System 45 panels technical

kada.co.nz
  • No tags were found...

Download - Kada* Commercial Furniture

System 45 panelstechnical


System 45 panelsSystem 45 panels are simple tounderstand, plan and install.Complete rigidity is achieved with aneconomy of parts and materials.A breakthrough design that combineselegant simplicity, with strength andquality engineering.


IndexIndexpanels 02-03junctions and connectors 04-07post/junction 08worksurfaces 09cable reticulation 10-11accessories 12specification of system 45 panel system 13system 45_01


Panelsbase panels I suspended panels I stacker panelsKey FeaturesHigh flexibility with fast assembly, reconfiguration and relocationrequiring a single allen key.Panels are 45 mm thick with (load bearing) top transom rail and off-modulepanel capability.Minimal componentry required for panel junctions available in 90º, 120ºand linear.Base panels can accept stackable (add-on) panels to increase screen height.Optional cable reticulation and outlet modules.Choice of standard panel construction, optional pinable or acoustic soundabsorbing panel cores.Seamless compatibility with comprehensive ranges of desking, storage,tables and accessory options.Extensive selection of panel types, colours and finishes.All components are reuseable.BASE PANELScodea b c dS45.S1code S45.S2 code S45.G1-1-CGS45.G1-1-FGS45.G1-2-FGe f g hcodeS45.SG-1-CGS45.SG-1-FGS45.SG-2-FGcode S45.S1-FWT removable feature divider code S45.S1-W code S45.S2-WBASE PANELSpanel widths (mm)90010501200450•••600•••750•••800•••900•••1200•••1500•••1800•••2100•••2400•••1350 • • • • • •1500 • • • • • •1800 • • • • • •2100 • • • • • •2400 • • • • • •*Special sizes available on request.panel heights (mm)a_Solid panel.b_Two piece solid panel with mid transom.c_Centre full glazed panel.Offset full flush glazed panel.Double full flush glazed panel.d_Two piece centre partial glazed panel with mid transom.Two piece offset partial flush glazed panel with mid transom.Two piece double partial flush glazed panel with mid transom.e_Solid panel with function wall top transom.f _Example of a removable feature divider available in glass, acrylic,eco panel, powder coated MDF and veneer.g_Solid panel with wave top.h_Two piece solid panel with mid transom and wave top.SUSPENDED PANELScodea b c dS45-SU.S1code S45-SU.S2 code S45-SU.G1-1-CGS45-SU.G1-1-FGS45-SU.G1-2-FGe f g hcodeS45-SU.SG-1-CGS45-SU.SG-1-FGS45-SU.SG-2-FGcode S45-SU.S1-FWT removable feature divider code S45-SU.S1-W code S45-SU.S2-Wpanel heights (mm)a_Solid panel.b_Two piece solid panel with mid transom.c_Centre full glazed panel.Offset full flush glazed panel.Double full flush glazed panel.d_Two piece centre partial glazed panel with mid transom.Two piece offset partial flush glazed panel with mid transom.Two piece double partial flush glazed panel with mid transom.e_Solid panel with function wall top transom.f _Example of a removable feature divider available in glass, acrylic,eco panel, powder coated MDF and veneer.g_Solid panel with wave top.h_Two piece solid panel with mid transom and wave top.SUSPENDED PANELSpanel widths (mm)450 600 750 800 900 1200 1500 180090010501200••••••••••••••••••••••••13501500••••••••••••* Special sizes available on request.* Panel height dimensions show the actual heights of the panels.They do not include suspension distance from floor.STACKER PANELSabSTACKER PANELSpanel widths (mm)a_ stack add-on panel.b_ base panel.code S45-ST.S1Solid panel.codeS45-ST.G1-1-CGS45-ST.G1-1-FGS45-ST.G1-2-FGCentre full glazed panel.Offset full flush glazed panel.Double full flush glazed panel.code S45-ST.S1-WSolid panel with wave top.heights (mm)450 600 750 800 900 1200 1500 1800150300••••••••••••••••450 • • • • • • • •* Special sizes available on request.


