Uncontrolled

dtl.connectors.co.uk
  • No tags were found...

EMI/RFI shielding interconnection systems - DTL Connectors

EMI / RFI shielding

EMI / RFI shielding interconnection systems

interconnection systems

Uncontrolled Copy


Uncontrolled Copy


Visions


wants to realize, then there is also no motive

to make any efforts.


We have plenty of visions and the motivation to turn unusual

ideas into reality. As a motive and motivation – every day anew.

Visions

If there no vision in life to strive for, to long for, that one

Welcome to Inotec electronics.

Uncontrolled Copy


Welcome

Welcome

Uncontrolled Copy

A continuous interest in the research of new technologies and its further development are our drive and

demand at the same time. From the very beginning of our now 25 years of existence.

Our focal points are the innovative development and production of EMC-compatible electromechanical

components in electronics. And the spectrum of applications is varied. From measurement and control

technology and traffic engineering via telecommunications to applications in medical and military technology.

Through consequent further development, each one of our products is always state-of-the-art.

We give you our word on this.

We attach great importance to individual customer service. That is because only due to permanent

dialogue with our customers and the very personal ambitions of the individual, we keep obtaining new

ideas and consequently, new products. One of our maxims is to always be one step ahead!


Our success in short.

In 1979, we commenced with the manufacturing and distribution of connectors

and individual developments according to customer requirements.

In 1981, we developed EMI / RFI shielding full metal hoods for D-Sub connectors

with special EMI / RFI protection, optimal connection of cable shielding at low

transition resistance to the metal hoods, by avoiding any air gaps. We call this

360° contact “crimp flange system”.

Uncontrolled Copy

In 1985, the company name changed to Inotec electronics GmbH. Resulting

from the continuous expansion of our product range, meanwhile, the largest

range of EMI / RFI shielding full metal hoods for D-Sub connectors was created.

In 1993, the relocation from Heilbronn to the new company building in Lauffen

took place.

In 1997, the market’s requirements became more complex and we developed

the first BUS hoods. This was the beginning of a special full metal hood series

with integrated PC-board that has been continued to date.

In 1999, in the 20th year of our existence, we added to our product range of

EMI / RFI shielding full metal hoods, the hoods for an additional connector family:

DIN 41612.

In 2003, we moved into our new building. With this plant 2, it was possible to

expand the area development and construction substantially.


Table

Table of

contents

Series M1 I DG09M1, DG15M1, DG25M1, DG37M1 02-03

DG50M1

Series M2 I DG09M2, DG15M2, DG25M2, DG37M2 04-05

DG50M2

Series M3 I DG09M3, DG15M3, DG25M3, DG37M3 06-07

DG50M3

Series MS I DG09MS, DG09MS-1, DG15MS, DG15MS-1 08-11

DG25MS, DG37MS, DG50MS

DG09MS-61, DG09MS-80, DG09MS-90

Uncontrolled Copy

Page

Series MS-2 I DG09MS-2, DG09MS-4, DG15MS-2, DG25MS-2 12-13

DG37MS-2, DG50MS-2

Series MSX I DG09MSX, DG09MS-1X, DG15MSX, DG25MSX 14-15

DG37MSX, DG50MSX, DG104MSX

Series M11 I DGA09M11, DGA15M11, DGA25M11, DGA37M11 16

Series M30 | DGA09M30, DGA15M30, DGA25M30 17

Series MSB I DG09MSB, DG15MSB, DG09MSBS 18

Special hoods I DG50MFK, DGA25M30-Cxxx

DGA09M30-Cxxx, DGA15M30-Cxxx 19


of contents

Coding system I Coding system for D-Sub connectors 20-21

Series MSF I DG48MSF-1, DG48MSF-2 22-26

for DIN 41612

DG48MSF-3, DG48MSF-91

Accessories I DTE-x, DTF-x, KOE-1, LPH-1 27-28

Series MSF

BEB-91, KOS-91, FC48S, FCC1S-200, FCC2S-200

Order code I 29

for Series MSF

Uncontrolled Copy

Page

Accessories I Crimp flange technique for circular connectors 30-31

Circular Connectors MIL-C-5015, MIL-C-26482, MIL-C-38999

Series KD I KD114-x/x, KD116-x/x, KD220-x/x 32-33

Cable glands

Connectors I 34-35

Accessories I 36-41

Tools I 42-47

Technical information I 48-49


Series

M1

Standard hoods for external locking systems – Overall height 40mm

EMI / RFI shielding all metal hoods made from die-cast zinc

Stable mechanical construction

Large dimensioned cable space inside the hoods

Central grounding post inside the hoods

Hoods with 2 or 3 cable openings permit a free selection

of the cable input, or to make in / out parallel connections

Cable entries with double dove-tail grooves for low

impedance connections

Unused cable openings will be EMI / RFI protected

by inserting included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed

by available die-cast zinc cable clamps

Accessories: see page 36

DG09M1 For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15M1 For standard 15 way or 26 way HD D-Sub Dimensions in mm

DG25M1 For standard 25 way or 44 way HD D-Sub Dimensions in mm

Uncontrolled Copy

DG37M1 For standard 37 way or 62 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover 1)

1 Metal plug

1 Screw M2,5x4,5 for grounding post

3 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5 for

connector and slide lock fastening

All screws with self forming threads

1)

Metal hoods can also be delivered

with thread 4-40 or M3.

Part No. DG09M1/4-40, DG09M1-3

Delivery without special screws

Hood assembly consists of:

1 Metal hood with cover 1)

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

All screws with self forming threads

1)

Metal hoods can also be delivered

with thread 4-40 or M3.

Part No. DG15M1/4-40, DG15M1-3

Delivery without special screws

Hood assembly consists of:

1 Metal hood with cover 1)

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5 for

connector and slide lock fastening

All screws with self forming threads

1)

Metal hoods can also be delivered

with thread 4-40 or M3.

Part No. DG25M1/4-40, DG25M1-3

Delivery without special screws

Hood assembly consists of:

1 Metal hood with cover 1)

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5 for

connector and slide lock fastening

All screws with self forming threads

2

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.

1)

Metal hoods can also be delivered

with thread 4-40 or M3.

Part No. DG37M1/4-40, DG37M1-3

Delivery without special screws


Series

M1

Standard hoods for external locking systems – Overall height 40mm

DG50M1 For standard 50 way or 78 way HD D-Sub Dimensions in mm

Robust metal hoods made out of die-cast zinc with excellent

protective characteristics against destructive radiation, for

Sub-D connectors corresponding to DIN 41652/MIL-C-24308.

The M1 series was developed by Inotec for externally applied

slide locks, such as the Inotec series DV. This hood series

is specifically used where cables are required to be frequently

coupled and the utilization of jackscrew-type hoods are either

too cumbersome or time consuming.

The hood width of the 9-37 way hoods is 14.8 mm and can be

used with the 15.08mm front plate units of a 19” rack-system

and be aligned without any interference to one another.

Technical information and applications

Hood assembly consists of:

1 Metal hood with cover 1)

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5 for

connector and slide lock fastening

All screws with self forming threads

1)

Metal hoods can also be delivered

with thread 4-40 or M3.

Part No. DG50M1/4-40, DG50M1-3

Delivery without special screws

There are gripping shoulders on the hood end which enable

a trouble-free extraction of the connection even with tightly

packed aligned hoods, without the need for that bad habit

of pulling on the cables.

The interior space is well proportioned to allow ample room for

all expected cabling. Every hood permits the looping through

of cables. The cable entries are lined with grooves in which

the pre-assembled crimp flanges or cable clamps with the corresponding

cable are pressed in. Cable entries not required

are sealed with the supplied metal plugs.

