Catalog

More documents

Recommendations

Info

IEC Squirrel-Cage Motors Motors operating with frequency converters Self-ventilated motors with special insulation up to 690 V - Cast-iron series 1LG6 5 ■ Selection and ordering data Rated output at 50 Hz Frame size For Order No. supplement, see page 5/16. Operating values at rated output Order No. Price Weight Rated speed at 50 Hz Rated torque at 50 Hz Efficiency at 50 Hz 4/4-load Efficiency at 50 Hz 3/4-load Power factor at 50 Hz 4/4-load Power factor at 50 Hz 3/4-load Rated current at 690 V, 50 Hz For Order No. supplements for voltage and type of construction, see table below P rated FS n rated T rated η rated η rated cosϕ rated cosϕ rated I rated m kW rpm Nm % % A kg 2-pole, 3000 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 22 180 M 2955 71 93.7 94.1 0.88 0.85 22.5 1LG6 183-2PMqq 180 30 200 L 2960 97 93.1 93 0.89 0.85 30.5 1LG6 206-2PMqq 225 37 200 L 2960 119 93.6 93.5 0.89 0.86 37 1LG6 207-2PMqq 255 45 225 M 2965 145 94.4 94.6 0.89 0.87 45 1LG6 223-2PMqq 1) 330 55 250 M 2975 177 95 95 0.9 0.88 54 1LG6 253-2PMqq 1) 420 75 280 S 2975 241 95 95 0.89 0.87 74 1LG6 280-2PMqq 1) 530 90 280 M 2978 289 95.3 95.4 0.9 0.88 88 1LG6 283-2PMqq 1) 615 110 315 S 2982 352 95.5 95.4 0.91 0.89 106 1LG6 310-2PMqq 1) 790 132 315 M 2982 423 95.8 95.7 0.91 0.91 126 1LG6 313-2PMqq 1) 915 160 315 L 2982 512 96.2 96.2 0.92 0.91 152 1LG6 316-2PMqq 1) 1055 200 315 L 2982 641 96.2 96.2 0.93 0.92 188 1LG6 317-2PMqq 1) 1245 4-pole, 1500 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 18.5 180 M 1470 120 92.1 92.7 0.83 0.78 20 1LG6 183-4PMqq 155 22 180 L 1470 143 92.7 93 0.84 0.79 23.5 1LG6 186-4PMqq 180 30 200 L 1470 195 92.7 92.8 0.85 0.8 32 1LG6 207-4PMqq 225 37 225 S 1480 239 93.6 94 0.85 0.81 39 1LG6 220-4PMqq 1) 290 45 225 M 1480 290 94.1 94.3 0.85 0.82 47 1LG6 223-4PMqq 1) 330 55 250 M 1485 354 94.8 95 0.87 0.83 56 1LG6 253-4PMqq 1 ) 460 75 280 S 1485 482 94.7 94.8 0.87 0.84 76 1LG6 280-4PMqq 1) 575 90 280 M 1486 578 95.1 95.2 0.86 0.83 92 1LG6 283-4PMqq 1) 675 110 315 S 1488 706 95.6 95.7 0.87 0.84 110 1LG6 310-4PMqq 1) 810 132 315 M 1488 847 95.9 96 0.88 0.85 130 1LG6 313-4PMqq 1) 965 160 315 L 1490 1026 96.1 96.2 0.88 0.85 158 1LG6 316-4PMqq 1) 1105 200 315 L 1490 1282 96.1 96.2 0.88 0.86 198 1LG6 317-4PMqq 1) 1305 6-pole, 1000 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 15 180 L 975 147 90 90.8 0.81 0.77 17.2 1LG6 186-6PMqq 175 18.5 200 L 978 181 90.5 91.1 0.81 0.76 21 1LG6 206-6PMqq 210 22 200 L 978 215 91.4 92 0.82 0.78 24.5 1LG6 207-6PMqq 240 30 225 M 980 292 92.6 93.1 0.83 0.8 32.5 1LG6 223-6PMqq 1) 325 37 250 M 985 359 93.1 93.5 0.83 0.79 40 1LG6 253-6PMqq 1) 405 45 280 S 988 435 93.9 94.1 0.85 0.81 47 1LG6 280-6PMqq 1) 520 55 280 M 988 532 93.9 94.1 0.85 0.81 58 1LG6 283-6PMqq 1) 570 75 315 S 990 723 94.6 94.6 0.83 0.79 80 1LG6 310-6PMqq 1) 760 90 315 M 990 868 94.9 95 0.85 0.81 93 1LG6 313-6PMqq 1) 935 110 315 L 990 1061 95.2 95.3 0.85 0.82 114 1LG6 316-6PMqq 1) 1010 132 315 L 990 1273 95.4 95.4 0.85 0.82 136 1LG6 317-6PMqq 1) 1180 160 315 L 990 1543 95.3 95.4 0.86 0.82 164 1LG6 318-6PMqq 1) 1245 8-pole, 750 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 11 180 L 725 145 88.1 89 0.76 0.69 13.8 1LG6 186-8PMqq 165 15 200 L 725 198 88.2 88.7 0.8 0.73 17.8 1LG6 207-8PMqq 235 18.5 225 S 730 242 89.9 90.6 0.81 0.75 21.5 1LG6 220-8PMqq 1) 295 22 225 M 730 288 90.6 91.1 0.81 0.75 25 1LG6 223-8PMqq 1) 335 30 250 M 735 390 91.9 92.4 0.82 0.77 33.5 1LG6 253-8PMqq 1) 435 37 280 S 738 479 92.6 92.8 0.81 0.76 41.5 1LG6 280-8PMqq 1) 510 45 280 M 738 582 93.3 93.6 0.81 0.77 50 1LG6 283-8PMqq 1) 560 55 315 S 740 710 93.8 93.9 0.82 0.77 60 1LG6 310-8PMqq 1) 750 75 315 M 740 968 93.9 94.1 0.83 0.78 81 1LG6 313-8PMqq 1) 840 90 315 L 740 1161 94.2 94.6 0.84 0.8 95 1LG6 316-8PMqq 1) 1005 110 315 L 740 1420 94.3 94.6 0.84 0.79 116 1LG6 317-8PMqq 1) 1100 132 315 L 740 1704 94.4 94.7 0.84 0.8 140 1LG6 318-8PMqq 1) 1270 Type of construction IM B3 approx. 