Architectural Outdoor Lighting Solutions
Lighting Solutions Architectural Outdoor - Architectural Area Lighting
Lighting Solutions Architectural Outdoor - Architectural Area Lighting
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Architectural</strong><br />
<strong>Outdoor</strong><br />
<strong>Lighting</strong><br />
<strong>Solutions</strong><br />
A R C H I T E C T U R A L A R E A L I G H T I N G<br />
ARCHITECTURAL AREA LIGHTING 1
ENERGY EFFICIENCY<br />
The light sources employed<br />
in AAL’s fixtures are the most<br />
efficient sources commercially<br />
available today, including energy<br />
efficient LED, induction, metal<br />
halide and compact fluorescent.<br />
Its horizontal reflector models are<br />
designed to direct illumination<br />
to the ground with no stray light.<br />
The result is more light with less<br />
energy consumption.<br />
LIGHT POLLUTION<br />
AAL’s fixtures offers a full cutoff<br />
configuration which means there<br />
is no light emitted above 90<br />
degrees horizontal.<br />
LONGEVITY<br />
AAL manufactures its products<br />
to have a life span as long as<br />
the buildings and spaces they<br />
illuminate. The primary material<br />
used for all our products is<br />
aluminum to resist corrosion<br />
and the need for maintenance.<br />
Aluminum will not need the<br />
periodic refinishing required of<br />
steel products that will eventually<br />
rust and corrode. All our internal<br />
parts and fasteners are made<br />
of aluminum or stainless steel.<br />
Lamp enclosures are kept dust<br />
free and dry to prevent light<br />
degradation and maintain a high<br />
level of energy efficiency.<br />
SUSTAINABILITY<br />
AAL develops our products<br />
with recycling and resource<br />
management in mind. We<br />
recycle all incoming packaging<br />
materials. Our state of the art<br />
finishing system uses eco friendly<br />
cleansing and preparation<br />
chemicals that are harmless<br />
enough to send to the drain<br />
without further processing.<br />
Finally, AAL makes all products,<br />
with renewable materials such as<br />
aluminum and stainless steel.<br />
architectural<br />
solutions<br />
AAL’s product series are scaled in multiple sizes and<br />
employ different materials to expand the specifier’s<br />
choice in complementing architectural details and site<br />
design themes. <strong>Lighting</strong> applications include mixed-use<br />
retail, commercial, educational, healthcare, residential<br />
developments, municipal and downtown renovations.<br />
PATENTS PENDING<br />
TM<br />
MADE IN<br />
USA<br />
2<br />
AAL is a registered continuing education provider.<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
Table of Contents<br />
Period 4<br />
Contemporary 5<br />
Applications 6<br />
Floodlights 8<br />
Steplights 8<br />
Wall Sconces 9<br />
Applications 10<br />
Bollard 12<br />
Poles & Arms 13<br />
Applications 14<br />
Additional Luminaires 15<br />
Designer SSL Series Special Insert<br />
I-IV<br />
Sustainability<br />
with<br />
Style<br />
ARCHITECTURAL AREA LIGHTING,<br />
founded in 1966, is a leading provider of architectural outdoor luminaires<br />
designed and manufactured to meet the elegant aesthetic and superior<br />
performance needs of its audiences. AAL offers a broad range of products<br />
including period and contemporary area lighting, floodlights, steplights, wall<br />
Sustainability<br />
sconces, bollards, decorative poles and arms.<br />
with<br />
Style<br />
ARCHITECTURAL AREA LIGHTING<br />
ARCHITECTURAL AREA LIGHTING 3
Period<br />
Parkway Square , part of AAL’s Designer SSL Series, is a masterpiece of advanced design and<br />
innovation, capturing all the best of AAL. Featuring distinctive design elements and our newest<br />
technology, Parkway Square is available in two luminaire sizes for pole or wall mounting, and along with<br />
a matching bollard, provides an all new, whole-site package of luminaires.<br />
PATENT PENDING<br />
TM<br />
The Arts & Crafts ® family of fixtures reflect the style and warmth of the Craftsman era. These<br />