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 3


Series

M2

Vertically extended hoods for external locking systems – Overall height 55mm

EMI / RFI shielding metal hoods made from die-cast zinc

Stable mechanical construction

Large dimensioned space inside the hoods for the use

of mixed connectors, built in electronic circuitries etc.

Central grounding post inside the hoods

Hoods with 2 or 3 cable openings permit a free selection

of the cable input, or to make in / out parallel connections

Unused cable openings will be EMI / RFI protected by

inserting included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed by

available die-cast zinc cable clamps

Accessories: see page 36

DG09M2 For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15M2 For standard 15 way or 26 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

1 Screw M2,5x4,5 for grounding post

3 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

Cable outlets different to standard.

Please contact factory for accessories.

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

DG25M2 For standard 25 way or 44 way HD D-Sub Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

DG37M2 For standard 37 way or 62 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

4

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

M2

Vertically extended hoods for external locking systems – Overall height 55mm

DG50M2 For standard 50 way or 78 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

The M2 series was developed by Inotec for such applications

which could not be covered with the M1 series. The

overall concept of the M1 series was none the less maintained.

For applications requiring a large interior area such as mixed

connectors with coaxial, high-current, high-voltage inserts or

flat cable connectors, where the construction of such link-up

systems requires a greater insertion depth, the M2 series has

been extended 15mm beyond that of the M1 series.

Technical information and applications

The relatively large interior area contains a row of extra

application possibilities which cannot be realized with the M1

series, as for example: the insertion of filter arrays, electronic

circuitries with cable terminals or for program plug applications

etc.

The cable entries have double dove-tail grooves in which the

pre-fabricated assemblies with crimp flanges or cable clamps

are pressed in. Cable entries not required, are sealed by

pressing in the supplied metal plugs into their positions.

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 5


Series

M3

Hoods for “push-on” automatic locking system – Overall height 40mm

EMI / RFI shielding metal hoods made from die-cast zinc

Developed by Inotec for a slide lock system which will

move into the locked position when mating the opposite

connector

Cable entries with double dove-tail grooves for low

impedance connections

Central grounding post inside the hoods

Recommended for applications which require speedy

cable change

Unused cable openings will be EMI / RFI protected

by insertion of included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed

by available die-cast zinc cable clamps

Accessories: see page 36

DG09M3 For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15M3 For standard 15 way or 26 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

1 Screw M2,5x4,5 for grounding post

3 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

DG25M3 For standard 25 way or 44 way HD D-Sub Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

DG37M3 For standard 37 way or 62 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

6

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

M3

Hoods for “push-on” automatic locking system – Overall height 40mm

DG50M3 For standard 50 way or 78 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

1 Screw M2,5x4,5 for grounding post

4 Cover screws M2,5x7

2 Special screws 4-40 UNCx7,5

for connector and slide lock fastening

Screws with self forming threads

The M3 series was developed by Inotec for the EDVL*

automatic locking system which is specially used when cables

have to be frequently changed and where a rapid and secure

locking is required.

The slide lock* installed on the connecting backshell remains

in the locked position by means of a blade spring. When

mating, the slide lock snaps into the lock tabs* mounted on

the opposite connector. In order to unlock, simply press the

slide lock lever and disconnect the cable assembly.

(*See page 37 for part numbers)

Technical information and applications

Gripping shoulders on the hood end enable a trouble-free

extraction of the connection even with tightly packed aligned

hoods, therefore avoiding that bad habit of pulling on the

cables.

The interior space is well proportioned to allow ample room for

all expected cabling. The cable entries are lined with grooves

in which the pre-fabricated crimp flanges or cable clamps with

the corresponding cable are pressed in. Cable entries not used

are sealed with the supplied metal plugs.

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 7


Series

MS

Standard hoods with jackscrew locking system – Overall height max. 40mm

EMI / RFI shielding all metal hoods made of die-cast zinc

Stable mechanical construction

Jackscrew locking system recommended for applications

under vibration conditions

Central grounding post inside the hoods

Hoods with 2 or 3 cable openings permit a free selection

of the cable input, or to make in / out parallel connections

Unused cable openings will be EMI / RFI protected

by insertion of included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed

by available die-cast zinc cable clamps

Accessories: see page 36

DG09MS For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG09MS-1 For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15MS For standard 15 way or 26 way HD D-Sub Dimensions in mm

Uncontrolled Copy

DG15MS-1 For standard 15 way or 26 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1),2)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG09MS-3

2)

Please contact factory for other

jackscrew types

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1) , 2)

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG09MS-1-3

2)

Please contact factory for other

jackscrew types

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

2 Jackscrews 4-40 UNC 1),2)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG15MS-3

2)

Please contact factory for other

jackscrew types

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1),2)

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG15MS-1-3

2)

Please contact factory for other

jackscrew types

8

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

MS

Standard hoods with jackscrew locking system – Overall height max. 42mm

DG25MS For standard 25 way or 44 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC 1),2)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG25MS-3

2)

Please contact factory for other

jackscrew types

DG37MS For standard 37 way or 62 way HD D-Sub Dimensions in mm

DG50MS For standard 50 way or 78 way HD D-Sub Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC 1),2)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG37MS-3

2)

Please contact factory for other

jackscrew types

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC 1),2)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG50MS-3

2)

Please contact factory for other

jackscrew types

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 9


Series

MS

Standard hoods with jackscrew locking system

EMI / RFI shielding metal hoods made of die-cast zinc

Stable mechanical construction

Central grounding post inside the hoods

Hoods with 2 or 3 cable openings permit a free selection

of the cable input, or to make in / out parallel connections

Unused cable openings will be EMI / RFI protected by

inserting included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed

by available die-cast zinc cable clamps

Jackscrews with spring washers

Special screws for improved handling

For applications under hard vibration conditions

For all connectors sizes (see page 8 and 9)

Accessories: see page 36

DG09MS-61 For standard 9 way or 15 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Hexagonal female jackscrews 4-40 UNC 1)

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG09MS-63

DG09MS-80 For standard 9 way or 15 way HD D-Sub Dimensions in mm

Uncontrolled Copy

DG09MS-1-80 For standard 9 way or 15 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

All standard MS hoods shown on page 8 and 9 are available as modification -61 / -63 / -80 / -90

10

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

MS

Standard hoods with jackscrew locking system

DG09MS-90 For standard 9 way or 15 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews M3

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

DG09MS-1-90 For standard 9 way or 15 way HD D-Sub Dimensions in mm

Standard hoods with jackscrew locking system

Robust metal hoods made out of die-cast zinc with excellent

protective characteristics against destructive radiation for

D-Sub connectors corresponding to DIN 41652 / MIL-C-24308

and IEC 807-2. With the MS series Inotec developed hoods

with a jackscrew locking system to be specifically applied

where cables are not required to be frequently coupled and

where a secure locking is required. Through the play free

connector link-up, this kind of locking is especially recommended

for applications under vibration conditions. The hood

width of sizes 9-37 is 14,8mm and allows a side by side

installation when using the small slide-in units (15,08mm) of

a 19“ rack-system.

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews M3

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

In order to fulfill most of the application tasks, this consists of

7 different hoods. There are gripping shoulders on the hood

end which enable a trouble-free extraction of the connection

even with tightly packed aligned hoods, therefore avoiding

that bad habit for pulling on the cables.

The interior space is large enough for the most usual forms of

cabling. Hoods larger than size 15 possess 3 cable entries and

also permit the looping through of cables. The cable entries

are lined with double dove-tail grooves in which the pre-fabricated

crimp flanges or cable clamps with the corresponding

cable are presses in. Cable entries not required are sealed

with the supplied metal plugs.

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 11


Series

MS-2

Vertically extended hoods with jackscrew locking system – Overall height max. 55mm

EMI / RFI shielding all metal hoods made of die-cast zinc

Jackscrew locking system recommended for applications

under vibration conditions

Large dimensioned space inside the hoods gives a large

area for the use of mixed connectors, built in electronic

circuitries etc.

