Product catalogue download... - ERNST HINRICHS GmbH

Duplicating silicone/ duplicating gel
���������฀������฀accord. DIN EN ISO 14356฀ �������� ® ฀��฀ �������� ® ฀ �������� ® ฀�����฀ �������� ® Speed
Mixing ratio: 1:1 1:1 1:1 1:1
Mixing under vakuum (sec.): 40 40 40 40
Working time (min.): >5 >5 >5 3-4
Curing time (min.): 30 - 45 30 - 45 30 - 45 10
Tensile strength (MPa): ca. 2,2 ca. 1,8 ca. 2,5 ca. 2,2
Elongation at break (%): 310 220 380 310
Tear strength (N/mm): 6,5 3,0 6,8 6,5
Shore A hardness: >24 16 - 18 22 - 24 24
Colour: pink grün smaragd gelb
30 ERNST
·
GOSLAR
GERMANY
HINRICHS
1888
·
Hinrisil ® hydro Addition-curing duplicating silicone, type 2
An addition-curing duplicating silicone with hydrophilic properties. Because of the hydrophilic
surface wetting agents are no longer required. Smooth model surface without surfactants.
Hinrisil ® hydro is suitable for the material-saving flaskless duplicating technique.
Suitable for automatic dispensers. Shore A hardness: 22-24
emerald
Available in:
2 x 1 kg bottle REF 107960
2 x 6 kg canister REF 107963
2 x 25 kg canister REF 107964
Hinrisil ® Speed Addition-curing duplicating silicone, type 2
A rapid- and addition-curing duplicating silicone, developed especially for express jobs using
adhesive duplicating tapes or flasks. Remove Hinrisil ® Speed from the duplicating mould
after just 10 minutes. Shore A hardness: 24
yellow
Available in:
2 x 1 kg bottle REF 107970
2 x 6 kg canister REF 107973
2 x 25 kg canister REF 107976
Hinrigel Duplicating gel, type 1
Hinrigel is a high-quality and reversibly duplicating mass. The fine-flowing duplicating gel is suitable
for investments and dental gypsum. Hinrigel has a high elasticity and volume stability.
green
Available in:
6 kg bucket REF 107953