fixtures are available in two sizes for post, wall or pendant mounting, as well as a matching<br />
bollard. The Arts & Crafts refractor system includes a symmetric and an<br />
asymmetric pattern to help control glare, while a wide variety of shade<br />
materials and finishes provide customization.<br />
Providence ® , part of AAL’s Designer SSL Series<br />
are transitional style fixtures that combine modern<br />
lighting performance with aesthetics in a traditional<br />
form. Optical systems include vertical and horizontal<br />
reflectors, as well as an indirect version for even,<br />
glare-free illumination. LED upgrade kits are available for<br />
existing PROV/PROL HID installations.<br />
TM<br />
Promenade, part of AAL’s Designer SSL Series, are<br />
versatile period style luminaires that offer elegant styling<br />
with state-of-the-art optical systems. Available in a wide<br />
variety of styles and configurations to complement any<br />
historic architectural design. LED upgrade kits are available<br />
for existing PRMN/PRMS/PRMD HID installations.<br />
TM<br />
Towne Commons ® family of fixtures are available in a wide<br />
range of sizes and configurations. The precision reflector<br />
system minimizes light pollution while providing a superior<br />
lighting system for illuminating streets and pedestrian areas.<br />
Federal Globe is available in two sizes and features high<br />
performing, ContraCline ® precision optics while maintaining the<br />
timeless look of a traditional acorn form.<br />
Civic Lantern is a revitalized version of the classic Pericline that features Moldcast ®<br />
optics and incorporates improved optical solutions. Civic Lantern features an ornamental<br />
die-cast aluminum upper housing designed to allow tool-less access to the lamp<br />
compartment.<br />
4<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
Contemporary<br />
Diretto ® features field rotatable optics<br />
and tool-less accessibility. The lamp<br />
and ballast modules’ unique design<br />
has no flat surfaces and is unified by<br />
stainless steel struts.<br />
Mitre’s classic geometric<br />
form complements any<br />
architectural style. Available<br />
in two sizes, plus a wall<br />
sconce and bollard.<br />
Flex, part of AAL’s Designer SSL Series,<br />
features AAL’s exclusive MicroEmitter<br />
technology. LED upgrade kits are available<br />
for existing FH HID installations. Multiple arm<br />
designs and mounting options, including single,<br />
twin, tri shape and quad, form a versatile<br />
“create it yourself” look.<br />
Largent, part of AAL’s<br />
Designer SSL Series,<br />
incorporates timeless styling<br />
with modern technology. LED<br />
upgrade kits are available for<br />
existing SLVT HID installations.<br />
TM<br />
TM<br />
Universe Collection ® , part of AAL’s Designer SSL Series, features a unique modular<br />
design, which includes luminous element and hood design choices, making Universe one<br />
of the most versatile LED luminaires on the market. LED upgrade kits are available for<br />
existing UCM/UCL HID installations.<br />
TM<br />
The Spectra family of outdoor site lighting comes in three<br />
sizes of luminaires for post or wall mounting, as well as a<br />
matching bollard. The Spectra series offers<br />
the freedom to specify size, finish<br />
and optics to complement any<br />
design scheme. Now featuring a<br />
full cutoff hood and lens shield.<br />
The Indirect series combines contemporary styling with soft, low brightness<br />
illumination. AAL’s Indirect is available with a fixed or adjustable head and with a<br />
round or square reflector. Post and wall mount options are available. Now available<br />
with highly efficient LEDs.<br />
Cubic Indirect, available in post top or wall mount, employs the most efficient light<br />
sources available, including long lasting LED’s. The wall mount version comes standard<br />
with a hidden MR16 lamp to provide code-required path-of-egress illumination.<br />
Teneo, a sleek contemporary light column provides even illumination and aids with<br />