Hoods with 2 or 3 cable openings permit a free selection

of the cable input, or to make in / out parallel connections

Unused cable openings will be EMI / RFI protected

by insertion of included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed

by available die-cast zinc cable clamps

Accessories: see page 36

DG09MS-2 For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG09MS-4 For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15MS-2 For standard 15 way or 26 way HD D-Sub Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG09MS-2-3

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG09MS-4-3

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG15MS-2-3

DG25MS-2 For standard 25 way or 44 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG25MS-2-3

12

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

MS-2

Vertically extended hoods with jackscrew locking system – Overall height max. 57mm

DG37MS-2 For standard 37 way or 62 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG37MS-2-3

DG50MS-2 For standard 50 way or 78 way HD D-Sub Dimensions in mm

The MS-2 series was developed by Inotec for this type of

applications requiring a large interior area such as mixed

connectors with coaxial, high-current, high-voltage inserts or

flat cable connectors. Because the construction of this type

of link-up systems requires a greater insertion depth, the

MS-2 series has been extended 15mm beyond that of the

MS series.

Technical information and applications

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG50MS-2-3

The overall concept of the MS series was none the less maintained.

Furthermore the relatively large interior area contains

a row of extra application possibilities which cannot be implemented

with standard hoods, as for example the insertion

of filter arrays, electronic circuits with cable terminals or for

applications as complex program plugs etc.

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 13


Series

MSX

Hoods for shielding high EMI / RFI levels and frequencies – Overall height max. 54mm

EMI / RFI shielding all metal hoods made from

die-cast zinc especially engineered for use at high

frequency / high distortion levels

Modifications to meet users requirements possible

Jackscrew locking system recommended for applications

under vibration conditions

Large dimensioned space inside the hoods needed for the

use of mixed connectors, built in electronic circuitries etc.

Bores in the screwheads permit the installation of a

safety wire to avoid unauthorized disconnection

Unused cable openings will be EMI / RFI protected by

insertion of included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

Accessories: see page 36

DG09MSX For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15MSX For standard 15 way or 26 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Special hexagonal jackscrews M3

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

DG09MS-1X For standard 9 way or 15 way HD D-Sub Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Special hexagonal jackscrews M3

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

Hood assembly consists of:

1 Metal hood with cover

2 Special hexagonal jackscrews M3

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x7*

*Screws with self forming threads

DG25MSX For standard 25 way or 44 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Special hexagonal jackscrews M3

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

14

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

MSX

Hoods for shielding high EMI / RFI levels and frequencies – Overall height max. 56mm

DG37MSX For standard 37 way or 62 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Special hexagonal jackscrews M3

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

DG50MSX For standard 50 way or 78 way HD D-Sub Dimensions in mm

The MSX series was developed by Inotec for applications

requiring special attention to high power and/or high frequency

EMI/RFI radiation.

The connector is embedded inside the metal hood. When

mating this assembly, the front-side of the hood is adjoining

the front panel for a secure seal between these two units. If

the surface of the front panel is uneven, an additional flexible

EMI gasket could be installed.

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Special hexagonal jackscrews M3

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

DG104MSX For 104pol. HD D-Sub Dimensions in mm

Technical information and applications

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Metal plugs

2 Jackscrews 4-40 UNC

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

2 Spring washers

*Screws with self forming threads

For the most common applications, where the mating connector

is installed behind the front panel, the position of the

connector inside the hood to its front, relates to the thickness

of the front panel including any gaskets used. The construction

of this system allows its adaptation to most customers

applications. As a standard, Inotec delivers these hoods

(and accessories*) for 2,5mm front panels. For other applications

please contact factory.

(*Special female jackscrews DV-B3/1-2 to be mounted on front panel see page 36)

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 15


Series

M11

Piggy-back adapter hoods with jackscrew locking system – Overall height 30mm

EMI / RFI shielding metal hoods made of die-cast zinc

for the adaption of 2 connectors installed in an opposite

position and 1 cable outlet

For multiple parallel connections

Jackscrew locking system recommended for applications

under vibration conditions

Central grounding post inside the hoods

PC boards with 1:1 linkage and cable connections available

Extended applications by using only one connector

on the mating side and a metal plate in the rear position

to install the additional components

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed

by available die-cast zinc cable clamps

Accessories: see page 36

DGA09M11 For two standard 9 way or 15 way HD D-Sub Dimensions in mm

DGA15M11

DGA25M11

For two standard 15 way or 26 way HD D-Sub Dimensions in mm

For two standard 25 way or 44 way HD D-Sub Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DGA09M11-3

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DGA15M11-3

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DGA25M11-3

DGA37M11

For two standard 37 way or 62 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DGA37M11-3

16

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

M30

Piggy-back adapter hoods with jackscrew locking system – Overall height 66mm

DGA09M30 For two standard 9 way or 15 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

2 Hexagonal jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x6*

2 Spring washers

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DGA09M30-91

DGA15M30 For two standard 15 way or 26 way HD D-Sub Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

2 Hexagonal jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x6*

2 Spring washers

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DGA15M30-91

DGA25M30 For two standard 25 way or 44 way HD D-Sub Dimensions in mm

The DGA series made out of die-cast zinc was developed

by Inotec as a piggy-back adapter hood with cable ports.

The hoods can equally be used as a gender changer for

pins / sockets with or without cable entry.

Linkage of the connectors to one another can be achieved

with available printed circuit* boards.

If no connector has been inserted into the rear side of the

hood, the opening can be closed with a metal plate* which for

example can take up LEDs, mini switches, coaxial connectors

and similar items.

DGA09M30, DGA15M30, DGA25M30

An additional type of adapter hood with an extra large inside

space has been developed for applications requiring built in

compact electronic circuitries.

These hoods have been extended compared to the standard

DGA series. A further speciality are two side by side cable

entries positioned 90° of the mating direction.

Uncontrolled Copy

Technical information and applications

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

2 Hexagonal jackscrews 4-40 UNC

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

2 Spring washers

*Screws with self forming threads

(*Accessories: see page 36)

All piggy-back adapter hoods are available to snap on to DIN-Rail 35mm (EN50022)

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 17


Series

MSB

Universal hoods for BUS applications using Sub-D connectors – Overall height max. 63mm

EMI / RFI shielding metal hoods made of die-cast

zinc especially designed for BUS-applications and high

distortion levels

Jackscrew locking system recommended for applications

under vibration conditions

Two 30° cable entries with double dove-tail grooves for

low impedance connections

Design allows the installation of one upon onother

Unused cable openings will be EMI / RFI protected by

insertion of included metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

Delivery as empty hoods and also as complete units for

common BUS systems or according to customer requirements

Accessories: see page 36

DG09MSB For standard 9 way or 15 way HD D-Sub Dimensions in mm

DG15MSB For standard 15 way or 26 way HD D-Sub Dimensions in mm

DG09MSBS For standard 9 way or 15 way HD D-Sub Dimensions in mm

Copy

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

1 Hexagonal jackscrew 4-40 UNCx16,5mm 1)

1 Hexagonal jackscrew 4-40 UNCx58,5mm 1)

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Screws can also be delivered with metric

thread M3. Part No. DG09MSB-91

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

1 Hexagonal jackscrew 4-40 UNCx16,5mm 1)

1 Hexagonal jackscrew 4-40 UNCx58,5mm 1)

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Screws can also be delivered with metric

thread M3. Part No. DG15MSB-91

Hood assembly consists of:

1 Metal hood with cover

1 Jackscrew 4-40 UNCx41 1)

1 Jackscrew 4-40 UNCx58,5 1)

2 Spring washers

1 Screw M2,5x4,5 for grounding post*

3 Cover screws M2,5x6*

*Screws with self forming threads

1)

Screws can also be delivered with metric

thread M3. Part No. DG09MSBS-91

Picture shows an open MSBS-hood with installed PC board

for BUS application according to customer requirement. PCB

developed by Inotec. Hoods can be mounted one upon

another in a distance of 33mm without blocking the access

to the jackscrews.