Panelsvoid panels I glazing options I wall starter bracket I finishesVOID PANELSGLAZING OPTIONSCentre glazingFlush glazing - single sidedFlush glazing - double sidedheight 300/400Void panels connect to system 45base panels to create a 300 mm or400 mm void between the undersideof the panel and the floor.FINISHEScentre glazing CG flush glazing 1-FG or 2-FGGlass is offered in both clearand translucent.Other finishes available on request.Glass is offered in both clearand translucent.Can be single or double sided.codeWS1B-45Wall starter bracket.Attaches system 45 panel to wall2 - brackets required.fabricperforated metalCR perforationperforated metalMW perforationpinable fabric screenpowdercoated MDF laminate veneer echo panelPanel faces can be specified in a variety of finishes as illustrated.Panel trims are finished in hard wearing powdercoat with colour as selected.Materials and colours are subject to availability.system 45_03


Junction Connectorsstraight junction I 90º two way open junction I 90º two way closed junction I 90º three way open junctionI common height panelsEach common height junction has an individual Product Code No. as shown.Connectors are specified as one set for each junction.By specifying the Code No’s and quantities of the junctions required,the appropriate quantity and type of connectors will be supplied.STRAIGHT JUNCTIONCOMMON HEIGHT PANELSset code S45.J180.1W.S (base panel set)Junction connector set comprises2-type B-671 011 connectors.set code S45-SU.J180.1W.S (suspended & void panel set)Junction connector set comprises4-type B-671 011 connectors.90º TWO WAY OPEN JUNCTION COMMON HEIGHT PANELSset codeS45.J90.2W.OJunction connector set comprises2-type B-671 005 connectors.90º TWO WAY CLOSED JUNCTION COMMON HEIGHT PANELSset codeS45.J90.2W.CJunction connector set comprises2-type B-671 002 connectors.90º THREE WAY OPEN JUNCTION COMMON HEIGHT PANELSset codeS45.J90.3W.OJunction connector set comprises4-type B-671 005 connectors.


Junction Connectors90º three way closed junction I 90º off module junction I 90º four way junction I 90º four way umbilical junctionI common height panels90º THREE WAY CLOSED JUNCTION COMMON HEIGHT PANELSab90º OFF MODULE JUNCTION COMMON HEIGHT PANELSset code S45.J90.3W.CJunction connector set comprisesa_4-type B-671 003 connectors andb_2-type B671 011 conector.90º FOUR WAY JUNCTION COMMON HEIGHT PANELSset code S45.J90.3W.OMJunction connector set comprises2-type B-671 002 connectors.set code S45.J90.4W.CJunction connector set comprises8-type B-671 005 connectors.90º FOUR WAY JUNCTIONPanels set for umbilical entry(35 mm wide access opening)COMMON HEIGHT PANELS35mmworktop width25mmoverall panel widthequals nominatedworktop widthminus 25 mmset code S45.J90.4W.U (4 way junction)Junction connector set comprises8-type B-671 007 connectors.set code S45.J90.3W.U (3 way junction)Set comprises4-type B-671 007 connectors.system 45_05


Junction Connectors120º three way junction I 120º tech column three way junction I common height panelsEach common height junction has an individual Product Code No. as shown.Connectors are specified as one set for each junction.By specifying the Code No’s and quantities of the junctions required,the appropriate quantity and type of connectors will be supplied.120º THREE WAY CLOSED JUNCTION COMMON HEIGHT PANELSset codeS45.J120.3W.CJunction connector set comprises6-type B-671 004 connectors.120º THREE WAY JUNCTIONPanels set for services access.(44 mm wide access opening)COMMON HEIGHT PANELSworktop width44mm25mmoverall panel widthequals nominatedworktop widthminus 25 mmset code S45.J120.3W.OJunction connector set comprises6-type B-671 009 connectors.120º THREE WAY JUNCTIONPanels set for umbilical entry.(84 mm wide access opening)COMMON HEIGHT PANELSworktop width84mm48mmoverall panel widthequals nominatedworktop widthminus 48 mmset code S45.J120.3W.UJunction connector set comprises6-type B-671 006 connectors.120º TECH COLUMN THREE WAY JUNCTIONPanels connect to tech column.COMMON HEIGHT PANELSmodule size70mmoverall panel widthequals nominatedworktop widthminus 70 mmset code S45.J120.3W.TCJunction connector set comprises6-type TECHBKT-01A connectors.