way finding. Made of durable acrylic or polycarbonate lens, and available in 8' to 14'<br />
configurations or as a wall mount.<br />
ARCHITECTURAL AREA LIGHTING 5
Period – Providence ®<br />
Contemporary – Cubic Indirect TM<br />
Period – Parkway SquareTM<br />
Contemporary – Universe ®<br />
6<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
Contemporary – Flex TM Period – Arts & Crafts ®<br />
Contemporary – LargentTM 7<br />
ARCHITECTURAL AREA LIGHTING<br />
7
Floodlights | Steplights<br />
FLOODLIGHTS<br />
Oculus ® is a highly versatile, controllable, precise lighting system available<br />
in three sizes. Oculus has a parabolic reflector system and co-axial lamp<br />
orientation to allow for control and efficiency. The small and very small (Nano)<br />
versions are available with energy-efficient and long life LED’s!<br />
Cypher ®<br />
features an innovative reflector/refractor optic that<br />
provides smooth, even illumination for wall washing, grazing or<br />
indirect lighting applications. Provides a smooth, even expanse of<br />
light without hot spots.<br />
Pivot ®<br />
uses energy efficient fluorescent lamps and<br />
electronic ballasts in a low-profile compact luminaire<br />
design. Suitable for wet locations. Used to<br />
wash a wall, highlight signage or indirectly<br />
illuminate a space, Pivot is available in<br />
four individual lengths, or can be<br />
used in continuous rows.<br />
STEPLIGHTS<br />
AAL’s Steplights<br />
collection brings you<br />
a full palette of designs<br />
with exceptional lighting<br />
performance. Choose from<br />
two shapes, two materials, two<br />
sizes, three fascia designs, and<br />
three mounting options to best<br />
suit your applications. AAL’s<br />
Steplights are now available<br />
with energy-efficient and<br />
long life LEDs!<br />
8<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
Special LED Insert<br />
DESIGNER<br />
series<br />
TM<br />
ARCHITECTURAL AREA LIGHTING<br />
ARCHITECTURAL AREA LIGHTING<br />
TM<br />
I
Special LED Insert<br />
Parkway Square LED harmoniously combines the ultimate in style<br />
with technological sophistication. Parkway Square LED features unique<br />
appointments and design elements coupled with powerful LEDs making it<br />
ideal for any project. Available in Pedestrian (Medium) scale. Upgrade kits<br />
also available.<br />
PATENT PENDING<br />
Providence ® LED, the first truly elegant LED luminaire on the market today. Its distinctive<br />
styling and high performance sets it apart from all others. One look is all it takes to discern<br />
that Providence LED is the epitome of quality and beauty. Available in medium and large<br />
housing scales. Upgrade kits also available.<br />
Promenade LED, a classic, traditional luminaire family with<br />
powerful LED technology. Featuring three distinctive styles, elegant<br />
options, and various mounting choices to meet the needs of any<br />
period setting. Upgrade kits also available.<br />
Largent LED, the first MicroEmitter LED post top<br />
luminaire, features clean contemporary styling that stands<br />
the test of time. Largent LED perfectly complements both<br />
modern and traditional architectural styles. Upgrade kits<br />
also available.<br />
Flex LED features a sleek contemporary design which<br />
incorporates powerful LED technology. A wide variety of<br />
arm and mounting configurations make Flex one of the<br />
most versatile LED products on the market. Upgrade kits<br />
also available.<br />
Universe ® LED, the first customizable, decorative LED luminaire with styling that<br />
transcends architectural styles past and present. The modular system of Universe,<br />
including hood styles and luminous elements, ensures a look that is in harmony with<br />
the architecture and spaces it is illuminating. Available in medium and large housing<br />
scales. Upgrade kits also available.<br />
II<br />
ARCHITECTURAL OUTDOOR DESIGNER LIGHTING SOLUTIONS SSL SERIES
Special LED Insert<br />
how it<br />
works<br />
The exclusive precision aiming system of AAL's Designer SSL Series ensures that even when<br />