Available for all BUS systems.

Uncontrolled

Universal hoods for BUS applications

18

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Special hoods

For special applications

DG50MFK For 50 way IDC flat cable connectors Dimensions in mm

Hood assembly consists of:

1 Metal hood with cover

1 Metal plug

2 Spring washers

2 Jackscrews 4-40 UNC 1)

1 Screw M2,5x4,5 for grounding post*

4 Cover screws M2,5x7*

*Screws with self forming threads

1)

Jackscrews can also be

delivered with metric thread M3.

Part No. DG50MFK-3

Different cable outlets, please contact

factory for accessories

DGA25M30-Cxxx D-Sub distributor 9 way Dimensions in mm

Example

DGA09M30-C101 Hood with additional crimp adapter Dimensions in mm

Uncontrolled Copy

Hood assembly consists of:

for snap on DIN rail

Hood assembly according to customer

requirements

various assemblies

male and / or female connectors

max. 4 connectors

Part No. DGA25M30-Cxxx

Hood assembly consists of:

1 Metal hood DGA09M30 (s.P.17)

1 Crimp adapter

1)

Also available with 2 crimp adapters

Part No. DGA09M30-C102

Crimp flange and crimp ferrule to be

ordered separately.

Example

DGA15M30-C101 Hood with additional crimp adapter Dimensions in mm

Hood assembly consists of:

1 Metal hood DGA15M30 (s.P.17)

1 Crimp adapter

1)

Also available with 2 crimp adapters

Part No. DGA15M30-C102

Crimp flange and crimp ferrule to be

ordered separately.

Example

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 19


Coding Technology

Coding technology for D-Sub connectors

Secure insertion and easy handling of the coding pins

with special insertion tool

For Inotec metal hoods series

Connectors with riveted coding elements

Tool for the exact assembling and alignment of the

coding elements on a front plate

Connectors

with riveted coding elements

Hood assembly consists of:

Connectors with riveted coding elements

Part No. upon request

Dimensions A + C see page 34.

Coding elements

Code pins

Female jackscrew

Hood assembly

consists of:

100 pieces

Part No. KOP-01

Assembling tool for coding elements Dimensions in mm

Hand tool

for coding pins

Hood assembly

consists of:

100 pieces

Part No. KOS-01

Part No. A B

KOB-4-40/4-40 UNC 4-40 UNC 4-40

KOB-4-40/M3 UNC 4-40 M3

KOB-M3/M3 M3 M3

Part No. A B

Hood assembly

consists of:

2 Female jackscrews

2 Spring washers

2 Nuts

2 Washer

KOM09 25,0 39,0

KOM15 33,3 47,3

KOM25 47,0 61,0

KOM37 63,5 77,5 (see also page 45)

Part No. KOD100

Uncontrolled Copy

20

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Coding Technology

Coding system for D-Sub connectors

Accessories

With the coding system that was newly developed by Inotec,

incorrect connecting of close and similar plug-in connections

can be prevented in a simple way. The system is applicable to

the Inotec hoods and connectors and can, if necessary, be

used to upgrade already existing devices or systems. 70 variations

can be obtained with this system.

Notes concerning connector coding

Coding is always required when there are several connecting

outlets of the same type at the device. Optical identifications

alone do not provide any protection against negligence or

even incorrect matings when inserting the connector!

The illustrations on this page show the associated elements,

each with a view of the contacts. The filled circles describe

the location of the coding pins, whereby, of course, it is absolutely

necessary to observe the form and direction of the

screen. The letters A...H and a...h only show which pins enter

into which holes when the connector is inserted properly

according to position.

max. 70 connections

The code pictures are numbered. Number and code always

belong together even if the order or location on the hood was

selected to a particular requirement.

Hood and connector should always be identified with a

corresponding number so that finding the correct location is

made easier. As a result, the technician is spared of many

unsuccessful attempts!

To guarantee the use of the 70 connecting possibilities it

must be certain that always 4 pins in one level are in use.

If only 6 or less connections of the same size are available,

one can do without equipping the hood with a second coding

block (E-F-G-H). It will then only be equipped with block

A-B-C-D and a-b-c-d with each 2 pins per connector and hood.

Hoods Pins Hoods Pins Hoods Pins Hoods Pins

Uncontrolled Copy

max. 6

connections

Hoods

Pins

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 21


Series

MSF

Universal metal hood with 5 cable entries for connectors according to DIN 41612 types E,F,H

EMI / RFI shielding all metal hoods made from die-cast zinc

Hoods can be mounted on a 19“ rack with or without

special front plates

Available accessories permit the installation of hand

levers, coding elements and adaptors for E+F connectors

Cable entries for 3x CF100 and 2x CF200 crimp flanges

Cabel entries with double dove-tail grooves for low

impedance connections

Unused cable openings will be EMI / RFI protected

by insertion of metal plugs

For the best EMI / RFI protection, high cable retention

force and rapid assembly, Inotec recommends its

outstanding crimp flange system

As an alternative, cable retention may be performed by

available die-cast zinc cable clamps

1) Hood

2) Hood cover

3) Cover screw

4) Screw for grounding post

5) Hexagonal jackscrew

6) Spring washer

7) Grounding contact

8) Metal plug DBS100 (small)

to close unused cable entries

9) Metal plug DBS200 (large)

to close unused cable entries

10) Crimp flange (small) CF100

11) Crimp flange (large) CF200

12) Crimp ferrule

13) Connector positioning adapter (left+right) type DTE-1

14) Connector positioning adapter (left+right) type DTE-2

15) Connector positioning adapter (left+right) type DTF-1

16) Connector positioning adapter (left+right) type DTF-1

Fixing elements for PC boards

17) Mounting elements upper part (left+right) for hand lever

18) Mounting elements lower part (left+right) for hand lever

19) Hand lever lower part (left+right)

20) Hand lever upper part (left+right)

21,22) Coding elements

– See following pages for details –

Uncontrolled Copy

22

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

MSF

Metal hoods for connectors according to DIN 41612 types E, F+H with 5 cable entries

DG48MSF-1

Hood with cable entries for 3x CF100 and 2x CF200 crimp flanges

Hood assembly consists of:

1 Metal hood with cover

2 Hexagonal jackscrews M2.5x18 with spring washers

2 Screws M2,5x4,5* for grounding posts

4 Cover screws M2,5x7*

*Screws with self forming threads

This version is used when the slide in unit with its PC board

and mating connector is mounted on a front plate. The front

plate should be equipped with grounding contacts, making

contact to the next front plate installed in the rack.

The cover of the hood is longer than the body and makes

contact to the grounding contacts of the neighbour front plate

when mating.

To adjust the connector position inside the hood to the mating

depth of the opposite connector, 2 different adapter elements

are available.

Accessories

For the installation of the connector types E,F,H according

to DIN 41612, certain plastic adapter elements are available.

See page 27+28 for detailed types and part numbers of

accessories. Please see following picture for applications

and use of coding system and PCB fixing levers.

Dimensions in mm

Technical information and applications

DG48MSF-1 and -2 Coding system and PC board fixing levers

Uncontrolled Copy

Explanation of accessories

Hexagonal coding elements to be

installed and positioned in the hood.

Corresponding hexagonal coding

elements installed and positioned in

the levers.

See page 27 / 28 and page 38ff.

for more information and part numbers

of accessories.

