ISSUE 5

eci.international.com
  • No tags were found...

Brityrex_12_Newslett.. - ECI International

Sponsored by:

INTERNATIONAL

For exhibitor/visitor info

please contact us today at:

sales@eci-international.com

Tel: + 44 (0) 1892 863888

Fax: + 44 (0) 1892 863828

www.eci-international.com

Media Sponsor:

9, 10, 11 October

EventCity, Manchester, England

ISSUE 5

Brityrex International gearing up to play host to the largest

gathering in the UK tyre calendar

Brityrex International 2012, Event City, Manchester, 9 -11 October 2012

The three-day show will bring together thousands of exhibitors, senior executives, industry

bodies and visitors, with a common purpose of doing business and sharing information in a

dedicated, trade-only environment.

Visitors to the show will appreciate the easy access to the new venue at EventCity

(www.eventcity.co.uk). Located next to the famous Trafford Centre, it enjoys direct access off

the M60 motorway network together with excellent public transport links from airports and rail

stations. Importantly, there is free onsite parking for 3,000 vehicles and the hotels and

entertainment of Manchester city centre are a short taxi ride away.

As the bi-annual focal point of the UK tyre and equipment sector, the show’s principal

sponsor, the NTDA, says:

“A visit to Brityrex is a must for anyone working in, or thinking of getting involved in the tyre

industry. The show will be a major gathering point for the industry, especially with the

impending legislation on tyre labelling and TPMS, which will be covered in detail through the free Tyretalk seminars. Along with dozens of

exhibitors showing the latest in tyres and equipment, the NTDA annual dinner and TAFF Awards is the flagship event running alongside the

exhibition,” says NTDA director Richard Edy.

A highly-visible Brityrex blimp, riding high above the venue, will ensure the location is easily identifiable and visitors can also take advantage

of a free Wi-fi service in the exhibition hall.

Pre-registration is now available to avoid queuing on the day; simply click the Brityrex links at www.eci-international.com

TVS Srichakra Limited is one of India’s largest two and three wheeler tyre and tube manufacturer, producing over 19

million tyres every year. As part of the USD 6.5 billion TVS Auto Ancillary Group, TVS Srichakra has over 29 years

experience and is making strong in-roads across the globe with a range of tyres for international markets.

Established in 1982, the Company started with tyres and tubes for two/three wheeler

applications for the domestic market. Today, the Company manufactures industrial

pneumatic/solid tyres, farm and implements tyres, skid steer tyres, multipurpose tyres and

flotation tyres and much more for the export market. This prolific product spread is created at

the Company’s state–of–the–art manufacturing facilities located at Madurai and Rudrapur. TVS

Srichakra is the leading supplier to several Original Equipment Manufacturers in India like

Bajaj, Hero MotoCorp, Honda Motors, M&M, TVS Motor Company, Yamaha Motors,

Piaggio etc.

Today, TVS Srichakra manufactures the “Eurogrip” brand of off-road tyres for the

overseas market, a portfolio that has seen considerable growth over the years. The

Company also has major OEM accounts in USA, Europe, Africa, South America, South

East Asia, Middle East and currently exports to over 65 countries across the globe.

The Company crossed Rs.10 Billion turnover in 2011 and has an ambitious growth

plan to close at Rs.20 Billion mark this year. TVS Srichakra Ltd. is one of the fast growing

companies in India and has been listed in the Top 500 companies.

TVS Srichakra is participating at Brityrex’12 in hall no 4, stand no 79 . For more details

please visit our website www.tvstyres.com


2012

Tyre Bay Direct

Tyre Bay Direct is looking to

strengthen its position as one of

Europe’s premier suppliers of

quality tyre service equipment and

consumable items by exhibiting at

this year’s Brityrex show. As one of

the newest supplier members of the

NTDA and with over 50 years

experience in the tyre industry Tyre

Bay Direct are keen to discuss the

needs of tyre fitters today and

provide valuable solutions.

Leigh Stote, Sales and Marketing

Director; says “Being heavily

internet and mail order based Tyre Bay Direct welcomes opportunities

to meet new and existing customers at events such as Brityrex and

build stronger relationships with our ever expanding customer base.”

Tyre Bay Directs main attraction will be their famous Unite machine

packages which all come with a 2 year manufacturers warranty as

standard. There will also be displays of consumable and garage

equipment including an impressive TPMS showing, demonstrating the

full range of lines that Tyre Bay Direct stock in their purpose built

20,000 sq ft warehouse in the Midlands!

