SINAMICS G110 AC drives: The perfect start Externally compact … With just three frame sizes, the SINAMICS G110 inverter covers the power range from 0.12 to 3 kW (0.16 to 4 HP). The smallest frame size A has a heat sink which cools through self-convection. The flat plate variant is recommended especially where installation space is tight. ... internally flexible The up to four digital inputs of the SINAMICS G110 can be freely parameterized and set no limits when it comes to innovative application ideas. The inverter has an integrated DIP switch which allows the line frequency to be quickly changed over making it suitable for worldwide use. Simple installation and mounting – just like contactors The ready-to-connect SINAMICS G110 inverters have the same user-friendly connection terminals as for contactors and allow connections to be made without having to remove any covers. SINAMICS G110 can either be mounted on walls and panels or DIN-mounting rails. The optional removable BOP operator panel: Parameters once set can be simply copied from one inverter to the next! Commissioning – fast and uncomplicated Install, wire up, set the speed setpoint and you’re ready – commissioning a SINAMICS G110 really is simple. The parameters and the freely assignable inputs and outputs can be set in two ways: Either using the PC connection kit with the SINAMICS STARTER software tool. Or using the optional removable BOP operator panel. If several inverters have to be commissioned as series drives with the same parameters, settings which have been entered once are saved in the operator panel and can be transferred to every other inverter.
The technical highlights at a glance • High overload capacity has a favorable impact when dimensioning AC drives • Parameters can be quickly copied using the optional operator panel • 2-/3-wire control (steady/pulsed signals) for versatile control via digital inputs •The frequency setpoint can be input in many ways • Configurable voltage boost for higher dynamic response when starting and accelerating • Exemplary protection mechanisms (I 2 t) for the motor and inverter • Plant availability is increased using automatic restart after power failures or operational faults • The inverter can be switched to a rotating motor to minimize mechanical stress • Fast DC or Compound braking without external braking resistor • Motor holding brake function to control an external mechanical brake SINAMICS G110 – Technical data Voltage and power ranges Operating temperature range Control modes Inputs Outputs Link up to the automation 200–240 V | ±10 % | 1-ph. AC | 0.12 kW–3 kW | 0.16 to 4 HP –10 °C to +40 °C (+50 °C) V/f characteristic, multi-point characteristic (parameterizable V/f characteristic) 3 digital inputs Variant with analog input, can be used as 4th digital input Variant with RS485 interface 1 opto-coupler output The automation partner for LOGO! and SIMATIC S7-200