Lever for PC board

extraction

Part No. LPH-1

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 23


Series

MSF

Special metal hood for connector type F according to DIN 41612 with 5 cable entries

DG48MSF-91

Hood with cable entries for 3x CF100 and 2x CF200 crimp flanges

Hood assembly consists of:

1 Metal hood with cover

2 Hexagonal jackscrews M3x16.5 with spring washers

2 Screws M2,5x4,5* for grounding posts

4 Cover screws M2,5x7*

*Screws with self forming threads

Hood made for special applications and to be used with

the F type connector in one position only. The distance of

the jack screws is compared to the other versions 17.9mm

less and can therefore not be fastenend within the 19“ rack

dimensions. The hood can be equipped with a 4 pin coding

system to avoid incorrect matings. The front side of the hood

is adjoining the front panel.

Accessories

See page 27 and 28 for detailed types and part numbers of

accessories. For applications and coding system please see

picture below.

Dimensions in mm

Technical information and applications

DG48MSF-91 mounting brackets with coding system

Explanation

Uncontrolled Copy

The brackets are fastened to the front

plate with two screws. The upper sides

have M3 threads for hood fastening

and 2 bores accepting coding pins which

correspond with identical bores in the

hood.

See page 27 / 28 and page 38 for

more information and part numbers of

accessories.

Mounting brackets

Part No. BEB-91

26 PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Accessories MSF

DIN 41612

Mounting bracket Mounting bracket for hood type Dimensions in mm

DG48MSF-91 with bores to accept coding pins

Part No. BEB-91

2 brackets for front plate mounting

to be used for fastening hood type

DG48MSF-91 with the possibility

of using 4 coding pins. (KOS-91).

See page 26 for application information.

Coding pin Coding pin to be inserted in hood Dimensions in mm

DG48MSF-91 and mounting bracket BEB-91

Part No. KOS-91

PC board lever

Lever set for PC board extraction and installation of coding elements

The lever has to be mounted on the PC

board and helps to lift the board up

to disengage it from the mating connector

on the back panel and is also designed

to accomodate the coding elements.

See page 23 for application information.

Part No. LPH-1

Uncontrolled Copy

Coding pins can be inserted into the hood

DG48MSF-91 and into the corresponding

position of the mounting brackets.

See page 26 for application information.

The PC board lever comes as an installation

kit with all necessary piece parts for one

board. Coding elements have to be ordered

separately.

See page 22 / 23 for application information.

Coding element

Hexagonal coding elements to be used with PC board lever

Hexagonal coding element to be used

with hood DG48MSF-1, DG48MSF-2

and DG48MSF-3.

One pair has to be installed in the

pre-determined position of the hood and the

other pair inside the PC board lever.

Part No. KOE-1

1 set consists of 4 coding elements

See page 22 / 23 for application information.

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 27


Accessories MSF

DIN 41612

Female connector F48 For crimp contacts Dimensions in mm

Part No.

FC48S

For female crimp contacts FCCxS-200

Female contacts on reel Crimp contacts Dimensions in mm

Part No.

FCC1S-200

AWG 26-20

1 reel = 2500 contacts

class 2

Female contacts on reel Crimp contacts Dimensions in mm

Adapter DTE-x

L

R

Part No.

FCC2S-200

AWG 20-16

Connector positioning adapter set for connector types E

Adapter set for E type connectors

according to DIN 41612 to be used in hood

no. DG48MSF-1 or -3

See page 22 for application information.

1 reel = 2500 contacts

class 2

Uncontrolled Copy

Part No. DTE-1

1 set (left and right)

L

R

Adapter set for E type connectors

according to DIN 41612 to be used in hood

no. DG48MSF-2

See page 22 for application information.

Part No. DTE-2

1 set (left and right)

Adapter DTF-x

Connector positioning adapter set for connector types F+H

L

R

Adapter set for F+H type connectors

according to DIN 41612 to be used in hood

no. DG48MSF-1 or -3

See page 22 for application information.

Part No. DTF-1

1 set (left and right)

L

R

Adapter set for F+H type connectors

according to DIN 41612 to be used in hood

no. DG48MSF-2

See page 22 for application information.

Part No. DTF-2

1 set (left and right)

28 PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Order Code

For hoods with connectors (E, F and H according to DIN 41612)

For the utilization of E type connector according to DIN 41612 in 19” system

1. How to find the correct hood:

A) Will you place the hood onto a front plate?

Yes

u

Part No. DG48MSF-1 or DG48MSF-3

B) Does the front plate have grounding contacts?

Yes

u

Part No. DG48MSF-1

u

No

Part No. DG48MSF-2

u

No

Part No. DG48MSF-3

2. This is how you can find additional accessories to order:

A) Would you like to mount the hood together with the E type connector onto a slide in unit?

Yes

No

u

Please order the following

accessories if this

hood is used

DG48MSF-1: Part No. DTE-1 and LPH-1

DG48MSF-2: Part No. DTE-2 and LPH-1

DG48MSF-3: Part No. DTE-1 and LPH-1

B) Do you require coding?

Yes

u

Part No. KOE-1

u

Please order the following

accessories if this

hood is used

DG48MSF-1: Part No. DTE-1

DG48MSF-2: Part No. DTE-2

DG48MSF-3: Part No. DTE-1

For the utilization of an F or H type connector according to DIN 41612 in 19” system

1. How to find the correct hood:

A) Will you place the hood onto a front plate?

Yes

u

Part No. DG48MSF-1 or DG48MSF-3

B) Does the front plate have grounding contacts?

Yes

u

Part No. DG48MSF-1

u

No

No

Part No. DG48MSF-2

u

No

Part No. DG48MSF-3

2. This is how you can find additional accessories to order:

A) Would you like to mount the hood together with the F or H type connector onto a slide in unit?

Yes

No

u

Please order the following

accessories if this

hood is used

Uncontrolled Copy

u

Please order the following

accessories if this

hood is used

DG48MSF-1: Part No. DTF-1 and LPH-1

DG48MSF-2: Part No. DTF-2 and LPH-1

DG48MSF-3: Part No. DTF-1 and LPH-1

B) Do you require coding?

Yes

u

Part No. KOE-1

DG48MSF-1: Part No. DTF-1

DG48MSF-2: Part No. DTF-2

DG48MSF-3: Part No. DTF-1

No

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 29


Accessories for circular connectors

Crimp flange system for circular connectors

Optimum protection against unwanted radiation

Simple and fast assembly

360° contact of the cable screen to the cable gland

Electrical connection integrity and high retention force

capability achieved in one operation

Ensures long term reliability under vibration conditions

Achieves extremely low contact resistance between

the cable screen and the connector

To achieve best EMI / RFI shielding for MS and other circular

connectors Inotec has developed a crimp flange adapter

system and back shells for different connector sizes and

specifications.

The crimp flange system has been originated and developed

by Inotec for EMI / RFI shielding metal hoods for connectors

and is one of the best and most reliable systems available.

For the first time this system can now be used for a wide range

of circular connectors.

Material:

Aluminium alloy

Uncontrolled Copy

Surface according to customer requirements.

The crimp flange system is available for circular connectors

according to MIL-C-5015, MIL-C-26482 and MIL-C-38999.

For more information, please contact factory.