As another big feature along with the tyre machinery, Tyre Bay

Direct will be showing off their

Uniflate nitrogen systems which

have been supplied to Formula 1

Grand Prix racing since 1992.

Additionally, the most advanced

customer retention package ever,

the Nitrofill Auto Club will be

unveiled which can increase

traffic to tyre centres up to 4 fold!

Combining this with the Uniflate

nitrogen systems which are

installed in thousands of tyre

centres in the UK means visitors

will see the very best options of

Nitrogen inflation.

www.tyrebaydirect.com

PCL’S Nexus

A New Generation For Nitrogen

PCL has chosen Brityrex

International 2012 for the UK

unveiling of its exciting new NEXUS

range of Nitrogen Generators and

Inflators at Stand 50.

The new range will further enhance

PCL’s reputation as the global market

leader in the design, manufacture

and distribution of digital tyre

Inflation equipment.

NEXUS is the most advanced

range of Nitrogen Generation and

Nitrogen Inflation equipment

available to date, bringing true

innovation in design to the Nitrogen

market.

As with all PCL products, the NEXUS range has been designed and

manufactured with the same principles that have established PCL’s

excellent worldwide reputation for high quality products:

NEXUS excels in:

• Performance – out-performing the competition with, faster flow

and faster inflation, getting the job done quicker. This focus on

performance and efficiency means increased revenue/profit

opportunities for your business.

• Quality – thoroughly tested to exceed international standards,

giving you complete peace of mind.

• Comprehensive Range – a wide range to meet any requirement –

“for any & every occasion”

• Longevity – using only the latest technologies and the highest

quality of components and materials, to deliver the reliability and

durability for the toughest of environments. Built to last!

• Experience – almost 75 years of designing and manufacturing

pneumatic equipment and a vision to proactively provide the best,

most reliable and efficient inflation equipment.

For more about NEXUS and how Nitrogen can help your business

prosper visit PCL at Stand 50.

Details of PCL’s full product range are available at

www.pclairtechnology.com

Michelin Training Centre

Established for over 25 years, the Michelin Training Centre in Stoke-on-Trent has long been considered the reference for tyre industry training in

the UK and Ireland. It offers a comprehensive portfolio of more than 100 training courses, many with City & Guilds, IMI and REACT accreditation,

covering all aspects and roles in the tyre industry. These range from fitting and technical courses for tyre fitters and technicians, to sales training

for site and field-based staff and management training and development courses for depot managers and business owners.

Training and development of people is essential for the future of every business, and that’s why we trained more than 1,500 people last year,

helping improve standards in the tyre industry. Well trained staff can bring increased sales, improved staff retention and higher levels of job

satisfaction; Michelin Training is proven to be a smart investment.

The fully equipped training centre in Stoke-on-Trent boasts the latest technologies, with six lecture rooms, an IT suite, on-site truck, agricultural and

earthmover workshops, mocked up tyre dealer premises and video / role-play facilities. Alternatively, members of our dedicated training team can

deliver training at your site, tailored to your requirements.

The Michelin Training Centre will be exhibiting at the Brityrex show for the first time in 2012 and we look forward to meeting you and discussing

your individual training needs.

www.michelintraining.co.uk


On time and on budget! A simple statement but a commitment that

Maritime Cargo Services (MCS) makes to all its clients in the tyre

industry.

Dedicated to delivering the highest possible standards of customer

service, MCS offers a highly cost effective, end-to-end supply chain

solution for all of your sea freight and container delivery requirements.

MCS is the leading freight forwarding specialist in the tyre industry

looking after more than 20 major tyre importers and managing the

Customs Clearance and delivery of thousands of containers to well over

a hundred tyre warehouses and depots throughout the UK and Ireland.

With estimates that shipping costs typically represent somewhere

between 3-10% of the street price of tyres, MCS appreciates that effective

freight management is a hugely important consideration for tyre

importers in today’s market.

To guarantee an optimum freight management service, MCS offers tyre

importers an online freight management and tracking system, MOATS,

which was designed to encompass all of the customer’s relevant shipping

information. Monitored, updated and available online 24/7, MOATS is

a fast, flexible and multi-faceted online system supplying tyre importers

with real-time information safely and securely and is provided to all

clients free of charge. Coupled with MCS’s proactive, efficient and

friendly team of freight management experts, the company has

revolutionised many of its client’s delivery systems.

Located on stand number 47, make MCS your first ‘port of call’ at

Brityrex. We look forward to welcoming you aboard with a bacon butty

and a drink.

www.maritimecargo.com

New Dealers The Challenge

For Vortex Exhaust

Vortex, making its first

appearance at the Brityrex

International Show has targeted

to sign up 10 new UK dealers

at the show and will visibly up

the ante in the drive to gain

more export sales.

Exhibiting on stand 43, potential customers can learn more

about the exciting British made revolutionary patented Vortex

exhaust.

“With our unique product range we can change the face of

the UK exhaust market” Barry Mead, MD of Vortex commented.

By dealing with Vortex, Garages, fitting stations and workshops

only need to hold limited amounts of stock to satisfy the vast

majority of the market. Vortex dealers need to be able to weld

and require pipe bending equipment, which can be supplied

as part of a dealership package. Vortex dealers can create

exhaust systems for cars, vans, pick-ups, 4x4’s, sports cars; the

market potential is endless.

Vortex systems are not “me-too” products. They are totally

different from mainstream exhausts and offer garages and

fitting stations opportunities to make good margins and deliver

real customer satisfaction. Because of the unique design all

Vortex exhausts are guaranteed to increase power and torque,

while at the same time reduce tailpipe emissions and best of all

save money on fuel bills.

Fleet managers could do far worse than spend 20 minutes

finding out how much they might save by fitting Vortex exhausts

to their vehicles.

Vortex is embracing an “Eco-management” philosophy that is

being rolled out across all of its products and intends to

announce some new initiatives at the show.

www.vortex-performance-exhausts.co.uk

MAM Software to showcase its Autopart Tyres

software with tyre labelling and other new features

MAM Software will be using the

Brityrex 2012 event to demonstrate

its Autopart Tyres Suite for tyre

distributors, auto centres and fast-fit

chains. This new best-of-breed

solution integrates functionality from

across MAM's software range to

deliver a rich business management

platform for companies in both

retail and wholesale sales.

The Suite provides a wealth of

core functionality including product and price management, purchase

order processing and comprehensive stock control. Flexible point-of-sale

capabilities cater for wholesale, retail and servicing operations while

dedicated e-commerce functionality facilitates online trading across the

supply chain. A powerful business intelligence module allows managers

to achieve an accurate assessment of their company's performance.

In addition to this core functionality, many new features will be on

display at the Brityrex event:

• EU tyre labelling functionality

• EDIWheel real time stock ordering

• SMS messaging directly from the system

• Comprehensive reporting features

• Sales, purchasing and nominal ledger functionality

• A sophisticated warehouse management module

To find out more about these features visit MAM Software at stand 48

at the Brityrex 2012 event.

GEBHARDT tire racks: Efficient and reliable

– Made in Germany

GEBHARDT was founded in 1892 and

since then has been focusing on products

“Made in Germany“. The company

considers tradition combined with

innovation as its core value. We have

always attached great importance to

working in international markets and we

want to expand our already advanced

“Tires & Wheels“ business even further.

With the introduction of the new ECOTIRErack®, we

conveniently round off the GEBHARDT range of services

regarding tire racks. The newly designed rack, which is entirely

manufactured in Germany in domestic production, sets a

benchmark regarding reasonable price, low weight and high

quality.

This was proved during a practical test which was executed at

a leading company of the sector before the market launch. The

GEBHARDT ECOTIRErack® is the perfect example for the fact

that reliability and quality do not inevitably stand for high prices.

Many companies have already chosen this tire rack as the

ideal solution for their warehouse. For more information on the

ECOTIRErack®, our complete product range and on what

GEBHARDT can do for you – visit us at this year’s Brityrex at Hall

4 / Stand 24.

www.gebhardt.eu


Perennial Brityrex exhibitors,

Hofmann Megaplan, will

once again be showing their

wares at this years Brityrex

event, and adding a bit of excitement

to the whole affair by running a

competition for a free Lever-less tyre

changer!

Last time round, the free entry

competition was well received,

and resulted in one lucky

visitor – Mill Tyres of Boston –

receiving a free lever-less

machine that has since become

the flagship of their tyre bay.

Displayed in the main foyer

for all visitors to see, entrants

will simply have to visit the Hofmann

Megaplan stand and fill in a brief questionnaire to

automatically put them in the hat. As per 2010, the lucky

winner will be selected from a hat by show organiser Paul

Farrant.

Also on the stand will be a selection from Hofmann

Megaplan’s extensive line-up, including the latest wheel

balancing technology with laser positioning, nitrogen inflation,

and an example of their premium quality lifting range.

As always, expert advice will be on hand in the form of Hofmann

Megaplan’s knowledgeable and enthusiastic technical team.

www.hofmann-megaplan.co.uk

High quality Chinese tyre manufacturer Aeolus will be exhibiting in its

own right for the first time at this autumn’s Brityrex International

exhibition in Manchester (Stand 45). This will provide the opportunity to

talk in-depth and face-to-face with the trade about the quality and value

available to commercial users.

Aeolus is among the longest-established Chinese tyre manufacturers,

having begun production in 1965. Since then it has developed into a

worldwide brand with a growing presence in the UK. This has recently

been reinforced with the launch of a dedicated new website to improve

awareness and knowledge of the company’s extensive range of

specialist tyre applications.

www.aeloustyres.co.uk includes size, application and technical details

for the comprehensive ranges of Aeolus TBR and OTR products covering

Regional Haul, Long Haul, Mixed Service and City Urban products for

commercial vehicle, coach, city buses, low loaders, semi-trailers and

tippers. Aeolus also supplies a wide range of OTR tyres for an extensive

variety of applications, from quarry to high speed crane.

At Brityrex the company will premiere the launch of new wider casing

Steer and Drive Axle tyres for commercial applications.

Infinity Tyres will be participating at this year’s Brityrex International

exhibition, the UK’s premier tyre trade and aftermarket equipment

show, where it will prove to be the perfect venue to get closer to its UK

customers, partners and associates.

Having had its formal introduction during its Partners Day trip in

China, and its European launch during the Reifen Essen 2012 Show,

Infinity will be very proud to show and discuss its new Ecosis and

Ecomax tyre range during Manchester’s show in October.

Our Infinity sponsored UK drift team, which is enjoying a very

successful 2012 season will be at the show to launch their new 2013

car, which will be displayed for the first time at the show.

www.infinity-tyres.com

Albrecht Auto-Zubehör GmbH, founded in 1919 and based in

Germany, is Germany's leading manufacturer and distributor of

plastic wheel covers. Our high quality products are distributed to

a worldwide market. Albrecht Auto-Zubehör GmbH offer a wide

range of wheel covers in different qualities, designs and inches.

We are very glad to have this platform at Brityrex to present our

wheel covers for the first time in GB.

On stand 103 we would like to welcome you and draw your

attention to our wheel covers, especially to our latest designs. Our

staff members will be pleased to answer all your questions and

give you all necessary information.

For further detailed information please visit our homepage

www.albrecht-az.de

Antyre is an emerging manufacturer of quality truck and bus

tyres that will be making its debut as an independent brand

at Brityrex International 2012.

Introducing the brand and building awareness among TBR

stockists and fleet buyers is the company’s major objective. A

range of products will be on show on the Antyre stand,

number 18.

Among these will be the new patterns TB1000 in size

385/55R19.5 and TB2000 in 445/45R19.5 plus

435/50R19.5.

Visitors to the Kings Road Tyres (KRT) stand at Brityrex will be able to select

from an unrivalled range of brands covering applications for truck, bus,

agricultural, OTR and industrial fitments.

With 40-years involvement in the wholesale sector, KRT prides itself on the

productive, long-term distribution relationships it has developed with many

of the world’s leading tyre manufacturers.

KRT offers commercial users an extensive choice of products from premium

OE manufacturers to exclusive distributorships. The company’s Truck & Bus

range includes brands such as Bridgestone, Continental, Goodyear and

Pirelli, with Firestone and Matador TBR in the mid-range sector with Aeolus

and Antyre completing the line-up.

For agricultural and industrial customers KRT is the exclusive

distributor for Bridgestone, Taurus AGR, Farmking, Jetire and Wanda.

They are also official wholesale partners for Michelin, Goodyear,

Trelleborg, Kleber and Firestone.

Completing the offer is KRT’s Kingstone private brand of tyres and tubes

for construction, OTR industrial applications and high speed crane.

“As the UK’s top tyre event Brityrex will be a great opportunity to

demonstrate our extensive ranges of brands across the market sectors we

are strongest in, truck, bus, agricultural, OTR and industrial applications,”

says Tim Bader, KRT’s Purchasing and Marketing Manager. “ In addition,

visitors can pick up copies of our new Commercial Range Guide on the

stand, which for the first time combines all products in a single publication.”


2012

In the build up to this year’s Brityrex International Show, REMA TIP

TOP AUTOMOTIVE UK Limited are preparing to open the company

doors in style.

The event promises to be a showpiece of the company’s most cutting

edge range of garage equipment and consumables to date. To be a part

of the show come and visit us between 9 - 11 October, 2012 EventCity,

Manchester– stand number 51, hall 4.

