one standard can meet numerous LUFT/LUSTprograms requiring that the C 17 / pristane and C 18 / phytane ratiobe used to estimate subsurface degradation of fuel oil spills.If you prefer, AccuStandard has also developed a fuel oildegradation mixture containing just the four required analytes todetermine the C 17 /pristane and C 18 / phytane ratio. Cat. No.DRH-005S-10XFuel Oil Degradation/Retention Time Mixture forquantification of C 17 /Pristane and C 18 /Phytane ratiosDRH-005S-10X$ 20 / 1 x 1 mL2.0 mg/mL each in CH 2 Cl 2 : CS 2 (1:1) 4 comps.Phytane (2,6,10,14-Tetramethylhexadecane)Pristane (2,6,10,14-Tetramethylpentadecane)n-Triacontane-d 62D-2887 Calibration SolutionCalibration SolutionDRH-002SAt stated conc. in CS 2Hexane (600 µg/mL) Dodecane (1,200 µg/mL)Heptane (600 µg/mL) Tetradecane (1,200 µg/mL)Octane (800 µg/mL) Hexadecane (1,000 µg/mL)Nonane (800 µg/mL) Octadecane (500 µg/mL)Decane (1,200 µg/mL) Eicosane (200 µg/mL)Undecane (1,200 µg/mL) Tetracosane (200 µg/mL)$ 45 / 1 x 1 mL17 comps.Octacosane (100 µg/mL)Dotriacontane (100 µg/mL)Hexatriacontane (100 µg/mL)Tetracontane (100 µg/mL)Tetratetracontane (100 µg/mL)Hydrocarbon Window Defining Standard SetDRH-FTRPH-SETDRH-FTRPH-SET-PAK500 µg/mL each in Hexanen-Octanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Eicosanen-Docosanen-Tetracosanen-Hexacosane$ 80 / 2 x 1 mLSAVE 20% $ 320 / 5 (2 x 1 mL)FTRPH Calibration/Window Defining StandardDRH-FTRPH$ 35 / 1 x 1 mLDRH-FTRPH-PAKSAVE 15% $ 150 / 5 x 1 mL500 µg/mL each in Hexane 17 comps.n-Octacosane n-Hexatriacontanen-Triacontane n-Octatriacontanen-Dotriacontane n-Tetracontanen-TetratriacontaneColumn Test MixtureASTM-D2887$ 10 / 1 x 1 mL1% v/v in n-Octane 2 comps.n-Hexadecanen-OctadecaneWisconsin Diesel Range HydrocarbonsDRH-003S$ 20 / 1 x 1 mL0.2 mg/mL each in Hexane 11 comps.Hydrocarbon Window Defining StandardDRH-FTRPH2$ 45 / 1 x 1 mLDRH-FTRPH2-PAKSAVE 20% $ 180 / 5 x 1 mL500 µg/mL each in Hexane 18 comps.n-Nonanen-Undecanen-Tridecanen-Pentadecanen-HeptadecanePristanePhytanen-Nonadecanen-Heneicosanen-Tricosanen-Pentacosanen-Heptacosanen-Nonacosanen-Hentriacontanen-Tritriacontanen-Pentatriacontanen-Heptatriacontanen-NonatriacontaneLUFT/LUSTn-Decane C 10 n-Tetradecane C 14n-Tridecane C 13 n-Heptadecane C 17n-Undecane C 11 n-Pentadecane C 15n-Dodecane C 12 n-Hexadecane C 16n-Octadecane C 18n-Nonadecane C 19n-Eicosane C 20Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com95


LUFT/LUSTQCPTLUFT/LUST Proficiency Test Samples* Designed for NELAC/CAAt stated conc. in MeOH5 comps.MtBE(2000 µg/mL) TAME(2000 µg/mL)Suffix KeyPetro PT Samples"AS" = Formal PT Study"AT" = Pre-Test, Quick TATNew PT Samples Gasoline & Diesel"AV" = Values IncludedThe new Gasoline PT sample allows laboratories to test for gasoline TPH. This sample can also be used to test for the BTEXconcentrations so the lab can use this product for method 602, 8020, 8021 and 8015 modified. The sample can also be usedto reduce analytical bias by using the recommended calibration standard listed with the PT sample when conducting PT studies.AccuStandard is the one ISO 9001 standard manufacturer capable of supplying not only the PT sample(s), but also a widevariety of calibration standards to meet your specific TPH Method requirement.Oxygenate PT SampleWP-PT Oil, Grease & TPHWith MtBE contamination problems in drinking water, numerous states IPE-OILG-001-AS*$ 32 / 5 mLare now requiring certification for Oxygenate monitoring. JoinIPE-OILG-001-AT$ 32 / 5 mLAccuStandard’s next study for Oxygenate analysis. Our timely PT IPE-OILG-001-AV *$ 32 / 5 mLSample conc. after prepschedule easily allows your lab to be proactive in new regulatoryContains 2 analytes listed belowrequirements. The analytes in the standard and the PT sample havebeen drawn from the California list of known prevalent oxygenates in Analyte ListSample rangegasoline. These new Oxygenate PT samples and standards allow your Total Oil & Grease † 5-100 mg/LLab to:TPH5-100 mg/L• Expand testing capabilities• Generate new testing revenueTechnical Note• Eliminate standard preparationThis PT sample can be used by gravimetric oil and grease• Easily combine with other AccuStandard Volatile standards.methods. In addition, it can also be used for TPH analysis bygravimetric methods including the EPA method 1664. TheWS-PT Oxygenatessample contains real world material commonly found atOPE-OXY-001-AS *$ 47 / 2 mLpetroleum containment sites.OPE-OXY-001-AT$ 47 / 2 mLOPE-OXY-001-AV *$ 47 / 2 mLSample conc. after prep 5.0-50 µg/LSuggested Calibration StandardContains 4 analytes listed belowOil and GreaseETBEMTBEDiisopropyletherTAMEWC-OILG-10X-1$ 45 / 100 mL1000 µg/mL Total Oil and Grease in n-PropanolContains 500 µg/mL vegetable oil and 500 µg/mL of petroleum oil. ShakeSuggested Calibration Standardwell before use.Oxygenate Gasoline Additive StandardOGAD-001$ 30 / 1 x 1 mLOGAD-001-PAKSAVE 20% $ 120 / 5 x 1 mLETBE(2000 µg/mL) t-Butanol (10000 µg/mL)Isopropyl ether (2000 µg/mL)NEW† indicates these are included in the NVLAP Scope of Accreditation†† indicates kits. See individual Cat. No.s for Accreditation status of analytesLab Code 200389-0LUFT/LUST96 Quality System is Certified to comply with the International ISO 9001 Quality Standard


LUFT/LUST StandardsOil, Grease & TPHMethod 1664413 & 4188440Method 1664Oil, Grease & Total Petroleum Hydrocarbon DeterminationPrecision and Recovery (PAR) Spiking SolutionM-1664-5ML$ 15 / 1 x 5 mLM-1664-5ML-PAKSAVE 20% $ 60 / 5 x 5 mL4.0 mg/mL each in Acetone 2 comps.M-1664-20ML$ 25 / 1 x 20 mLM-1664-20ML-PAKSAVE 20% $ 100 / 5 x 20 mL4.0 mg/mL each in Acetone 2 comps.HexadecaneStearic acidTechnical NoteAccuStandard's Precison and Recovery (PAR) Spiking Solution wasdeveloped for the new Method 1664. This performance based method wasdeveloped to replace previous gravimetric procedures which incorporatedFreon-113 as the extraction solvent for the determination of Oil and Greaseand Total Petroleum Hydrocarbons. Each standard is packaged in a flamesealed ampule conveniently sized for quality control of the analytical batch.Method 413.2 & 418.1Oil, Grease & Petroleum HydrocarbonConcentrates MixChlorobenzene (25.0)Isooctane (37.5)Total Petroleum Hydrocarbon Analysis by IRM-418-CON$ 35 / 1 x 1 mL% by volume 3 comps.Hexadecane (37.5)Oil, Grease and PetroleumHydrocarbon Total Recoverable (IR Method)M-418 $ 30 / 1 x 1 mLM-418-PAKSAVE 20% $ 120 / 5 x 1 mLTotal 4.15 mg/mL in Freon 113, (Parts by volume)3 comps.Chlorobenzene (10.0)n-Hexadecane (15.0)Isooctane (15.0)Method 8440Total Petroleum Hydrocarbon AnalysisTotal Recoverable Petroleum Hydrocarbon MixM-8440 $ 20 / 1 x 1 mLM-8440-PAKSAVE 20% $ 80 / 5 x 1 mLAt stated conc. in Tetrachloroethene3 comps.Chlorobenzene (0.10 w/w %)n-Hexadecane (0.15 w/w %)Isooctane (0.15 w/w %)Total Petroleum Hydrocarbon Concentrate MixM-8440-CONM-8440-CON-PAKChlorobenzene (25.0 vol %)n-Hexadecane (37.5 vol %)$ 30 / 1 x 1 mLSAVE 20% $ 120 / 5 x 1 mL3 comps.Isooctane (37.5 vol %)Silica Gel Cleanup Calibration SolutionM-8440-SGC$ 10 / 1 x 1 mLM-8440-SGC-PAKSAVE 20% $ 40 / 5 x 1 mL10.0 mg/mL in TetrachloroetheneCorn OilLeaking Underground Storage TankRetention Time StandardThis product can be used to screen a sample todetermine what type of petroleum spill that may havecaused the contamination.Retention Time StandardDRH-010S$ 20 / 1 x 1 mLDRH-010S-PAKSAVE 20% $ 80 / 5 x 1 mL25 µg/mL each in CH 2 Cl 2 7 comps.n-Hexanen-Decanen-Dodecanen-Tetracosanen-OctacosaneTechnical Noten-Triacontanen-TetracontaneNEWA sample showing peaks in the C6-C10 range generallyindicates a gasoline spill. Samples with the peaks in the C24-C12 range are indicative of a diesel spill while samples withthe higher carbon numbers above C24 are typically oils orlubricants. Once the initial screen is complete, more detailedwork can be done to further identify the contaminant.Total Petroleum HydrocarbonPattern Recognition StandardsThis book contains chromatography for thevarious petroleum products typically foundduring LUFT/LUST site investigations. Thechromatography shows each fuel pattern in a25 minute analytical run for early elutingpetroleum products like gasoline to lateeluting products like motor oil. In addition,an n-alkane standard (DRH-008S) analyzedunder identical conditions has been overlaidon each petroleum product chromatogram.Use of the book will assist the chemist’sidentification of the fuel for patternrecognition.The n-alkane standard (DRH-008S) overlay provides n-alkane referencepoints between the standard and the unknown sample. These beginning andending n-alkane reference points can be used to establish gross hydrocarbonconcentrations. By comparing the specific n-alkane range of the closestidentified petroleum standard to that of the unknown sample a reproduciblegross hydrocarbon number can be achieved. To Order, BOOK-TPH $ 35LUFT/LUSTFax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com97