1) Insulated bearing cartridge at non-drive-end NDE is recommended (order code L27). 5/14 Siemens D 81.1 · 2006
IEC Squirrel-Cage Motors Motors operating with frequency converters Self-ventilated motors with special insulation up to 690 V - Cast-iron series 1LG6 ■ Selection and ordering data (continued) Order No. Locked-rotor torque Locked-rotor current with direct starting as multiple of rated torque current torque Breakdown torque Torque class Moment of inertia Noise Measuringsurface sound pressure level at 50 Hz Sound pressure level at 50 Hz T LR /T rated I LR /I rated T B /T rated CL J L pfA L WA kgm² dB(A) DB(A) 2-pole, 3000 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 1LG6 183-2PMqq 2.5 7.2 3.4 16 0.086 67 80 1LG6 206-2PMqq 2.4 7 3.3 16 0.15 71 84 1LG6 207-2PMqq 2.5 7.2 3.3 16 0.18 71 84 1LG6 223-2PMqq 2.5 7.3 3.2 16 0.27 71 84 1LG6 253-2PMqq 2.4 6.8 3 16 0.47 71 84 1LG6 280-2PMqq 2.5 7 3 13 0.83 73 86 1LG6 283-2PMqq 2.6 7.6 3.1 13 1 73 86 1LG6 310-2PMqq 2.4 6.9 2.8 13 1.4 76 89 1LG6 313-2PMqq 2.6 7.1 2.9 13 1.6 76 89 1LG6 316-2PMqq 2.5 7.1 2.9 13 2.1 76 89 1LG6 317-2PMqq 2.5 6.9 2.8 13 2.5 76 89 4-pole, 1500 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 1LG6 183-4PMqq 2.5 6.4 3 16 0.12 60 73 1LG6 186-4PMqq 2.5 6.7 3.1 16 0.14 60 73 1LG6 207-4PMqq 2.6 6.7 3.3 16 0.23 62 75 1LG6 220-4PMqq 2.7 6.8 3 16 0.4 60 73 1LG6 223-4PMqq 2.8 6.9 3 16 0.49 60 73 1LG6 253-4PMqq 2.6 7.5 3 16 0.86 61 75 1LG6 280-4PMqq 2.5 6.8 2.9 16 1.4 67 80 1LG6 283-4PMqq 2.7 7.5 3.1 16 1.7 67 80 1LG6 310-4PMqq 2.7 7.1 2.9 16 2.3 65 79 1LG6 313-4PMqq 2.7 7.3 2.9 16 2.9 64 78 1LG6 316-4PMqq 3 7.4 3 16 3.5 64 79 1LG6 317-4PMqq 3.2 7.6 3 16 4.2 64 79 6-pole, 1000 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 1LG6 186-6PMqq 2.4 5.5 2.5 16 0.2 52 65 1LG6 206-6PMqq 2.4 5.6 2.4 16 0.29 59 72 1LG6 207-6PMqq 2.4 5.6 2.4 16 0.36 56 70 1LG6 223-6PMqq 2.8 6.5 2.9 16 0.63 54 68 1LG6 253-6PMqq 2.9 6.8 2.5 16 0.93 57 70 1LG6 280-6PMqq 3 6.8 2.7 16 1.4 58 71 1LG6 283-6PMqq 3.3 7.3 2.9 16 1.6 58 71 1LG6 310-6PMqq 2.8 7.3 3 16 2.5 61 74 1LG6 313-6PMqq 2.7 7.3 2.9 16 3.2 61 74 1LG6 316-6PMqq 2.9 7.4 2.9 16 4 61 74 1LG6 317-6PMqq 3.1 7.8 3.1 16 4.7 61 74 1LG6 318-6PMqq 3.2 7.8 3.1 16 5.4 64 77 8-pole, 750 rpm at 50 Hz, temperature class F, IP55 degree of protection, specially for operation on SIMOVERT MASTERDRIVES 1LG6 186-8PMqq 1.7 4.6 2.2 13 0.21 62 75 1LG6 207-8PMqq 2.3 5.3 2.6 13 0.37 62 75 1LG6 220-8PMqq 2.3 5.6 2.6 13 0.55 54 67 1LG6 223-8PMqq 2.4 5.8 2.8 13 0.66 58 71 1LG6 253-8PMqq 2.5 6 2.8 13 1.1 53 67 1LG6 280-8PMqq 2.3 5.7 2.3 13 1.4 58 71 1LG6 283-8PMqq 2.6 6.1 2.4 13 1.6 58 71 1LG6 310-8PMqq 2.5 6.3 2.9 13 2.5 58 72 1LG6 313-8PMqq 2.5 6.7 2.9 13 3.1 58 72 1LG6 316-8PMqq 2.4 6.3 2.8 13 3.9 57 71 1LG6 317-8PMqq 2.4 6.4 2.6 13 4.5 57 71 1LG6 318-8PMqq 2.5 6.7 2.9 13 5.3 58 72 For Order No. supplement, see page 5/16. 5 Siemens D 81.1 · 2006 5/15
Page 1 and 2:
Catalog D 81.1 • 2006 MOTORS Low-
Page 3 and 4:
Low-Voltage Motors IEC Squirrel-Cag