looking directly at the luminaire, only one-half of the LEDs can be viewed at any given time. This<br />
results in 50% less glare when compared to other exposed, unshielded LED systems. In addition,<br />
AAL's MicroEmitters are aimed at various angles to maximize uniformity, improve comfort,<br />
and properly direct illumination to the target zone.<br />
Entire EmitterDeck<br />
is Upgradeable as LED<br />
Technology Advances<br />
Canted MicroEmitter<br />
design precisely aims each<br />
diode at 70°, 60°, or 50° angles<br />
for maximum reach and uniform<br />
illumination.<br />
Glare guard perimeter<br />
and center reflectors<br />
redirect stray light.<br />
Deeply regressed<br />
sources maximize<br />
efficiency while<br />
reducing glare.<br />
Aluminum dissipates heat<br />
away from LEDs.<br />
Factory preset aiming notches<br />
Quick-connect for easy<br />
installation<br />
EmitterDeck carrier plate<br />
Individual MicroEmitters<br />
are easily field changeable.<br />
Redirected side-candela<br />
(3) High output diodes<br />
Upper parabolic curvature<br />
redirects light below pole<br />
MicroEmitter reflector cap<br />
Redirected side-candela<br />
Lower parabolic curvature<br />
redirects light forward<br />
Targeted, precisely<br />
controlled LED<br />
illumination<br />
Illustration of a single MicroEmitter at 70° angle<br />
SPECIAL ARCHITECTURAL LED INSERT AREA LIGHTING<br />
PATENTS PENDING<br />
III
Special LED Insert<br />
simple<br />
10-minute<br />
changeout<br />
Sustainability<br />
made simple<br />
AAL’s Designer SSL Series is designed for<br />
easy installation and upgrading as technology<br />
advances. Simple field upgrades means<br />
communities can take advantage of the newest<br />
LED technology without the added expense of<br />
removing and replacing an entire luminaire.<br />
• Easy 10-minute field conversion<br />
• Upgrade LEDs as technology advances<br />
• Individual MicroEmitters are field replaceable<br />
• 70,000+ hours of useful life (L 70<br />
)<br />
• Tested under strict LM-79-08 standards<br />
• IES-LM-80 compliant LED components<br />
LEDs for Warmer<br />
Environments<br />
AAL's Designer SSL Series<br />
features our exclusive new<br />
LifeShield Protection System.<br />
Each EmitterDeck employs<br />
temperature sensors located<br />
at the most heat sensitive<br />
locations within the LED array.<br />
Each sensor sends temperature<br />
readings in regular intervals<br />
to AAL’s LifeShield monitoring<br />
device. LifeShield detects high<br />
ambient temperatures and<br />
temporarily reduces current<br />
slightly to preserve diode life.<br />
Lumen output is restored to full<br />
capacity once temperatures<br />
stabilize within acceptable limits.<br />
Turn off power and<br />
remove lamp and<br />
reflector assembly.<br />
Remove existing<br />
electronic and<br />
ballast components.<br />
Step 1 Step 2 Step 3<br />
Install new LED<br />
EmitterDeck,<br />
connect wiring plug,<br />
and turn on power.<br />
IV<br />
ARCHITECTURAL OUTDOOR DESIGNER LIGHTING SOLUTIONS<br />
SSL SERIES
Wall Sconces<br />
Providence ® Sconce utilizes the most efficient light sources, including<br />
LED’s. Available in up, down, or up + down illumination, as well as a pencil<br />
beam option, it combines modern lighting with aesthetics in a traditional<br />
form and coordinates perfectly with all other Providence family members.<br />
The Venere ® Series offers both contemporary and<br />
traditional style wall sconces to accentuate doorways<br />
and building entrances while providing egress<br />
illumination during a power failure. Now available<br />
with a full cutoff option.<br />
miniFlex offers new levels of illumination<br />
and visual design to wall sconces. They are<br />
wet label listed and easily field configured<br />
as an uplight, downlight or uplight-downlight<br />
for interior/exterior applications. mini-Flex is<br />
available for wall or post mount, and features<br />
efficient LEDs.<br />
eSconce ® and mini-eSconce are designed for<br />
exterior/interior environments. Available in up,<br />
down, or up + down illumination and include<br />