Junction Connectors180º straight junction I 90º two way open junction I 90º two way closed junction I 90º of module junctionI transition height junctionsJunction connectors for transition height junctions are specified per each not‘per set’. Each of the examples shown below indicate the connector product codesand the quantity required of each to achieve the junction.180º STRAIGHT JUNCTION TRANSITION HEIGHT PANELScode WS1B-45connectors required1-wall starter bracket.90º TWO WAY OPEN JUNCTION TRANSITION HEIGHT PANELSaababbconnectors requireda_1- type B-671 013 connector.b_1- type B-671 005 connector.90º TWO WAY CLOSED JUNCTION TRANSITION HEIGHT PANELSaababbconnectors requireda_1- type B-671 001 connector.b_1- type B-671 002 connector.90º OFF MODULE JUNCTION TRANSITION HEIGHT PANELSStacker panelconnectors required2- type B-671 002 connectors.system 45_07


Post/Junctionsystem 45 post and panelSystem 45 corner postCorner junction post for System 45 suspended panels.Forms two way, three way and four way junctions witheither common height or transition height panels.JUNCTION POSTend support post 180º linear junction two way 90º junction three way 90º junction four way 90º junctionAll system 45 panel types can be suspended betweenthe posts. There is also an optional enclosed cable ductwith soft wired services outlets, clip-on shelves andaccessory items.180º linear connection four way 90º junction with cable ductcodeTECHBKT.01APost to panel connecting bracket.SYSTEM 45 STABILISING POSTAn efficent and flexible way to provide desks,services and accessories to transitory work areas.Stabilising posts combine with system 45 panels tocreate light, open and portable freestanding panel runs.Maximum width(single panel) 2400 mmMaximum height1200 mmService outletsDouble sidedcable duct


RLRWorksurfacestypical workstation clusters for system 45 I worksurface support brackets I worksurface support legsWorksurfacesWorksurfaces can be specified either 25 mm or 33 mm thick.Available finishes include selected laminates, timber veneers and powdercoatedMDF in a range of colours.There is a wide selection of shapes and sizes to ensure the right solution fortask specific requirements. Edge finishes and shapes also offer many choiceswith custom shapes available on request.TYPICAL WORKSTATION CLUSTERS FOR SYSTEM 45Cluster examples using various shaped worksurfaces.WORKSURFACE SUPPORT BRACKETSaRLabRLba_codeb_codeS45.D400LH-CS45.D600LH-CCurved desk support brackets.Left hand.a_codeb_codeS45.D400RH-CS45.D600RH-CCurved desk support brackets.Right hand.a_codeb_codeS45.D400D-CS45.D600D-Clength a_358 mm/b_495 mm length a_358 mm/b_495 mm length a_358 mm/b_495 mmCurved double desk support brackets.codeS45.FTS-LHFront top support bracket.Left hand.codeS45.FTS-RHFront top support bracket.Right hand.codeS45.D400LH-45-CcodeS45.D400RH-45-Clength 350 mm length 350 mmPanel locking guide. (Unhanded)Curved corner desk support brackets Curved corner desk support brackets(Holds panels against adjustableLeft hand.Right hand.height worksurface).codeS45/PNL-LCK-GUIDEcode DJ-50size 50 mm x 50 mmUnderdesk joining plates.code DJ-300/400/500/600depth 150 mmwide 300/400/500/600 mmUnderdesk joining plate.WORKSURFACE SUPPORT LEGSFixed height.WORKSURFACE SUPPORT LEGSHeight adjustable.600 mm800 mmheightdia.codeLeg 695 mm plusworksurface.28 mm dia. QEDQLIF-NB-STRTheightdia.codeLeg 695 mm plusworksurface.28 mm dia. QEDQLIF-NB-10ºheightdia.codeLeg 687 mm plusworksurface.70 mm dia. legU10 legheightcodeHeight adjustable leg610 mm to 735 mmplus worksurface.QED3-STRTheightcodeHeight adjustable leg610 mm to 735 mmplus worksurface.QED3-10ºheightcodeHeight adjustable leg625 mm to 705 mmplus worksurfaces.Marina legsystem 45_09


Cable Reticulationcable routing I power blades I umbilical I 120º tech column I cylinder power poleCable routingSystem 45 offers a number of cable routing options. They can be combined tosatisfy specific requirements while always providing easy access and efficientcable management throughout entire layouts.Cables can be routed to panels from ceilings, walls or floors by utilisingumbilicals, power blades or tech columns.POWER BLADESCable entry from ceiling or floor.Exit points to suit requirements.Power/Dataservice railPower/Dataservice railFloor to ceilingCable trayUMBILICALSPanels set for umbilical entry.(35 mm wide access opening)Power/Dataservice boxHeight asrequiredCable tray120º TECH COLUMNDirect cable access from floor.Ceiling access through top of tech columnvia umbilical or 80 mm dia. cylinder power pole.UmbilicalCylinderpower pole1050/1200/1350 mm