Visitors to the stand will have the opportunity to see spectacular new

additions to the range of workshop equipment which include the

Promaxx 8240-2 LL (leverless) tyre changer and Kendo 30 Lite. These

amazing new machines change standard tyre and wheel assemblies with

ease and make light work of the most demanding run flat tyres without

the assistance of tyre levers. In addition there will be a chance to see

demonstrations of the highly acclaimed Promont 924 Truck tyre changer

and a range of balancing machines for both car and truck including the

new Probalance NG wheel balance and diagnostic system and 7425

Professional car wheel balancer with 17" TFT monitor.

The Probalance NG (Next Generation) is a very exciting product

development which largely negates the need for manual operation,

relying on built-in automation to measure wheel size, balancing values

(processing optimum) and eccentricity of tyre, rim and wheel. The wheel

is even guided into position by an exclusive automatic lift called Zero

Weight.

This year’s show also presents the first chance for the tyre trade to

examine the NTDA award winning Ramrod TIRE SAFE safety inflation

enclosure at first hand.

TIRE SAFE will safely contain, and direct harmlessly, the explosive

release of pressure that occurs when either a tyre carcass or sidewall

suffers catastrophic structural failure.

TPMS will naturally also feature heavily at this year’s show for REMA

TIP TOP. To service the growing demand REMA TIP TOP AUTOMOTIVE

officially launch thenew ‘Sensor Intelligent Technology’ TPMS program

from Alligator. The new sens.it TPMS sensor provides a complete solution

for the replacement of OE TPMS sensors for both small and large tyre

shop chains.

In 2012, REMA TIP TOP AUTOMOTIVE UK Limited became official UK

distributors of the Werther range of lifting equipment.

The agreement with Werther signals the company’s real commitment to

provide a comprehensive installation and service package to its

customers. Two lifts will be featured on the stand at Brityrex including the

Werther S39 scissor lift and 301 two post lift.

REMA TIP TOP AUTOMOTIVE UK also welcomes its close friends

Compac to this years show, who will feature and demonstrate its quality

range of trolley jacks on the stand. Compac are renowned for long

service life, high quality raw materials and uncompromising attitude to

safety. Workshop personnel visiting the stand will also be interested in

Gaither's Bead Bazooka. The Bead Bazooka

combines the most powerful Automatic Rapid

Air Release System and easiestto-handle

tank for seating

tubeless tyre beads. Simply fill

the tank and FIRE! The

instantaneous blast of air from

the 6 Litre tank will work on

truck (including super singles),

passenger, motorcycle,

ATV and small AG tyres.

Demonstrations of

all the equipment

mentioned in this feature

will be run throughout the

course of the show. We look

forward to seeing you there.

www.rema-tiptop.co.uk

At Brityrex 2102, Harvie Tyres Limited will launch their

superb new range of Mondolfo Ferro workshop equipment.

The Harvie team will be located on stand 73, Event City,

Manchester. Harvie will be demonstrating the Raptor with the

"SENZA LEVA" (Without lever) tyre demounting technology

and AS944 LL tyre changing machines. The MT3200,

MT3400 Easy Alu and MT3350 Ergo Laser wheel balancers

will also be operating on the stand for the duration of the show

which takes place between 9th-11th October.

Harvie is excited to be exhibiting at Brityrex and believes

that it as a crucial platform to showcase new developments in

its range of capital equipment and workshop tools and

consumables. UK Sales Manager, Stuart John, is eager to

further grow market share of capital equipment in the UK and

states “the Mondolfo Ferro range of workshop equipment is an

exciting development for the company and is sure to provide

the quality and reliability demanded by our discerning

customer base”.

Harvie are also key distributors in the UK of Prema tyre

repair material, in addition to stocking a superb range of

airline equipment and accessories from PCL and balance

weights from Hatco. In fact Harvie supply everything for the

workshop including a superb range of bead lubricants,

associated chemical products, valves and accessories, air

tools and torque wrenches.

www.harvieprema.com

ENTERTYRES UK LTD is making its debut at Brityrex Int’12.

Company has many years experience with trading in high

quality retread car tyre within the UK market. Within last couple

of years tyres have been sold in the English, Scottish and Irish

market and the Company has achieved high sales targets and

has became a trusted and long term supplier for many tyre

companies throughout the UK.

