Anritsu MS2661C: Microwave Spectrum Analyzer - elsinco

●Automated measurement withoutexternal controllerThe built-in microcomputer (PTA) functions which utilize thespectrum analyzer as a controller, make an external controllerunnecessary. An automated measurement system includingcontrol of other instruments is easily configured. The twomethods for loading programs are shown below.Programs written on a computer are saved to amemory card. The memory card is inserted intoa memory card slot in the spectrum analyzerand the programs are loaded.Personal computerMemory cardRS-232C or GPIBMS2661CPrograms written on a computer are transferredto the spectrum analyzer via the RS-232C orGPIB interface.Personal computer●Application softwareThe following items can be measured automatically usinga combination of application software, peripheral equipmentand options.MX260002A CDMA Cellular System MeasurementSoftwareChannel power, occupied frequency bandwidth, adjacentchannel power, time response for open-loop power control,spuriousMX260003A PDC Measurement Software (for base station)Channel power, frequency, occupied frequency bandwidth,adjacent channel power, spuriousMX260004A GSM Measurement SoftwarePower, time response, adjacent channel power, spurious,intermodulation characteristicsMX261001A Low-Power Data Communication SystemMeasurement Software conforming to issue of DirectSpread Spectrum SystemMX261002A Low-Power Data Communication SystemMeasurement Software conforming to issue ofFrequency Hopping SystemFrequency, power, occupied frequency bandwidth, adjacentchannel power, spuriousMX262001A CATV Measurement SoftwareVideo power, C/N, frequency, cross modulation, CTB, modulationfactor, humMX264001A EMI Measurement SoftwareRadiated emission, conducted emission15