LUFT/LUST StandardsAutomotive Engine Exhaust, Refinery Waste (Skinner List)Alcohol Oxidation Products in Automotive Engine Exhaust by HPLC of DNPH derivativesThe California Air Resources Board, in conjunction with some of the larger automobile manufacturers, has developed an HPLC method inwhich the 2,4-Dinitrophenylhydrazine derivatives of the by-products are quantitated.Method 1004AcetaldehydeAcetoneAcroleinBenzaldehydeASTM E-1387DecaneDodecaneEicosane2-Ethyltoluene3-EthyltolueneCarbonyl Compounds as DNPH deriv. by HPLCCarbonyl Compounds as DNPH deriv. by HPLCCalifornia Air Resources Board Method 1004M-1004 $ 25 / 1 x 1 mLAt stated conc. in AcCN13 comps.M-1004-10X$ 35 / 1 x 1 mLAt 10 times the stated conc. in AcCN13 comps.Carbonyl Compound DNPH DerivativeAcetaldehyde (3.0 µg/mL) (15.3 µg/mL)Acetone (3.0 µg/mL) (12.3 µg/mL)Acrolein (3.0 µg/mL) (12.7 µg/mL)Benzaldehyde (3.0 µg/mL) (8.1 µg/mL)2-Butanone (MEK) (3.0 µg/mL) (10.5 µg/mL)n-Butyraldehyde (3.0 µg/mL) (10.5 µg/mL)Crotonaldehyde (3.0 µg/mL) (10.7 µg/mL)Formaldehyde (3.0 µg/mL) (21.0 µg/mL)Hexanal (3.0 µg/mL) (8.4 µg/mL)Methacrolein (3.0 µg/mL) (10.7 µg/mL)Propionaldehyde (3.0 µg/mL) (12.3 µg/mL)m-Tolualdehyde (3.0 µg/mL) (7.5 µg/mL)Valeraldehyde (3.0 µg/mL) (9.3 µg/mL)CAR-DNPHAt stated conc. in AcCN as DNPH derivatives(1000 µg/mL)(500 µg/mL)(500 µg/mL)(500 µg/mL)Reference Gas Oil SampleRGS-001Hydrocarbon Mixture(boiling point range 250-850 °F)ButyraldehydeFormaldehydePropionaldehyde(500 µg/mL)(1500 µg/mL)(500µg/mL)Resolution Check Mix for Fire Debris AnalysisResolution Check MixASTM-E1387$ 30 / 1 x 1 mLASTM-E1387-PAKSAVE 20% $ 120 / 5 x 1 mL2.0 mg/mL each in CH 2 Cl 2 13 comps.HexadecaneHexaneOctadecaneOctane$ 20 / 1 x 1 mL$ 20 / 1 x 1 mL7 comps.TetradecaneToluene1,2,4-Trimethylbenzenep-XyleneSkinner List for Refinery WasteSemi-VolatilesBase/Neutral ExtractablesM-005B 0.2 mg/mL each in CH 2 Cl 2 $ 150 / 1 x 1 mLM-005B-PAK 0.2 mg/mL each in CH 2 Cl 2 SAVE 20% $ 600 / 5 x 1 mLM-005B-10X 2.0 mg/mL each in CH 2 Cl 2 $ 200 / 1 x 1 mLM-005B-10X-PAK 2.0 mg/mL each in CH 2 Cl 2 SAVE 20% $ 1,000 / 5 x 1 mL27 comps.AnthraceneBenzo[a]anthraceneBenzo[b]fluorantheneBenzo[k]fluorantheneBenzo[a]pyrenebis(2-Ethylhexyl)phthalateButyl benzyl phthalateChryseneDibenz[a,h]acridineDibenz[a,h]anthraceneo-Dichlorobenzenem-Dichlorobenzenep-DichlorobenzeneDiethyl phthalateo-Cresolm-Cresolp-Cresol2,4-Dimethylphenol2,4-DinitrophenolBenzeneCarbon disulfideChlorobenzeneChloroform1,2-Dichloroethane1,4-DioxaneEthyl benzene7,12-Dimethylbenz[a]anthraceneDimethyl phthalateDi-n-butyl phthalateDi-n-octyl phthalateIndeneFluoranthene6-Methylchrysene1-MethylnaphthaleneNaphthalenePhenanthrenePyrenePyridineQuinolineAcid ExtractablesM-005A 0.2 mg/mL each in CH 2 Cl 2 $ 35 / 1 x 1 mLM-005A-PAK 0.2 mg/mL each in CH 2 Cl 2 SAVE 20% $ 140 / 5 x 1 mLM-005A-10X 2.0 mg/mL each in CH 2 Cl 2 $ 40 / 1 x 1 mLM-005A-10X-PAK 2.0 mg/mL each in CH 2 Cl 2 SAVE 20% $ 160 / 5 x 1 mL8 comps.4-NitrophenolPhenolThiophenolVolatilesM-005V 0.2 mg/mL each in MeOH $ 35 / 1 x 1 mLM-005V-PAK 0.2 mg/mL each in MeOH SAVE 20% $ 140 / 5 x 1 mLM-005V-10X 2.0 mg/mL each in MeOH $ 40 / 1 x 1 mLM-005V-10X-PAK 2.0 mg/mL each in MeOH SAVE 20% $ 160 / 5 x 1 mL14 comps.Ethylene dibromideMethyl ethyl ketoneStyreneTolueneo-Xylenem-Xylenep-XyleneLUFT/LUSTASTM E-1618n-Decanen-Dodecanen-Eicosaneo-Ethyltoluenem-EthyltolueneResolution Check Mix for Fire Debris AnalysisTest Mix for Fire Debris AnalysisASTM-E1618$ 35 / 1 x 1 mLASTM-E1618-PAKSAVE 20% $ 140 / 5 x 1 mL0.05% v/v (0.50 µL/mL) each in CH 2 Cl 2 13 comps.n-Hexadecanen-Hexanen-Octadecanen-Octanen-TetradecaneToluene1,2,4-Trimethylbenzenep-Xylene98 Quality System is Certified to comply with the International ISO 9001 Quality Standard


Catalog Number IndexAA01N-1 73AA01N-5 73AA01N-1 26AA01N-10X-20ML 73AA01N-25X-20ML 73AA01N-5 26AA02N-1 73AA02N-5 73AA02W-10X-20ML 73AA03N-10X-20ML 73AA03N-25X-20ML 73AA03N-1 73AA03N-5 73AA04N-1 73AA04N-5 73AA04N-10X-20ML 73AA04N-25X-20ML 73AA05N-1 73AA05N-10X-20ML 73AA05N-5 73AA06N-1 73AA06N-10X-20ML 73AA06N-25X-20ML 73AA06N-5 73AA07W-1 73AA07W-10X-20ML 73AA07W-5 73AA08N-1 73AA08N-5 73AA08N-10X-20ML 73AA08N-25X-20ML 73AA09N-1 73AA09N-5 73AA09N-1 26AA09N-10X-20ML 73AA09N-25X-20ML 73AA09N-5 26AA11N-1 73AA11N-10X-20ML 73AA11N-25X-20ML 73AA11N-5 73AA12N-1 73AA12N-10X-20ML 73AA12N-25X-20ML 73AA12N-5 73AA13N-1 73AA13N-5 73AA13N-10X-20ML 73AA13N-25X-20ML 73AA14N-1 73AA14N-5 73AA14N-10X-20ML 73AA14N-25X-20ML 73AA15N-1 73AA15N-10X-20ML 73AA15N-25X-20ML 73AA15N-5 73AA16N-1 73AA16N-10X-20ML 73AA16N-25X-20ML 73AA16N-5 73AA17N-1 73AA17N-10X-20ML 73AA17N-25X-20ML 73AA18N-1 73AA18N-10X-20ML 73AA18N-25X-20ML 73AA18N-5 73AA19N-1 73AA19N-10X-20ML 73AA19N-25X-20ML 73AA19N-5 73AA20N-1 73AA20N-10X-20ML 73AA20N-5 73AA21W-1 73AA21W-10X-20ML 73AA21W-5 73AA22H-1 73AA22H-10X-20ML 73AA22H-25X-20ML 73AA22H-5 73AA23N-1 74AA23N-10X-20ML 74AA23N-25X-20ML 74AA23N-5 74AA24N-1 74AA24N-10X-20ML 74AA24N-25X-20ML 74AA24N-5 74AA25N-1 74AA25N-10X-20ML 74AA25N-25X-20ML 74AA25N-5 74AA26H-1 74AA26H-10X-20ML 74AA26H-5 74AA27N-1 74AA27N-5 74AA27N-1 26AA27N-10X-20ML 74AA27N-25X-20ML 74AA27N-5 26AA28N-1 74AA28N-10X-20ML 74AA28N-25X-20ML 74AA28N-5 74AA29N-1 74AA29N-10X-20ML 74AA29N-25X-20ML 74AA29N-5 74AA30N-1 17, 74AA30N-5 17, 74AA30N-10X-20ML 74AA30N-25X-20ML 74AA31N-1 74AA31N-10X-20ML 74AA31N-25X-20ML 74AA31N-5 74AA32N-1 74AA32N-5 74AA32N-10X-20ML 74AA32N-25X-20ML 74AA33N-1 74AA33N-5 74AA33N-10X-20ML 74AA33N-25X-20ML 74AA34N-1 74AA34N-10X-20ML 74AA34N-25X-20ML 74AA34N-5 74AA35W-1 74AA35W-10X-20ML 74AA35W-25X-20ML 74AA35W-5 74AA36N-1 74AA36N-10X-20ML 74AA36N-25X-20ML 74AA36N-5 74AA37N-1 26AA37N-1 74AA37N-10X-20ML 74AA37N-25X-20ML 74AA37N-5 26AA37N-5 74AA38W-1 74AA38W-10X-20ML 74AA38W-25X-20ML 74AA38W-5 74AA40H-1 74AA40H-10X-20ML 74AA40H-25X-20ML 74AA40H-5 74AA41W-1 74AA41W-10X-20ML 74AA41W-5 74AA42H-1 74AA42H-10X-20ML 74AA42H-25X-20ML 74AA42H-5 74AA43N-1 74AA43N-5 74AA43N-10X-20ML 74AA43N-25X-20ML 74AA44N-1 74AA44N-10X-20ML 74AA44N-25X-20ML 74AA44N-5 74AA45W-1 74AA45W-10X-20ML 74AA45W-25X-20ML 74AA45W-5 74AA46H-1 74AA46H-10X-20ML 74AA46H-25X-20ML 74AA46H-5 74AA47N-1 74AA47N-10X-20ML 74AA47N-25X-20ML 74AA47N-5 74AA48H-1 74AA48H-10X-20ML 74AA48H-25X-20ML 74AA48H-5 74AA49N-1 75AA49N-10X-20ML 75AA49N-25X-20ML 75AA49N-5 75AA50N-1 75AA50N-10X-20ML 75AA50N-25X-20ML 75AA50N-5 75AA51N-1 75AA51N-10X-20ML 75AA51N-25X-20ML 75AA51N-5 75AA52W-1 26, 75AA-52W-10X-20ML 75AA52W-5 26, 75AA53N-1 75AA53N-10X-20ML 75AA53N-25X-20ML 75AA53N-5 75AA54N-1 17, 75AA54N-5 17, 75AA54N-1 26AA54N-10X-20ML 75AA54N-25X-20ML 75AA54N-5 26AA55N-1 75AA55N-10X-20ML 75AA55N-25X-20ML 75AA55N-5 75AA56W-1 75AA56W-10X-20ML 75AA56W-25X-20ML 75AA56W-5 75AA57W-1 75AA57W-10X-20ML 75AA57W-25X-20ML 75AA57W-5 75AA58H-1 75AA58H-10X-20ML 75AA59N-1 75AA59N-10X-20ML 75AA59N-25X-20ML 75AA59N-5 75AA60N-1 75AA60N-10X-20ML 75AA60N-25X-20ML 75AA60N-5 75AA61N-1 75AA61N-5 75AA62N-1 75AA62N-10X-20ML 75AA62N-25X-20ML 75AA62N-5 75AA63H-1 75AA63H-5 75AA63N-10X-20ML 75AA63N-25X-20ML 75AA64W-1 75AA64W-10X-20ML 75AA64W-5 75AA65W-1 75AA65W-10X-20ML 75AA65W-5 75AA66N-1 75AA66N-5 75AA67N-1 26, 75AA67N-10X-20ML 75AA67N-25X-20ML 75AA67N-5 26, 75AA68N-1 75AA68N-10X-20ML 75AA68N-25X-20ML 75AA68N-5 75AA69N-1 75AA69N-10X-20ML 75AA69N-25X-20ML 75AA69N-5 75AA70N-1 75AA70N-10X-20ML 75AA70N-25X-20ML 75AA70N-5 75AA71N-1 75AA71N-10X-20ML 75AA71N-25X-20ML 75AA71N-5 75AK-101.0-GCS 82AK-101.0-GCS-BTEX 82, 90AK-101.0-GCS-PAK 82AK-101.0-IS-10X 82AK-101.0-IS-10X-PAK 82AK-101.0-LCS 82AK-101.0-LCS-PAK 82AK-101.0-NAS-10X 82AK-101.0-NAS-10X-PAK 82AK-101.0-SS 82AK-101.0-SS-100X 82AK-101.0-SS-100X-PAK 82AK-101.0-SS-10X 82AK-101.0-SS-10X-PAK 82AK-101.0-SS-PAK 82AK-101AA-ARO 82AK-101AA-ARO-PAK 82AK-101-GSC-R1 82AK-101-GSC-R1-PAK 82AK-102.0-DCS 83AK-102.0-DCS-10X 83AK-102.0-DCS-10X-PAK 83AK-102.0-DCS-PAK 83AK-102.0-DCS-R1-10X 83AK-102.0-DCS-R1-10X-PAK 83AK-102.0-IS 83AK-102.0-IS-PAK 83AK-102.0-LCS 83AK-102.0-LCS-10X 83AK-102.0-LCS-10X-PAK 83AK-102.0-LCS-PAK 83AK-102.0-LCS-R1-10X 83AK-102.0-LCS-R1-10X-PAK 83AK-102.0-NAS-10X 83, 86AK-102.0-NAS-10X-PAK 83, 86AK-102.0-SS 83AK-102.0-SS-10X 83, 85AK-102.0-SS-10X-PAK 83, 85AK-102.0-SS-PAK 83AK-102/103AA-RT 84AK-102/103AA-RT-PAK 84AK-102/103AA-SS 84AK-102/103AA-SS-PAK 84AK-102AA-DRO 84AK-102AA-DRO-PAK 84AK-103.0-LCS 84AK-103.0-LCS-5X 84AK-103.0-LCS-5X-PAK 84AK-103.0-LCS-PAK 84AK-103.0-RCS 84AK-103.0-RCS-PAK 84AK-103.0-SS-PAK 84AK-103AA-RRO 84AK-103AA-RRO-PAK 84ASTM-D2887 14ASTM-D2887 95ASTM-D3710 20ASTM-D3710-PAK 20ASTM-E1387 98ASTM-E1387-PAK 98ASTM-E1618 98ASTM-E1618-PAK 98ASTM-FUEL-QCS-01-PAK 1,40ASTM-FUEL-QCS-02-PAK 1,40ASTM-P-0010-PAK 11ASTM-P-0020-PAK 11ASTM-P-0030 12,13ASTM-P-0031 13ASTM-P-0032 13ASTM-P-0033 13ASTM-P-0034 13ASTM-P-0035 13ASTM-P-0036 12ASTM-P-0037 12ASTM-P-0038 14ASTM-P-0050 15ASTM-P-0051N-2G 56ASTM-P-0051N-2G 15ASTM-P-0052 15ASTM-P-0052-PAK 15ASTM-P-0053N-2G 56ASTM-P-0053N-2G 15ASTM-P-0061-SET 37ASTM-P-0062-SET 37ASTM-P-0063-SET 37ASTM-P-0064-SET 37ASTM-P-0065-SET 37ASTM-P-0066-SET 37ASTM-P-0067-SET 37ASTM-P-0068-SET 37ASTM-P-0069-SET 37ASTM-P-0070-10X 23, 40ASTM-P-0070-1X 23, 40ASTM-P-0070-20X 23, 40ASTM-P-0070-2X 23, 40ASTM-P-0070-4X 23, 40ASTM-P-0070-BL 23, 40ASTM-P-0070-SET 23, 40ASTM-P-0071-01 23, 40ASTM-P-0071-02 23, 40ASTM-P-0071-03 23, 40ASTM-P-0071-BL 23, 40ASTM-P-0071-SET 23, 40ASTM-P-0080 55ASTM-P-0080-PAK 55ASTM-P-0081 55ASTM-P-0081-PAK 55ASTM-P-0082 55ASTM-P-0082-PAK 55ASTM-P-0082-R1 55ASTM-P-0082-R1-PAK 55ASTM-P-0090-01 66ASTM-P-0090-02 66ASTM-P-0090-03 66ASTM-P-0090-04 66ASTM-P-0090-05 66ASTM-P-0090-06 66ASTM-P-0090-07 66ASTM-P-0090-08 66ASTM-P-0090-09 66ASTM-P-0090-10 66INDEXi