30

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Accessories for circular connectors

Crimp flange system for circular connectors

Uncontrolled Copy

Example

Assembly consists of:

1 Back shell

1 Geared spacer

1 Crimp flange adapter

2 Sealing ring

Crimp ferrule CH-x/x to be ordered separately

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 31


Series

KD

EMC cable gland

Optimum protection against unwanted radiation

Simple and fast assembly

360° contact of the cable screen to the cable gland

Electrical connection integrity and high retention force

capability achieved in one operation

Ensures long term reliability under vibration conditions

Achieves extremely low contact resistance between

the cable screen and the connector

IP67

Only 3 parts

Lower diameter compared to other systems

and therefore high packing density

KD114-x/x

KD116-x/x

Cable gland M14

Cable gland M16

Assembly consists of:

1 Cable gland M14x1,5 including crimp flange x/x

1 Gasket

Part No. KD114-x/x

Accessories to be ordered separately:

Nut

Part No. KD114-M14

Lock washer Part No. KD114-S14

Crimp ferrule Part No. CH-x/x

x/x denotes d1/d2 (determined by Inotec according

to customer cable)

Dimensions in mm

Assembly consists of:

1 Cable gland M16x1,5 including crimp flange x/x

1 Gasket

Part No. KD116-x/x

Uncontrolled Copy

Accessories to be ordered separately:

Nut

Part No. KD116-M16

Lock washer Part No. KD116-S16

Crimp ferrule Part No. CH-x/x

x/x denotes d1/d2 (determined by Inotec according

to customer cable)

Dimensions in mm

KD220-x/x

Cable gland M20

Assembly consists of:

1 Cable gland M20x1,5 including crimp flange x/x

1 Gasket

Part No. KD220-x/x

Accessories to be ordered separately:

Nut

Part No. KD220-M20

Lock washer Part No. KD220-S20

Crimp ferrule Part No. CH-x/x

x/x denotes d1/d2 (determined by Inotec according

to customer cable)

Dimensions in mm

32

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Series

KD

EMC cable gland

Technical information and applications

Time saving is an important factor in the cost of cable assembly.

With our system, the simple and stable design enables

rational assembly and exceptional technical efficiency.

Different thread sizes allow for a greater packing density,

when compared with other existing systems. Additional sizes

can be offered to specific customer’s requirements.

The user will order the cable gland in the required crimp

flange size, depending on the cable to be used. Inotec will

define the data and processing requirements to be followed

in a data sheet created on receipt of a cable sample.

This service guarantees for the user a high and utmost reliable

product.

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 33


Connectors

Subminiatur-D Connectors

Introduction

The Inotec subminiature D-connector series complies with

DIN 41652 and corresponds largely with MIL-C-24308 and

can be plugged in to and is interchangeable with other subminiature

D-connectors. The Inotec quality management

program according to DIN / ISO 9001 guarantees the user

optimal quality and reliability of the products.

Please note that this catalogue only contains the standard

design. In addition, we also produce according to customer

specifications. Please send us your inquiry if you cannot find

your applicable connector here.

The Inotec subminiature D-connector series consists of

5 sizes standardized according to DIN 41652 with 9 through

50 poles contact designs. They can be plugged in to and are

interchangeable with subminiature D-connectors from other

manufacturers.

The trapezoidal metal shell serves to shield from electromagnetic

emitted radio interferences. This metal shell is provided

with dimples that ensures a secure material connection.

The contact elements can be delivered in different designs

depending on the intended use. The selected contact materials

ensure a high contact security with low transition resistance.

Technical properties

Numbers of poles 9, 15, 25, 37, 50

Rated current 5 Amp. 1)

Operating voltage

125V ∼ according to VDE 0110 size A

Contact resistance

< 3mΩ

Test voltage

1000 V, eff

Air gap and creepage distance > 1mm

Insulation resistance > 10 11 Ω

Temperature range

-55°C to +125°C

Mating cycles > 500 / 200 / 50 2)

Insulator

PBTP, 2-pieces

Flammability self-extinguishing according to UL 94 V-0

Shell

Steel, Sn over Ni

Contacts

turned, Cu-alloy

Plating

Au over Ni

1) According to the electric load curve at the opposite

2) According to the quality classes of DIN 41652

3) The specifications refer to test items with hand-soldered connection.

Connectors with other connection types can obtain deviating values.

Operating current (A)

6

5

4

3

2

1

0

Derating curve 3)

0 20 40 60 80 100 120 140°C

Ambient temperature

Uncontrolled Copy

Dimensions in mm

Design A B C D E F G H J K max.

09 P 30,8 16,9 25,0 8,4 12,5 11,0 6,0 19,3 10,9 1,5

09 S 30,8 16,3 25,0 7,9 12,5 11,2 6,2 19,3 10,9 1,5

15 P 39,1 25,2 33,3 8,4 12,5 11,0 6,0 27,5 10,9 1,5

15 S 39,1 24,6 33,3 7,9 12,5 11,2 6,2 27,5 10,9 1,5

25 P 53,0 39,0 47,0 8,4 12,5 11,0 5,9 41,3 10,9 1,5

25 S 53,0 38,4 47,0 7,9 12,5 11,2 6,2 41,3 10,9 1,5

37 P 69,3 55,4 63,5 8,4 12,5 11,0 5,9 57,7 10,9 1,5

37 S 69,3 54,8 63,5 7,9 12,5 11,2 6,2 57,7 10,9 1,5

50 P 67,0 52,8 61,1 11,1 15,4 11,0 5,9 55,3 13,6 1,5

50 S 67,0 52,4 61,1 10,7 15,4 11,2 6,2 55,3 13,6 1,5

34

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Connectors

D-Sub connectors

Crimp connectors Male Dimensions in mm for 9 way

Part No. Type 1 Type 2

Type 1 Type 2

Type 1 Type 2

09way DC09P-G* DCE09P-G*

15way DC15P-G* DCE15P-G*

25way DC25P-G*

37way DC37P-G*

50way DC50P-G*

Contacts to be ordered separately

*Shells with dimples

Type 2 available without dimples:

Part No. DCxxP

(xx denotes size 09-50)

Crimp connectors Female Dimensions in mm for 9 way

Type 1 Type 2

Type 1 Type 2

Crimp contacts Male Dimensions in mm

Part No. Type 1 Type 2

09way DC09S-G* DC09S

15way DC15S-G* DC15S

25way DC25S-G* DC25S

37way DC37S-G* DC37S

50way DC50S-G* DC50S

Contacts to be ordered separately

*Shells with dimples

Part No.

Uncontrolled Copy

DCC2P4 AWG 24-20

(0,2-0,56mm 2 )

DCC2P5 AWG 18

(0,75mm 2 )

Precision turned crimp contacts

with 1.3u gold plating for quality class 1.

Crimp contacts Female Dimensions in mm

Part No.

DCC2S4 AWG 24-20

(0,2-0,56mm 2 )

DCC2S5 AWG 18

(0,75mm 2 )

Precision turned crimp contacts made

of Cu-bronze with stainless steel shroud

to protect the contact area. Crimp area

annealed.

1.3u gold plating for quality class 1.

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.

35


Accessories

Slide lock DVxxGx Manually operated slide locks Dimensions in mm

Part No.

Dimensions

A B width

DV09Gx 35,7 25,0 11,0

DV15Gx 44,0 33,3 11,0

DV25Gx 57,7 47,0 11,0

DV37Gx 74,2 63,5 11,0

DV50Gx 73,8 61,1 13,6

Assembly consists of:

Part No. ending G1 = slide lock only

Part No. ending G2 = slide lock, 2 special

threadforming screws 4-40 UNCx7,5

for connector and slide lock fastening

2 spring washers, 2 nuts 4-40 UNC

Lock bolt DV-B1/x Lock bolts for above slide locks Dimensions in mm

Part No.

Thread length

L

DV-B1/1 08,2

DV-B1/2 12,9

(other lengths upon request)

Female jackscrew DV-B2/x Hexagon female jackscrews Dimensions in mm

Uncontrolled Copy

Assembly consists of:

2 Special lock bolts with 4-40 UNC thread

2 Washers

2 Spring washers

2 Nuts 4-40 UNC

Part No.

Thread length

L

DV-B2/1 05,0

DV-B2/2 08,0

DV-B2/4 13,0

(other lengths upon request)

Assembly consists of:

2 Hexagonal female jackscrews 4-40 UNC

2 Washers

2 Spring washers

2 Nuts 4-40 UNC

Female jackscrew DV-B3/1-2 Female jackscrew for connectors Dimensions in mm

installed behind the front panels

Part No.

