Micro Motion® Insertion Density and Viscosity Meter Accessories

Ordering information – flow-through chambersModelProduct description782791 Flow-through chamber for 7826/7828 and 7827/7829 vibrating fork metersCode Inlet / Outlet Pipe size Flow Range Calibration BoundaryAvailable with all flow-through chamber connection to 782x optionsA 1-inch (25 mm) sch 80 5 - 40 l/min 2-inch Schd 40D 2-inch (50 mm) sch 80 5 - 40 l/min 2-inch Schd 40Available with flow-through chamber connection to 782x option N onlyB 1-inch (25 mm) sch 80 5 - 300 l/min 3-inch Schd 80E 2-inch (50 mm) sch 80 5 - 300 l/min 3-inch Schd 80G 3-inch (80 mm) sch 80 5 - 300 l/min 3-inch Schd 80Z ETO ETO refer to factoryCodeAZCodeBCCodeAB (1)C (1)G (1)H (1)NCodeABCGHJLNRTKMQSUPZMaterials316L Stainless SteelETOCertificationAvailable with all flow-through chamber connection to 782x optionsNoneAvailable with flow-through chamber connection to 782x option A & N onlyPED approvedFlow-through chamber connection to 782xAvailable with Inlet / Outlet Pipe Sizes A & D only2-inch ANSI 150RF Flanges2-inch ANSI 300RF Flanges - no certification2-inch ANSI 600RF Flanges - no certificationEN1092 RF DN50/PN40 - no certificationEN1092 RF DN50/PN100 - no certificationAvailable with all Inlet / Outlet Pipe Sizes1.5-inch Cone Seat Compression FittingProcess ConnectionsAvailable with all Inlet / Outlet Pipe Sizes A & B only1-inch ANSI 150RF Flanges1-inch ANSI 300RF Flanges1-inch ANSI 600RF FlangesEN1092 RF DN 25/PN40EN1092 RF DN 25/PN100Available with all Inlet / Outlet Pipe Sizes D & E only2-inch ANSI 150RF Flanges2-inch ANSI 300RF Flanges2-inch ANSI 600RF FlangesEN1092 RF DN 50/PN40EN1092 RF DN 50/PN100Available with all Inlet / Outlet Pipe Sizes G only3-inch ANSI 150RF Flanges3-inch ANSI 150RF Flanges3-inch ANSI 150RF FlangesEN1092 RF DN 80/PN40EN1092 RF DN 80/PN100Available with all Inlet / Outlet Pipe SizesWeld prepared endsETO Flange(1) Only available if Certification letter is ‘B’Micro Motion Insertion Density and Viscosity Meter Accessories 7