INDEXiiASTM-P-0090-11 66ASTM-P-0090-12 66ASTM-P-0090-13 66ASTM-P-0090-14 66ASTM-P-0090-15 66ASTM-P-0090-16 66ASTM-P-0090-SET 66ASTM-P-0091-01-10X 38ASTM-P-0091-02-10X 38ASTM-P-0091-03-10X 38ASTM-P-0091-04-10X 38ASTM-P-0091-05-10X 38ASTM-P-0091-06-10X 38ASTM-P-0091-07-10X 38ASTM-P-0091-08-10X 38ASTM-P-0091-09-10X 38ASTM-P-0091-10-10X 38ASTM-P-0091-10X-SET 38ASTM-P-0091-11-10X 38ASTM-P-0091-12-10X 38ASTM-P-0091-13-10X 38ASTM-P-0091-14-10X 38ASTM-P-0091-15-10X 38ASTM-P-0091-16-10X 38ASTM-P-0091-17-10X 38ASTM-P-0091-18-10X 38ASTM-P-0091-19-10X 38ASTM-P-0091-20-10X 38ASTM-P-0091-21-10X 38ASTM-P-0091-22-10X 38ASTM-P-0092-0.1X 66ASTM-P-0092-100X 66ASTM-P-0092-10X 66ASTM-P-0092-1X 66ASTM-P-0092-500X 66ASTM-P-0092-5X 66ASTM-P-0092-BL 66ASTM-P-0092-SET 66ASTM-P-0100-01 62ASTM-P-0100-02 62ASTM-P-0100-03 62ASTM-P-0100-04 62ASTM-P-0100-05 62ASTM-P-0100-06 62ASTM-P-0100-07 62ASTM-P-0100-08 62ASTM-P-0100-09 62ASTM-P-0100-10 62ASTM-P-0100-11 62ASTM-P-0100-12 62ASTM-P-0100-SET 62ASTM-P-0101-01 62ASTM-P-0101-02 62ASTM-P-0101-03 62ASTM-P-0101-04 62ASTM-P-0101-05 62ASTM-P-0101-06 62ASTM-P-0101-07 62ASTM-P-0101-08 62ASTM-P-0101-09 62ASTM-P-0101-10 62ASTM-P-0101-11 62ASTM-P-0101-12 62ASTM-P-0102-01 62ASTM-P-0102-02 62ASTM-P-0102-03 62ASTM-P-0102-04 62ASTM-P-0102-05 62ASTM-P-0102-06 62ASTM-P-0102-07 62ASTM-P-0102-08 62ASTM-P-0102-09 62ASTM-P-0102-10 62ASTM-P-0102-11 62ASTM-P-0102-12 62ASTM-P-0102-SET 39ASTM-P-0102-SET 62ASTM-P-0103-01 39ASTM-P-0103-01 62ASTM-P-0103-02 39ASTM-P-0103-02 62ASTM-P-0103-03 39ASTM-P-0103-03 62ASTM-P-0103-04 39ASTM-P-0103-04 62ASTM-P-0103-05 39ASTM-P-0103-05 62ASTM-P-0103-06 39ASTM-P-0103-06 62ASTM-P-0103-07 39ASTM-P-0103-07 62ASTM-P-0103-08 39ASTM-P-0103-08 62ASTM-P-0103-09 39ASTM-P-0103-09 62ASTM-P-0103-10 39ASTM-P-0103-10 62ASTM-P-0103-11 39ASTM-P-0103-11 62ASTM-P-0103-12 39ASTM-P-0103-12 62ASTM-P-0103-SET 39ASTM-P-0103-SET 62ASTM-P-0104-01 62ASTM-P-0104-02 62ASTM-P-0104-03 62ASTM-P-0104-04 62ASTM-P-0104-05 62ASTM-P-0104-06 62ASTM-P-0104-07 62ASTM-P-0104-08 62ASTM-P-0104-09 62ASTM-P-0105-01 62ASTM-P-0105-02 62ASTM-P-0105-03 62ASTM-P-0105-04 62ASTM-P-0105-05 62ASTM-P-0105-06 62ASTM-P-0105-07 62ASTM-P-0106-01 62ASTM-P-0106-02 62ASTM-P-0106-03 62ASTM-P-0106-04 62ASTM-P-0106-05 62ASTM-P-0106-06 62ASTM-P-0106-07 62ASTM-P-0107-5 62ASTM-P-0108-01 63ASTM-P-0108-02 63ASTM-P-0108-03 63ASTM-P-0108-04 63ASTM-P-0108-05 63ASTM-P-0108-06 63ASTM-P-0108-07 63ASTM-P-0108-08 63ASTM-P-0108-09 63ASTM-P-0108-10 63ASTM-P-0108-11 63ASTM-P-0108-12 63ASTM-P-0108-13 63ASTM-P-0108-14 63ASTM-P-0108-15 63ASTM-P-0108-16 63ASTM-P-0108-17 63ASTM-P-0108-SET 63ASTM-P-0109-01 63ASTM-P-0109-02 63ASTM-P-0109-03 63ASTM-P-0109-04 63ASTM-P-0109-05 63ASTM-P-0109-06 63ASTM-P-0109-07 63ASTM-P-0109-08 63ASTM-P-0109-09 63ASTM-P-0109-10 63ASTM-P-0109-11 63ASTM-P-0109-12 63ASTM-P-0109-13 63ASTM-P-0109-14 63ASTM-P-0109-15 63ASTM-P-0109-16 63ASTM-P-0109-17 63ASTM-P-0109-SET 63ASTM-P-0110-01 63ASTM-P-0110-02 63ASTM-P-0110-03 63ASTM-P-0110-04 63ASTM-P-0110-05 63ASTM-P-0110-06 63ASTM-P-0110-07 63ASTM-P-0110-08 63ASTM-P-0110-09 63ASTM-P-0110-10 63ASTM-P-0110-11 63ASTM-P-0110-12 63ASTM-P-0110-13 63ASTM-P-0110-14 63ASTM-P-0110-15 63ASTM-P-0110-16 63ASTM-P-0110-17 63ASTM-P-0110-SET 25ASTM-P-0110-SET 63ASTM-P-0111-01 63ASTM-P-0111-02 63ASTM-P-0111-03 63ASTM-P-0111-04 63ASTM-P-0111-05 63ASTM-P-0111-06 63ASTM-P-0111-07 63ASTM-P-0111-08 63ASTM-P-0111-09 63ASTM-P-0111-10 63ASTM-P-0111-11 63ASTM-P-0111-12 63ASTM-P-0111-13 63ASTM-P-0111-14 63ASTM-P-0111-15 63ASTM-P-0111-16 63ASTM-P-0111-17 63ASTM-P-0111-SET 63ASTM-P-0112-01 63ASTM-P-0112-02 63ASTM-P-0112-03 63ASTM-P-0112-04 63ASTM-P-0112-05 63ASTM-P-0112-06 63ASTM-P-0112-07 63ASTM-P-0112-08 63ASTM-P-0112-09 63ASTM-P-0112-10 63ASTM-P-0112-11 63ASTM-P-0112-12 63ASTM-P-0112-13 63ASTM-P-0112-14 63ASTM-P-0112-15 63ASTM-P-0112-16 63ASTM-P-0112-17 63ASTM-P-0112-SET 63ASTM-P-0113-01 22, 63ASTM-P-0113-02 22, 63ASTM-P-0113-03 22, 63ASTM-P-0113-04 22, 63ASTM-P-0113-05 22, 63ASTM-P-0113-06 22, 63ASTM-P-0113-07 22, 63ASTM-P-0113-08 22, 63ASTM-P-0113-09 22, 63ASTM-P-0113-10 22, 63ASTM-P-0113-11 22, 63ASTM-P-0113-12 22, 63ASTM-P-0113-13 22, 63ASTM-P-0113-14 22, 63ASTM-P-0113-15 22, 63ASTM-P-0113-16 22, 63ASTM-P-0113-17 22, 63ASTM-P-0113-SET 22, 63ASTM-P-0114-01 58, 64ASTM-P-0114-02 58, 64ASTM-P-0114-03 58, 64ASTM-P-0114-04 58, 64ASTM-P-0114-05 58, 64ASTM-P-0114-06 58, 64ASTM-P-0114-07 58, 64ASTM-P-0114-08 58, 64ASTM-P-0114-09 58, 64ASTM-P-0114-10 58, 64ASTM-P-0114-11 58, 64ASTM-P-0114-12 58, 64ASTM-P-0114-13 58, 64ASTM-P-0114-14 58, 64ASTM-P-0114-15 58, 64ASTM-P-0114-16 58, 64ASTM-P-0114-17 58, 64ASTM-P-0114-SET 58, 64ASTM-P-0115-01 64ASTM-P-0115-02 64ASTM-P-0115-03 64ASTM-P-0115-04 64ASTM-P-0115-05 64ASTM-P-0115-06 64ASTM-P-0115-07 64ASTM-P-0115-08 64ASTM-P-0115-09 64ASTM-P-0115-10 64ASTM-P-0115-11 64ASTM-P-0115-12 64ASTM-P-0115-13 64ASTM-P-0115-14 64ASTM-P-0115-15 64ASTM-P-0115-16 64ASTM-P-0115-17 64ASTM-P-0115-SET 64ASTM-P-0116-01 64ASTM-P-0116-02 64ASTM-P-0116-03 64ASTM-P-0116-04 64ASTM-P-0116-05 64ASTM-P-0116-06 64ASTM-P-0116-07 64ASTM-P-0116-08 64ASTM-P-0116-09 64ASTM-P-0116-10 64ASTM-P-0116-11 64ASTM-P-0116-SET 64ASTM-P-0117-01 58ASTM-P-0117-01 64ASTM-P-0117-02 58ASTM-P-0117-02 64ASTM-P-0117-03 58ASTM-P-0117-03 64ASTM-P-0117-04 58ASTM-P-0117-04 64ASTM-P-0117-05 58ASTM-P-0117-05 64ASTM-P-0117-06 58ASTM-P-0117-06 64ASTM-P-0117-07 58ASTM-P-0117-07 64ASTM-P-0117-08 58ASTM-P-0117-08 64ASTM-P-0117-09 58ASTM-P-0117-09 64ASTM-P-0117-10 58ASTM-P-0117-10 64ASTM-P-0117-SET 58ASTM-P-0117-SET 64ASTM-P-0118-01 64ASTM-P-0118-02 64ASTM-P-0118-03 64ASTM-P-0118-04 64ASTM-P-0118-05 64ASTM-P-0118-06 64ASTM-P-0118-07 64ASTM-P-0118-08 64ASTM-P-0118-09 64ASTM-P-0118-10 64ASTM-P-0119-01 65ASTM-P-0119-02 65ASTM-P-0119-03 65ASTM-P-0119-04 65ASTM-P-0119-05 65ASTM-P-0119-06 65ASTM-P-0119-07 65ASTM-P-0119-08 65ASTM-P-0119-09 65ASTM-P-0119-10 65ASTM-P-0119-11 65ASTM-P-0119-12 65ASTM-P-0119-13 65ASTM-P-0119-14 65ASTM-P-0119-15 65ASTM-P-0119-16 65ASTM-P-0119-17 65ASTM-P-0119-18 65ASTM-P-0119-19 65ASTM-P-0119-20 65ASTM-P-0119-21 65ASTM-P-0119-22 65ASTM-P-0119-SET 65ASTM-P-0120-01 65ASTM-P-0120-02 65ASTM-P-0120-03 65ASTM-P-0120-04 65ASTM-P-0120-05 65ASTM-P-0120-06 65ASTM-P-0120-07 65ASTM-P-0120-08 65ASTM-P-0120-09 65ASTM-P-0120-10 65ASTM-P-0120-11 65ASTM-P-0120-12 65ASTM-P-0120-13 65ASTM-P-0120-14 65ASTM-P-0120-15 65ASTM-P-0120-16 65ASTM-P-0120-17 65ASTM-P-0120-18 65ASTM-P-0120-19 65ASTM-P-0120-20 65ASTM-P-0120-21 65ASTM-P-0120-22 65ASTM-P-0120-23 65ASTM-P-0120-SET 65ASTM-P-0121-01 65ASTM-P-0121-02 65ASTM-P-0121-03 65ASTM-P-0121-04 65ASTM-P-0121-05 65ASTM-P-0121-06 65ASTM-P-0121-07 65ASTM-P-0121-08 65ASTM-P-0121-09 65ASTM-P-0121-10 65ASTM-P-0121-11 65ASTM-P-0121-12 65ASTM-P-0121-13 65ASTM-P-0121-SET 65ASTM-P-0122-0.5 60, 65ASTM-P-0122-1 60, 65ASTM-P-0123-0.5 60, 65ASTM-P-0123-1 60, 65ASTM-P-0135 57ASTM-P-0135-PAK 57ASTM-P-0136-SET 57ASTM-P-0137N-2G 56ASTM-P-0137N-2G 15ASTM-P-0138N-2G 56ASTM-P-0138N-2G 15ASTM-P-0139 14ASTM-P-0140-01 51ASTM-P-0140-02 51ASTM-P-0140-03 51ASTM-P-0140-04 51ASTM-P-0140-05 51ASTM-P-0140-IS 51ASTM-P-0140-IS2 51ASTM-P-0140-IS2-PAK 51ASTM-P-0140-IS-PAK 51ASTM-P-0140-PES 51ASTM-P-0140-PES-PAK 51ASTM-P-0140-QC 51ASTM-P-0140-QC-PAK 51ASTM-P-124-01 32ASTM-P-124-01-VAP 29ASTM-P-124-02 32ASTM-P-124-02-VAP 29ASTM-P-124-03 32ASTM-P-124-03-VAP 29ASTM-P-124-04 32ASTM-P-124-04-VAP 29ASTM-P-124-05 32ASTM-P-124-05-VAP 29ASTM-P-124-06 32ASTM-P-124-06-VAP 29ASTM-P-124-07-VAP 29ASTM-P-125-01-VAP 29ASTM-P-125-02-VAP 29ASTM-P-126-01 3ASTM-P-126-SET 3ASTM-P-127-01 3ASTM-P-127-02 3ASTM-P-128-01 3ASTM-P-128-02 3ASTM-P-128-03 3ASTM-P-128-04 3ASTM-P-128-05 3ASTM-P-128-06 3ASTM-P-129-01 5ASTM-P-129-02 5ASTM-P-131-01 5ASTM-P-131-02 5ASTM-P-131-03 5ASTM-P-131-04 5ASTM-P-131-05 5ASTM-P-132-01 3ASTM-P-132-02 3ASTM-P-132-03 3ASTM-P-132-04 3ASTM-P-133-01 3ASTM-P-133-02 3ASTM-P-133-03 3ASTM-P-133-04 3ASTM-P-134-PAK 4ASTM-PIANO-SET 13ASTM-SSTD-A/B-SET 11ASTM-SSTDA-01 11ASTM-SSTDA-02 11ASTM-SSTDA-03 11ASTM-SSTDA-04 11ASTM-SSTDA-BL 11