DV-B3/1-2

Assembly consists of:

2 Female jackscrews, threads M3

2 Spring washers

2 Nuts M3 thread

This special female jackscrew is used with

the MSX hood series for connectors mounted

behind the front panels of approx. 2-2,5mm

thickness. The mounting holes have to be

according to the drawing. For other panel

thicknesses please contact factory.

36

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Accessories

Automatic slide lock EDxxVL Automatic “push on” slide locks Dimensions in mm

Part No.

Dimensions

A B width

ED09VL 37,0 25,0 15,2

ED15VL 45,0 33,3 15,2

ED25VL 60,0 47,0 15,2

ED37VL 76,7 63,5 15,2

ED50VL 73,7 61,1 18,0

Assembly consists of:

1 Slide lock

1 Blade spring

Lock tabs EDVL-Bx Lock tabs for above automatic slide locks Dimensions in mm

Part No.

Tensile tests with different locking types

Test 1:

Slide locks from competitor

Retention force: 0.287 kN

Test 2:

Inotec slide lock DV25Gx

Retention force: 0.435 kN

EDVL-B1-P for 9 to 37 way connectors

EDVL-B2 for 50 way connectors

Assembly consists of:

2 Lock tabs

( ) = EDVL-B2

Uncontrolled Copy

Test 3:

Inotec slide lock ED25VL

Retention force: 0.448 kN

Force kN

Test 4:

Inotec jackscrew locking system of series MS

Retention force: 4.392 kN

The specified values are average values

that were determined with 25 way D-Sub versions.

Deformation mm

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 37


Accessories

Crimp flange CF100-x/x*

For 9 to 48 way hoods

Part No.

CF100-x/x*

*x/x denotes D1/D2

(inside/outside dia. in mm,

D1 max. 9mm dia.)

See page 48 for technical information

and page 42 for crimp tools

Crimp flange CF200-x/x*

For 48 / 50 / 104 way hoods

Part No.

Crimp flange CF300-x/x*

Crimp flange CF400-x/x*

Special crimp flange for 9 to 48 way hoods

For DG09MSBS

CF200-x/x*

*x/x denotes D1/D2

(inside/outside dia. in mm,

D1 max. 11mm dia.)

See page 48 for technical information

and page 42 for crimp tools

Part No.

CF300-x/x*

*x/x denotes D1/D2

(inside/outside dia. in mm,

D1 max. 10,5mm dia.)

See page 48 for technical information

and page 42 for crimp tools

Part No.

Uncontrolled Copy

CF400-x/x*

*x/x denotes D1/D2

(inside/outside dia. in mm,

D1 max. 6,5mm dia.)

See page 48 for technical information

and page 42 for crimp tools

Crimp ferrule CH-x/x*

Crimp ferrules

Part No.

CH-x/x*

*x/x denotes D1/D2

(inside/outside dia. in mm)

See page 48 for technical information

and page 42 for crimp tools

38

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Accessories

Cable clamp DKS100 Standard cable clamp for 9 to 48 way hoods Dimensions in mm

Part No.

DKS100

Assembly consists of:

2 Cable clamps

2 Screws M2,5x10 with self forming threads

2 sections with different distance to accept

cable outside dia. of appr. 3 to 12mm

Cable clamp DKS200 Standard cable clamp for 48/50/104 way hoods Dimensions in mm

Part No.

DKS200

Cable clamp DKS107 Standard cable clamp for 9 to 48 way hoods Dimensions in mm

Part No.

DKS107

Uncontrolled Copy

Assembly consists of:

2 Cable clamps

2 Screws M2,5x16 with self forming threads

2 sections with different distance to accept

cable outside dia. of appr. 5 to 14mm

Assembly consists of:

2 Cable clamps

2 screws M2,5x10 with self forming threads

Accepts max. 3 cables with outside

dia. 6 to 8mm

Cable clamp DKS207 Standard cable clamp for 48/50/104 way hoods Dimensions in mm

Part No.

DKS207

Assembly consists of:

2 Cable clamps

2 screws M2,5x10 with self forming threads

Accepts max. 3 cables with outside

dia. 6 to 11mm

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 39


Accessories

Metal plug DBS100

Metal plug to close unused cable openings. For 9 to 48 way hoods

Part No.

DBS100

Metal plugs are supplied with the metal hoods

in corresponding quantities.

They may also be ordered as separate items

for applications not requiring a cable entry

or for installation of additional components

(coaxial connectors, LED’s, switches etc.)

Metal plug DBS200

Metal plug DBS400

Metal plug to close unused cable openings. For 48 / 50 / 104 way hoods

Part No.

DBS200

Metal plug to close unused cable openings. For DG09MSBS hoods

Metal plugs are supplied with the metal hoods

in corresponding quantities.

They may also be ordered as separate items

for applications not requiring a cable entry

or for installation of additional components

(coaxial connectors, LED’s, switches etc.)

Part No.

DBS400

Uncontrolled Copy

Metal plugs are supplied with the metal hoods

in corresponding quantities.

They may also be ordered as separate items

for applications not requiring a cable entry

or for installation of additional components

(coaxial connectors, LED’s, switches etc.)

Metal plug DBS100-UGxxx

Metal plug with BNC connector for 9 to 48 way hoods

Part No.

DBS100-UG1094/U (example)

Metal plug with integrated BNC connector

for EMI / RFI shielding application.

Contact factory for other types.

40

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Accessories

Metal plate DGAxxM30BP Metal plates with bores for series M30 Dimensions in mm

Part No. A B

DGA09M30BP 32,4 25,0

DGA15M30BP 40,7 33,3

The metal plates are used with the DGA

hood series to close the opening if only one

connector is used. The plates can be used

for installing additional components i.e.

LED’s, switches, etc.

Metal plate DGAxxM30BPO Metal plates without bores for series M30 Dimensions in mm

Part No.

DGA09M30BPO 32,4

DGA15M30BPO 40,7

Metal plate DGAxxBP Metal plates for series M11 Dimensions in mm

The metal plates are used with the DGA

hood series to close the opening if only one

connector is used. The plates can be used

for installing additional components i.e.

LED’s, switches, etc.

Part No.

Uncontrolled Copy

DGA09BP for 09 way hood 25,0

DGA15BP for 15 way hood 33,3

DGA25BP for 25 way hood 47,0

DGA37BP for 37 way hood 63,5

The metal plates are used with the DGA

hood series to close the opening if only one

connector is used. The plates can be used

for installing additional components i.e.

LED’s, switches, etc.

A

A

PC board DGAxxL1

PC boards for series M11

Part No.

DGA09L1 for 09 way D-Sub connectors

DGA15L1 for 15 way D-Sub connectors

DGA25L1 for 25 way D-Sub connectors

DGA37L1 for 37 way D-Sub connectors

PC boards* connect 1:1 male and female

D-SUB connectors, having solder pads for

cable connection.

*Contact factory for other types

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.

41


Tools

IHP500

Hand operated toggle lever table press

Part No. IHP500

Technical data

Pressure force KN 5,0

Working stroke mm 40

Adj. working height mm 45-220

Spindle dia. mm 20

Spindle bore mm 10H7x25

Clearence mm 63

Working surface mm 110x60

T-slot DIN 650 mm 10

Base dim. mm 110x160

Weight kg 8,5

Toggle lever table press of rigid construction for multiple use

and sufficient pressure for crimp flanges. Toggle presses are

employed where the full force of a press is only needed at the

end of a working stroke.

Crimp dies for table press

Part No. DCBxxx(T)

*xxx denotes the type and hexagonal dimension in mm. The dies

are available within the range of the Inotec crimp ferrules in 0,5mm

steps.

