20P1-10 - ChemCenters

AkzoNobelAerospace Coatings20P1-10Integral Fuel Tank CoatingProduct GroupFuel tank coatingCharacteristicsProductInformationComponentsCuring Solution,Thinner/Reducer- This chemically cured lead-free and EE acetate-free polyurethane coatingis intended for the protection of aircraft integral fuel tanks against corrosionfrom fuel contaminants. It is suitable for use in a service temperature rangefrom -65° to 250°F (-54° to 121°C). Class B material is specially formulatedfor use in areas having air pollution regulations controlling the emissions ofcertain types of solvents into the atmosphere. However, it may be used innon-controlled areas as well.Curing Solution PC-108Thinner TR-53SpecificationsQualified ProductListBombardier/CanadairMilitary USSAE AMSBAMS 565-010AMS-C-27725, Ty IIAMS-C-27725, Ty IIThe complete AkzoNobel Aerospace Coatings qualified product list (QPL) canbe found at: www.akzonobel.com/aerospaceSurface ConditionsCleaning - Surface pretreatment is an essential part of the painting process.- Follow the specification requirements for cleaning and pretreatmentapplication.Instruction for UseMixing Ratio(volume)4 parts1 part4 partsBase 20P1-10Curing Solution PC-108Thinner TR-53- Stir or Shake until all pigment is uniformly dispersed before adding curingsolution.- Stir the catalyzed mixture thoroughly-Page 1 of 4AkzoNobel Aerospace Coatings1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056Internet: www.akzonobel.com/aerospace

AkzoNobelAerospace Coatings20P1-10Integral Fuel Tank CoatingInduction Time30 minutes.Initial SprayingViscosity(25ºC/77ºF)NotePot Life(25ºC/77ºF)10-20 seconds #4 Ford22-42 seconds ISO Cup 429-35 seconds Zahn Cup #1Viscosity measurements are provided as guidelines only and are not to beused as quality control parameters. Certified information is provided bycertification documentation available on request.8 hours.Dry FilmThickness(DFT)20 30 micron (μm)0.8 1.2 milsApplicationRecommendationsConditionsTemperature:Relative Humidity:15 – 35°C59 – 95°F35 – 75%NoteThe quality of the application of all coatings will be influenced by the sprayequipment chosen and the temperature, humidity, and air flow of the paintapplication area. When applying the product for the first time, it isrecommended that test panels be prepared in order to identify the bestequipment settings to be used in optimizing the performance and appearanceof the coating.EquipmentConventional AirHVLP1.4 mm (.055 inch) nozzle orifice1.4 mm (.055 inch) nozzle orificeNumber of coatsSpray apply a single uniform wet coat to recommended dry film thicknessPage 2 of 4AkzoNobel Aerospace Coatings1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056Internet: www.akzonobel.com/aerospace

AkzoNobelAerospace Coatings20P1-10Integral Fuel Tank CoatingCleaning ofEquipmentUse TR-53 to minimize the possibility of residue remaining on the equipment.Physical PropertiesDrying Timesaccording toAITM 2-0011(25 +/- 2ºC / 77+/- 2ºF, 55 +/- 5%RH)Dry to dustTack freeDry HardFull cureAccelerated Cure @ 10-20%R.H.Dry HardFull Cure30 minutes2 hours24 hours14 days2 hour flash off, then 3 – 4 hours @140°F (60°C)2 hour flash off, then 24 – 36 hours @140°F (60°C)TheoreticalCoverage8.21 m 2 per liter ready to apply at 25 μm dry film thickness320 ft 2 per US gallon ready to apply at 1 mil dry film thicknessDry Film Weight44.7 g/m 2 / 25 microns0.009 lbs/ft 2 / 1 milVolatile OrganicCompoundsMax 685 g/lMax 5.7 lb/gal per US calculationsGloss (60º)10 GUColorTranslucent yellowFlash-point 20P1-10PC-108TR-53-5ºC / 23ºF7ºC / 45ºF7ºC / 45ºFPage 3 of 4AkzoNobel Aerospace Coatings1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056Internet: www.akzonobel.com/aerospace

AkzoNobelAerospace Coatings20P1-10Integral Fuel Tank CoatingStorageShelf life5 - 38°C(40 - 100°F)Store the product dry and at a temperature between 5 and 38ºC / 40 and100ºF per AkzoNobel Aerospace Coatings specification. Store in the originalunopened containers. Storage temperature may vary per OEM specificationrequirements. Refer to container label for specific storage life information.24 months per AkzoNobel Aerospace Coatings commercial specification.Shelf life may vary due to OEM specification requirements. Refer to containerlabel for specific shelf life information.Safety PrecautionsComply with all local safety, disposal and transportation regulations. Check theMaterial Safety Data Sheet (MSDS) and label of the individual productscarefully before using the products. The MSDSs are available on request.Issue date: September 2009 (supersedes April 2009) - FOR PROFESSIONAL USE ONLYIMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using theproduct for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product forthe intended purpose does so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. Alwaysread the Material Data Sheet and the Technical Data Sheet for this product if available. All advice we give or any statement made about the product by us (whether in this data sheetor otherwise) is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application ofthe product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arisingout of the use of the product. All products supplied and technical advice given is subject to our standard terms and conditions of sale. You should request a copy of this document andreview it carefully. The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development. It is theuser's responsibility to verify that this data sheet is current prior to using the product.Brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel.Page 4 of 4AkzoNobel Aerospace Coatings1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056Internet: www.akzonobel.com/aerospace