ASTM-SSTDB-04 11 CLP-BLN-5 39, 52 D-4629-91-HB-CON-PAK 23 D-5453-LL-02 31 D-6296-VER2 55ASTM-SSTDB-05 11 CLP-BLN-5 71 D-4629-91-LB-0.3X 23 D-5453-LL-03 31 D-6296-VER-SET 55ASTM-SSTDB-06 11 CLP-BLN-L 39, 52 D-4629-91-LB-100X 23 D-5453-LL-04 31 D-6296-VER-SET-PAK 55ASTM-SSTDB-07 11 CLP-BLN-L 71 D-4629-91-LB-10X 23 D-5453-LL-BL 31 D-6379-SET 57ASTM-SSTDB-BL 11 CLP-BLW-5 71 D-4629-91-LB-1X 23 D-5453-LL-SET 31 D-6379-SET-PAK 57AZ-8015-DRO/ORO 85 CLP-BTEX 94 D-4629-91-LB-25X 23 D-5453-ML-01 31 D-6379-SRS 57AZ-8015-DRO/ORO-PAK 85 CLP-BTEX-10X 94 D-4629-91-LB-50X 23 D-5453-ML-02 31 D-6379-SRS-PAK 57AZ-8015-RTV 85 CLP-BTEX-10X-PAK 94 D-4629-91-LB-75X 23 D-5453-ML-03 31 D-6428-0.1X 57AZ-8015-RTV-PAK 85 CLP-BTEX-PAK 94 D-4629-91-LB-CAL-SET 23 D-5453-ML-04 31 D-6428-0.1X-4 57AZ-8015-SCS 85 D-2622-LL-1000X-4 10 D-4629-91-LB-CON 23 D-5453-ML-05 31 D-6428-0.5X 57AZ-8015-SCS-PAK 85 D-2622-LL-100X-4 10 D-4629-91-LB-CON-PAK 23 D-5453-ML-BL 31 D-6428-0.5X-4 57BOOK-TPH 12 D-2622-LL-10X-4 10 D-4815/IS-SET 24 D-5453-ML-SET 31 D-6428-100X 57BOOK-TPH 93 D-2622-LL-1100X-4 10 D-4815/IS-SET-PAK 24 D-5480-CR-100X-PAK 32 D-6428-100X-4 57C-216N 21 D-2622-LL-1200X-4 10 D-4815-RT 24 D-5480-CR-PAK 32 D-6428-10X 57C-216S 54 D-2622-LL-200X-4 10 D-4815-RT-PAK 24 D-5480-IS-5ML 32 D-6428-10X-4 57C-216S-H-10X 54 D-2622-LL-300X-4 10 D-4815-SET-10ML 24 D-5480-IS-5ML-PAK 32 D-6428-1X 57C-216S-M 54 D-2622-LL-30X-4 10 D-4815-VT 24 D-5501-94-01 32 D-6428-1X-4 57C-216-ST-1 21 D-2622-LL-400X-4 10 D-4815-VT-PAK 24 D-5501-94-02 32 D-6428-2.5X 57C-216-ST-1-PAK 21 D-2622-LL-500X-4 10 D-4929-94 25 D-5501-94-03 32 D-6428-2.5X-4 57C-216-ST-2 21 D-2622-LL-50X-4 10 D-4929-94-100X 25 D-5501-94-04 32 D-6428-25X 57C-216-ST-2-PAK 21 D-2622-LL-5X-4 10 D-4929-94-100X-PAK 25 D-5501-94-05 32 D-6428-25X-4 57C-221N 21 D-2622-LL-600X-4 10 D-4929-94-PAK 25 D-5501-94-06 32 D-6428-50X 57C-221S 54 D-2622-LL-700X-4 10 D-5059-A-01 27 D-5501-94-07 32 D-6428-50X-4 57C-221S-H-10X 54 D-2622-LL-75X-4 10 D-5059-A-02 27 D-5580-95-CAL-IS-SET 32 D-6428-5X 57C-221S-M 54 D-2622-LL-800X-4 10 D-5059-A-03 27 D-5580-95-CAL-SET-10ML 32 D-6428-5X-4 57C-221-ST-1 21 D-2622-LL-900X-4 10 D-5059-A-04 27 D-5580-QC 33 D-6428-75X 57C-221-ST-1-PAK 21 D-2622-LL-BL-4 10 D-5059-A-05 27 D-5580-QC-PAK 33 D-6428-75X-4 57C-221-ST-2 21 D-2622-LL-CAL-SET 10 D-5059-A-06 27 D-5580-QC-R1 33 D-6428-BL 57C-221-ST-2-PAK 21 D-2789-CTM 11 D-5059-A-07 27 D-5580-QC-R1-PAK 33 D-6428-BL-4 57C-232N 21 D-2789-CTM-PAK 11 D-5059-A-CAL-SET 27 D-5600-01-1 37 D-6428-R1-4-SET 57C-232S 54 D-2887-REFOIL 14 D-5059-C-01 27 D-5600-BLH-5 37 D-6428-R1-SET 57C-232S-H-10X 54 D-3120-92-100X 10, 16 D-5059-C-02 27 D-5600-BLH-L 37 D-6428-R2-4-SET 57C-232S-M 54 D-3120-92-10X 10, 16 D-5059-C-03 27 D-5600-LIB-1 37 D-6428-R2-SET 57C-232-ST-1 21 D-3120-92-1X 10, 16 D-5059-C-04 27 D-5600-LIB-5 37 D-6550-CONC 58C-232-ST-1-PAK 21 D-3120-92-30X 10, 16 D-5059-C-05 27 D-5708-A-10X 39 D-6550-CONC-5ML 58C-232-ST-2 21 D-3120-92-3X 10, 16 D-5059-C-06 27 D-5708-B-10X-1 39 DRH/GRH-FL-SS 86C-232-ST-2-PAK 21 D-3120-92-50X 10, 16 D-5059-C-07 27 D-5708-B-10X-5 39 DRH/GRH-FL-SS-PAK 86C-242N 21 D-3120-92-75X 10, 16 D-5059-C-CAL-SET 27 D-5708-B-5 39 DRH/GRH-FL-SS-R2 86C-242S 54 D-3120-92-BL 10 D-5059-IS-10ML-PAK 27 D-5762-95-100X 40 DRH/GRH-FL-SS-R2-PAK 86C-242S-H-10X 54 D-3120-92-CAL-SET 10, 16 D-5059-IS-4 27 D-5762-95-10X 40 DRH-001S 95C-242S-M 54 D-3120-BL 16 D-5134-92-ALK 27 D-5762-95-1X 40 DRH-001S-10X 95C-242-ST-1 21 D-3230-89-1 16 D-5134-92-CEM 27 D-5762-95-500X-PAK 40 DRH-002N 56C-242-ST-1-PAK 21 D-3230-89-5 16 D-5134-92-LCM 27 D-5762-95-50X 40 DRH-002N 14C-242-ST-2 21 D-3237-01 16 D-5134-92-NAP 27 D-5762-95-5X 40 DRH-002N-10X 56C-242-ST-2-PAK 21 D-3237-02 16 D-5134-92-REF 27 D-5762-95-BL 40 DRH-002N-10X 14C-248N 21 D-3237-03 16 D-5134-92-SET 27 D-5762-95-CAL-SET 40 DRH-002S 95C-248S 54 D-3237-04 16 D-5184-91-AL-1 28 D-5769-ADD/IS 47 DRH-002S-R1 14, 20C-248S-H-10X 54 D-3237-CAL-SET 16 D-5184-91-AL-5 28 D-5769-ADD/IS-R 48 DRH-002S-R1-PAK 14, 20C-248S-M 54 D-3524-CAL-SET-10ML 17 D-5184-91-SI-1 28 D-5769-ADD/IS-R2 49 DRH-002S-R2 14C-248-ST-1 21 D-3524-CAL-SET-5ML 17 D-5184-91-SI-5 28 D-5769-ADD-10ML 46 DRH-002S-R2-PAK 14C-248-ST-1-PAK 21 D-3524-CR 17 D-5184-91-TA-5 28 D-5769-ADD-5ML 46 DRH-003S 95C-248-ST-2 21 D-3524-CR-PAK 17 D-5186-96-DLC-25X 28 D-5769-CAL/IS-R2-SET 49 DRH-004S-5X 86, 95C-248-ST-2-PAK 21 D-3524-IS-10ML 17 D-5186-96-DLC-50X 28 D-5769-CAL/IS-R-SET 48 DRH-004S-5X-PAK 86C-254N 21 D-3524-IS-10ML-PAK 17 D-5186-96-DLC-SET 28 D-5769-CAL/IS-SET 47 DRH-005S-10X 14C-254S 54 D-3524-QC-10ML 17 D-5186-96-PM 28 D-5769-CAL-SET-10ML 46 DRH-005S-10X 95C-254S-H-10X 54 D-3605-91-1 17 D-5186-96-PM-PAK 28 D-5769-CAL-SET-5ML 46 DRH-006-CAL-10X 87C-254S-M 54 D-3606/IS2-SET 18 D-5307-CR 29 D-5769-QC/IS-5ML 47 DRH-006-CAL-1X 87C-254-ST-1 21 D-3606/IS2-SET-PAK 18 D-5307-CR-PAK 29 D-5769-QC/IS-5ML-PAK 47 DRH-006-CAL-20X 87C-254-ST-1-PAK 21 D-3606/IS-SET 18 D-5307-IS-10ML 29 D-5769-QC/IS-R2-5ML 49 DRH-006-CAL-40X 87C-254-ST-2 21 D-3606/IS-SET-2ML 18 D-5307-IS-10ML-PAK 29 D-5769-QC/IS-R2-5ML-PAK 49 DRH-006-CAL-4X 87C-254-ST-2-PAK 21 D-3606/IS-SET-2ML-PAK 18 D-5307-QUAL 29 D-5769-QC/IS-R-5ML 48 DRH-006-CAL-SET 87C-260N 21 D-3606-QC/IS-10ML 18 D-5307-QUAL-PAK 29 D-5769-QC/IS-R-5ML-PAK 48 DRH-006S 87C-260S 54 D-3606-QC/IS-10ML-PAK 18 D-5307-QUANT 29 D-5769-QC-10ML 46 DRH-006S-PAK 87C-260S-H-10X 54 D-3606-QC-25ML 18 D-5307-QUANT-PAK 29 D-5769-QC-10ML-PAK 46 DRH-006-SS 88, 91C-260S-M 54 D-3606-QC-25ML-PAK 18 D-5441 30 D-5863-95A-10X-1 52 DRH-006-SS-PAK 88, 91C-260-ST-1 21 D-3606-QC-IS2-25ML 18 D-5441-10X 30 D-5863-95B-10X 52 DRH-007-CAL-10X 87C-260-ST-1-PAK 21 D-3606-QC-IS2-25ML-PAK 18 D-5441-10X-5ML 30 D-611-01 4 DRH-007-CAL-1X 87C-260-ST-2 21 D-3606-SET-25ML 18 D-5441-10X-5ML-PAK 30 D-611-02 4 DRH-007-CAL-20X 87C-260-ST-2-PAK 21 D-3610-93-1 18 D-5441-10X-PAK 30 D-611-03 4 DRH-007-CAL-40X 87C-262N 21 D-3710-QUAL 20 D-5441-5ML 30 D-611-04 4 DRH-007-CAL-4X 87C-262S 54 D-3710-QUAL-PAK 20 D-5441-5ML-PAK 30 D-611-05 4 DRH-007-CAL-SET 87C-262S-H-10X 54 D-3798-10ML 20 D-5441-PAK 30 D-611E-01 4 DRH-007S 87C-262S-M 54 D-3798-10ML-PAK 20 D-5441-QUAL 30 D-611E-02 4 DRH-007S-PAK 87C-262-ST-1 21 D-3798-IS 20 D-5441-QUANT 30 D-611E-03 4 DRH-007-SS 87, 91C-262-ST-1-PAK 21 D-3798-IS-PAK 20 D-5441-RES 30 D-611E-SET 4 DRH-007-SS-PAK 87, 91C-262-ST-2 21 D-3831 20 D-5441-RES-5ML 30 D-611-SET 4 DRH-008S-R1 14, 56, 86, 95C-262-ST-2-PAK 21 D-4291-93 21 D-5441-RES-5ML-PAK 30 D-6258-01 54 DRH-008S-R1-PAK 14, 56, 86,C-268N 21 D-4291-93-PAK 21 D-5441-RES-PAK 30 D-6258-02 5495C-268S 54 D-4420-94 22 D-5442-CR-PAK 31 D-6258-03 54 DRH-009S 85C-268S-H-10X 54 D-4420-94-PAK 22 D-5442-PAK 31 D-6258-04 54 DRH-009S-PAK 85C-268S-M 54 D-4420-CAL-SET 22 D-5442-RT1 31 D-6258-05 54 DRH-010S 97C-268-ST-1 21 D-4629-91-HB-0.3X 23 D-5442-RT2 31 D-6258-BL 54 DRH-010S-PAK 97C-268-ST-1-PAK 21 D-4629-91-HB-100X 23 D-5443-93-HTM 31 D-6258-CAL-SET-5ML 54 DRH-FL-SS 86C-268-ST-2 21 D-4629-91-HB-10X 23 D-5453-HL-01 31 D-6258-CONC-5ML 54 DRH-FL-SS-3X 86C-268-ST-2-PAK 21 D-4629-91-HB-1X 23 D-5453-HL-02 31 D-6296-BL 55 DRH-FL-SS-3X-PAK 86CAR-DNPH 98 D-4629-91-HB-25X 23 D-5453-HL-03 31 D-6296-CAL1 55 DRH-FL-SS-PAK 86CLP-BLH-5 71 D-4629-91-HB-50X 23 D-5453-HL-04 31 D-6296-CAL1-PAK 55 DRH-FTRPH 86, 95CLP-BLH-L 71 D-4629-91-HB-75X 23 D-5453-HL-BL 31 D-6296-CAL2 55 DRH-FTRPH2 95CLP-BLMA-5 71 D-4629-91-HB-CAL-SET 23 D-5453-HL-SET 31 D-6296-CAL2-PAK 55 DRH-FTRPH2-PAK 95CLP-BLMA-L 71 D-4629-91-HB-CON 23 D-5453-LL-01 31 D-6296-VER1 55 DRH-FTRPH-PAK 86, 95 iiiINDEX


