RoadRunner Owner's Manual - Data I/O Corporation

Installation • Mounting the RoadRunner ••Ball ScrewRail Hous-YellowShippingBracketTop ViewSideBall ScrewHeadCover(some2PNP HeadFigure 2-2—Shipping Bracket (Plan and Elevation Views)To remove the Shipping Bracket:1. Remove the Robotics Cover by grasping the outer edges and pulling.2. If your PNP head has a cover, remove the cover by pulling it straight offthe magnetized head bracket.3. Unscrew the socket head screw securing the Shipping Bracket to thePNP Head.4. Unscrew the two screws securing the Shipping Bracket to the BallScrew housing.5. Remove the Shipping Bracket.Mounting the RoadRunnerThe RoadRunner is designed to mount to the SMT machine feeder table.Multiple RoadRunners may be mounted on the same SMT machine.CAUTION: Heavy weight. Use great care when mountingRoadRunner to the feeder table. It is heavy, and droppingit can cause serious damage to RoadRunner andanything it falls upon. Use only approved hardware tomount RoadRunner to the SMT feeder table.Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010] 2—3