stainless steel and copper fascia panels. ADA<br />
compliant. Features efficient LEDs.<br />
MDL is a compact, unobtrusive fixture used to<br />
illuminate parking lots, stairways and canopies.<br />
MDL’s 7 distribution patterns are a perfect<br />
solution for wall and ceiling applications.<br />
ARCHITECTURAL AREA LIGHTING<br />
9
Wall Sconce – Providence ® Sconce<br />
Floodlight – Oculus ®<br />
Floodlight – Pivot ®<br />
Wall Sconce – miniFlex<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS<br />
10<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
Wall Sconce – Contemporary Venere ®<br />
Floodlight – Cypher ®<br />
ARCHITECTURAL AREA LIGHTING 11
Bollards<br />
Parkway Square bollard coordinates perfectly with other Parkway Square<br />
family members. Features unique configurable design elements such as various<br />
optical systems, hoods, and decorative screens. Install along walkways, in parks,<br />
and anywhere else wayfinding illumination is required.<br />
Providence ®<br />
bollard utilizes efficient lamp sources, including LED. Die-cast<br />
aluminum construction is corrosion resistant. Available with horizontal full<br />
cutoff optical system, and tamper resistant hardware. Coordinates with other<br />
Providence family members.<br />
Universe ®<br />
bollard features 4 luminous element options, and two hood styles. Full cutoff<br />
options available. Glass refractor lens provides IES Type 5 distribution. Coordinates with<br />
Universe small, medium and large luminaires.<br />
The Arts & Crafts ®<br />
bollards are not only beautiful, but they are also designed with the<br />
energy efficiency and optical performance required of a modern luminaire. Provides full cut<br />
off classification. Available in round or square shade styles.<br />
The Spectra bollard features a cast aluminum hood and tamper resistant hardware.<br />
A borosilicate glass element with Type 5 distribution shields the lamp. An upper reflector<br />
improves lighting performance and illuminates the hood. Coordinates with the Spectra<br />
family of luminaires.<br />
Cast Aluminum bollard complements the Towne Commons ® family of fixtures. Featuring<br />
a 90 degree cutoff reflector or Type 3 and Type 5 borosilicate glass refractors. The onepiece,<br />
high strength cast aluminum housing makes the Cast Aluminum Bollard the perfect<br />
solution to complete your site.<br />
Mitre bollard employs the most efficient light sources including LED’s. Mitre’s features<br />
include full cutoff classification and tamper resistant hardware. Coordinates with entire Mitre<br />
family of luminaires.<br />
AAL’s Traditional and Contemporary Concrete bollards are designed to be sensitive to<br />
the physical and aesthetic environment. Available with energy efficient sources, including<br />
LED, and the bases and tops are made of reinforced concrete for extreme durability.<br />
Vonda bollard, made of extruded and cast aluminum, is designed and built for beauty,<br />
durability and performance. Simple yet elegant, Vonda bollard’s patented performance<br />
Moldcast optics will define, accentuate and illuminate any outdoor environment.<br />
12<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
Poles & Arms<br />
AAL offers a large selection of either traditional<br />
or contemporary arms and poles, all designed<br />
to coordinate perfectly with AAL’s luminaires.<br />
Please visit www.aal.net for a complete listing of arms, poles, and accessories.<br />
ARCHITECTURAL AREA LIGHTING 13
1<br />
2<br />
3<br />
4<br />
5<br />
7<br />
Bollards<br />
1 Arts & Crafts ®<br />
2 Parkway Square <br />
3 Traditional Concrete<br />
4 Spectra <br />
5 Cast alluminum<br />
6 Mitre <br />
7 Vonda <br />
6<br />
7<br />
14<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS
8<br />
9 10 11<br />
Additional fixtures<br />
8 Perspect<br />
9 Dundee<br />
10 Sphere<br />
11 Pericline<br />
ARCHITECTURAL AREA LIGHTING<br />
15
<strong>Architectural</strong> Area <strong>Lighting</strong> Luminaires<br />
AAL offers site lighting where aesthetic design is as important as<br />