INDEXivDRH-FTRPH-SET 95DRH-FTRPH-SET-PAK 95DRH-MA-FSS-10ML 88DRH-MA-FSS-50X 88DRH-MA-FSS-50X-PAK 88DRH-MA-MS 87DRH-MA-MS-10X 87DRH-MA-MS-10X-PAK 87DRH-MA-MS-40X 87DRH-MA-MS-40X-PAK 87DRH-MA-MS-PAK 87DRH-MA-SS 87, 91DRH-MA-SS-100X 87, 91DRH-MA-SS-100X-PAK 87, 91DRH-MA-SS-10X 87, 91DRH-MS-ASL 88DRH-MS-ASL-PAK 88DRH-PA-001 89DRH-PA-001-PAK 89DRH-SS 86DRH-SS-PAK 86DRH-TX-001-10X 89DRH-TX-001-10X-PAK 89DRH-TX-002-10X 89DRH-TX-002-10X-PAK 89DRH-TX-002-D-0.4X-10ML 89DRH-TX-002-D-40X 89DRH-TX-002-D-40X-PAK 89DRH-TX-002-D-SET 89DRH-TX-003-CNM 89DRH-TX-003-CNM-PAK 89DRH-TX-003-FCS 89DRH-TX-003-FCS-PAK 89DRH-TX-003-SET 89DRH-TX-003-SS1 89DRH-TX-003-SS1-PAK 89FD2-W25-10X 93FD2-W25-R1-10X 93FD2-W50-10X 93FD2-W50-R1-10X 93FD2-W75-10X 93FD2-W75-R1-10X 93FIA-ARO 4FIA-ARO-5ML 4FIA-CAL-SET 4FIA-OLE 4FIA-OLE-5ML 4FIA-PAR 4FIA-PAR-5ML 4FK-W25-10X 93FK-W50-10X 93FK-W75-10X 93FU-001 92FU-001-40X 92FU-001-D-40X 92FU-002 92FU-002-40X 92FU-002-D-40X 92FU-003 92FU-003-40X 92FU-003-D-40X 92FU-004 92FU-004-40X 92FU-004-D-40X 92FU-005 92FU-005-40X 92FU-005-D-10X 93FU-005-D-40X 92FU-006 92FU-006-40X 92FU-006-D-40X 92FU-007 92FU-007-40X 92FU-007-D-40X 92FU-008 92FU-008-40X 92FU-008-D-40X 92FU-009 92FU-009-40X 92FU-009-D-10X 93FU-009-D-40X 92FU-010 92FU-010-40X 92FU-010-D-40X 92FU-011 92FU-011-40X 92FU-011-D-40X 92FU-012 92FU-012-40X 92FU-012-D-40X 92FU-013 92FU-013-40X 92FU-013-D-40X 92FU-014 92FU-014-40X 92FU-014-D-40X 92FU-015 92FU-015-40X 92FU-015-D-40X 92FU-016 92FU-016-40X 92FU-016-D-40X 92FU-017 92FU-017-40X 92FU-017-D-10X 93FU-017-D-40X 92FU-018-D-40X 92FU-018-H 92FU-018-H-40X 92FU-019-D-40X 92FU-019-H 92FU-019-H-40X 92FU-020-D-40X 92FU-020-H 92FU-020-H-40X 92FU-021-D-40X 92FU-021-H 92FU-021-H-40X 92FU-022 92FU-022-40X 92FU-022-D-40X 92FU-023 92FU-023-40X 92FU-023-D-40X 92FU-025-D-40X 93FU-025-H 93FU-025-H-40X 93FU-026-D-40X 93FU-026-H 93FU-026-H-40X 93FU-027-D-40X 93FU-027-H 93FU-027-H-40X 93FU-028-D-40X 93FU-028-H 93FU-028-H-40X 93GA-001 92GA-001-10X 93GA-001-20X-BTEX 82, 88, 90,94GA-001-40X 92GA-001-D-40X 92GA-002 92GA-002-40X 92GA-002-D-40X 92GA-003 92GA-003-40X 92GA-003-D-40X 92GA-004 92GA-004-40X 92GA-004-D-40X 92GA-005 92GA-005-40X 92GA-005-D-40X 92GAD-001 94GAD-001-PAK 94GARH-IS 94GARH-SS 94GA-W25-10X 93GA-W50-10X 93GA-W75-10X 93GRH-001S 94GRH-001S-PAK 94GRH-002S 94GRH-003S 91, 94GRH-003S-PAK 91, 94GRH-004-MS 88GRH-004-MS-100X 88GRH-004-MS-100X-PAK 88GRH-004-MS-10X 88GRH-004-MS-10X-PAK 88GRH-004-MS-PAK 88GRH-004S/SS 88GRH-004S/SS-PAK 88GRH-004S-10X 88GRH-004S-10X-PAK 88GRH-004-SS 88, 90GRH-004-SS-100X 88, 90GRH-004-SS-100X-PAK 88, 90GRH-004-SS-10X 88, 90GRH-004-SS-10X-PAK 88, 90GRH-004-SS-PAK 88, 90GRH-IS 85-86, 88, 91, 95GRH-IS-10X 88, 91GRH-IS-PAK 85-86, 88, 91, 95GRH-PA-001 89GRH-PA-001-PAK 89GRH-SS 85-86, 95GRH-SS-PAK 85-86, 95HS-001N 92HS-001S 92HS-001S-40X 92HS-001S-D-40X 92HS-002N 92HS-002S 92HS-002S-40X 92HS-002S-D-40X 92HS-003N 92HS-003S 92HS-003S-40X 92HS-003S-D-40X 92HS-004N 92HS-004S 92HS-004S-40X 92HS-004S-D-40X 92HS-005N 92HS-005S 92HS-005S-40X 92HS-005S-D-40X 92IC-ACET-10X-1 79IC-ACET-10X-5 79IC-ACET-1X-1 79IC-ACET-1X-5 79IC-AN-KIT-10X-1 76IC-AN-KIT-10X-5 76IC-AN-KIT-1X-1 76IC-AN-KIT-1X-5 76IC-AN-KIT-2X-1 76IC-AN-KIT-2X-5 76IC-AN-KIT-R-10X-1 79IC-AN-KIT-R-10X-5 79IC-BA-10X-1 78IC-BA-10X-5 78IC-BA-1X-1 78IC-BA-1X-5 78IC-BA-2X-1 78IC-BA-2X-5 78IC-BR-10X-1 76IC-BR-1X-1 76IC-BR-1X-5 76IC-BR-2X-1 76IC-BR-2X-5 76IC-CA-10X-1 78IC-CA-10X-5 78IC-CA-1X-1 78IC-CA-1X-5 78IC-CA-2X-1 78IC-CA-2X-5 78IC-CAT-KIT-10X-1 78IC-CAT-KIT-10X-5 78IC-CAT-KIT-1X-1 78IC-CAT-KIT-1X-5 78IC-CAT-KIT-2X-1 78IC-CAT-KIT-2X-5 78IC-CHLR-10X-1 79IC-CHLR-10X-5 79IC-CHLR-1X-1 79IC-CHLR-1X-5 79IC-CHRM-10X-1 79IC-CHRM-10X-5 79IC-CHRM-1X-1 79IC-CHRM-1X-5 79IC-Cl-10X-1 76IC-Cl-10X-5 76IC-Cl-1X-1 76IC-Cl-1X-5 76IC-Cl-2X-1 76IC-Cl-2X-5 76IC-ELU-01-0.5 79IC-ELU-01-0.5-PAK 79IC-ELU-01-1 79IC-ELU-01-1-PAK 79IC-ELU-02-0.5 79IC-ELU-02-0.5-PAK 79IC-ELU-02-1 79IC-ELU-02-1-PAK 79IC-ELU-03-0.5 79IC-ELU-03-0.5-PAK 79IC-ELU-03-1 79IC-ELU-03-1-PAK 79IC-F-10X-1 76IC-F-10X-5 76IC-F-1X-1 76IC-F-1X-5 76IC-F-2X-1 76IC-FORM-10X-1 79IC-FORM-10X-5 79IC-FORM-1X-1 79IC-FORM-1X-5 79IC-K-10X-1 78IC-K-10X-5 78IC-K-1X-1 78IC-K-1X-5 78IC-K-2X-1 78IC-K-2X-5 78IC-LI-10X-1 78IC-LI-10X-5 78IC-LI-1X-1 78IC-LI-1X-5 78IC-LI-2X-1 78IC-LI-2X-5 78IC-MAN-01-1 77IC-MAN-02-1 77IC-MAN-03-1 77IC-MAN-04-1 77IC-MAN-05-R1-1 77IC-MAN-05-SET 77IC-MAN-06-R1-1 77IC-MAN-06-SET 77IC-MAN-07-R1-1 77IC-MAN-07-SET 77IC-MAN-08-R1-1 77IC-MAN-08-SET 77IC-MAN-09-R1-1 77IC-MAN-09-SET 77IC-MAN-10-R1-1 77IC-MAN-10-SET 77IC-MAN-11-1 77IC-MAN-12-1 77IC-MAN-13-1 77IC-MAN-14-R2-1 77, 79IC-MAN-14-R2-SET 77, 79IC-MAN-14-R3-1 77IC-MAN-14-SET 77IC-MAN-15-R2-1 77IC-MAN-15R-SET 77IC-MAN-16-R1-1 77IC-MAN-16-SET 77IC-MAN-17-R1-1 77IC-MAN-17-SET 77IC-MAN-18-R1-1 77IC-MAN-18-SET 77IC-MAN-CAL-SET 77IC-MCA-01-1 78IC-MCA-02-1 78IC-MCA-03-1 78IC-MCA-04-1 78IC-MCA-05-1 78IC-MCA-06-1 78IC-MG-10X-1 78IC-MG-10X-5 78IC-MG-1X-1 78IC-MG-1X-5 78IC-MG-2X-1 78IC-MG-2X-5 78IC-NA-10X-1 78IC-NA-10X-5 78IC-NA-1X-1 78IC-NA-1X-5 78IC-NA-2X-1 78IC-NA-2X-5 78IC-NH4-10X-1 78IC-NH4-10X-5 78IC-NH4-1X-1 78IC-NH4-1X-5 78IC-NH4-2X-1 78IC-NH4-2X-5 78IC-NH4-N-10X-1 79IC-NH4-N-10X-5 79IC-NH4-N-1X-1 79IC-NH4-N-1X-5 79IC-NO2-0.05X-1 77IC-NO2-0.12X-1 77IC-NO2-0.1X-1 77IC-NO2-0.2X-1 77IC-NO2-0.4X-1 77IC-NO2-0.5X-1 77IC-NO2-10X-1 76IC-NO2-10X-5 76IC-NO2-1X-1 76-77IC-NO2-1X-5 76IC-NO2-2X-1 76IC-NO2-2X-5 76IC-NO2-N-10X-1 79IC-NO2-N-10X-5 79IC-NO2-N-1X-1 77, 79IC-NO2-N-1X-5 79IC-NO3-10X-1 76IC-NO3-10X-5 76IC-NO3-1X-1 76IC-NO3-1X-5 76IC-NO3-2X-1 76IC-NO3-2X-5 76IC-NO3-N-10X-1 79IC-NO3-N-10X-5 79IC-NO3-N-1X-1 79IC-NO3-N-1X-5 79IC-OXAL-10X-1 79IC-OXAL-10X-5 79IC-OXAL-1X-1 79IC-OXAL-1X-5 79ICP-01N-0.5-10X 68ICP-01N-1 68ICP-01N-10X-20ML 68ICP-01N-1-10X 68ICP-01N-25X-20ML 68ICP-01N-5 68ICP-01N-5-10X 68ICP-02N-0.5-10X 68ICP-02N-1 68ICP-02N-10X-20ML 68ICP-02N-1-10X 68ICP-02N-5 68ICP-02N-5-10X 68ICP-03N-0.5-10X 68ICP-03N-1 68ICP-03N-10X-20ML 68ICP-03N-1-10X 68ICP-03N-25X-20ML 68ICP-03N-5 68ICP-03N-5-10X 68ICP-04N-0.5-10X 68ICP-04N-1 68ICP-04N-10X-20ML 68ICP-04N-1-10X 68ICP-04N-25X-20ML 68ICP-04N-5 68ICP-04N-5-10X 68ICP-05N-0.5-10X 68ICP-05N-1 68ICP-05N-10X-20ML 68ICP-05N-1-10X 68ICP-05N-5 68ICP-05N-5-10X 68ICP-06N-0.5-10X 68ICP-06N-1 68ICP-06N-10X-20ML 68ICP-06N-1-10X 68ICP-06N-25X-20ML 68ICP-06N-5 68ICP-06N-5-10X 68ICP-07W-0.5-10X 68ICP-07W-1 68ICP-07W-10X-20ML 68ICP-07W-1-10X 68ICP-07W-5 68ICP-07W-5-10X 68ICP-08N-0.5-10X 68ICP-08N-1 68ICP-08N-10X-20ML 68ICP-08N-1-10X 68ICP-08N-25X-20ML 68ICP-08N-5 68ICP-08N-5-10X 68ICP-09N-0.5-10X 68ICP-09N-1 68ICP-09N-10X-20ML 68ICP-09N-1-10X 68ICP-09N-25X-20ML 68ICP-09N-5 68ICP-09N-5-10X 68ICP-11N-0.5-10X 68ICP-11N-1 68ICP-11N-10X-20ML 68ICP-11N-1-10X 68ICP-11N-25X-20ML 68ICP-11N-5 68ICP-11N-5-10X 68ICP-12N-0.5-10X 68