Cable Reticulationinterpower soft wiring system I cable trays and basketsInterpower softwiring systemSchiavello interpower electrical softwiring system delivers power andlighting to office workstations.The system is easily connected, disconnected or relocated without the need toisolate power and with minimal inconvenience.All connections within the interpower system are protected by a positive lockmechanism to prevent accidental power disconnection.All components are factory tested and easy to install. All interpower softwiringcomponents are reuseable.STANDARD SERVICE RAILPOWER MODULESDATA MODULEScodecodecodeSR/2P/4DSR/3P/4DSR/4P/4DcodecodecodePM2HPM2H1VLPM4VLcodecodecodeNGDM/2NGDM/4NGDM/6Mounts to rear of desktop.INTERPOWER SOFTWIRING SYSTEMRefer to Schiavello Interpower brochure SCH/W05-C forcomplete product information and technical specifications.codeSSStarter sockets.codeJunction box.JB-ScodeExtension leads.EX-SOO (add lengthi.e.600m lead =EX-S00600)codeIDBO.1Power/Data service boxInserts into desktops.codeS45CAPCable access port.Optional panel fitting where requiredto provide cable access throughclosed junctions.Cable trays and bracketsOptional cable trays and brackets attach to either system 45panels or underside of worksurfaces.These simple lay-in and very flexible designs ensure cables can be neatlyaccommodated without intruding on to the worksurface or floor.CABLE TRAYS AND BRACKETScode EL/SERDCT-SQheight 50 mmdepth 100 mmwidth to orderElitone metal cable tray.codeS45/SERDCT/LCable traysupport bracket LH.Attaches to vertical mullionof system 45 panels.codeS45/SERDCT/RCable traysupport bracket RH.Attaches to vertical mullionof system 45 panels.codeheightdepthlength2CWB80 mm (inc.brackets)160 mm660/860/1060 mmCable baskets.Supplied with 2 brackets attachesto underside of worksurfaces.codeheightdepthlengthSTTWB230 mm95 mm900/1200 mmCable baskets.Supplied with 2 brackets attachesto underside of worksurfaces.codeheightdepthlengthQWCM-ASSY65 mm120 mmto orderQED cable tray.Attaches to undersideof worksurfaces.system 45_11


Accessoriesfunction walls I accessoriesFunction wallsMount to transom rails of system 45 panels via integralmounting detail. Additional brackets not required.FUNCTION WALLSheighttype150 mmheight 300 mmheight 450 mmFWT-150 type FWT-300 type FWT-450ACCESSORIES - FOR TRANSOM RAIL AND FUNCTION WALL MOUNTabcabababside_a 300 mmside_b 600|750|900|1050|1200side_c 250|300|350|410 mmtype ULT-SHLF-25Ultimet shelf.side_a 300 mmside_b 600|750|900|1050|1200type ULT/SHLF-LINE-0600-DIVSlimline shelf.side_a 200 mmside_a225 mmside_b 150/260|390|520 side_b 600/750/900/1050/1200type ULT CD SHELF type ULT/SL/SHELF-600CD holder 2-3-4.Slimline mini shelf.c c c cb b baaabaside_a 50 mmside_b 158 mmside_c 26 mmtype ULT-PTRAY/SMUltimet pencil tray - small.side_a 122 mmside_b 319 mmside_c 26 mmtype ULT-PTRAY/LGUltimet pencil tray - large.side_a 245 mmside_b 319 mmside_c 26 mmtype ULT-STRAYStationery tray (portrait).side_a 313 mmside_b 251 mmside_c 26 mmtype ULT-STRAY-A4Ultimet paper tray - A4 landscape.ccabcbababadside_a 115 mmside_b 265 mmside_c 272 mmtype ULT-PHBOOKUltimet phone book holder.side_a 245 mmside_b 325 mmside_c 39 mmtype ULT-PHTRAYUltimet phone tray.side_aside_bside_c67 mm40 mm125 mmside_d 25 mmtypeVase.ULT/VASEside_aside_btype40 mm40 (overall height)TH/CHTransom hung coat hook.Natural anodised finish.side_a 49 mmside_b 170 mmtype TH/NAMEPLATE 170Tansom hung name plate.