ENTERTYRES UK LTD will be exhibiting on stand 50C at

Brityrex and during the show will exhibit summer and winter

retread car tyres range of popular sizes from 13 inch to 17 inch

and also commercial van tyres. Thanks to a professional

customer service from ENTERTYRES UK LTD all visitors visiting

stand 50C will be impressed by the product range and

information available and will be able to spend quality time

discussing their tyre requirements with a positive outlook on the

market. Tyres are ENTERTYRES passion. Visiting ENTERTYRES

UK LTD during this year's Brityrex show is highly recommended!

www.entertyres.com


SINOTYRE International Company Limited is one of the leading

tyre companies founded as per modern enterprise system and it

specializes in world tyre market research and Import & export

business. Thereinto, Exp. & Imp. business develops very rapidly.

It has built wide sales marketing networks all over the world, and

a lot of high grade tires made-in-China have been exported

oversea successfully by our global customers. We also introduce

some advanced culture, technologies, equipments and materials

which guarantee the company take a lead in this market. In

addition, nature rubber, auto parts and chemical additives are

also within our business scope.

SINOTYRE has its own production factory and one professional

technologist team which assure us for the different and special

exams and tests according to the different markets and clients.

SINOTYRE also has good relationships with different tyre

manufacturers and some other auto parts

factories which can meet the different and

individual requirement in this area.

In the new century, SINOTYRE will

develop itself step by step based on

the services with all the heart to any

friends around the worlds. What's

more, it has a professional, efficient

and reliable work-team who make

SINOTYRE be on a good wicket in the

further competition.

www.sinotyre.net

Cam Systems Takes Centre Stage at Brityrex with

its New Retail Customer Management Launch

and Tyre Labelling Consultations

Exhibiting at Brityrex after a long absence, Cam Systems, the leading

software solutions provider to the independent tyre industry, is taking the

opportunity to unveil its new Retail Customer Relationship Management

(CRM) application to its Cameo customers, providing them with options for

more effective customer contact, sales conversion and business intelligence

for retail operations at the counter, on the phone and over the web.

Early adopters of the Retail CRM module have worked with Cam Systems

to design key benefits into the new system such as optimising the capture

and maintenance of customer and activity data, converting immediate and

future business opportunity, understanding and utilising the most effective

communication channels with individual prospects and customers, and,

ultimately, being able to measure and direct advertising and marketing

expenditure more cost-effectively.

Moreover, with Brityrex being held only three weeks before the advent of

the 1 November EU legislation around tyre labelling, Cam will be

showcasing its tyre labelling solution on its Cameo platform. Cam’s Tyre

Labelling solution has been designed to offer Cam customers options to

present a professional, high quality image to motorists, providing retailers

with the opportunity to upsell to higher margin brands. The company is

inviting all Cameo customers and their business partners onto its stand to

discuss practical and operational considerations for tyre labelling

compliance.

www.cam-esystems.co.uk

Ling Long Tyres, manufactured by Shandong Ling Long Tyre

Company, will be participating at this year’s Brityrex International

exhibition, the UK’s premier tyre trade and aftermarket equipment

show, where it will prove to be the perfect venue to get closer to

its UK customers, partners and associates.

Ling Long Tyres were founded in 1975 in Zhaoyuan city, and

the company has devoted itself to the research and manufacture

of high quality tyres ever since. Today the company is among the

Top 500 Chinese Enterprises and is accredited as one of China’s

“Outstanding Private Enterprises”.

It is also one of the 3 largest tyre manufacturers in China and

ranked as No. 16 in the world in 2010. Furthermore, because of

its continuous focus on brand building and quality control, Ling

Long, which employs over 5000 people has been recognised as

one of China’s top 500 most valuable brands.

The company has been increasing its first-class Technical

Centre, post-doctoral workstation and is responsible for creating

the first noise lab in China.

Guizhou Tyre Company Ltd will once again be exhibiting at Brityrex –

Stand No 71.

Here we will be showing our range of Advance Radial/Bias OTR tyres,

Radial truck tyres, Agricultural tyres and Industrial/Fork Lift tyres.

For over 50 years we been manufacturing Industrial and OTR tyres from

our factory in Guiyang located in the South West of China.

We are now in the process of building a new factory to increase our

production capacity. It will have a land area of 1.5 million sq. metres and

a building area of 610,000 sq. metres with a planned capacity of 12.8

million tyres per year.

The new factory will be used to increase capacity of our current range

and produce a new range of radial passenger tyres and radial farm tyres.

These new additions to our range will enable us to supply to our customers

a greater range tyres across different sectors allowing for economical

sourcing and container filling.

We look forward to welcoming existing and potential new customers

to our stand.

www.advancetyre.biz

Bond International to exhibit six exclusive brands at Brityrex International

Leading tyre wholesaler Bond International has signed up for a major presence at October’s Brityrex

exhibition in Manchester.

