section

INTRODUCTION NOTE ON GATE VALVESProduction rangeAn exclusive range of gate valves unique from DN 20 to DN 1800, pressure class 1 to 100 bar,grouped in 3 types of materials:- Construction in ductile iron EN GJS-400-15 (EN GJS-500-7)- Construction in carbon steel GP 240- Construction in Cast iron EN GJL-250Conformity to normsAll our gate valves are produced in compliance with the norms EN 1074-1, EN1074-2, EN 1171,face to face in compliance to EN 558, the flanges in compliance with EN 1092-1, EN 1092-2.The tests are effected on the test bench before leaving the factory in compliance with EN 12266.Compatibility with potable waterThe complete range of our gate valves (gaskets and paintings) complies with the European normsfor potable water use (GSK - D.M. 174 Department of Health).AccessoriesThey are furthermore complete of all accessories necessary for their installation have and completerange of electric - hydraulic - pneumatic actuators.The complete range of gate valves have obtained the European product certificate.Technical Sheet Rev.00 it-en 03/2007 sezione 1 saracinesche section 1 gate valvesAC.MO S.p.A si riserva il diritto di apportare modifiche anche senza preavviso, al fine di un miglior standard qualitativo. E’ proibito l’uso non autorizzato delle specifiche tecniche.AC.MO S.p.A. reserves the right to modify the specifications and data contained in this catalogue, even without prior notice, in order to improve its quality standards. Non authorized use is forbidden.