Aircraft Maintenance Tools - Equipment Components - Services www.aerotecs.com

EN
Aircraft Maintenance Tools - Equipment
Components - Services
www.aerotecs.com

TESTING, TOOLS & GSE
In the aviation industry, precision and support are of vital importance. This is why Aerotecs distributes and maintains a selective range
of the most advanced measuring devices.
All our manufacturers are international market leaders with many years of experience and proven reliability. This also applies to the
suppliers of tools and ground support equipment that Aerotecs provides, such as power units, tugs, inspection equipment and specialized
hand tools.
Our Mission is to provide you, our valued customer, with the highest quality - “State of the Art” - products & services that are supported
with a superior level of commitment.
OUR EXPERTISE
• Air Data Test Sets
• Aircraft Tugs
• Boroscope Equipment
• Electrical Bonding Testers
• Electronic Tap Hammer
• Engine Vibration Analysis Kits
• Fiberscopes
• Ground Power Units
• Portable Hangar Cooling Units
• Hot Bonding Composite Repair Kits
• Master Sight Compass
• Pitot Static Test Adapters
• Propeller and Fan Balancing Kits
• Radome Moisture Meters
• Rotor Track and Balancing Kits
• Start Batteries
• Weighing Scales and Load Cells

“
I would like to take the opportunity
to say thank you for all the help and
support Aerotecs have provided to
Eastern Airways in order to develop
a propeller balancing solution for
the Saab 2000 and Jetstream 41
Aircraft.
”
Saab Fleet Technical Manager
Eastern Airways
TESTING & TOOLS
Aerotecs distributes and maintains a selective range of the most advanced measuring devices.
All our manufacturers are international market leaders with many years of experience and
proven reliability.
Amongst our products you will fi nd advanced propeller, fan, rotor track and balancing equipment
together with a full range of air-data test sets and pitot test adapters. Our Master Sight Compass
facilitates a very easy compass swing.
For your composite repairs, our hot bonders are portable, and economical but most of all easy
to operate and powerful.
• Balancing and Vibration Analysis
• Electrical Bonding Systems
• Master Sight Compass
• Pitot Static Test Accessories
• Pitot Static Testers
• Radome Moisture Meters
• Tool Cabinets
• Hot Bonding Composite Repair Kits
ACES ProBalancer 2020HR + TraX WichiTech HB2 Composite Hot Bonder DFW Master Sight Compass TEGAM R1L-BR1 Helicopter bond meter DFW Static Test Set DPST-9200A-RSVM

“
Red Box International is proud to
be in partnership with Aerotecs NV.
In representing our ground support
equipment, Aerotecs mirror our
own ethos of providing fi rst class
customer support and after sales
care, matching the most suitable
Red Box product to the customer’s
specifi c requirements.
CEO
Red Box International
”
GROUND SUPPORT EQUIPMENT & TOOLS
Our tugs are designed by people who understand the importance of being able to glide an aircraft
around a hangar or to pull them up onto our weighing scales and around an airfi eld with absolute
accuracy.
With our fi ne and easy to operate boroscope’s your inspection times are reduced to a minimum
and if your hanger gets too hot in summer, why not cool it down with our portable hangar cooling
units.
The range of our power units are designed to offer every variation of power needed for aircraft.
We offer a full range of start units, continuous DC power supplies, combination units, transformer
rectifi er units and frequency converters.
• Aircraft Moving Equipment
• Ground Power Equipment
• Aircraft Weighing
• Portable Hangar Cooling Units
• Camera and Inspection
Electric and Gas Powered Tugs Aircraft Weighing Solutions Portable Aircraft Start Battery Lithium Portable Evaporative Coolers SnakeCam - Camera & Inspection Tool

“
The Aerotecs Team has helped
us numerous times by being
available over the phone for specifi c
troubleshooting and giving some
good tips and hints.
Manager Engine Maintenance
Aero-Dienst GmbH & Co. KG
”
CERTIFIED SERVICE CENTER
Aerotecs in Belgium has its own ISO 9001-2008 certifi ed and OEM authorized repair and
calibration facility.
In our own certifi ed maintenance and calibration center, we calibrate your measuring equipment
to the required standards.
Given our expertise and proximity, you can be sure that your equipment can be put back into
operation again within the shortest possible period of time.
If required, Aerotecs can also train your people in the most benefi cial use of the equipment.
ADVANTAGES
+ Certifi ed Service Center in Europe
+ Recalcenter with the latest “State of the Art” apparatus
+ Standard 72 hours turn-around time for calibrations
+ 48 hours turn-around time available upon request
+ Less Down time of your equipment
+ Support in Dutch, English, French and German
+ Fully trained Staff
+ European shipments (ex. less fees, administration...)
+ Shorter transportation times
+ Manufacturer approved - no risk for loss of warranty

“
My people have returned safe and
sound from your training course on
the ACES 4040, bursting we newly
gained knowledge on Vibration
Survey and Fan Balancing.
Both agree it was a very worthwhile
and informative course, and we look
forward to putting this new theory
into practice.
Deputy Engine Shop
Harrods Aviation
Manager”
Limited
TRAINING CENTER
The efficient use of your measuring equipment is crucial for the safety of both passengers and
crew. And its correct implementation also increases the efficiency of both your employees and
the equipment itself. This is why anyone using our measuring devices should be properly trained
to do so. Our practical instructors adapt to the needs of your company.
You are welcome to spend one or more days at our Aerotecs Training Center, unless you would
prefer us to provide the training on your premises.
Training sessions, including on-wing initiation can be organized at your facility. Refresher courses
or basic class room training can be organized in Aerotecs’ facility.
ADVANTAGES
+ Increase efficiency in using your measuring equipment
+ Faster set up times - Shorter Balancing/Analyzing jobs
+ Training Possibilities in Dutch, English, French and German
+ Classroom training or On-site training
+ On-wing initiations are possible on-site
+ Individual training certificates provided for each participant
+ Refresher courses
+ Fully trained Staff
+ Manufacturer approved Training Center

TAKING THE
CHALLENGE
TO PROVIDE
FIRST CLASS
SOLUTIONS
Aircraft Testing, Tools and Ground Support Equipment
Royerveld 22, 3740 Bilzen (Belgium)
+32 89 328 760 | +44 203 633 2341
sales@aerotecs.com | www.aerotecs.com
Aerotecs is the intermediary between the end user’s high comfort
requirements and the limited number of suppliers who are able
to respond to those demands. As a European representative and
distributor of a number of quality niche products, Aerotecs can
provide the ideal customized solution for any aircraft manufacturer
or repair service provider.
This applies to the most functional of components as well as
the more aesthetic and technical ones. Aerotecs speaks your
language. Literally, but also in terms of your needs, requirements
and wishes. We understand that you refuse to compromise
on quality. Precision. Trust. Expertise. Those are words in the
language that we understand.
Aerotecs is a unique point of contact for you. With only one contact
person to remember, all your worries are taken care of. We are
your help and support, always ready to assist you. And we will not
shy away from any challenge. Together we can ensure customer
satisfaction. Because that’s what really matters.
© Copyright 2015 Aerotecs NV