The Pocklington, York-based company will be using the show to promote its portfolio of six exclusive UK

distributorships for brands including Marshall, Infinity, Admiral, Jinyu, Sailun and Rotalla.

Company founder and managing director, Reg Bond, says: “When we decide to promote the company we always give it 100% and do it in

style. That’s why we have taken a major stand at Brityrex that will give us the space and prominence to display our exclusive UK brands to

maximum effect. We have thousands of customers across the country and we want to give them a good reason to travel to the show and visit

our stand.

“The UK is a major international market for tyres and deserves to have a show that reflects that status. We hope other companies will follow

our lead and make Brityrex 2012 a show to remember.” www.bondint.co.uk


Philip White Tyres Ltd is an

independently owned family run company



established in 1982. The Company has a

wealth of experience in the tyre industry

being awarded with several exclusive tyre

manufacturer dealerships and can offer

the best quality tyres, products and

services at prices to suit all budgets.

As well as being a successful wholesaler

Philip White Tyres also has retail depots

in Northern and Republic of Ireland

providing an extensive range of garage

and motoring services. The Company is

looking for Falken Truck key dealers and

Ornet Car, Truck and Agricultural dealers throughout the UK.

For further information please visit our website

www.philipwhitetyres.com









Profil deals with production and wholesale of retreaded car tires for all types

of cars: personal, delivery and off-road ones, in many sizes and many

patterns of the tread, both winter and summer types.

The retreading, also called the regeneration, consists in placing a new layer

of the tread on the tire and strengthening the tire sides. The final product is a

tire whose parameters do not differ from the parameters of a new tire (equally

durable) and which is in fact more preferred in the world taking into

consideration environment protection (recycling)

The Profil company regenerates mainly tires for personal, delivery and offroad

cars, in typical sizes: 13, 14, 15, 16, 17, and 18 inch ones, as they

are the most popular sizes on the market. The technology of producing the

treaded tire and the tire itself are characterized by high quality, durability and

good use, which is especially important taking into account the safety of

driving. Apart from the above-mentioned features, it has much lower price

than the new tire. Our company buys the highest quality products from wellestablished

producers of rubber mixes and from foreign tire providers.

Since the beginning of its operation the “Profil” company has paid special

attention to the quality of produced tires. A number of tests carried out before

and after the regeneration allows us to produce a faultless tire which is ready

to be used.

www.profil-zro.com.pl

As of July, the first end consumer

package will be available for

HPW 380 coloured adhesive

weights. Containing six

adhesive weights of 60 grams

each, the package comes

with exactly the right size of

kit required to balance a

vehicle.

The packages are supplied

in a box that has room for 24

packages. Made of highquality

materials and

designed to be functional too,

the box can also be used as

a display stand. In addition to

silver, black and chrome, the

weight is now also available

in red, blue, yellow, orange,

white and anthracite.

The brand new Speedliner® adhesive strip for balance

weights is designed to help workshops save both time and

money in large quantities. Boasting an even higher initial tack

as well as the ability to remove the weight from the wheel rim

without leaving any traces, it makes balancing a breeze.

In June 2012 Hofmann Power Weight introduce its greatest

innovation yet. A patented new type of adhesive strip whose

name says it all: Speedliner. This product makes everyday life

in the workshop considerably easier thanks to the many

improvements it brings. And now the Speedliner® can be

found on all HPW 380 adhesive weights.

Nordexx® is NDI's (Nordisk Dæk Import A/S) Private Brand

tyre for cars and vans designed by NDI's innovative branch in

Denmark together with the tyre plant technical staff. The tyres

meet all requirements for any modern vehicle owner who

appreciates the diversity of models in summer and winter tyres.

The tyres meet all European and American standards and are

manufactured with an eye to the overall costs. This enables us

to offer a financially feasible product without having to

renounce comprehensive quality, design and accessibility.

www.ndi.eu


Come and see the Supertracker Computer

Wheel Aligner featured on “ Youtube” in

action. This system is setting the

market alight with its speed,

reliability and accuracy. With this

product there is no need to invest in a

specialist lift, so a cost saving there.

The Supertracker 410R can be used

anywhere. Alignment lift, four post

lift, two post Lift, pit, alignment tables,

even on the floor. You do not need a

dedicated area, allowing better

utilisation of the workshop space.

The rest of the range will be on display

as well. The all important print out is

available on five of our products. We as a company have a product

that meets all budgets and all technical requirements. As a UK

manufacturer we can build bespoke wheel aligners to meet any

customer specification.

Supertracker has established itself over the last twenty five years as

a company that suppliers products that “do the job” while providing

a substantial profit contribution to any company.