ICP-12N-1 68 ICP-24N-5 69 ICP-37N-5 69 ICP-53N-25X-20ML 70 ICP-67N-5 71ICP-12N-10X-20ML 68 ICP-24N-5-10X 69 ICP-37N-5-10X 69 ICP-53N-5 70 ICP-67N-5-10X 71ICP-12N-1-10X 68 ICP-25N-1 69 ICP-38W-0.5-10X 70 ICP-53N-5-10X 70 ICP-68N-0.5-10X 71ICP-12N-25X-20ML 68 ICP-25N-10X-20ML 69 ICP-38W-1 70 ICP-54N-0.5-10X 70 ICP-68N-1 71ICP-12N-5 68 ICP-25N-25X-20ML 69 ICP-38W-10X-20ML 70 ICP-54N-1 70 ICP-68N-10X-20ML 71ICP-12N-5-10X 68 ICP-25N-5 69 ICP-38W-1-10X 70 ICP-54N-10X-20ML 70 ICP-68N-1-10X 71ICP-13H-0.5-10X 68 ICP-26H-0.5-10X 69 ICP-38W-25X-20ML 70 ICP-54N-1-10X 70 ICP-68N-25X-20ML 71ICP-13H-1 68 ICP-26H-1 69 ICP-38W-5 70 ICP-54N-25X-20ML 70 ICP-68N-5 71ICP-13H-1-10X 68 ICP-26H-10X-20ML 69 ICP-38W-5-10X 70 ICP-54N-5 70 ICP-68N-5-10X 71ICP-13H-5 68 ICP-26H-1-10X 69 ICP-40H-0.5-10X 70 ICP-54N-5-10X 70 ICP-69N-0.5-10X 71ICP-13H-5-10X 68 ICP-26H-25X-20ML 69 ICP-40H-1 70 ICP-55N-0.5-10X 70 ICP-69N-1 71ICP-13N-0.5-10X 68 ICP-26H-5 69 ICP-40H-10X-20ML 70 ICP-55N-1 70 ICP-69N-10X-20ML 71ICP-13N-1 68 ICP-26H-5-10X 69 ICP-40H-1-10X 70 ICP-55N-10X-20ML 70 ICP-69N-1-10X 71ICP-13N-10X-20ML 68 ICP-27N-0.5-10X 69 ICP-40H-25X-20ML 70 ICP-55N-1-10X 70 ICP-69N-25X-20ML 71ICP-13N-1-10X 68 ICP-27N-1 69 ICP-40H-5 70 ICP-55N-25X-20ML 70 ICP-69N-5 71ICP-13N-25X-20ML 68 ICP-27N-10X-20ML 69 ICP-40H-5-10X 70 ICP-55N-5 70 ICP-69N-5-10X 71ICP-13N-5 68 ICP-27N-1-10X 69 ICP-41W-0.5-10X 70 ICP-55N-5-10X 70 ICP-70N-0.5-10X 71ICP-13N-5-10X 68 ICP-27N-25X-20ML 69 ICP-41W-1 16 ICP-56W-0.5-10X 70 ICP-70N-1 71ICP-14N-0.5-10X 68 ICP-27N-5 52 ICP-41W-1 70 ICP-56W-1 70 ICP-70N-10X-20ML 71ICP-14N-1 68 ICP-27N-5 69 ICP-41W-10X-20ML 70 ICP-56W-10X-20ML 70 ICP-70N-1-10X 71ICP-14N-10X-20ML 68 ICP-27N-5-10X 69 ICP-41W-1-10X 70 ICP-56W-1-10X 70 ICP-70N-25X-20ML 71ICP-14N-1-10X 68 ICP-28N-0.5-10X 69 ICP-41W-5 16 ICP-56W-25X-20ML 70 ICP-70N-5 71ICP-14N-25X-20ML 68 ICP-28N-1 69 ICP-41W-5 70 ICP-56W-5 70 ICP-70N-5-10X 71ICP-14N-5 68 ICP-28N-10X-20ML 69 ICP-41W-5-10X 70 ICP-56W-5-10X 70 ICP-71N-0.5-10X 71ICP-14N-5-10X 68 ICP-28N-1-10X 69 ICP-42H-0.5-10X 70 ICP-57W-0.5-10X 70 ICP-71N-1 71ICP-15N-0.5-10X 68 ICP-28N-25X-20ML 69 ICP-42H-1 70 ICP-57W-1 70 ICP-71N-10X-20ML 71ICP-15N-1 68 ICP-28N-5 69 ICP-42H-10X-20ML 70 ICP-57W-10X-20ML 70 ICP-71N-1-10X 71ICP-15N-10X-20ML 68 ICP-28N-5-10X 69 ICP-42H-1-10X 70 ICP-57W-1-10X 70 ICP-71N-25X-20ML 71ICP-15N-1-10X 68 ICP-29N-0.5-10X 69 ICP-42H-25X-20ML 70 ICP-57W-25X-20ML 70 ICP-71N-5 71ICP-15N-25X-20ML 68 ICP-29N-1 69 ICP-42H-5 70 ICP-57W-5 70 ICP-71N-5-10X 71ICP-15N-5 68 ICP-29N-10X-20ML 69 ICP-42H-5-10X 70 ICP-57W-5-10X 70 ICP-MS-01N-0.01X-1 72ICP-15N-5-10X 68 ICP-29N-1-10X 69 ICP-43N-0.5-10X 70 ICP-58H-0.5-10X 71 ICP-MS-01N-0.1X-1 72ICP-16N-0.5-10X 68 ICP-29N-25X-20ML 69 ICP-43N-1 70 ICP-58H-1 71 ICP-MS-01N-1 72ICP-16N-1 68 ICP-29N-5 69 ICP-43N-10X-20ML 70 ICP-58H-10X-20ML 71 ICP-MS-02N-0.01X-1 72ICP-16N-10X-20ML 68 ICP-29N-5-10X 69 ICP-43N-1-10X 70 ICP-58H-1-10X 71 ICP-MS-02N-0.1X-1 72ICP-16N-1-10X 68 ICP-30N-0.5-10X 69 ICP-43N-25X-20ML 70 ICP-58H-5 71 ICP-MS-02N-1 72ICP-16N-25X-20ML 68 ICP-30N-1 69 ICP-43N-5 70 ICP-58H-5-10X 71 ICP-MS-03N-0.01X-1 72ICP-16N-5 68 ICP-30N-10X-20ML 69 ICP-43N-5-10X 70 ICP-59N-0.5-10X 71 ICP-MS-03N-0.1X-1 72ICP-16N-5-10X 68 ICP-30N-1-10X 69 ICP-44N-0.5-10X 70 ICP-59N-1 71 ICP-MS-03N-1 72ICP-17N-0.5-10X 68 ICP-30N-25X-20ML 69 ICP-44N-10X-20ML 70 ICP-59N-10X-20ML 71 ICP-MS-04N-0.01X-1 72ICP-17N-1 68 ICP-30N-5 69 ICP-44N-1-10X 70 ICP-59N-1-10X 71 ICP-MS-04N-0.1X-1 72ICP-17N-10X-20ML 68 ICP-30N-5-10X 69 ICP-44N-25X-20ML 70 ICP-59N-25X-20ML 71 ICP-MS-04N-1 72ICP-17N-1-10X 68 ICP-31N-0.5-10X 69 ICP-44N-5-10X 70 ICP-59N-5 71 ICP-MS-05N-0.01X-1 72ICP-17N-25X-20ML 68 ICP-31N-1 69 ICP-45W-0.5-10X 70 ICP-59N-5-10X 71 ICP-MS-05N-0.1X-1 72ICP-17N-5 68 ICP-31N-10X-20ML 69 ICP-45W-10X-20ML 70 ICP-60N-0.5-10X 71 ICP-MS-05N-1 72ICP-17N-5-10X 68 ICP-31N-1-10X 69 ICP-45W-1-10X 70 ICP-60N-1 71 ICP-MS-06N-0.01X-1 72ICP-18N-0.5-10X 68 ICP-31N-25X-20ML 69 ICP-45W-25X-20ML 70 ICP-60N-10X-20ML 71 ICP-MS-06N-0.1X-1 72ICP-18N-1 68 ICP-31N-5 69 ICP-45W-5-10X 70 ICP-60N-1-10X 71 ICP-MS-06N-1 72ICP-18N-10X-20ML 68 ICP-31N-5-10X 69 ICP-46H-0.5-10X 70 ICP-60N-25X-20ML 71 ICP-MS-08N-0.01X-1 72ICP-18N-1-10X 68 ICP-32N-0.5-10X 69 ICP-46H-10X-20ML 70 ICP-60N-5 71 ICP-MS-08N-0.1X-1 72ICP-18N-25X-20ML 68 ICP-32N-1 69 ICP-46H-1-10X 70 ICP-60N-5-10X 71 ICP-MS-08N-1 72ICP-18N-5 68 ICP-32N-10X-20ML 69 ICP-46H-25X-20ML 70 ICP-61N-1 71 ICP-MS-09N-0.01X-1 72ICP-18N-5-10X 68 ICP-32N-1-10X 69 ICP-46H-5-10X 70 ICP-61N-5 71 ICP-MS-09N-0.1X-1 72ICP-19N-0.5-10X 68 ICP-32N-25X-20ML 69 ICP-47N-0.5-10X 70 ICP-62N-0.5-10X 71 ICP-MS-09N-1 72ICP-19N-1 68 ICP-32N-5 69 ICP-47N-10X-20ML 70 ICP-62N-1 71 ICP-MS-13N-0.01X-1 72ICP-19N-10X-20ML 68 ICP-32N-5-10X 69 ICP-47N-1-10X 70 ICP-62N-10X-20ML 71 ICP-MS-13N-0.1X-1 72ICP-19N-1-10X 68 ICP-33N-0.5-10X 69 ICP-47N-25X-20ML 70 ICP-62N-1-10X 71 ICP-MS-13N-1 72ICP-19N-25X-20ML 68 ICP-33N-1 69 ICP-47N-5-10X 70 ICP-62N-25X-20ML 71 ICP-MS-14N-0.01X-1 72ICP-19N-5 68 ICP-33N-10X-20ML 69 ICP-48H-0.5-10X 70 ICP-62N-5 71 ICP-MS-14N-0.1X-1 72ICP-19N-5-10X 68 ICP-33N-1-10X 69 ICP-48H-10X-20ML 70 ICP-62N-5-10X 71 ICP-MS-14N-1 72ICP-20N-0.5-10X 69 ICP-33N-25X-20ML 69 ICP-48H-1-10X 70 ICP-63H-0.5-10X 71 ICP-MS-15N-0.01X-1 72ICP-20N-1 69 ICP-33N-5 69 ICP-48H-25X-20ML 70 ICP-63H-1 71 ICP-MS-15N-1 72ICP-20N-10X-20ML 69 ICP-33N-5-10X 69 ICP-48H-5-10X 70 ICP-63H-1-10X 71 ICP-MS-21W-0.01X-1 72ICP-20N-1-10X 69 ICP-34N-0.5-10X 69 ICP-49N-0.5-10X 70 ICP-63H-5 71 ICP-MS-21W-0.1X-1 72ICP-20N-5 69 ICP-34N-1 69 ICP-49N-10X-20ML 70 ICP-63H-5-10X 71 ICP-MS-21W-1 72ICP-20N-5-10X 69 ICP-34N-10X-20ML 69 ICP-49N-1-10X 70 ICP-63N-0.5-10X 71 ICP-MS-22H-0.01X-1 72ICP-21W-0.5-10X 69 ICP-34N-1-10X 69 ICP-49N-25X-20ML 70 ICP-63N-1 71 ICP-MS-22H-0.1X-1 72ICP-21W-1 69 ICP-34N-25X-20ML 69 ICP-49N-5-10X 70 ICP-63N-10X-20ML 71 ICP-MS-22H-1 72ICP-21W-10X-20ML 69 ICP-34N-5 69 ICP-50N-0.5-10X 70 ICP-63N-1-10X 71 ICP-MS-25N-0.01X-1 72ICP-21W-1-10X 69 ICP-34N-5-10X 69 ICP-50N-10X-20ML 70 ICP-63N-25X-20ML 71 ICP-MS-25N-0.1X-1 72ICP-21W-5-10X 69 ICP-35W-0.5-10X 69 ICP-50N-1-10X 70 ICP-63N-5 71 ICP-MS-25N-1 72ICP-22H-0.5-10X 69 ICP-35W-1 69 ICP-50N-25X-20ML 70 ICP-63N-5-10X 71 ICP-MS-27N-0.01X-1 72ICP-22H-1 69 ICP-35W-10X-20ML 69 ICP-50N-5-10X 70 ICP-64W-0.5-10X 71 ICP-MS-27N-0.1X-1 72ICP-22H-10X-20ML 69 ICP-35W-1-10X 69 ICP-51N-0.5-10X 70 ICP-64W-1 71 ICP-MS-27N-1 72ICP-22H-1-10X 69 ICP-35W-25X-20ML 69 ICP-51N-1 70 ICP-64W-10X-20ML 71 ICP-MS-29N-0.01X-1 72ICP-22H-25X-20ML 69 ICP-35W-5 69 ICP-51N-10X-20ML 70 ICP-64W-1-10X 71 ICP-MS-29N-0.1X-1 72ICP-22H-5 69 ICP-35W-5-10 69 ICP-51N-1-10X 70 ICP-65W-0.5-10X 71 ICP-MS-29N-1 72ICP-22H-5-10X 69 ICP-36N-0.5-10X 69 ICP-51N-25X-20ML 70 ICP-65W-1 71 ICP-MS-30N-0.01X-1 72ICP-23N-0.5-10X 69 ICP-36N-1 69 ICP-51N-5 70 ICP-65W-10X-20ML 71 ICP-MS-30N-0.1X-1 72ICP-23N-1 69 ICP-36N-10X-20ML 69 ICP-51N-5-10X 70 ICP-65W-1-10X 71 ICP-MS-30N-1 72ICP-23N-10X-20ML 69 ICP-36N-1-10X 69 ICP-52W-0.5-10X 70 ICP-65W-5 71 ICP-MS-32N-0.01X-1 72ICP-23N-1-10X 69 ICP-36N-25X-20ML 69 ICP-52W-1 70 ICP-65W-5-10X 71 ICP-MS-32N-0.1X-1 72ICP-23N-25X-20ML 69 ICP-36N-5 69 ICP-52W-10X-20ML 70 ICP-66N-1 71 ICP-MS-32N-1 72ICP-23N-5 69 ICP-36N-5-10X 69 ICP-52W-1-10X 70 ICP-66N-5 71 ICP-MS-33N-0.01X-1 72ICP-23N-5-10X 69 ICP-37N-0.5-10X 69 ICP-52W-5 70 ICP-67N-0.5-10X 71 ICP-MS-33N-0.1X-1 72ICP-24N-0.5-10X 69 ICP-37N-1 69 ICP-52W-5-10X 70 ICP-67N-1 71 ICP-MS-33N-1 72ICP-24N-1 69 ICP-37N-10X-20ML 69 ICP-53N-0.5-10X 70 ICP-67N-10X-20ML 71 ICP-MS-34N-0.01X-1 72ICP-24N-10X-20ML 69 ICP-37N-1-10X 69 ICP-53N-1 70 ICP-67N-1-10X 71 ICP-MS-34N-0.1X-1 72ICP-24N-1-10X 69 ICP-37N-25X-20ML 69 ICP-53N-10X-20ML 70 ICP-67N-25X-20ML 71 ICP-MS-34N-1 72ICP-24N-25X-20ML 69 ICP-37N-5 52 ICP-53N-1-10X 70 ICP-67N-5 52 ICP-MS-35W-0.01X-1 72 vINDEX