Uncontrolled Copy

42

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Tools

HZ100

Special hand hold crimp tool

Part No. HZ100

Crimp dies for

hand crimp tool.

Part No. CB-xxx*(T)

Precision one hand operated crimp tool with linear stroke.

All parts made of high tensile steel and particular parts are

specially hardened for long life. The upper die swings out

and accepts crimp diameters which would normaly require a

much larger capacity crimp tool, having a larger opening, and

requiring the use of both hands to complete an operation.

*xxx denotes the type and hexagonal dimension in mm.

The dies are available within the range of the Inotec crimp

ferrules in 0,5mm steps.

HZ200

Special hand hold crimp tool

Part No. HZ200

Precision one hand operated tool similar to HZ100 but for

hexagonal dimensions up to 20mm.

Uncontrolled Copy

*xxx denotes the type and hexagonal dimension in mm.

The dies are available within the range of the Inotec crimp

ferrules in 0,5mm steps.

Crimp dies for

hand crimp tool.

Part No. CB2-xxx*(T)

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.

43


Tools

Special tool HZ148

Precision crimp tool for single contacts with BO crimp

Part No.

HZ148

for Crimp range 0,14-0,5mm 2

Hardened special steel for long life

Parallel together moving crimp dies for secure crimp

connections

Handy tool with low operating crimp force

High cable retention force due to subdivided

crimp ranges

Special tool HZ248

B-crimping

Grinding pattern of crimping

by a crimping tool HZ148.

Precision crimp tool for single contacts with BO crimp

Order no.

HZ248

for Crimp range 0,5-1,5mm 2

Hardened special steel for long life

Parallel together moving crimp dies for secure crimp

connections

Handy tool with low operating crimp force

High cable retention force due to subdivided

crimp ranges

Uncontrolled Copy

44

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Tools

Crimping tool

Crimping tool for turned contacts

Part No.

Crimp tool:

Positioner:

M22520/2-01

M22520/2-08

8-notch crimping tool in MIL-design with adjustable depth

of indentation.

Insertion and removal tool Insert and removing tool

Part No. DCT100

Insertion and removal tool for Standard D-Sub crimp contacts.

Mounting device

for Coding elements

Part No.

KOM09

KOM15

KOM25

KOM37

See page 20 / 21 for technical information.

Uncontrolled Copy

Hand tool

for Coding pins

Part No.

KOD100

See page 20 / 21 for technical information.

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 45


Tools

Insertion tool CFE

Crimp flange insertion tool

This very handy tool for inserting crimp flanges has been

designed by Inotec to ease the handling, save time and

simplify the assembling method.

The application is a follow:

Feed the conductors through the crimp flange and insert the

crimp flange into the grooves of the insertion tool CFE. Push

the crimp flange underneath the cable screen and sheath

until it reaches its end position and take crimp flange out of

the insertion tool.

Part No.

Part No.

Part No.

CFE100 (to be used for crimp flange CF100

and CF300)

CFE200 (to be used for crimp flange CF200)

CFE400 (to be used for crimp flange CF400)

Other tools upon request.

Scissors

Scissors for cutting cable screen

Part No.

CS01

This convenient scissors with its bent cutting edges made

out of hardened steel is ideal for cutting cable screen.

Uncontrolled Copy

Screw driver

Turn screw with hexagon ball end

Order no.

SDK01

(Width across flats 2,5)

This turn screw is very well suited for slanted positioning (up

to 30°) onto the socket screw of the hoods.

46

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Tools

Tool box

For several tools

Part No.

WK100

Inner dimensions: 326x222x78

Outer dimensions: 335x275x88

Dimensions in mm

could be equipped with

1 Hand tool HZ100

2 Crimp dies CB-xxx(T)

3 Crimp dies CB-xxx(T)

4 Accessories for HZ100

5 Scissors CS01

6 Insertion tool CFExxx

7 Box for accessories

8 Box for accessories

9 Cable cutter

Uncontrolled Copy

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 47


Technical information

Cable assembly

EMI / RFI shielding metal hoods: Cable assembly

with Inotec crimp flange and ferrule

2. The cable input point should have satisfactory

RF-sealing without any open electrical windows.

General: In order to minimize destructive EMI / RFI radiation

on transmission lines, it is essential to have suitable safeguards.

To achieve this objective, well protected cables with

good screening properties and proper EMI / RFI shielding

metal hoods on the cable ends are essential.

The connection of the cable to the metal hood must meet

several important criteria:

1. A low impedance connection of the cable screen

to the backshell remaining constant over a long period

of time and under mechanical strain.

Assembly Instructions:

Cut the cable sheath to the correct length.

Fold the cable screen backwards over the cable sheath and

cut it off in such a way, that approximately 1-2mm are left over.

Slide the crimp ferrule backwards over the cable sheath.

Feed the conductors through the crimp flange.

Push the crimp flange underneath the cable screen and

sheath until it reaches its end position.

Slide the crimp ferrule forward to the correct position.

Insert ferrule into hexagonal crimp dies, specified by Inotec

and press tool firmly together.

3. A strain relief with high mechanical retention force to be

able to function during rough use of the cable.

4. The entire work process has to be of high quality,

economical and simple to carry out.

To fulfil all these requirements, Inotec developed for their

metal hoods the Inotec crimp flange system which connects

the cable screen 360° around the crimp flange and also

achieves the mechanical strain relief in one operation. To

assemble crimp parts and cable, please follow the instructions

below:

Uncontrolled Copy

The assembled crimp flange is then pressed into the corresponding

groove provided in the metal hood. The result is

a high retention force, very low resistance and a reliable

connection of the cable screen to the metal hood without any

electrical windows.

The prerequisites for an optimum connection are the coordination

of crimp flange, crimp ferrule and crimp dies for the

cable that is used by the customer. The decisive factor in

determining the dimensions of the crimp flange is the diameter

of the conductor bundle and not the external diameter of

the cable sheath. The max. inner diameter limit for the crimp

flanges is as follows: CF100: 9mm, CF200: 11mm, CF300:

10.5mm

On receipt of a cable sample from the customer, Inotec will

determine all necessary dimensions and furnish this data and

instructions for the application in a technical information sheet.

This free service guarantees the user trouble-free assembly

and ensures good product reliability.

Small incremental diameters of crimp flanges, crimp ferrules

and crimp tools are in stock and assure a speedy delivery

and service to our customers.

48

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.


Technical information

Test set up for screening efficiency according to DIN 47250-6

Vector

Network

Analyser

Port 1

Port 2

Indicator line (l=7m)

Measuring line

Test object

Indicator line (l=7m)

Terminating

resistance

Absorption

pick up

Uncontrolled Copy

Legend:

No. 1: Shielded Cable only

No. 2: Inotec metal hood DG09MSX

No. 3: Inotec metal hood DG09MSBS

No. 4: Best available competitor metal hood

No. 5: Metalized plastic hood

No. 6: Plastic hood with metal inlay

13.04.2005

General notes

We reserve the right for technical changes that we consider advisable for reasons of quality improvement, expanded utilization possibilities or production reasons without prior

announcement. We are not liable for replacement deliveries of previous designs. The technical values that are specified in this catalogue only refer to the corresponding components

and are no assurance of features in user devices, the design of which is not know to us. The verification of the appropriate utilization is up to the user.

PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 49


EMI / RFI shielding

EMI / RFI shielding interconnection systems

interconnection systems

Uncontrolled Copy

Inotec electronics GmbH

Im Vorderen Burgfeld 19-21, D-74348 Lauffen a.N.

Phone +49 (7133) 9800-0, Fax +49 (7133) 9800-25

www.inotec-electronics.com, info@inotec-electronics.com

More magazines by this user
Similar magazines