Stand number 62, come along and discuss your Wheel Alignment

needs with one of our technical staff.

www.supertracker.com

Winning the NTDA TAFF Tyre & Aftermarket Supplier of the Year award

has brought even more attention to the technical expertise of our TPMS

programme. As we are progressing with our training programmes all

across the UK we are receiving more and more positive feedback about

the expertise we are able to demonstrate and share with our customers.

The response has been greatly appreciated by everyone involved with

Autogem.

A common theme has been the ability of tyre traders and garages to

not only retain business which would have been lost without the right

equipment, but to also maximise the tools for greater revenues.

In 2011 we were predominantly informing customers about our

programme, so far in 2012 we have been in full swing training them.

This support will be supplemented by the introduction of further technical

TPMS product in the coming months.

All in all 2012 is looking like another busy year for Autogem where we

will be exhibiting at 8 shows and dedicating 25-30 evenings to training

and educational courses for our customers. Our mantra remains, think

TPMS think Autogem.

www.autogemconcepts.com

Haweka Provide Cost Saving Solutions

at Brityrex International

Haweka UK, the world’s leading

independent manufacturer of wheel

balancing accessories and commercial

vehicle alignment equipment, are

showing their comprehensive range at

Brityrex International.

The Haweka stand will showcase the

company’s complete range of

commercial vehicle alignment

equipment including the all-new Axis

4000. This fully computerised system

can now include a complete data set

of truck wheel alignment settings to enable real time comparison of

actual readings against manufacturers specifications. The greatest

advantage of the Haweka range is speed. There is no other wheel

alignment machine that allows the operator to measure a twin axle

semi-trailer in 10 minutes. The Haweka range is able to do this

thanks to its patented wheel clamps, which are attached to the

wheel rim by means of powerful magnetic feet (with additional grab

arms for aluminium rims) and the measurement can begin

immediately. These unique clamps are used on all Haweka aligners.

John Pullin of Haweka UK said: “In today’s tough economic climate

the importance of correct vehicle alignment cannot be over

emphasised. The equipment makes it possible for the commercial

vehicle owner/operator to easily and quickly unlock the savings

available from reduced fuel consumption and tyre ware. A one

degree misalignment on one axle could increase fuel consumption

by around 5%.”

To view the new generation of wheel balancing accessories and

discover how to reduce the running costs of your commercial fleet

visit Haweka UK at Brityrex International on stand number 53 or go

to www.haweka.co.uk

Westlake Tyres, manufactured by ZC Rubber –the world’s 10th largest tyre

maker and China’s biggest producer of rubber products– will be participating

at this year’s Brityrex International exhibition, the UK’s premier tyre trade and

aftermarket equipment show, where it will prove to be the perfect venue to get

closer to its UK customers, partners and associates.

After having had some of its Senior Management visit some of its European

Partners in April, Westlake are very excited about participating at Brityrex

2012 because of the opportunity to show its wide range of products to the

visiting public and reinforce the strong relationship it has with its partners,

customers and future clients.

ZC Rubber, which has over 50 years experience in making tyres, expects

its production capacity to reach 12 million pieces of truck/bus radial tyres

and 20 million passenger/SUV tyres in 2012.

With over 20,000 employees and hundreds of R&D staff, Westlake is

selling its range in over 150 countries. Westlake’s quality control complies

with the ISO 9000 requirements and tyre quality meets DOT and ECE

standards.

Nortenha develops its activity as a retreader and tyre dealer, since the

beginning of the 60´s and produces a large range of retreaded tyres, as

passenger, 4x4, light truck and truck, agricultural applications, industrial

and earthmoving. We also buy and sell new tires in all main brands

Nortenha has two laboratories that support manufacturing activity: one

for quality control of raw materials, used in the retreading process; and

one for tyre testing, where Nortenha performs load/speed tests in

accordance with Regulations ECE N. º 108 and 109. This latest

laboratory also performs balancing tests.

At the end of the year 2000, Nortenha certified its manufacturing

process according with the ISO 9001, BVC – Bureau Veritas Certification

N.º 209163, ensuring full compliance with the legal and quality

standards requirements.

In early 2004, Recauchutagem Nortenha obtained the approval of its

manufacturing unit, with the numbers E21 - 108R020004 and E21 -

109R020005. www.nortenha.pt

For full exhibitor list please visit www.eci-international.com

Note from the Organisers: The Publishers and Organisers do not necessarily agree with the views expressed by contributors, nor do they accept any responsibility for any errors of interpretation in the subject matter of this newsletter.

More magazines by this user
Similar magazines