INDEXviICP-MS-35W-0.1X-1 72ICP-MS-35W-1 72ICP-MS-37N-0.01X-1 72ICP-MS-37N-0.1X-1 72ICP-MS-37N-1 72ICP-MS-41W-0.01X-1 72ICP-MS-41W-0.1X-1 72ICP-MS-41W-1 72ICP-MS-43N-0.01X-1 72ICP-MS-43N-0.1X-1 72ICP-MS-43N-1 72ICP-MS-46H-0.01X-1 72ICP-MS-46H-0.1X-1 72ICP-MS-46H-1 72ICP-MS-50N-0.01X-1 72ICP-MS-50N-0.1X-1 72ICP-MS-50N-1 72ICP-MS-51N-0.01X-1 72ICP-MS-51N-0.1X-1 72ICP-MS-51N-1 72ICP-MS-53N-0.01X-1 72ICP-MS-53N-0.1X-1 72ICP-MS-53N-1 72ICP-MS-54N-0.01X-1 72ICP-MS-54N-0.1X-1 72ICP-MS-54N-1 72ICP-MS-55N-0.01X-1 72ICP-MS-55N-0.1X-1 72ICP-MS-55N-1 72ICP-MS-56W-0.01X-1 72ICP-MS-56W-0.1X-1 72ICP-MS-56W-1 72ICP-MS-59N-0.01X-1 72ICP-MS-59N-0.1X-1 72ICP-MS-59N-1 72ICP-MS-60N-0.01X-1 72ICP-MS-60N-0.1X-1 72ICP-MS-60N-1 72ICP-MS-61N-0.01X-1 72ICP-MS-61N-0.1X-1 72ICP-MS-63N-0.01X-1 72ICP-MS-63N-0.1X-1 72ICP-MS-63N-1 72ICP-MS-64W-0.01X-1 72ICP-MS-64W-0.1X-1 72ICP-MS-64W-1 72ICP-MS-66N-0.01X-1 72ICP-MS-66N-0.1X-1 72ICP-MS-67N-0.01X-1 72ICP-MS-67N-0.1X-1 72ICP-MS-67N-1 72ICP-MS-69N-0.01X-1 72ICP-MS-69N-0.1X-1 72ICP-MS-69N-1 72ICP-MS-70N-0.01X-1 72ICP-MS-70N-0.1X-1 72ICP-MS-70N-1 72IC-PO4-10X-1 76IC-PO4-10X-5 76IC-PO4-1X-1 76IC-PO4-1X-5 76IC-PO4-2X-1 76IC-PO4-2X-5 76IC-PO4-P-10X-1 79IC-PO4-P-10X-5 79IC-PO4-P-1X-1 79IC-PO4-P-1X-5 79IC-SO4-10X-1 76IC-SO4-10X-5 76IC-SO4-1X-1 76IC-SO4-1X-5 76IC-SO4-2X-1 76IC-SO4-2X-5 76IC-SO4-S-10X-1 79IC-SO4-S-10X-5 79IC-SO4-S-1X-1 79IC-SO4-S-1X-5 79IC-SR-10X-1 78IC-SR-10X-5 78IC-SR-1X-1 78IC-SR-1X-5 78IC-SR-2X-1 78IC-SR-2X-5 78IPE-OILG-001-AS 2IPE-OILG-001-AS 96IPE-OILG-001-AT 2IPE-OILG-001-AT 96IPE-OILG-001-AV 2IPE-OILG-001-AV 96IS-7281-2OZ 59KF-0.6X-5ML-VAP 5KF-10X-20ML-PAK 5KF-10X-2ML-VAP 5KF-10X-5ML-VAP 5KF-1X-20ML-PAK 5KF-1X-2ML-VAP 5KF-1X-5ML-VAP 5KF-50X-20ML-PAK 5KF-50X-2ML-VAP 5KF-50X-5ML-VAP 5M-005A 98M-005A-10X 98M-005A-10X-PAK 98M-005A-PAK 98M-005B 98M-005B-10X 98M-005B-10X-PAK 98M-005B-PAK 98M-005V 98M-005V-10X 98M-005V-10X-PAK 98M-005V-PAK 98M-1004 98M-1004-10X 98M-1664-20ML 97M-1664-20ML-PAK 97M-1664-5ML 97M-1664-5ML-PAK 97M-418 97M-418-CON 97M-418-PAK 97M-602-GAS-10X 85, 94M-8015B/5031-11 85, 94M-8015B/5031-17 85, 94M-8440 97M-8440-CON 97M-8440-CON-PAK 97M-8440-PAK 97M-8440-SGC 97M-8440-SGC-PAK 97MA-900-4 59MA-900-8 59M-GRA-ADD/IS 44M-GRA-ADD/IS-R 45M-GRA-CAL/IS-SET 44M-GRA-CAL-R/IS-R-SET 45M-GRA-FP 47-49M-GRA-FP-PAK 47-49M-GRA-IS 44, 47, 50M-GRA-IS-5ML 44, 46-47, 50M-GRA-IS-5ML-PAK 44, 46-47,50M-GRA-IS-AS-5ML 33M-GRA-IS-AS-5ML-PAK 33M-GRA-IS-R 45, 48M-GRA-IS-R-10ML 45-46, 48,50M-GRA-IS-R-10ML-PAK 45-46,48, 50M-GRA-IS-R2 49M-GRA-IS-R2-25ML 49M-GRA-IS-R2-SET 49M-GRA-K1 43M-GRA-K2 43M-GRA-K4 43M-GRA-MSR 47M-GRA-MSR-PAK 47M-GRA-QC/IS-5ML 44M-GRA-QC/IS-5ML-PAK 44M-GRA-QC/IS-R-5ML 45M-GRA-QC/IS-R-5ML-PAK 45M-GRA-QC-10ML 44-45, 53M-GRA-QC-10ML-PAK 44-45,53M-GRA-QC-R/IS-5ML 50M-GRA-QC-R/IS-5ML-PAK 50M-GRA-QC-R/IS-R-5ML 50M-GRA-QC-R/IS-R-5ML-PAK50M-GRA-QC-R-10ML 50M-GRA-QC-R-10ML-PAK 50M-GRA-RES 47-49M-GRA-RES-PAK 47-49M-GRA-SCS-AS 33M-GRA-SCS-AS-PAK 33M-GRA-ST 44-45, 47-49M-GRA-ST-PAK 44-45, 47-49M-GRA-VT/IS-AS 33M-GRA-VT/IS-AS-PAK 33M-GRA-VT-AS-10ML 33M-GRA-VT-AS-10ML-PAK 33M-GRO-BLNK/IS-10ML 35M-GRO-BLNK/IS-10ML-PAK 35M-GRO-BLNK-10ML 35-37M-GRO-BLNK-10ML 24M-GRO-BLNK-10ML-PAK35-36M-GRO-BLNK-10ML-PAK 24M-GRO-CAL/IS-SET 34M-GRO-CAL/IS-SET-PAK 34M-GRO-CAL-EPA-SET-10ML36M-GRO-CAL-IS/EPA-SET 36M-GRO-CAL-SET 34M-GRO-EPA-CC/IS-5ML 36M-GRO-EPA-CC/IS-5MLPAK36M-GRO-EPA-CC-10ML 36M-GRO-EPA-CC-10ML-PAK 36M-GRO-EPA-SP-5ML 36M-GRO-EPA-SP-5ML-PAK 36M-GRO-IS-5ML 35-36M-GRO-IS-5ML 24M-GRO-IS-5ML-PAK 35-36M-GRO-IS-5ML-PAK 24M-GRO-QC/IS-5ML 35M-GRO-QC/IS-5ML-PAK 35M-GRO-QC-10ML 35M-GRO-QC-10ML-PAK 35M-GRO-QC-R/IS-5ML 35M-GRO-QC-R/IS-5ML-PAK 35M-GRO-QC-R-10ML 35M-GRO-QC-R-10ML-PAK 35MO-COMP-D-40X 93MOSOL-20-16 59MOSOL-75-16 59OGAD-001 2OGAD-001 85, 94, 96OGAD-001-PAK 2OGAD-001-PAK 85, 94, 96OMT-001 66OMT-001-PAK 66OMT-002 66OMT-002-PAK 66OMT-003 66OMT-003-PAK 66OMT-004 66OMT-004-PAK 66OMT-005 66OMT-005-PAK 66OMT-006 66OMT-006-PAK 66OPE-OXY-001-AS 2OPE-OXY-001-AS 96OPE-OXY-001-AT 2OPE-OXY-001-AT 96OPE-OXY-001-AV 2OPE-OXY-001-AV 96RGS-001 98S-3571 12S-603A-10X 85, 94S-603A-10X-PAK 85, 94SBPT-AROM 2, 41SBPT-BENZ 2, 41SBPT-COMP 1, 41SBPT-LSGAS 1, 31, 41SBPT-OLEFIN 2, 41SBPT-OLEFINSFC 1, 41SBPT-SDF 1, 41SBPT-SGAS 2, 41SBPT-SWMO 1, 41SCO-100X-4 11SCO-10X-4 11SCO-200X-4 11SCO-25X-4 11SCO-300X-4 11SCO-400X-4 11SCO-500X-4 11SCO-50X-4 11SCO-CAL-SET-4 11SDF-100X-4 8SDF-100X-SHOT 8SDF-10X-4 8SDF-10X-SHOT 8SDF-150X-4 8SDF-150X-SHOT 8SDF-15X-4 8SDF-15X-SHOT 8SDF-1X-4 8SDF-1X-SHOT 8SDF-200X-4 8SDF-200X-SHOT 8SDF-2X-4 8SDF-2X-SHOT 8SDF-300X-4 8SDF-300X-SHOT 8SDF-30X-4 8SDF-30X-SHOT 8SDF-3X-4 8SDF-3X-SHOT 8SDF-400X-4 8SDF-400X-SHOT 8SDF-4X-4 8SDF-4X-SHOT 8SDF-500X-4 8SDF-500X-SHOT 8SDF-50X-4 8SDF-50X-SHOT 8SDF-5X-4 8SDF-5X-SHOT 8SDF-600X-4 8SDF-600X-SHOT 8SDF-7.5X-4 8SDF-7.5X-SHOT 8SDF-70X-4 8SDF-70X-SHOT 8SDF-BL-4 8SDF-BL-SHOT 8SDF-CAL-SET-4 8SK-100X-4 9SK-100X-SHOT 9SK-10X-4 9SK-10X-SHOT 9SK-1X-4 9SK-1X-SHOT 9SK-200X-4 9SK-200X-SHOT 9SK-20X-4 9SK-20X-SHOT 9SK-30X-4 9SK-30X-SHOT 9SK-3X-4 9SK-3X-SHOT 9SK-40X-4 9SK-40X-SHOT 9SK-50X-4 9SK-50X-SHOT 9SK-5X-4 9SK-5X-SHOT 9SK-7.5X-4 9SK-7.5X-SHOT 9SK-BL-4 9SK-BL-SHOT 9SK-CAL-SET-4 9SK-HD-100X-4 9SK-HD-10X-4 9SK-HD-150X-4 9SK-HD-15X-4 9SK-HD-1X-4 9SK-HD-200X-4 9SK-HD-20X-4 9SK-HD-2X-4 9SK-HD-300X-4 9SK-HD-30X-4 9SK-HD-3X-4 9SK-HD-400X-4 9SK-HD-40X-4 9SK-HD-4X-4 9SK-HD-500X-4 9SK-HD-50X-4 9SK-HD-5X-4 9SK-HD-600X-4 9SK-HD-7.5X-4 9SK-HD-70X-4 9SK-HD-BL-4 9SK-HD-CAL-SET-4 9SRO-100X-4 11SRO-150X-4 11SRO-200X-4 11SRO-300X-4 11SRO-35X-4 11SRO-400X-4 11SRO-70X-4 11SRO-CAL-SET-4 11STP-100X-4 10STP-10X-4 10STP-1X-4 10STP-200X-4 10STP-20X-4 10STP-2X-4 10STP-300X-4 10STP-30X-4 10STP-3X-4 10STP-40X-4 10STP-5X-4 10STP-60X-4 10STP-BL-4 10STP-CAL-SET 10SWMO-100X-4 8SWMO-100X-SHOT 8SWMO-10X-4 8SWMO-10X-SHOT 8SWMO-150X-4 8SWMO-150X-SHOT 8SWMO-15X-4 8SWMO-15X-SHOT 8SWMO-1X-4 8SWMO-1X-SHOT 8SWMO-200X-4 8SWMO-200X-SHOT 8SWMO-2X-4 8SWMO-2X-SHOT 8SWMO-300X-4 8SWMO-300X-SHOT 8SWMO-30X-4 8SWMO-30X-SHOT 8SWMO-3X-4 8SWMO-3X-SHOT 8SWMO-400X-4 8SWMO-400X-SHOT 8SWMO-4X-4 8SWMO-4X-SHOT 8SWMO-500X-4 8SWMO-500X-SHOT 8SWMO-50X-4 8SWMO-50X-SHOT 8SWMO-5X-4 8SWMO-5X-SHOT 8SWMO-600X-4 8SWMO-600X-SHOT 8SWMO-7.5X-4 8SWMO-7.5X-SHOT 8SWMO-70X-4 8SWMO-70X-SHOT 8SWMO-BL-4 8SWMO-BL-SHOT 8SWMO-CAL-SET-4 8SWMO-LT-100X-4 8SWMO-LT-100X-SHOT 8SWMO-LT-10X-4 8SWMO-LT-10X-SHOT 8SWMO-LT-150X-4 8SWMO-LT-150X-SHOT 8SWMO-LT-15X-4 8SWMO-LT-15X-SHOT 8SWMO-LT-1X-4 8SWMO-LT-1X-SHOT 8SWMO-LT-200X-4 8SWMO-LT-200X-SHOT 8SWMO-LT-2X-4 8SWMO-LT-2X-SHOT 8SWMO-LT-300X-4 8SWMO-LT-300X-SHOT 8SWMO-LT-30X-4 8SWMO-LT-30X-SHOT 8SWMO-LT-3X-4 8SWMO-LT-3X-SHOT 8SWMO-LT-400X-4 8SWMO-LT-400X-SHOT 8SWMO-LT-4X-4 8SWMO-LT-4X-SHOT 8SWMO-LT-500X-4 8SWMO-LT-500X-SHOT 8SWMO-LT-50X-4 8SWMO-LT-50X-SHOT 8SWMO-LT-5X-4 8SWMO-LT-5X-SHOT 8SWMO-LT-600X-4 8SWMO-LT-600X-SHOT 8SWMO-LT-7.5X-4 8SWMO-LT-7.5X-SHOT 8SWMO-LT-70X-4 8SWMO-LT-70X-SHOT 8SWMO-LT-BL-4 8SWMO-LT-BL-SHOT 8SWMO-LT-CAL-SET-4 8T-W130 21V-028S-D-10X 90-91V-028S-D-10X-PAK 90-91WA-EPH-10X 91WA-EPH-10X-PAK 91WA-EPH-ALI 91