Specification of System 45 Panel Systemgeneral I panels I connectors I cable reticulation I aluminium finish I warrantyGeneralThe workstation panel system shall be System 45 as manufactured by SchiavelloAustralia or similar approved. The system shall be stackable and easily demounted,relocated, extended or reduced in size and all components shall be reusable.PanelsThe panels must have a thickness of 45 mm with single panel widths of up to2400 mm. They should have a load bearing top transom rail and be designed to beeither floor mounted or suspended from desks as required and as specified later.The panels must be rigid, with the strength to support hampers, shelvesand worktops.They must also have provision to accept accessories from both a horizontal andvertical position.The panels must provide both integrated and transom mounted whiteboards andfunction walls including a full range of attachable accessory items.Panel faces shall offer a choice of finishes including fabric, perforated metal,powdercoated MDF, laminate, timber veneer, fabric covered pinboard as well assingle and double glazing.Acoustic panels must be offered whenever required and must have an acousticsound absorption rate of not less than 60 NRC.ConnectorsThe connecting system must be able to achieve the following junctionsand connectionsa) 90º, 120º, 180ºb) two way, three way and four way junctions with either open access corners orclosed corners.c) Off module junctions i.e. return panels of common or differing heights able toachieve a 90º connection to a spine panel at any point along its length.Cable ReticulationThe system must include integrated components that provide efficient meansof routing services cabling to the panels from the ceiling, walls or floor. Such aspower blades, umbilicals or power poles.The system should include optional clip on segregated cable trays with a selectionof services outlet modules and softwiring connections.The softwiring electrical system shall be Schiavello Interpower or similar certifiedAS/NZS 3131.Aluminium FinishAll aluminium shall be powdercoated to a strong commercial finish.Colour as specified.WarrantyThe manufacturer shall warrant the system for a period of not less than 5 yearsagainst faulty materials and workmanship and shall guarantee the supply of partsand service of all standard components for a period of not less than 10 years fromdate of installation.system 45_13


Melbourne Head OfficeSchiavello (Vic) Pty Ltd1 Sharps RoadTullamarine VIC Australia 3043T: 61) 3 9330 8888F: 61) 3 9330 8899Melbourne ShowroomSchiavello (Vic) Pty Ltd31-49 Queensbridge StreetSouthbank VIC Australia 3006T: 61) 3 9674 1500F: 61) 3 9674 1650AdelaideSchiavello (SA) Pty LtdGround Floor, 101 Currie StreetAdelaide SA Australia 5000T: 08) 8112 2300F: 08) 8231 1419BrisbaneSchiavello (Qld) Pty Ltd265 Coronation DriveMilton QLD Australia 4064T: 07) 3368 3388F: 07) 3368 2125CanberraSchiavello (ACT) Pty Ltd2-6 Collie StreetFyshwick ACT Australia 2609T: 02) 6124 0500F: 02) 6280 4370DarwinSchiavello (NT)A division of Schiavello (Vic) Pty LtdOffice 1, Unit 5, 356 Bagot RoadMillner NT Australia 0810T: 08) 8948 1922F: 08) 8948 1622PerthSchiavello (WA) Pty Ltd1315 Hay StreetWest Perth WA Australia 6005T: 08) 9322 6555F: 08) 9322 1337SydneySchiavello (NSW) Pty Ltd69 Campbell StreetSurry Hills NSW Australia 2010T: 02) 9211 3311F: 02) 9212 3788JapanSchiavello Japan LimitedToranomon Marine Building1F,3-18-19, Toranomon Minato-KuTokyo 105-0001, JapanT: 81) 3-5402 7541F: 81) 3-5402 7542Middle EastSchiavello Project Solutions Pty LtdFestival TowerOffice Suite 504Dubai Festival City, DubaiUnited Arab EmiratesT: 971 4 363 5350F: 971 4 363 5351SingaporeSchiavello Singapore Pte LtdNo.1 Magazine Road#01-05 Central MallSingapore 059567T: 65) 6533 8011F: 65) 6533 2811www.schiavello.comSCH/SY45-02ASchiavello Group Pty Ltdreserves the right to changeany or all details withoutprior notice. Every efforthas been made to ensurethe information is accurateat the time of printing.

More magazines by this user
Similar magazines