Product Description Sheet 200 Series Benchtop Robot

Product Description SheetOne Henkel WayRocky Hill, CT 06067-3910Telephone: (860) 571-5100FAX: (860) 571-5465SYRINGE DISPENSING EQUIPMENTSyringe dispensing is commonly used as a low cost fluid deliverysystem when the dispense volumes are small.Part No.DescriptionDispensers98021 Syringe dispensing system, analog97006 Syringe dispensing system, digitalSyringes97207 10 ml, clear syringe barrel kit97263 10 ml, black syringe barrel kit97244 30 ml, clear syringe barrel kit97264 30 ml, black syringe barrel kit98314 55 ml clear syringe barrel kit98315 55 ml black syringe barrel kitAir Line Adapters97208 10 ml syringe air line adapter97245 30 and 55 ml syringe air line adapter300 ML CARTRIDGE DISPENSING EQUIPMENT300 ml cartridge dispensing is commonly used as a low cost fluiddelivery system when the dispense volumes are large.Part No.DescriptionDispensers98021 Syringe dispensing system, analog97006 Syringe dispensing system, digital300 ml cartridge adapter98319 300 ml pneumatic cartridge adapter98022 300 ml cartridge pusherVALVE DISPENSING EQUIPMENTValve dispensing is typically used with large dispense volumes tominimize the downtime associated with package change out and toimprove the bead precision, particularly the knit line.Part No.DescriptionValves98009 Light cure dispense valve98013 Cyanoacrylate dispense valve97113 Stationary dispense valve with 1/4" feedline97114 Stationary dispense valve with 3/8" feedline983914 Poppet valveController and Reservoirs97007 Integrated Semiautomatic Controller andReservoir, 0-100 psi97010 Integrated Semiautomatic Controller andReservoir, 0-15 psi97017 Integrated Semiautomatic Controller andReservoir, 0-100 psi, with Low Level Sensor97020 Integrated Semiautomatic Controller andReservoir, 0-15 psi, with Low Level SensorSolenoid Valve Module988000 Used to pneumatically control the 983914 Poppetvalve, the 98022 cartridge pusher or otherdispensing equipment using the I/O from therobot to control the air on/off.200 Series Benchtop RobotNorth American EquipmentMOUNTING RAILS FOR 3 AXIS ROBOTSA mounting rail is required when using Loctite mounting hardware forall 3 axis Benchtop robots.Part No.Description98328 3 3/4 inch bar with two cap screws98329 8 3/4 inch bar with two cap screws98330 12 inch bar with two cap screws98357 Z height adjustment plateMOUNTING ADAPTER FOR 4 AXIS ROBOTSA mounting adapter is required when using Loctite mounting hardwarefor all 4-axis robots. The mounting adapter includes a 360 degreerotation kit which allows the dispense tip to be fixed at any angle.Part No.Description98336 Mounting adapter for 4 axis robotsMOUNTING BRACKET KITSMounting bracket kits are used to grasp syringe barrels, 300 mlcartridges or dispense valves. Mounting rails or adapters are requiredto mount the brackets on the robot.Part No.Description98316 30 and 55 ml syringe mounting bracket kit98318 300 ml cartridge mounting bracket kit98326 98009 and 98013 valve mounting bracket kit98327 97113 and 97114 valve mounting bracket kit98406 983914 valve mounting bracket kitTIP LOCATOR BRACKETSTip locator brackets position the dispense tip to increase precision andare used to mechanically set the tip height during installation. Amounting bracket and rail, plate or adapter must be purchasedseparately. These are sized for 1”long, 25 gauge needles andmust be modified by the user for larger gauge sizes.Part No.Description98332 Tip locator bracket for 30 ml syringe98333 Tip locator bracket for 300 ml cartridge98334 Tip locator bracket for 98009 and 98013 valve98335 Tip locator bracket for 97113 and 97114 valve98407 Tip locator bracket for 983914 valve3, 5 AND 10 ML SYRINGE ADAPTERSThese adapters are inserted into the 30 ml syringe mounting bracketkit to adapt it for 3, 5 and 10 ml syringes.Part No.Description98320 10 ml adapter for use with 9831698321 5 ml adapter for use with 9831698322 3 ml adapter for use with 98316360 DEGREE ROTATION KITThis is used to allow for 360 degrees of rotation when using amounting bracket kit or tip locator. A 360-degree rotation kit is alreadyincluded with the mounting adapter for 4 axis robots.Part No.Description98325 360 degree rotation kitNOT FOR PRODUCT SPECIFICATIONSPLEASE CONTACT LOCTITE CORPORATION FOR ASSISTANCE: 1- 800-LOCTITE (1-800-562-8483)The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control.It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of propertyand of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, LOCTITE CORPORATION SPECIFICALLY DISCLAIMS ALL WARRANTIESEXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARISING FROM SALE OR USE OF LOCTITE CORPORATION’SPRODUCTS. LOCTITE CORPORATION SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST PROFITS. Thediscussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any LoctiteCorporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. Thisproduct may be covered by one or more United States or foreign patents or patent applications.Loctite and Zeta are trademarks of Loctite Corp. U.S.A.Document # 8903516, Date 06/06/2012

Product Description SheetOne Henkel WayRocky Hill, CT 06067-3910Telephone: (860) 571-5100FAX: (860) 571-5465200 Series Benchtop RobotNorth American EquipmentFigure 2: Dimensions of 200 Series Robot (3 axis model shown)NOT FOR PRODUCT SPECIFICATIONSPLEASE CONTACT LOCTITE CORPORATION FOR ASSISTANCE: 1- 800-LOCTITE (1-800-562-8483)The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control.It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of propertyand of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, LOCTITE CORPORATION SPECIFICALLY DISCLAIMS ALL WARRANTIESEXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARISING FROM SALE OR USE OF LOCTITE CORPORATION’SPRODUCTS. LOCTITE CORPORATION SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST PROFITS. Thediscussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any LoctiteCorporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. Thisproduct may be covered by one or more United States or foreign patents or patent applications.Loctite and Zeta are trademarks of Loctite Corp. U.S.A.Document # 8903516, Date 06/06/2012