WA-EPH-ALI-PAK 91 WM-20CST-70 59WA-EPH-ALI-R1 91 WM-20CST-71 59WA-EPH-ALI-R1-PAK 91 WM-20-NMS-10X-1 26, 61WA-EPH-ARO 91 WM-20-NMS-1X-1 26, 61WA-EPH-ARO-PAK 91 WM-20-NMS-30X-1 26, 61WA-EPH-ARO-R1 91 WM-20-NMS-3X-1 26, 61WA-EPH-ARO-R1-PAK 91 WM-20-NMS-50X-1 26, 61WA-EPH-FCS 91 WM-20-NMS-5X-1 26, 61WA-EPH-FCS-PAK 91 WM-20-NMS-90X-1 26, 61WA-EPH-FCS-R1 91 WM-20-NMS-SET-1 26, 61WA-EPH-FCS-R1-PAK 91 WM-21-10X-4 59WA-EPH-MS2-20ML 91 WM-21-10X-8 59WA-EPH-MS2-20ML-PAK 91 WM-21-1X-4 59WA-VPH 90 WM-21-1X-8 59WA-VPH-100X 90 WM-21-30X-4 59WA-VPH-100X-PAK 90 WM-21-30X-8 59WA-VPH-10X 90 WM-21-3X-4 59WA-VPH-10X-PAK 90 WM-21-3X-8 59WA-VPH-10X-SS 90 WM-21-50X-4 59WA-VPH-10X-SS-PAK 90 WM-21-50X-8 59WA-VPH-MS 90 WM-21-5X-4 59WA-VPH-MS-PAK 90 WM-21-5X-8 59WA-VPH-PAK 90 WM-21-90X-4 59WA-VPH-RT 90 WM-21-90X-8 59WA-VPH-RT-PAK 90 WM-21-NMS-10X-1 28WC-OILG-10X-1 2, 96 WM-21-NMS-10X-1 61WFD2-R1-SET 93 WM-21-NMS-1X-1 28WFD2-SET 93 WM-21-NMS-1X-1 61WFK-SET 93 WM-21-NMS-30X-1 28WGU-SET 93 WM-21-NMS-30X-1 61WM-11-NMS-10X-1 61 WM-21-NMS-3X-1 28WM-11-NMS-1X-1 61 WM-21-NMS-3X-1 61WM-11-NMS-30X-1 61 WM-21-NMS-50X-1 28WM-11-NMS-3X-1 61 WM-21-NMS-50X-1 61WM-11-NMS-50X-1 61 WM-21-NMS-5X-1 28WM-11-NMS-5X-1 61 WM-21-NMS-5X-1 61WM-11-NMS-90X-1 61 WM-21-NMS-SET-1 28WM-11-NMS-SET-1 61 WM-21-NMS-SET-1 61WM-12-10X-4 59 WM-21-SET-4 59WM-12-10X-8 59 WM-21-SET-8 59WM-12-1X-4 59 WM-75CST-01-5X 59WM-12-1X-8 59 WM-75CST-02-5X 59WM-12-30X-4 59 WM-75CST-04-5X 59WM-12-30X-8 59 WM-75CST-06-5X 59WM-12-3X-4 59 WM-75CST-07-5X 59WM-12-3X-8 59 WM-75CST-08-5X 59WM-12-50X-4 59 WM-75CST-09-5X 59WM-12-50X-8 59 WM-75CST-13-5X 59WM-12-5X-4 59 WM-75CST-15-5X 59WM-12-5X-8 59 WM-75CST-27-5X 59WM-12-90X-4 59 WM-75CST-29-5X 59WM-12-90X-8 59 WM-75CST-30-5X 59WM-12-NMS-10X-1 61 WM-75CST-32-5X 59WM-12-NMS-1X-1 61 WM-75CST-33-5X 59WM-12-NMS-30X-1 61 WM-75CST-35-5X 59WM-12-NMS-3X-1 61 WM-75CST-37-5X 59WM-12-NMS-50X-1 61 WM-NMS-14 26, 28WM-12-NMS-5X-1 61 WM-NMS-14-5X 26, 28WM-12-NMS-SET-1 61 Z-008 21WM-12-SET-4 59 Z-008S 54WM-12-SET-8 59 Z-008S-H-10X 54WM-20CST-01 59 Z-008S-M 54WM-20CST-02 59WM-20CST-03 59WM-20CST-04 59WM-20CST-06 59WM-20CST-07 59WM-20CST-08 59WM-20CST-09 59WM-20CST-13 59WM-20CST-15 59WM-20CST-27 59WM-20CST-29 59WM-20CST-30 59WM-20CST-32 59WM-20CST-33 59WM-20CST-34 59WM-20CST-35 59WM-20CST-37 59WM-20CST-41 59WM-20CST-43 59WM-20CST-50 59WM-20CST-52 59WM-20CST-53 59WM-20CST-54 59WM-20CST-55 59WM-20CST-60 59WM-20CST-63 59WM-20CST-64 59WM-20CST-67 59 viiINDEX


5 Ways to Search“e-Standards®” is the Fastest, Most Comprehensive Search Enginewith over 30,000 products.Search by:• Catalog Number• Single or Multiple Components,• Method (EPA, ASTM, etc.)• Chemical Category (Organic, Inorganic, Petroleum, etc.)• Other Companies’ Part NumberLog on to www.accustandard.com. and see how easy, it is.Easy Ordering 24/7On-Line OrderingThere is an easier way to get Chemical Reference Standardse-Standards ® from AccuStandard.comFind It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply on online orders, seedetails on website.On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need we can prepare Custom Formulationand Custom Packaging for both Organic and Inorganic needs. Seeour Website for more info.Over 30,000 Standards,just a click awayAccuStandard, Your Standards and Technical Information Source!Total PetroleumHydrocarbon PatternRecognition StandardsBOOK-TPH $ 35Analytical Standards andReference Material for all209 PCB CongenersS-3571 $ 25


Custom Quotation Request FormFrom: Company Contact _______________________________________Company Name _______________________________________Phone: ( ) _______________________ Ext. __________Send to:AccuStandard, Inc.125 Market StreetNew Haven, CT 06513USAFAX: 203-786-5287FAX: ( ) _______________________Email:______________________________________For Internal Use OnlyAS Tech. Rep. __________ Product Ordering # ____________Quote Creation Date __________ Quoted price $ ____________Page ___ of ___YOU CAN ALSO USE OUR WEB SITE TOREQUEST CUSTOM QUOTATIONS ATwww.accustandard.comRequested QuantityNo. of Comps. ____Product Description ________________________________________Concentration ______________________Solvent / Matrix ______________________Organic5 x 1 mL10 x 1 mL20 x 1 mLother ___ x ___Inorganic___ 1 x 500 mL___ x 500 mLComponent (s) CAS No. Concentration(optional)(if varied)1 __________________________________________________________2 __________________________________________________________3 __________________________________________________________4 __________________________________________________________5 __________________________________________________________6 __________________________________________________________7 __________________________________________________________8 __________________________________________________________9 __________________________________________________________10 __________________________________________________________11 __________________________________________________________12 __________________________________________________________13 __________________________________________________________14 __________________________________________________________15 __________________________________________________________16 __________________________________________________________17 __________________________________________________________18 __________________________________________________________19 __________________________________________________________20 __________________________________________________________Concentration Unitsng/mLµg/mLmg/mLwt. %vol. %Photocopythis form forfuture useQuotation Notes_______________________________________________________________________________________________________________________________________Requested Delivery Date __________QR-PDN-001Rev. AUG 11 2003


Notice the Difference with AccuStandardExperience in Petrochemical Requirements•Years of Round Robin Studies with ASTM•Ampulled over 300 gallons of ASTM fuel sets includingover 35 gasoline and hydrocarbon blends• Standards for over 100 ASTM Methods• 17 years of Manufacturing, Organic & Inorganic Standards• Synthesizes rare Hydrocarbons not otherwise availableInvolvement in the Petrochemical Industry• Participation in regular ASTM meetings• Active in D-02 and D-16 subcommittees• Provides support to several Petrochemical Instrument ManufacturersResources• Low Sulfur Analyzers (such as XOS) for Measurements to ppb Levels• Instrumention for Analyzing Standards for ICP, ICP-MS, AA, GC/MS,GC/FID, GC/EC, GC/NPD, Karl Fischer Titrator, and others• NIST/NVLAP Accredited (Lab Code 200389-0) as a PT Provider• ISO 9001:2000 Certified (ISO 9001 for the last 10 years)• Extensive Inventory of ASTM and Related StandardsNew Products in this Catalog• Low Sulfur and Nitrogen Standards (see pages 6-11)• LUFT/LUST Standards (see pages 81-98)• TPH Standards (see pages 81, 92-93, 96-97)• No Haz Fee ICP & AA Standards (see pages 67-75)• Additional New ASTM StandardsPRINTED ONRECYCLED PAPER© AccuStandard, Inc. 2003


AccuStandard, Inc.125 Market St.New Haven, CT 06513Address Service RequestedPRESORTED STANDARDUS POSTAGEPAIDBRIDGEPORT, CTPERMIT NO. 38In this Catalog100 plus ASTM Methods: Low Level Sulfur,Wear Metals, PIONA, DHA, Oxygenates, Aromatics,Physical Properties, LUFT/LUST (New Section)AccuStandard, Inc.125 Market StreetNew Haven, CT 06513USAISO 9001:2000Certificate Number: 31692MEMBERTEL: 203-786-5290Toll Free 800-442-5290FAX: 203-786-5287FAX Toll Free 877-786-5287Email:Website:usa@accustandard.comwww.accustandard.com

More magazines by this user
Similar magazines