Page 5 and 6:
Siemens D 81.1 · 2006 3
Page 7 and 8:
and production areas to shipping. T
Page 9 and 10:
DATE: EMPLOYEE COST CENTER PAY PERI
Page 11 and 12:
Introduction 1 1/2 Guide to selecti
Page 13 and 14:
IEC Squirrel-Cage Motors Introducti
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Standard motors up to frame size 31
Page 103 and 104:
■ Overview (continued) Efficiency
Page 105 and 106:
■ Integration MICROMASTER 411/ CO
Page 107 and 108:
IEC Squirrel-Cage Motors Standard m
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
■ Selection and ordering data (co
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
■ Overview (continued) Taper pins
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Non-standard motors frame size 315
Page 239 and 240:
IEC Squirrel-Cage Motors Non-standa
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
■ Dimensional drawings Cast-iron
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Explosion-proof motors 4 4/2 Orient
Page 303 and 304:
■ Benefits The explosion-proof mo
Page 305 and 306:
IEC Squirrel-Cage Motors Explosion-
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410: IEC Squirrel-Cage Motors Explosion-
Page 419 and 420: ■ Overview Slide rails with fixin
Page 423 and 424: ■ Overview (continued) Notes on t
Page 447 and 448: Motors operating with frequency con
Page 449 and 450: IEC Squirrel-Cage Motors Motors ope
Page 459: IEC Squirrel-Cage Motors Motors ope
Page 487 and 488: Pump motors 6 6/2 Orientation 6/2 O
Page 489 and 490: IEC Squirrel-Cage Motors Pump motor
Page 491 and 492: Fan motors 7 7/2 Orientation 7/2 Ov
Page 493 and 494: IEC Squirrel-Cage Motors Fan motors
Page 495 and 496: ■ Selection and ordering data (co
Page 511 and 512:
Page 513 and 514:
IEC Squirrel-Cage Motors Fan motors
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
p Standard version † With no extr
Page 539 and 540:
Page 541 and 542:
■ Dimensional drawings Aluminium
Page 543 and 544:
Page 545 and 546:
■ Dimensional drawings Aluminium
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Compressor motors 8 8/2 Orientation
Page 553 and 554:
IEC Squirrel-Cage Motors Compressor
Page 555 and 556:
Smoke-extraction motors 9 9/2 Orien
Page 557 and 558:
IEC Squirrel-Cage Motors Smoke-extr
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Special versions Self-ventilated mo
Page 593 and 594:
Page 595 and 596:
Special versions p Standard version
Page 597 and 598:
Page 599 and 600:
Marine motors 10 10/2 Orientation 1
Page 601 and 602:
IEC Squirrel-Cage Motors Marine mot
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
■ Overview Most non-standard moto
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Standard motors up to frame size 31
Page 619 and 620:
Page 621 and 622:
Appendix 11 11/2 Overview of produc
Page 623 and 624:
IEC Squirrel-Cage Motors Appendix O
Page 625 and 626:
Page 627 and 628:
Page 629 and 630:
IEC Squirrel-Cage Motors Appendix T
Page 631 and 632:
IEC Squirrel-Cage Motors Appendix A
Page 633 and 634:
IEC Squirrel-Cage Motors Appendix C
Page 635 and 636:
IEC Squirrel-Cage Motors Appendix S
Page 637 and 638:
IEC Squirrel-Cage Motors Appendix S
Page 639 and 640:
Section 1 Section 2 IEC Squirrel-Ca
Page 641 and 642:
IEC Squirrel-Cage Motors Appendix I
Page 643 and 644:
Catalogs of the Automation and Driv
Page 645:
Low-Voltage Motors Squirrel-Cage Mo
show all

Catalog

Create successful ePaper yourself

Delete template?

Save as template?