:DOTRIX MODULAR

More documents

Recommendations

Info

:Dotrix Modular in detail 1 | Substrate input 1 | Substrate input The jumbo unwind system of the :Dotrix Modular can handle rolls of up to 1.25 metres (49”) diameter, weighing up to 800 kg (1,750 pound) providing long uninterrupted print runs. The reel is lifted by two pneumatically driven arms that place the air mandrel into safety chucks. 2 | Flexo station 2 | Flexo station Flexographic printing station with short drying tower and UV curing system with chill roller. A flexo printing station before the SPICE, could serve as a coating/ priming pass if you wish to print on difficult standard substrates. This will greatly increase the print quality. Mounting a traditional flexo plate gives endless combinations of flexo white or spot and metallic colours with digital printing on top. An integrated flexo printing station after SPICE could lay down a top-finishing lacquer, giving your end product that high-quality finishing touch. 3 | SPICE printing unit The Single Pass Inkjet Colour Engine six or four colour is the digital heart of the engine, a stationary array of inkjet heads across the web up to 63 cm wide. This technology delivers an impressive print production of up to 1,209 square metres per hour. 3 | SPICE printing unit 4 | Flexo lamination or cold foil This can be used to laminate the substrate or, in conjunction with a standard flexo plate, to allow cold-foiling with a UV glue. 4 | Flexo lamination or cold foil
AGFA GRAPHICS 5 | Slitter Multiblade inline slitter device. 5 | Slitter 6 | Substrate output The :Dotrix Modular outputs to (jumbo) rolls which can be converted offline. 6 | Substrate Output 7 | Sheeting Tool This module provides a fully integrated sheet cutting solution running in line with the :Dotrix Modular. The base configuration is designed to cut variable length sheets that are delivered onto a shingle delivery table. Roll to roll functionality is available as an option. Other available options include slitting and automated high pile stacking. 7 | Sheeting Tool 8 | Mini Rewinder The sheeting tool is equipped with an 800 mm rewinder if roll to roll functionality is required. 8 | Mini Rewinder
Page 1: AGFA GRAPHICS :DOTRIX MODULAR Digit
Page 6 and 7: AGFA GRAPHICS :Dotrix Modular full
Page 8 and 9: AGFA GRAPHICS ➞ 5 | Roll-to-Sheet
Page 10 and 11: AGFA GRAPHICS Unlimited variability

:DOTRIX MODULAR

Create successful ePaper yourself

Delete template?

Save as template?