the illumination. Various fixture models are available with copper or<br />
stainless steel elements to complement the building’s architectural<br />
details. AAL employs the most efficient sources, including AAL’s<br />
exclusive MicroEmitter LED technology. AAL offers multiple sizes for coordinated lighting applications throughout<br />
the site. AAL also has an extensive collection of decorative arms and poles that offer limitless design freedom.<br />
PERIOD<br />
Parkway Square<br />
The Epitome of AAL innovation.<br />
Arts & Crafts ®<br />
Reflecting the style and warmth of the Craftsman era.<br />
Providence ®<br />
Legendary lighting performance in a traditional form.<br />
Promenade<br />
High performance street, area and pedestrian lighting.<br />
Towne Commons ®<br />
Balancing classic design with lighting performance.<br />
Federal Globe<br />
High performance, precision optics in traditional<br />
acorn form.<br />
CONTEMPORARY<br />
Teneo<br />
A sleek contemporary light column.<br />
Cubic Indirect<br />
Angular design that complements modern<br />
architecture.<br />
Diretto®<br />
Features field rotatable optics and tool-less access.<br />
Flex<br />
A new form of light.<br />
Indirect<br />
Project lighting with a sense of mood.<br />
Universe Collection ®<br />
A complete family of decorative, yet functional<br />
luminaires.<br />
Spectra<br />
The freedom to specify size, finish and optics to<br />
complement a design scheme.<br />
Mitre<br />
Geometric design using state-of-the-art optical<br />
systems.<br />
Largent<br />
Classic geometric form complements architectural<br />
expressions.<br />
Classic Pericline<br />
High quality, rugged commercial outdoor luminaire.<br />
DESIGNER SSL SERIES<br />
Special Insert – A complete family of decorative, high<br />
performance LED luminaires.<br />
FLOODLIGHTS<br />
Oculus ®<br />
Elevating precision floodlighting to a new level.<br />
Cypher ®<br />
Innovative reflector/refractor optics provide smooth even<br />
illumination.<br />
Pivot ®<br />
Innovative single and continuous row precision<br />
floodlighting.<br />
STEPLIGHTS<br />
Steplights<br />
Designed for elegance in harsh environments.<br />
WALL SCONCE<br />
Providence ® Sconce<br />
Features four precise optical systems and LEDs.<br />
Venere ® Series<br />
Contemporary and traditional style wall sconces to<br />
accentuate and provide egress illumination.<br />
miniFlex<br />
When aesthetics are as important as illumination quality.<br />
mini•eSconce<br />
ADA compliant, and designed for exterior/interior<br />
environments.<br />
eSconce ®<br />
Versatile, high performance lighting with a decorative flare.<br />
MDL<br />
A compact, unobtrusive fixture to illuminate wall and ceiling<br />
applications.<br />
PCL<br />
High performance wall packs available in two<br />
complementary sizes.<br />
BOLLARDS<br />
Parkway Square Bollard<br />
Coordinates perfectly with other Parkway Square family<br />
members.<br />
Providence ® Bollard<br />
Utilizes the most efficient light sources, including LED’s.<br />
Universe ® Bollard<br />
Coordinates with Universe small, medium and large<br />
luminaires.<br />
Cast Aluminum Bollard<br />
Complements the Towne Commons ® family of fixtures.<br />
Mitre Bollard<br />
Employs the most efficient light sources including LED's.<br />
Traditional & Contemporary Concrete Bollards<br />
Complete line of architecturally designed concrete bollards.<br />
Vonda Bollard<br />
Designed and built for beauty, durability and performance.<br />
Arts & Crafts ® Bollard<br />
Beautifully designed with energy efficiency and optical<br />
performance.<br />
Spectra Bollard<br />
Features a cast aluminum hood and tamper resistant<br />
hardware.<br />
16<br />
<strong>Architectural</strong> Area <strong>Lighting</strong><br />
16555 East Gale Ave. | City of Industry | CA 91745<br />
T 626.968.5666 | F 626.369.2695 | www.aal.net | www.aal.net/aal/ls611.html<br />
© 2009 <strong>Architectural</strong> Area <strong>Lighting</strong> | Made in the USA | Rev LS 04.2011<br />
Printed on recycled paper<br />
ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS